Database Info

Case fit compatibility?

Hi All
Will the Mobi hard rubber plastic case (https://shop.htcpedia.com/htc-sensation-hard-snap-on-case.html) fit inside the HTC Horizontal Leather Pouch (https://shop.htcpedia.com/htc-messenger-side-case-with-belt-clip.html)

I have the red mobi case which I bought from another site and love the fit and finish of it. The case does not add a lot of bulk but trying it with the case, I would incline to say no because most of HTC cases are very form fitting. However, in one of the reviews, it said that the case mate case fits it. All I can say is to just try it out. Post pics if you do get them.

The HTC case is also not specifically made for the Sensation. It fits the Evo as well which I think is a bit bigger?

Evo
122 x 66 x 13 mm
Sensation
126.1 x 65.4 x 11.3 mm
According to that, the Sensation is longer but thinner and just as wide.

kpjimmy said:
Evo
122 x 66 x 13 mm
Sensation
126.1 x 65.4 x 11.3 mm
According to that, the Sensation is longer but thinner and just as wide.
Click to expand...
Click to collapse
Guess we'll hope for the best

I had a problem finding a case to fit my Sensation after installing the Case Mate Tough case. I finally found a pouch made by Nite Ize that fit.

Mobi hard case does not fit in OEM Horizontal Leather Holster

[Q] do cases of the s 9000 fit on sl 9003?

so i'm browsing the ebay for some good rigid and tough cases like case-mate and otterbox but the good ones are for the s 9000... the dimensions of the sl 9003 are123.7 x 64.2 x 10.6 mm and the s 9000s' 122.4 x 64.2 x 9.9 mm (only 1.3mm wider and 0.7 thicker). What do you think? will the cases of the galaxy 9000 will fit?

nickargas said:
so i'm browsing the ebay for some good rigid and tough cases like case-mate and otterbox but the good ones are for the s 9000... the dimensions of the sl 9003 are123.7 x 64.2 x 10.6 mm and the s 9000s' 122.4 x 64.2 x 9.9 mm (only 1.3mm wider and 0.7 thicker). What do you think? will the cases of the galaxy 9000 will fit?
Click to expand...
Click to collapse
no it doesnt fit...please read the forum before posting questions..it has been answered before also..

Nope. i9000 is a little bit smaller than i9003.

No because SL have 10.6 mm and S just 9.9 mm

Depends of case type. Rigid ones won't 100%, soft could fit.
I bought a cheap "i9000" soft protective shell and it fits perfectly

it won't fit well mate

leather pouch
hey guys im looking for the original samsung genuine pouch.. any ideas?

nickargas said:
so i'm browsing the ebay for some good rigid and tough cases like case-mate and otterbox but the good ones are for the s 9000... the dimensions of the sl 9003 are123.7 x 64.2 x 10.6 mm and the s 9000s' 122.4 x 64.2 x 9.9 mm (only 1.3mm wider and 0.7 thicker). What do you think? will the cases of the galaxy 9000 will fit?
Click to expand...
Click to collapse
nah it doesnt cz of the charging pt...for i9000 its at the bottom...and it feels quite uneasy for the fone to slide it easily...

thank you all for your time answering my question...i've tried putting a 9000 hard casemate housing which involved a soft and a hard case and the buttons wouldn't quite fit properly... you were right...

DaiTeM said:
Depends of case type. Rigid ones won't 100%, soft could fit.
I bought a cheap "i9000" soft protective shell and it fits perfectly
Click to expand...
Click to collapse
yeah it will fit but i think that the hole for the mic in the case does not match with the i9003

HTC One & Xperia ZL leather pouches for Nexus 4?

I'm looking for a good leather pull tab that works with a Nexus 4 with the official bumper on and I got a few cases up with dimensions close or similar to the bumper
HTC One - 137.4 x 68.2 x 9.3 mm
Xperia ZL - 131.6 x 69.8 x 9.8 mm
Nexus 4 Bumper - 133.9 x 68.7 x 9.1 mm
With that in mind the Htc one would be a bit tight width wise but by a very little amount, would it still pocket nicely? Xperia XL falls short height wise but would the difference revere much of the phone if in a leather pouch?
Has anyone tried a leather pouch or any pouch from these phones on their Nexus 4?

