Hello Guys.
I am atin from india.
I purchased Imported note 5 N920P (sprint) which is gsm and cdma
Now i am unable to use 4g data services on the phone.
when i insert My gsm card in the phone , i see following NETWORK MODES
1. CDMA
2. LTE / CDMA
3. GSM / UMTS
4. AUTOMATIC
I have selected automatic.
my phone gets network and i can make n receive calls.
but can not use my 4g data service.
however 3g service works , and i can see 3g written on top.
where as in my indian note 5 , when i use 3g , its written H+ . and when using 4g , its written 4g on top
But in imported n920p , 4g does not work and 3g works .but does not show h+ sign.. instead , shows 3g sign
Its running on android 6.0 , when i tried to update it , it says "Device has been modified in unauthorized way. try update via smart switch on pc or take to service center"
please help me on using data services on this phone in India and also can anyone guide on why its not getting update?
atin_garg said:
Hello Guys.
I am atin from india.
I purchased Imported note 5 N920P (sprint) which is gsm and cdma
Now i am unable to use 4g data services on the phone.
when i insert My gsm card in the phone , i see following NETWORK MODES
1. CDMA
2. LTE / CDMA
3. GSM / UMTS
4. AUTOMATIC
I have selected automatic.
my phone gets network and i can make n receive calls.
but can not use my 4g data service.
however 3g service works , and i can see 3g written on top.
where as in my indian note 5 , when i use 3g , its written H+ . and when using 4g , its written 4g on top
But in imported n920p , 4g does not work and 3g works .but does not show h+ sign.. instead , shows 3g sign
Its running on android 6.0 , when i tried to update it , it says "Device has been modified in unauthorized way. try update via smart switch on pc or take to service center"
please help me on using data services on this phone in India and also can anyone guide on why its not getting update?
Click to expand...
Click to collapse
You need to find out what lte bands your carrier uses. And make sure they are comptible with the sprint varients lte bands.
TheMadScientist420 said:
You need to find out what lte bands your carrier uses. And make sure they are comptible with the sprint varients lte bands.
Click to expand...
Click to collapse
If what I've read is correct, Sprint Note 5s have the same hardware and radio band capability as the international version. So a hack or something should be possible. But how or what is way beyond me.
sinisin said:
If what I've read is correct, Sprint Note 5s have the same hardware and radio band capability as the international version. So a hack or something should be possible. But how or what is way beyond me.
Click to expand...
Click to collapse
Next would be to make sure your apn is correct
thanks for replying guys.
unauthorized firmware was loaded. so now it gets FRP lock .
Now i want to flash its stock firmware via odin, so i can use it again./
- does flashing it to stock n920P firmware will unlock the device? or it will remian sim unlocked?
- where can i find stock firmware?
TIA
Related
i have LG G2 D801 but whenever i activate Mobile Data connection its still on Edge while 3G is available i can't use 3G what i can do pls help me its my request to all experts
thanks in advance
With the D801 you can select the network mode under Settings -> Tethering & networks -> Mobile networks -> Network mode. There should be 4 options:
GSM/WCDMA/LTE auto
GSM/WCDMA auto
WCDMA only
GSM only
If both GSM and WCDMA are avalable and you are in one of the auto modes and the phone uses GSM (maybe because the WCDMA signal is weak) you can select WCDMA only.
diamond12 said:
With the D801 you can select the network mode under Settings -> Tethering & networks -> Mobile networks -> Network mode. There should be 4 options:
GSM/WCDMA/LTE auto
GSM/WCDMA auto
WCDMA only
GSM only
If both GSM and WCDMA are avalable and you are in one of the auto modes and the phone uses GSM (maybe because the WCDMA signal is weak) you can select WCDMA only.
Click to expand...
Click to collapse
thanks Diamond for u r reply... i tried all option but still only Edge pls help me how can i activate 3G plssssss thanks in advance
Who is your carrier?
diamond12 said:
Who is your carrier?
Click to expand...
Click to collapse
thanks again for u r quick reply
my carrier is mobilink... im from pakistan
What frequencies does you carrier use for 3G? According to LG the D801 does 1, 2, 4 and 5, which according to Wikipedia are 2100, 1900, 1700 and 850MHz.
http://www.lg.com/us/cell-phones/lg-D801-g2/technical-specifications
http://en.wikipedia.org/wiki/UMTS_frequency_bands
Another possibility is that your SIM card is only provisioned for 2G. I had that happen to me in the opposite way with H2O which only allowed access to the WCDMA network but not the GSM (before they added LTE). You may want to contact Mobilink and request a different SIM card.
can any one help me please.... any expert please help me
i insert my SIM card in my Galaxy Note in my Galaxy Note 3G working fine... but when i insert that SIM card in my LG G2 D801 3G not working please help me bro please
i will buy you a beer
It might be like ATT here in the states where you must notify the provider of the phone IMEI if you want 4g before they can provision it.
