Database Info

Galaxy Nexus Surface Holster = Perfect Fit

http://www.amazon.com/Seidio-HLSSGNLASC-Surface-Holster-Samsung/dp/B006H4DE8S/ref=sr_1_7?s=wireless&ie=UTF8&qid=1353010277&sr=1-7&keywords=seidio+spring+clip+nexus
Perfect fit for our naked Nexus 4, as I'm rocking one right now.

Interesting -- the N4 is just enough bigger than the GNex to fill up the room that would be occupied by the Surface case, eh? If I hadn't already bought a belt holster, I might well have been interested; I had a Seidio belt clip for my N1 and liked it a lot.. Can you post a photo or two of the phone in the holster? Let us know how it does, i.e., if you have any accidents where the phone springs out accidentally or the like.

wmm said:
Interesting -- the N4 is just enough bigger than the GNex to fill up the room that would be occupied by the Surface case, eh? If I hadn't already bought a belt holster, I might well have been interested; I had a Seidio belt clip for my N1 and liked it a lot.. Can you post a photo or two of the phone in the holster? Let us know how it does, i.e., if you have any accidents where the phone springs out accidentally or the like.
Click to expand...
Click to collapse
I will try to put up some pics tonight..... it honestly fits like a glove inside.... its not going anywhere once inside.

This is great, although by the time my N4 arrives my chinese s cases chould be here. I hope more people report what non N$ cases fit though.

This could be a good option...

galaxys said:
This could be a good option...
Click to expand...
Click to collapse
for those interested, I just received this case in hopes of using it with the nexus4 like the op claims...
it does NOT fit. the holster is much too large for the naked phone

You're right, I really screwed up. I'm terribly sorry.
I have a lot of holsters, and must have confused myself.
I just checked, and it looks like the HTC Sensation Seidio Holster fits the Nexus 4 perfectly, but the Sensation Surface Holster, not the naked.
Really sorry, and hope you can resolve this. Feel terrible.
Zivman3 said:
for those interested, I just received this case in hopes of using it with the nexus4 like the op claims...
it does NOT fit. the holster is much too large for the naked phone
Click to expand...
Click to collapse

Tested with my Active holster for my HTC Sensation and works well with it naked. But not to be a buzzkill, but I do not want my N4 naked in the holster. I have dropped my sensation from this very holster with cases on. I am going to get the Galaxy Nexus Surface holster to see if it fits with a tpu case on or not.

caliber177 said:
http://www.amazon.com/Seidio-HLSSGNLASC-Surface-Holster-Samsung/dp/B006H4DE8S/ref=sr_1_7?s=wireless&ie=UTF8&qid=1353010277&sr=1-7&keywords=seidio+spring+clip+nexus
Perfect fit for our naked Nexus 4, as I'm rocking one right now.
Click to expand...
Click to collapse
I can't believe they want $19 for it, I bought one for my Rezound and it was $4.

Zivman3 said:
for those interested, I just received this case in hopes of using it with the nexus4 like the op claims...
it does NOT fit. the holster is much too large for the naked phone
Click to expand...
Click to collapse
I am getting the Surface holster for the gnex-at the office waiting for me tomorrow am. Anyone know if it'll fit with a tpu case on yet?

Seidio has Surface and Active cases with kickstands that are in development right now in addition to a holster that will work with them both. They don't come cheap though. I have used their products on a number of my phones and I have to say that they are worth every penny. Very protective, the fit is awesome and they even make charging stations that work with the cases on. I reckon by the time I actually get my phone, the Seidio cases will be available.

I'm using my seido active holster (90% sure it is the active holster, the one with a rubber and hard plastic parts for the phone) with my N4 with a tpu case on it and the holster fits almost perfect.

slydog43 said:
I'm using my seido active holster (90% sure it is the active holster, the one with a rubber and hard plastic parts for the phone) with my N4 with a tpu case on it and the holster fits almost perfect.
Click to expand...
Click to collapse
Pics?
I have the Seidio Surface one for the Gnex and it doesn't fit with a tpu case on. It's a little loose with the N4 naked, but that's a no go for me.