Considering ordering the zl one after seeing the phones shape hands on
Sent from my Nexus 4 using xda premium

Best Case/Holster Combos

I see tons of case threads but never a thread on holsters. I always find myself coming back to using a holster and so far the best (by far IMHO) is Seidio.
I would love to see a holster made for the Ringke SLIM Case or the Spigen Thin Fit. Anyone know of a great slim-fitting case/holster combo please post it here :fingers-crossed:

I have this holster/kickstand case combo for the S3 and am hoping to find something similar for the Note 4. Seidio Surface/Surface Holster looks pretty nice, but way pricier than what I have now. My main concern is I've read a couple of reviews saying that the metal kickstand blocks NFC.

Noxious Ninja said:
I have this holster/kickstand case combo for the S3 and am hoping to find something similar for the Note 4. Seidio Surface/Surface Holster looks pretty nice, but way pricier than what I have now. My main concern is I've read a couple of reviews saying that the metal kickstand blocks NFC.
Click to expand...
Click to collapse
Wow, so I see Seidio hasn't dropped their prices in the several years since I actually bought a case from them. Companies like them have huge balls to keep their prices this high in this day and age where people have more of a clue what phone cases should actually cost.
I'm shocked that companies like this are still in business for selling a piece of plastic for over $30. But someone must be buying them. :what:

WizeGuyDezignz said:
Wow, so I see Seidio hasn't dropped their prices in the several years since I actually bought a case from them. Companies like them have huge balls to keep their prices this high in this day and age where people have more of a clue what phone cases should actually cost.
I'm shocked that companies like this are still in business for selling a piece of plastic for over $30. But someone must be buying them. :what:
Click to expand...
Click to collapse
Yeah, for that price I could get the ZeroLemon extended battery which comes with a case and holster!

Seidio is expensive but purchasing through Amazon or right now using their 25% off code to buy from their website helps out.
Good through Monday code is NOVEMBER25

WizeGuyDezignz said:
Wow, so I see Seidio hasn't dropped their prices in the several years since I actually bought a case from them. Companies like them have huge balls to keep their prices this high in this day and age where people have more of a clue what phone cases should actually cost.
I'm shocked that companies like this are still in business for selling a piece of plastic for over $30. But someone must be buying them. :what:
Click to expand...
Click to collapse
I know I help keep them afloat! ...But like others have said, if you wait a month that $50 dollar combo can be had on Amazon for $25-$30

Thanks for bringing this topic up. I've been doing a little research on this myself as there are a couple cases currently available for our N4s that I like, but unfortunately most of them don't have holsters available. When I had my GS3, I used a Seidio case/holster combo and really liked their product, but I particularly liked the holster. The case I settled on for my N4 is the one produced by Caseology (see link below so you know which one I'm talking about), so the search began to find a Seidio holster that might fit it. I contacted both Caseology and Seidio to get dimensions for their respective cases. Below are the dimensions they sent (in inches):
Caseology: 6.19 (L) x 3.31 (W) x 0.44 (H)
Seidio Dilex: 6.23 (L) x 3.35 (W) x 0.57 (H)
Seidio Surface: 6.15 (L) x 3.23 (W) x 0.52 (H)
Seidio Capsa: 6.20 (L) x 3.40 (W) x 0.60 (H)
I decided on the holster that can be purchased with the Dilex case based on the dimensions. It arrived today and I'm very happy to find that it works very well with the Caseology case! The fit is snug, but certainly not overly so and the spring clip of the holster closes on the case and keeps it quite secure. I'll have to see how things go over the next few days to get some practical use out of each, but I don't anticipate being disappointed in the case, holster, or how they work together.
http://www.amazon.com/Caseology-Sam...d=1417812636&sr=8-3&keywords=caseology+note+4
Edit: Just noticed that Caseology hasn't figured out that Verizon is special and has to have their bottom left mic hole in a different location than the other carriers. A Dremel with a very small diamond sanding bit fixed it quite nicely. It looks like it came that way.

