so i'm browsing the ebay for some good rigid and tough cases like case-mate and otterbox but the good ones are for the s 9000... the dimensions of the sl 9003 are123.7 x 64.2 x 10.6 mm and the s 9000s' 122.4 x 64.2 x 9.9 mm (only 1.3mm wider and 0.7 thicker). What do you think? will the cases of the galaxy 9000 will fit?
nickargas said:
so i'm browsing the ebay for some good rigid and tough cases like case-mate and otterbox but the good ones are for the s 9000... the dimensions of the sl 9003 are123.7 x 64.2 x 10.6 mm and the s 9000s' 122.4 x 64.2 x 9.9 mm (only 1.3mm wider and 0.7 thicker). What do you think? will the cases of the galaxy 9000 will fit?
Click to expand...
Click to collapse
no it doesnt fit...please read the forum before posting questions..it has been answered before also..
Nope. i9000 is a little bit smaller than i9003.
No because SL have 10.6 mm and S just 9.9 mm
Depends of case type. Rigid ones won't 100%, soft could fit.
I bought a cheap "i9000" soft protective shell and it fits perfectly
it won't fit well mate
leather pouch
hey guys im looking for the original samsung genuine pouch.. any ideas?
nickargas said:
so i'm browsing the ebay for some good rigid and tough cases like case-mate and otterbox but the good ones are for the s 9000... the dimensions of the sl 9003 are123.7 x 64.2 x 10.6 mm and the s 9000s' 122.4 x 64.2 x 9.9 mm (only 1.3mm wider and 0.7 thicker). What do you think? will the cases of the galaxy 9000 will fit?
Click to expand...
Click to collapse
nah it doesnt cz of the charging pt...for i9000 its at the bottom...and it feels quite uneasy for the fone to slide it easily...
thank you all for your time answering my question...i've tried putting a 9000 hard casemate housing which involved a soft and a hard case and the buttons wouldn't quite fit properly... you were right...
DaiTeM said:
Depends of case type. Rigid ones won't 100%, soft could fit.
I bought a cheap "i9000" soft protective shell and it fits perfectly
Click to expand...
Click to collapse
yeah it will fit but i think that the hole for the mic in the case does not match with the i9003
Related
Seidio plans to release Innocase (super slim rubberized case) for HTC Diamond late this week.
SCreen protector will be also available
Please post a picture
Good marketing here
Well, as said before, specifications (size) and pictures will be welcome...
Oh, and for the price ?
Wait and see.
What about the extended battery?? I am more interested in that.
seidioseidio said:
Seidio plans to release Innocase (super slim rubberized case) for HTC Diamond late this week.
SCreen protector will be also available
Click to expand...
Click to collapse
Hi,
Will this also fit the MDA Compact 4/Victor?
Thanks
salada2k said:
What about the extended battery?? I am more interested in that.
Click to expand...
Click to collapse
+1 here!!
________________________
victoradjei said:
Please post a picture
Click to expand...
Click to collapse
we will post the pictures tomorrow (Innocase- super slim rubberized case for Diamond)
spangelsaregreat said:
Hi,
Will this also fit the MDA Compact 4/Victor?
Thanks
Click to expand...
Click to collapse
MDA Compact 4 = HTC Diamond
Same thing. Different name.
Chippa said:
MDA Compact 4 = HTC Diamond
Same thing. Different name.
Click to expand...
Click to collapse
No it isn't. They have different cases and some Diamond Specific cases won't fit the Compact 4. Crystal cases being one in point.
Regards
no fotoz?!
seidioseidio said:
we will post the pictures tomorrow (Innocase- super slim rubberized case for Diamond)
Click to expand...
Click to collapse
Here is the link for Seidio's Innocase (super slim rubberized case) for Diamond. The pictures are included.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HDIAM-BK
Seidio
what's the interest????
seidioseidio said:
Here is the link for Seidio's Innocase (super slim rubberized case) for Diamond. The pictures are included.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HDIAM-BK
Seidio
Click to expand...
Click to collapse
Will it fit the Victor and MDA Compact 4?
Mr Seidioseidio,
Could you be so kind as to inform us as to when we might see your OEM-sized extended battery?
The wait is killing me.
Thank you.
seidioseidio said:
Here is the link for Seidio's Innocase (super slim rubberized case) for Diamond. The pictures are included.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HDIAM-BK
Seidio
Click to expand...
Click to collapse
The innocases (Super slim rubberized case) for HTC Diamond is "Now shipping"
Available in 4 colors
- Black
- Burgundy
- Blue
- Pink
http://www.seidioonline.com/SearchResults.asp?Cat=2474
The all come with rubberized textures.
Seidio
seidioseidio said:
The innocases (Super slim rubberized case) for HTC Diamond is "Now shipping"
Available in 4 colors
- Black
- Burgundy
- Blue
- Pink
http://www.seidioonline.com/SearchResults.asp?Cat=2474
The all come with rubberized textures.
Seidio
Click to expand...
Click to collapse
As above, will it fit the MDA Compact 4/Victor design?
Shippingrates
Nice case for Euro 29,95, but the shippingrates are high! Euro 24,57 to the Netherlands
Shippingrates
Stupid me! It is in dollars and not Euro's, sorry!
battery?
still no info on this item???
I would like to know too if the case will fit the MDA Compact4/Victor design?