Just an update. I am getting the Diztronic Ultra Thin One Piece Hard Shell case as well to see if it will fit the Surface holster. Will report back next week or whenever I get it in.
Here is the linkage to the 'thinner' case. Keep in mind it doesn't cover the bottom or top of the phone. Alas the some of the "thinner" aspects of the case. Remember to use XDA for a promo coupon code if you haven't done so yet. The code can only be used once,and I already used it on my other TPU lol.
http://tpu-cases.com/index.php?main_page=product_info&cPath=46_76&products_id=306

I think I'll be picking up one of the Seidio Surface/Holster combos when they're released. The Nexus 4 is an awesome looking phone, but the back is so slick it ends up sliding away on it's own. This also seems to be one of the only ways to get a good holster for the phone.
http://www.seidioonline.com/lg-nexus-4-surface-metal-kickstand-case-holster-p/bd2-hr3lgn4k-bk.htm

Where are the cases?

Pre ordered the Moto X Pure. But looking for a nice tpu or bybrid case. Usually, there's a lot of cases available for a phone before the phone releases. But not the Pure/Style. I know there's a a few on amazon etc... But those cases are junk. Cheap made and will fall apart in a week. I see that incipio has one and ugly otterbox. But never really liked incipio and otterbox. But where are, seidio, Griffin, Belkin, UAG, Spigen???

I doubt UAG will have a case for the moto x pure but I would love it if they did.
Sent from my Nexus 5 using XDA Free mobile app

Can't find any either....
Sent from my A0001 using Tapatalk

Most of the high quality, big name companies didn't make for the previous 2nd Generation model, so they probably aren't for this. Maybe they have some kind of pay to play scheme and Moto isn't paying.

Well, for right now, I went for the MoKo. Less then $10. Hope it will hold till UAG or Spigen releases one. Or Supcase...

Is this case any good: http://www.amazon.com/MOTO-Pure-Case-2015-Style/dp/B01355VPT6

Fantach said:
Is this case any good: http://www.amazon.com/MOTO-Pure-Case-2015-Style/dp/B01355VPT6
Click to expand...
Click to collapse
People seem to like the variant of it for the Moto G or whatever. The Amazon reviews are about the best feedback you're going to get for the moment. I bought a number of $3-4+shipping cases myself. I don't feel like buying a $30 Incipio case at the moment... And my old phone is still using a cheap case I put on it back in 2012, so I've had good experiences with the cheaper ones anyway.

robjbw said:
Well, for right now, I went for the MoKo. Less then $10. Hope it will hold till UAG or Spigen releases one. Or Supcase...
Click to expand...
Click to collapse
It will hold. I have had that case for quite a few phones. It is just a bit bulky. I like it for phones under 5 inches and it was OK on the 2014 moto X.
Sent from my Nexus 6 using XDA Free mobile app

Has anyone seen any cases like the flip shell for the Moto G? Most of these add to the already bulky look of the phone (and don't protect the screen).

I ordered this one (http://amzn.com/B013HSX5L2). I'm actually looking forward to the transparent back. I got the Ash wood back.

I ordered this case before my MXP arrived and had it waiting. I wish it was a little snugger fit, but it'll do for $8 shipped until something better comes along.
(Yes, the volume buttons are labeled incorrectly)
http://www.amazon.com/gp/product/B012Y66O5M?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

robjbw said:
Well, for right now, I went for the MoKo. Less then $10. Hope it will hold till UAG or Spigen releases one. Or Supcase...
Click to expand...
Click to collapse
I just got my Moko. I'm not a fan. So far it seems well made, but the holster is backwards when I wear it on my left side.
In addition, it's off-center, so I'm always putting the phone in the wrong way, and the phone can't go in with screen facing out, which makes the the much more stable holster clipstand useless.