nytmare1 said:
Thanks for bringing this topic up. I've been doing a little research on this myself as there are a couple cases currently available for our N4s that I like, but unfortunately most of them don't have holsters available. When I had my GS3, I used a Seidio case/holster combo and really liked their product, but I particularly liked the holster. The case I settled on for my N4 is the one produced by Caseology (see link below so you know which one I'm talking about), so the search began to find a Seidio holster that might fit it. I contacted both Caseology and Seidio to get dimensions for their respective cases. Below are the dimensions they sent (in inches):
Caseology: 6.19 (L) x 3.31 (W) x 0.44 (H)
Seidio Dilex: 6.23 (L) x 3.35 (W) x 0.57 (H)
Seidio Surface: 6.15 (L) x 3.23 (W) x 0.52 (H)
Seidio Capsa: 6.20 (L) x 3.40 (W) x 0.60 (H)
I decided on the holster that can be purchased with the Dilex case based on the dimensions. It arrived today and I'm very happy to find that it works very well with the Caseology case! The fit is snug, but certainly not overly so and the spring clip of the holster closes on the case and keeps it quite secure. I'll have to see how things go over the next few days to get some practical use out of each, but I don't anticipate being disappointed in the case, holster, or how they work together.
http://www.amazon.com/Caseology-Sam...d=1417812636&sr=8-3&keywords=caseology+note+4
Edit: Just noticed that Caseology hasn't figured out that Verizon is special and has to have their bottom left mic hole in a different location than the other carriers. A Dremel with a very small diamond sanding bit fixed it quite nicely. It looks like it came that way.
Click to expand...
Click to collapse
Yea, I've done the same thing in the past, use Seidio holster with Ringke case. I had to file the inside of the spring clip to get it the correct shape, but other than that it worked good. I just can't figure out why no other companies fab a good holster!

I love mine : http://www.amazon.com/gp/product/B00OGU9HZY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

nytmare1 said:
Thanks for bringing this topic up. I've been doing a little research on this myself as there are a couple cases currently available for our N4s that I like, but unfortunately most of them don't have holsters available. When I had my GS3, I used a Seidio case/holster combo and really liked their product, but I particularly liked the holster. The case I settled on for my N4 is the one produced by Caseology (see link below so you know which one I'm talking about), so the search began to find a Seidio holster that might fit it. I contacted both Caseology and Seidio to get dimensions for their respective cases. Below are the dimensions they sent (in inches):
Caseology: 6.19 (L) x 3.31 (W) x 0.44 (H)
Seidio Dilex: 6.23 (L) x 3.35 (W) x 0.57 (H)
Seidio Surface: 6.15 (L) x 3.23 (W) x 0.52 (H)
Seidio Capsa: 6.20 (L) x 3.40 (W) x 0.60 (H)
I decided on the holster that can be purchased with the Dilex case based on the dimensions. It arrived today and I'm very happy to find that it works very well with the Caseology case! The fit is snug, but certainly not overly so and the spring clip of the holster closes on the case and keeps it quite secure. I'll have to see how things go over the next few days to get some practical use out of each, but I don't anticipate being disappointed in the case, holster, or how they work together.
http://www.amazon.com/Caseology-Sam...d=1417812636&sr=8-3&keywords=caseology+note+4
Edit: Just noticed that Caseology hasn't figured out that Verizon is special and has to have their bottom left mic hole in a different location than the other carriers. A Dremel with a very small diamond sanding bit fixed it quite nicely. It looks like it came that way.
Click to expand...
Click to collapse
Can you post some pics if possible? I'm getting the ringke slim armor and am semi interested in the spring clip from seidio. Thanks!
Sent from my SM-N910V using Tapatalk

xeks said:
Can you post some pics if possible? I'm getting the ringke slim armor and am semi interested in the spring clip from seidio. Thanks!
Click to expand...
Click to collapse
I won't be able to tonight, but will try to get some pics posted tomorrow night. I've been carting around my N4 in the Caseology case using the Seidio Dilex holster for three days and it's work very well so far. It's bit of a snug fit at the base of the holster, but not overly so. Actually, I like the fact that it's held in there a little on the tight side. It keeps from wiggling around.
If the dimensions of the Ringke case you're looking to get is anything close to the Dilex or the Caseology cases... you should be good with the Dilex holster.

nytmare1 said:
I won't be able to tonight, but will try to get some pics posted tomorrow night. I've been carting around my N4 in the Caseology case using the Seidio Dilex holster for three days and it's work very well so far. It's bit of a snug fit at the base of the holster, but not overly so. Actually, I like the fact that it's held in there a little on the tight side. It keeps from wiggling around.
If the dimensions of the Ringke case you're looking to get is anything close to the Dilex or the Caseology cases... you should be good with the Dilex holster.
Click to expand...
Click to collapse
According to the site, it adds 1.5mm thickness. Not sure if that's all the way around or not.
Sent from my SM-N910V using Tapatalk

Holster for OnePlus 6?