And does anybody know if it is buyable in germany?
Hi All
Will the Mobi hard rubber plastic case (https://shop.htcpedia.com/htc-sensation-hard-snap-on-case.html) fit inside the HTC Horizontal Leather Pouch (https://shop.htcpedia.com/htc-messenger-side-case-with-belt-clip.html)
I have the red mobi case which I bought from another site and love the fit and finish of it. The case does not add a lot of bulk but trying it with the case, I would incline to say no because most of HTC cases are very form fitting. However, in one of the reviews, it said that the case mate case fits it. All I can say is to just try it out. Post pics if you do get them.
The HTC case is also not specifically made for the Sensation. It fits the Evo as well which I think is a bit bigger?
Evo
122 x 66 x 13 mm
Sensation
126.1 x 65.4 x 11.3 mm
According to that, the Sensation is longer but thinner and just as wide.
kpjimmy said:
Evo
122 x 66 x 13 mm
Sensation
126.1 x 65.4 x 11.3 mm
According to that, the Sensation is longer but thinner and just as wide.
Click to expand...
Click to collapse
Guess we'll hope for the best
I had a problem finding a case to fit my Sensation after installing the Case Mate Tough case. I finally found a pouch made by Nite Ize that fit.
Mobi hard case does not fit in OEM Horizontal Leather Holster
Most of the One X proponents tout a polycarbonate body as one of the plus-es of the HTC One X. Am I wrong in thinking that the Galaxy S3 also has a polycarbonate body (just that it has a shiny finish) ?
sparkymat said:
Most of the One X proponents tout a polycarbonate body as one of the plus-es of the HTC One X. Am I wrong in thinking that the Galaxy S3 also has a polycarbonate body (just that it has a shiny finish) ?
Click to expand...
Click to collapse
The S3 has a polycarbonate body.
Yep. Not that it means anything tho...my Lumia has a polycarbonate body but obviously it still gets scuffed and scratched like any plastic phone...ok, maybe a little less but it's negligible, the plastic of my GS2 held up the same way. The main advantage of polycarbonate is that if you happen to scratch the surface the layer underneath still has the same colour, so it doesn't bother you much. At the end of the day the polycarbonate thing is mere marketing bs IMHO.
Sent from my Lumia 800 using XDA Windows Phone 7 App
I'm looking for a good leather pull tab that works with a Nexus 4 with the official bumper on and I got a few cases up with dimensions close or similar to the bumper
HTC One - 137.4 x 68.2 x 9.3 mm
Xperia ZL - 131.6 x 69.8 x 9.8 mm
Nexus 4 Bumper - 133.9 x 68.7 x 9.1 mm
With that in mind the Htc one would be a bit tight width wise but by a very little amount, would it still pocket nicely? Xperia XL falls short height wise but would the difference revere much of the phone if in a leather pouch?
Has anyone tried a leather pouch or any pouch from these phones on their Nexus 4?
Considering ordering the zl one after seeing the phones shape hands on
Sent from my Nexus 4 using xda premium
I have always used the Spiegen case with holster for my Samsung phones. I am moving to the Mate 9 and they don't make it for that phone.
Anyone know of a similar product?
I'm using the Spiegen Rugged Armour Case with the Note 7 Spiegen Holster. I paid $5 for the Note 7 holster on ebay.
I use the UAG Urban Amor Gear case very nice https://de.urbanarmorgear.com/collections/type-plasma-series/products/huawei-mate-9
vagoldenboy said:
I'm using the Spiegen Rugged Armour Case with the Note 7 Spiegen Holster. I paid $5 for the Note 7 holster on ebay.
Click to expand...
Click to collapse
Cool. I didn't know the sioze was the same for the Holster. Sounds like a good way to go.
MikeFRG said:
I use the UAG Urban Amor Gear case very nice https://de.urbanarmorgear.com/collections/type-plasma-series/products/huawei-mate-9
Click to expand...
Click to collapse
I had looked at that during my search, but don't see that it has a belt clip option.
vagoldenboy said:
I'm using the Spiegen Rugged Armour Case with the Note 7 Spiegen Holster. I paid $5 for the Note 7 holster on ebay.
Click to expand...
Click to collapse
Did you have to do some type of mods? The dimensions of the Mate 9 are different from the Note 7:
Note 7 Dimensions: 153.5 x 73.9 x 7.9 mm (6.04 x 2.91 x 0.31 in)
Mate 9 Dimensions: 156.9 x 78.9 x 7.9 mm (6.18 x 3.11 x 0.31 in)
ewingr said:
Did you have to do some type of mods? The dimensions of the Mate 9 are different from the Note 7:
Note 7 Dimensions: 153.5 x 73.9 x 7.9 mm (6.04 x 2.91 x 0.31 in)
Mate 9 Dimensions: 156.9 x 78.9 x 7.9 mm (6.18 x 3.11 x 0.31 in)
Click to expand...
Click to collapse
I didn't make any mods.
Just to update....I have a Note 4 holster and I find that it works for the Mate 9, with a couple caveats: the phone is approximately 1/4" tall, so the top lever is raised a bit, but poses no problems; a TPU case (at least the one I have) gets pushed back when sliding under the lever.
I'm searching for a case that has a hard outer boundary that doesn't result in making the phone to tall.