ErikHellstrom said:
I just got my Moko. I'm not a fan. So far it seems well made, but the holster is backwards when I wear it on my left side.
In addition, it's off-center, so I'm always putting the phone in the wrong way, and the phone can't go in with screen facing out, which makes the the much more stable holster clipstand useless.
Click to expand...
Click to collapse
Waiting for my SUPCASE Hybrid to come in. Looking into getting a Seidio Note 4 or Note 5 holster since the Note 4/5 is about the same size as MXPE. I think there is a 0.02mm difference between Surface version and Dilex.

Case
Hi,
Just received the Incipio DualPro case. Fit is good, buttons respond well.
Decent dual layer protection. Back is a little slick/slippery.
I'll use it for a while and see how I like it,
Ken
Here it is: http://www.incipio.com/cases/smartp...ualpro-case-motorola-moto-x-pure-edition.html

I got the incipio octane and i really like it. The incipio dual pro is too slick to hold on to though

Does anyone have a pic of the Incipio Octane with frost back?
I'll give you a thank for it lol

Are there any bumpers besides the one that comes in the box..preferably TPU? The one that comes with the phone is a hard plastic that makes the vibration super loud on a desk, but I also don't want to cover the case with a full back.
Anybody found one?

junkimchi said:
Does anyone have a pic of the Incipio Octane with frost back?
I'll give you a thank for it lol
Click to expand...
Click to collapse
Its been posted in the Incipio case thread
Translucent smoke
http://forum.xda-developers.com/showpost.php?p=62794367&postcount=17
http://forum.xda-developers.com/showpost.php?p=62838754&postcount=28
Translucent frost
http://forum.xda-developers.com/showpost.php?p=62884470&postcount=35
http://amzn.to/1OkP9eR

clownfart said:
Are there any bumpers besides the one that comes in the box..preferably TPU? The one that comes with the phone is a hard plastic that makes the vibration super loud on a desk, but I also don't want to cover the case with a full back.
Anybody found one?
Click to expand...
Click to collapse
Case-mate has a few coming soon @ http://www.case-mate.com/collections/moto-x-pure-edition-cases

pinoymutt said:
Case-mate has a few coming soon @ http://www.case-mate.com/collections/moto-x-pure-edition-cases
Click to expand...
Click to collapse
Thanks for the link, finally a nice bumper case that will protect my phone and I can still enjoy my red leather back.

Nexus 6p Belt Case Thread

Received my first one today:
http://www.amazon.com/gp/product/B015K7XRUM?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
it DOES have the cutouts for laser focus. I'll post pics later but it looks pretty solid
also have this one on order, should arrive monday:
http://www.amazon.com/Nexus-6P-Case..._UL160_SR160,160_&refRID=17XRNTWMKP41B8HM8E2B

I already have the second case in blue, it's very nice
Nexus 6p

i don't know man i buy this moko case every year expecting the worst and it always manages to impress me. pretty damn good case. also works great with the skintomi tempered glass screen protector. as an added bonus, the cutout for the fingerprint sensor is very large. doesn't interfere at all
http://www.amazon.com/Nexus-6P-Case..._UL160_SR160,160_&refRID=17XRNTWMKP41B8HM8E2B

http://www.amazon.com/gp/product/B00WT1308C?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
That is what I ordered. It should arrive tomorrow. I'm a fan of the TGSP/Skin combo so a universal case like this is my preference. I find those combo cases too bulky for my small hands.