Has anyone come across a good fit yet. I'm sure I'll purchase the phone and factory sandstone protective case. Anyone have that mix and a holster?

This is the belt clip I use. I don't care much for the case inself. I picked up "Rugged Armor Ulimate Experience" case which works perfectly with the belt clip. I don't like cases with kick-stands.
https://www.amazon.com/gp/aw/d/B07DFR5F7Z?psc=1&ref=yo_pop_mb_pd_title

Mike02z said:
This is the belt clip I use. I don't care much for the case inself. I picked up "Rugged Armor Ulimate Experience" case which works perfectly with the belt clip. I don't like cases with kick-stands.
https://www.amazon.com/gp/aw/d/B07DFR5F7Z?psc=1&ref=yo_pop_mb_pd_title
Click to expand...
Click to collapse
Appreciate it.... Looking for one I can use with the factory case though. I know years ago I purchased the OnePlus one and someone had a great fit for it that was really for another phone. Looking for something close to that.

cdotjames said:
Appreciate it.... Looking for one I can use with the factory case though. I know years ago I purchased the OnePlus one and someone had a great fit for it that was really for another phone. Looking for something close to that.
Click to expand...
Click to collapse
The clip he put should work fine. The factory case and that encased case will be very close to same size. And encased belt clips are one if the best you can get. I always buy an encased belt clip for all my phones and it fits multiple different cases.

strictlyphat said:
The clip he put should work fine. The factory case and that encased case will be very close to same size. And encased belt clips are one if the best you can get. I always buy an encased belt clip for all my phones and it fits multiple different cases.
Click to expand...
Click to collapse
Many thanks. For $12.94 I can't go wrong anyway. Thanks!

cdotjames said:
Many thanks. For $12.94 I can't go wrong anyway. Thanks!
Click to expand...
Click to collapse
Quick update... holster definitely will not work with the sandstone case. A little too loose.

There's also Seidio or Platinum (Bedt Buy) holsters that work. Compare the holsters they have and use the one closest to the size of the oneplus 6.

cdotjames said:
Quick update... holster definitely will not work with the sandstone case. A little too loose.
Click to expand...
Click to collapse
Man that sucks. I may order a s9plus belt holster and see if that works. It's slightly shorter .09. And it's gonna be one of those with the top clip.instead of a slide in case.

strictlyphat said:
Man that sucks. I may order a s9plus belt holster and see if that works. It's slightly shorter .09. And it's gonna be one of those with the top clip.instead of a slide in case.
Click to expand...
Click to collapse
Try using a small piece of weather foam to take up the gap.

cdotjames said:
Has anyone come across a good fit yet. I'm sure I'll purchase the phone and factory sandstone protective case. Anyone have that mix and a holster?
Click to expand...
Click to collapse
I bought a beautiful navy blue saffiano leather holster from Burkley Leather. It's made for the iPhone 8plus but the OnePlus 6 is the same size, trivially. And it really pops with the one plus 6 red!
https://www.burkleycase.com/magneti...TPjRlPOpOsDWtQlWnw22x-BOr_JoBfqhoC4VcQAvD_BwE

Saw a really nice holster you might like.
I was rummaging through an antique store downtown.
let me know.

typhoonikan said:
I bought a beautiful navy blue saffiano leather holster from Burkley Leather. It's made for the iPhone 8plus but the OnePlus 6 is the same size, trivially. And it really pops with the one plus 6 red!
https://www.burkleycase.com/magneti...TPjRlPOpOsDWtQlWnw22x-BOr_JoBfqhoC4VcQAvD_BwE
Click to expand...
Click to collapse
That's a pouch. We want a holster