ReaperNY said:
http://www.amazon.com/gp/product/B00WT1308C?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
That is what I ordered. It should arrive tomorrow. I'm a fan of the TGSP/Skin combo so a universal case like this is my preference. I find those combo cases too bulky for my small hands.
Click to expand...
Click to collapse
I'm using a generic horizontal case. Please post how you like that vehicle one

indianajonze said:
Received my first one today:
http://www.amazon.com/gp/product/B015K7XRUM?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
it DOES have the cutouts for laser focus. I'll post pics later but it looks pretty solid
also have this one on order, should arrive monday:
http://www.amazon.com/Nexus-6P-Case..._UL160_SR160,160_&refRID=17XRNTWMKP41B8HM8E2B
Click to expand...
Click to collapse
I am a long time Otterbox Defender user, but am considering the LK and MOKO cases you listed. I also am really interested in the Supcase Unicorn Beetle Pro. There is this I-Blason Prime Series as well. Also Seidio say they are working a case, but have not said what model.
I ordered this Story Leather Belt Clip Holster when I need something stylish and use the phone bare or with a simple skin. Now if it would only get here after 2 shipping delays.

dwswager said:
I am a long time Otterbox Defender user, but am considering the LK and MOKO cases you listed. I also am really interested in the Supcase Unicorn Beetle Pro. There is this I-Blason Prime Series as well. Also Seidio say they are working a case, but have not said what model.
I ordered this Story Leather Belt Clip Holster when I need something stylish and use the phone bare or with a simple skin. Now if it would only get here after 2 shipping delays.
Click to expand...
Click to collapse
the i-blason is just about identical to the moko, but the one for the nexus 6 last year used a plastic that i found to be VERY slippery in my hand. i tried it for about 2 weeks and didn't like the feel at all. the supcase is interesting, but i don't need an integrated screen protector. would rather use a nice tempered glass solution
one addendum to the moko (and i-blason) that i forgot to mention earlier...it still has this design issue where it's made for left-handed people. the phone attaches to the belt clip in the opposite way that a right handed person would use it. it's definitely not a show stopper, but it's annoying. i'll use it for the next couple of weeks and report back, but aside from this it's quite solid so far

dwswager said:
I am a long time Otterbox Defender user, but am considering the LK and MOKO cases you listed. I also am really interested in the Supcase Unicorn Beetle Pro. There is this I-Blason Prime Series as well. Also Seidio say they are working a case, but have not said what model.
Click to expand...
Click to collapse
I really like the Supcase but too bad it has a built in screen protector. Hate those things.

^^^
Just punch the built in one out and use a TGSP. That's what I do. Perfect.
http://www.amazon.com/gp/product/B016PD90L0
I got this one for now, emergency purchase. It is terrible. REALLY bad. The kickstand isn't bad, but only 2 corners are protected by hard material. Hard to get in and out, and worse, as far as I can see you can't push the volume buttons because it is flush with the hard plastic they made the holes in.
---------- Post added at 10:40 AM ---------- Previous post was at 10:39 AM ----------
BTW, the iBlason Prime looks much better, and a clip holster instead of a slide one too. Very nice. Just wish it came in other than black.
---------- Post added at 10:49 AM ---------- Previous post was at 10:40 AM ----------
And double wow, just saw the Moko one in the colors and the volume issue doesn't exist. And a snap in holster? Purchased. This should get me through for now. I'm returning this other one I linked.

Spring clip Seidio for iphone 6 plus works too

d1ez3 said:
Spring clip Seidio for iphone 6 plus works too
Click to expand...
Click to collapse
i saw your pics on reddit. what case and what holster combo? how is the fit? any wiggle or other issues? does the spring clip touch the glass at all? details man!

Aridon said:
I'm using a generic horizontal case. Please post how you like that vehicle one
Click to expand...
Click to collapse
Technically it rotates so it can be used vertically or horizontally. Though using it horizontally might be a bit annoying. Horizontal ones are my preference but since this is a big phone a vertical one would be less awkward and feel better for me. I got the case in today. I'll let you know when my phone comes.

after a couple of days with the moko case its...ok. it is 100% absolutely designed for left-handed people, which is annoying. also, it takes quite a concerted effort to both unclip and clip the phone into the case. most of it i'm sure is due to being right-handed, but it's also a function of the fact that the part you insert into the holster first has a pretty tight fit. also, the really soft rubber has quite a bit of give when inserting and removing which is also annoying. feels like they could have used some less compliant rubber here. idk it's ok for now i guess.
i've ordered various normal cases (spigen, ringle, diztronic) as well as the seidio iphone 6 plus holster (new version) to see how it works based on the reddit post. that guy never responded, but from his pics and from looking at the specs of the various items i *think* these cases would fit in the holster fine. my only concern is the part where the spring clip touches the phone. it's going to be very close as to whether it rests on part of the case or on the glass of the phone itself (which would be a no-go for me). we'll see...

indianajonze said:
after a couple of days with the moko case its...ok. it is 100% absolutely designed for left-handed people, which is annoying. also, it takes quite a concerted effort to both unclip and clip the phone into the case. most of it i'm sure is due to being right-handed, but it's also a function of the fact that the part you insert into the holster first has a pretty tight fit. also, the really soft rubber has quite a bit of give when inserting and removing which is also annoying. feels like they could have used some less compliant rubber here. idk it's ok for now i guess.
i've ordered various normal cases (spigen, ringle, diztronic) as well as the seidio iphone 6 plus holster (new version) to see how it works based on the reddit post. that guy never responded, but from his pics and from looking at the specs of the various items i *think* these cases would fit in the holster fine. my only concern is the part where the spring clip touches the phone. it's going to be very close as to whether it rests on part of the case or on the glass of the phone itself (which would be a no-go for me). we'll see...
Click to expand...
Click to collapse
Would you happen to have come across what the difference(s) are between the 2 generations of the iPh6+ Surface holsters?
I'm still waiting to hear back from them.
Contemplating getting the first gen holster to use with Ringke, then eventually the Crash Guard or Play Proof.
Sent from my Nexus 6P using Tapatalk

does anyone have the supcase holster combo yet? i'm wondering how soft the rubber is compared with the moko. the moko is way too soft imo. it keeps basically trying to slip off every time i remove the phone from the holster. supcase looks a lot sturdier
also, if anyone's interested, my seidio iphone 6 plus holster is arriving thursday, which corresponds to when both the diztronic and ringle cases are supposed to arrive. so we shall see about that...

indianajonze said:
does anyone have the supcase holster combo yet? i'm wondering how soft the rubber is compared with the moko. the moko is way too soft imo. it keeps basically trying to slip off every time i remove the phone from the holster. supcase looks a lot sturdier
also, if anyone's interested, my seidio iphone 6 plus holster is arriving thursday, which corresponds to when both the diztronic and ringle cases are supposed to arrive. so we shall see about that...
Click to expand...
Click to collapse
Ringke Fusion + iPh6+ Surface v1 holster = no go... at least not that well. The phone is too tall (flipped both ways). The latch is propped open about half way.
Going to test out my buddy's N6 Surface holster in a few days. Failing that, might have to just go with the full 6P Surface solution if they ever come out with it...

that's pretty shocking. isn't the ringle a pretty minimalist case? i don't have much experience with ringle but i would imagine it can't be much taller than the seidio surface case. the nexus 6p is nearly identical to the iphone 6s plus, there's like a 1mm difference in height. hard to imagine this would cause what you're describing. unless...maybe that's what the seidio revision from v1 to v2 was about? to allow for additional height for some reason?

indianajonze said:
that's pretty shocking. isn't the ringle a pretty minimalist case? i don't have much experience with ringle but i would imagine it can't be much taller than the seidio surface case. the nexus 6p is nearly identical to the iphone 6s plus, there's like a 1mm difference in height. hard to imagine this would cause what you're describing. unless...maybe that's what the seidio revision from v1 to v2 was about? to allow for additional height for some reason?
Click to expand...
Click to collapse
Upon closer inspection, there are 2 "feet" on the bottom/back side of the case, about 1mm thick. This is causing the phone to not hit flush bottom of the holster. About 3-4mm gap from bottom of phone to bottom of holster.
Even if it were to sit flush bottom, it's still 2-3mm too tall.
Width-wise it's a nice fit.
Sent from my Nexus 6P using Tapatalk