cdotjames said:
Has anyone come across a good fit yet. I'm sure I'll purchase the phone and factory sandstone protective case. Anyone have that mix and a holster?
Click to expand...
Click to collapse
Follow up...
Just got the supcase unicorn beetle style case on Amazon for 11$. It fits vertically in my holster from my iPhone 7 plus encased slimshield w/holster. There is a quarter inch lateral movement but it's secure that it won't fall out. Just some shimmy.
Case
OnePlus 6 Case, SUPCASE Unicorn Beetle Style Series Premium Hybrid Protective Clear Case for OnePlus 6 2018 Release, Retail Package (Black) https://www.amazon.com/dp/B07F2XHG96/ref=cm_sw_r_cp_apa_S-MzBb7B74404
Holster
Encased iPhone 7 Plus Belt Case - (SlimShield Series) Secure-fit Holster Clip & Tough Cover Combo for iPhone 7 Plus 5.5" (Smooth Black) https://www.amazon.com/dp/B01LYCHZPM/ref=cm_sw_r_cp_apa_IaNzBb86028E4
I know not ideal.but I use a holster alot and this is satisfactory for me until encased decides to make more options.

strictlyphat said:
Follow up...
Just got the supcase unicorn beetle style case on Amazon for 11$. It fits vertically in my holster from my iPhone 7 plus encased slimshield w/holster. There is a quarter inch lateral movement but it's secure that it won't fall out. Just some shimmy.
Case
OnePlus 6 Case, SUPCASE Unicorn Beetle Style Series Premium Hybrid Protective Clear Case for OnePlus 6 2018 Release, Retail Package (Black) https://www.amazon.com/dp/B07F2XHG96/ref=cm_sw_r_cp_apa_S-MzBb7B74404
Holster
Encased iPhone 7 Plus Belt Case - (SlimShield Series) Secure-fit Holster Clip & Tough Cover Combo for iPhone 7 Plus 5.5" (Smooth Black) https://www.amazon.com/dp/B01LYCHZPM/ref=cm_sw_r_cp_apa_IaNzBb86028E4
I know not ideal.but I use a holster alot and this is satisfactory for me until encased decides to make more options.
Click to expand...
Click to collapse
Many thanks. I'll give it a try. A phone in each pocket is becoming a little too much.

strictlyphat said:
Follow up...
Just got the supcase unicorn beetle style case on Amazon for 11$. It fits vertically in my holster from my iPhone 7 plus encased slimshield w/holster. There is a quarter inch lateral movement but it's secure that it won't fall out. Just some shimmy.
Case
OnePlus 6 Case, SUPCASE Unicorn Beetle Style Series Premium Hybrid Protective Clear Case for OnePlus 6 2018 Release, Retail Package (Black) https://www.amazon.com/dp/B07F2XHG96/ref=cm_sw_r_cp_apa_S-MzBb7B74404
Holster
Encased iPhone 7 Plus Belt Case - (SlimShield Series) Secure-fit Holster Clip & Tough Cover Combo for iPhone 7 Plus 5.5" (Smooth Black) https://www.amazon.com/dp/B01LYCHZPM/ref=cm_sw_r_cp_apa_IaNzBb86028E4
I know not ideal.but I use a holster alot and this is satisfactory for me until encased decides to make more options.
Click to expand...
Click to collapse
Found another one that's pretty nice.
https://m.ebay.com/itm/Clear-Case-A...-A6000-A6003-/292619675174?_mwBanner=1&_rdt=1

cdotjames said:
Found another one that's pretty nice.
https://m.ebay.com/itm/Clear-Case-A...-A6000-A6003-/292619675174?_mwBanner=1&_rdt=1
Click to expand...
Click to collapse
Yeah I saw that but I don't like the "slide in" type. I prefer the clip in.

strictlyphat said:
Yeah I saw that but I don't like the "slide in" type. I prefer the clip in.
Click to expand...
Click to collapse
Your mix is definitely the best.... Many thanks!

cdotjames said:
Your mix is definitely the best.... Many thanks!
Click to expand...
Click to collapse
Did u get both? If so I feel like I really helped you lol

strictlyphat said:
Did u get both? If so I feel like I really helped you lol
Click to expand...
Click to collapse
You definitely helped me. I did get both and I really appreciate it. Hopefully it helps others in the forum as well.

cdotjames said:
You definitely helped me. I did get both and I really appreciate it. Hopefully it helps others in the forum as well.
Click to expand...
Click to collapse
Bad news. I returned the case because of the buttons. They're too flat. I'm gonna try a rhinoshield crashguard. Hopefully it fits in there too