indianajonze said:
does anyone have the supcase holster combo yet? i'm wondering how soft the rubber is compared with the moko. the moko is way too soft imo. it keeps basically trying to slip off every time i remove the phone from the holster. supcase looks a lot sturdier
also, if anyone's interested, my seidio iphone 6 plus holster is arriving thursday, which corresponds to when both the diztronic and ringle cases are supposed to arrive. so we shall see about that...
Click to expand...
Click to collapse
Mine isn't here yet but I have that same case on my lg g3. That is hard stiff rubber and plastic parts. No give.

Hayaku said:
Ringke Fusion + iPh6+ Surface v1 holster = no go... at least not that well. The phone is too tall (flipped both ways). The latch is propped open about half way.
Going to test out my buddy's N6 Surface holster in a few days. Failing that, might have to just go with the full 6P Surface solution if they ever come out with it...
Click to expand...
Click to collapse
I have the Seidio N6 Surface holster. I used it with my N6 and the Supcase hybrid for the last year. I tried it with my 6P, and same thing that the 6P is too tall. the hinged latched it also propped open (N6P with the Ringke Fusion and the Supcase Hybrid)

Looking for stand alone holster suggestions.

There's a few times in the past where I have used different cases that I really liked with a holster since there was not a matching holster with the case.
Looks like I'm going to run in the same situation here and was wondering if anybody had a good line of holster vertical or horizontal that they would recommend.
I'd prefer something with a rotating belt clip on it.
Thank you.

Pouch with a belt clip? So like an old Blackberry one? I have a pouch from Begoos on Etsy and its great, but it doesn't have a belt clip.

Not sure exactly what you are looking for but here is one I bought..... I posted it in a thread:
http://forum.xda-developers.com/nexus-6p/accessories/dragonfly-universal-nylon-mobile-phone-t3289056

Search in Etsy. They have plenty of handmade pouches.

I should have said Holster I guess, but I figured folks would point me to case/holster combos. You know, like this...
http://www.amazon.com/TMAN-Leather-holster-Huawei-itself/dp/B0160LAOTO/
Sorry for the confusion, was a crazy night, let me update the OP.

Bump

This is the case/holster combo i use. Not the leather-y pouch like you linked, but i'm more of a fan of something more solid protecting the phone.
http://www.amazon.com/Seidio®-SURFA...id=1453249758&sr=1-3&keywords=seidio+nexus+6p

Thanks, I've sworn off of Seidio though. Cheap holsters that the clips break off of all the time, horrible customer service, and other issues I've had with them. I've found some excellent cases for the 6P, just need a holster to put it in. The TUDIA OMNIX is the one I'm trying to find a holster to fit right now.

Here's another one,: Encased Spring Holster.
Not sure on the quality, but I do highly recommend Seidio products though.

y2k1ltd said:
Here's another one,: Encased Spring Holster.
Not sure on the quality, but I do highly recommend Seidio products though.
Click to expand...
Click to collapse
That looks very interesting. I did buy the Seidio one similar to that one for my Nexus 6P though . I bought the one for the iPhone 6 Plus. The fit wasn't perfect but very close. I stopped using it after my phone popped out once. The clip also cracked the top of my IntelliArmor TGSP.

ReaperNY said:
That looks very interesting. I did buy the Seidio one similar to that one for my Nexus 6P though . I bought the one for the iPhone 6 Plus. The fit wasn't perfect but very close. I stopped using it after my phone popped out once. The clip also cracked the top of my IntelliArmor TGSP.
Click to expand...
Click to collapse
That's interesting. I've been using the Seidio surface holster made for the iCrap 6+ with the Nillkin Nature case without any issues or the device popping out. The clip is flat on top of the device and not at an angle suggesting the device is too tall for the holster.

y2k1ltd said:
Here's another one,: Encased Spring Holster.
Not sure on the quality, but I do highly recommend Seidio products though.
Click to expand...
Click to collapse
I'd never use Seidio products again. Terrible customer service/support, and the clips for the holsters break like candy.
I believe this Encased one is only for naked phones though.

RED ZMAN said:
I'd never use Seidio products again. Terrible customer service/support, and the clips for the holsters break like candy.
I believe this Encased one is only for naked phones though.
Click to expand...
Click to collapse
This is great! i was looking for one of these when i got my phone when it launched. Gave up on looking for one after a couple weeks though. Just placed an order for this one. Thanks!!!

I broke the holster to my case when it got caught on a chair and broke the left side support. The holster is the type where the phone slides in vertically bottom to top. I don't like the type where the phone snaps into the holster or leather pouches.
Does anyone know if you can buy the holster ONLY - NO CASE for the nexus 6p?
I need a holster cover with swivel clip. I don’t care if it is made by same manufacturer as my current generic soft lining and hard plastic shell case. I have searched ebay, amazon and other sites in google but could only find replacement holsters if I buy another case. I have four different cases already so I am sure I can find one to fit the holster.
I have checked out options in this thread but checking if there are other ideas.

y2k1ltd said:
That's interesting. I've been using the Seidio surface holster made for the iCrap 6+ with the Nillkin Nature case without any issues or the device popping out. The clip is flat on top of the device and not at an angle suggesting the device is too tall for the holster.
Click to expand...
Click to collapse
I have the same Nillkin case - is the Seidio holster you're using the one for an "uncased" iphone 6+ (http://www.amazon.com/Seidio-Spring-Clip-Holster-Non-Cased-iPhone/dp/B00OBWMSBW) or did it come with the iphone 6+ case? Thanks in advance

ddenson said:
I have the same Nillkin case - is the Seidio holster you're using the one for an "uncased" iphone 6+ (http://www.amazon.com/Seidio-Spring-Clip-Holster-Non-Cased-iPhone/dp/B00OBWMSBW) or did it come with the iphone 6+ case? Thanks in advance
Click to expand...
Click to collapse
Using the Seidio surface case holster.

Ditto on Seidio holsters breaking. I had theirs for my previous phone and wouldn't recommend it. Their design is flawed. I had an encased holster for my S6 and it worked really well. Design was probably one of the better.

Bump. I'm looking for something similar. Problem is that most of the pouches I find online are cheap and will eventually tear or break somehow.

Any Cases with holsters, or holsters alone yet?

Seeing if anyone seen or know of any holsters that work, or cases that come with holsters(like seidio, Otterbox defender, etc)?

I'm using the Seidio holster for the Note 7 and it fits the device with a thin hard case or tpu case. If the case is rigid border with tpu, it won't fit since it makes it too wide.

y2k1ltd said:
I'm using the Seidio holster for the Note 7 and it fits the device with a thin hard case or tpu case. If the case is rigid border with tpu, it won't fit since it makes it too wide.
Click to expand...
Click to collapse
OK cool I'll have to check that out. I appreciate that. What is a good case for it?

tomcat420m said:
OK cool I'll have to check that out. I appreciate that. What is a good case for it?
Click to expand...
Click to collapse
I have this one Ultra thin Mate 9 Case
and this one
Huawei-Mate-9-Case-Rock-Fit-Slim-Back-Shockproof-Drop-Protective-Case-Black

A fellow member used this belt clip and said it works great... iv ordered and will report back...
https://www.amazon.com/gp/product/B01B6QX66G/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Kind of sad how limited options this phone has in way of accessories. Thought after the 6P, would of brought more attention to Huawei. Appreciate the info on that one, but I've never been a fan of those slider holsters.

Here is my setup
https://forum.xda-developers.com/showpost.php?p=71177857&postcount=132