Looks like Mobilnk is uses 2100, so it should work.
vkky_ said:
can any one help me please.... any expert please help me
i insert my SIM card in my Galaxy Note in my Galaxy Note 3G working fine... but when i insert that SIM card in my LG G2 D801 3G not working please help me bro please
i will buy you a beer
Click to expand...
Click to collapse
Use 3845#*801#
Check in wcdma settings
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Same issue here with lg g2 d801 on same carrier Mobilink Pakistan. Stuck on edge no signals in wcdma mode. Please help me.
0sman92 said:
Same issue here with lg g2 d801 on same carrier Mobilink Pakistan. Stuck on edge no signals in wcdma mode. Please help me.
Click to expand...
Click to collapse
Read the instructions above. Select bands to automatic or all
HELP!!
Guys I need Help I have G2 D801 using Zong in Pakistan my sim is 4G capable and provisioned and they transmit on 2100hz so that's not a problem as well but still no signals in wcdma only mode I can't get anything above 2G so please find a solution for this I even installed Cm12 for it but still no use
Eagle.x2 said:
Guys I need Help I have G2 D801 using Zong in Pakistan my sim is 4G capable and provisioned and they transmit on 2100hz so that's not a problem as well but still no signals in wcdma only mode I can't get anything above 2G so please find a solution for this I even installed Cm12 for it but still no use
Click to expand...
Click to collapse
4G/LTE Pakistani Band 3 1800 isnt present in D801.
So you can get 3G HSPA+ only on 2100MHz...
Check APN settings
Resolved for me
My LG G2 had same problem. Changing DNS or modifying APN not resolve it.
I found reason of problem. After several ROM update, my LG G2 IMEI may be damaged. If you see in Cellular Network → Network Operator, these’s only one record for each operator.
I did backup my imei 2 years ago, now I restore it using LG backup IMEI app. After restore my IMEI, i see two same row operator’name in Network Operator. I can connect 3G again after several months without 3G.
If you did not backup IMEI, you can folowing instructions in forums to restore IMEI. Please googling !
Hi guys recently reliance jio in india launched new 4g service with 4 GB daily free usage for 4 months and unlimited calls for free. they only provide service to 4g lte phones.I know that I will get only 3g speed but that's not a problem. Is there any tricks to use 4g sim on 3g phone. I tried dialing *#*#4636#*#* and selected lte but the menu comes back to wcdma . is it possible to do system changes to trick the phone that it's network is 4g.I use cm 12.1 rooted. If any one can help it will be awesome.
bhavinlanse said:
Hi guys recently reliance jio in india launched new 4g service with 4 GB daily free usage for 4 months and unlimited calls for free. they only provide service to 4g lte phones.I know that I will get only 3g speed but that's not a problem. Is there any tricks to use 4g sim on 3g phone. I tried dialing *#*#4636#*#* and selected lte but the menu comes back to wcdma . is it possible to do system changes to trick the phone that it's network is 4g.I use cm 12.1 rooted. If any one can help it will be awesome.
Click to expand...
Click to collapse
In no way you can change the frequencies if phone's modem doesn't allow you. It's not just faking the icon on status bar.
Sent from my SM-G935F using Tapatalk
bhavinlanse said:
Hi guys recently reliance jio in india launched new 4g service with 4 GB daily free usage for 4 months and unlimited calls for free. they only provide service to 4g lte phones.I know that I will get only 3g speed but that's not a problem. Is there any tricks to use 4g sim on 3g phone. I tried dialing *#*#4636#*#* and selected lte but the menu comes back to wcdma . is it possible to do system changes to trick the phone that it's network is 4g.I use cm 12.1 rooted. If any one can help it will be awesome.
Click to expand...
Click to collapse
hi ....i guess the solution is here
https://forum.xda-developers.com/cr...ad-progress-please-leave-im-updating-t2871269
mrn219 said:
hi ....i guess the solution is here
https://forum.xda-developers.com/cr...ad-progress-please-leave-im-updating-t2871269
Click to expand...
Click to collapse
nice! but works only on qualcomm devices
Sent from my SM-G930F using Tapatalk
mrn219 said:
hi ....i guess the solution is here
https://forum.xda-developers.com/cr...ad-progress-please-leave-im-updating-t2871269
Click to expand...
Click to collapse
It just just unlocks available bands
If your modem does not have LTE band then its useless
It unlocks all bands which the modem supports nothing more
Wuby986 said:
nice! but works only on qualcomm devices
Click to expand...
Click to collapse
right...
The Hard Gamer said:
It just just unlocks available bands
If your modem does not have LTE band then its useless
It unlocks all bands which the modem supports nothing more
Click to expand...
Click to collapse
Idk... maybe the hardware supports it but needs some software changes ... like driver ...
My device (lenovo a3000h) apparently doesn't support 4g but there is "LTE" option in network type in "tablet information "...
I don't think that you can do that.
If the network only uses LTE bands, there's no way you can get '3G speeds' or use your SIM card in a phone that doesn't support LTE.
Sent from my SM-G935F
I tried to find what's the difference between 3g and 4g devices but couldn't find what i wanted ...
maybe both have the same hardware but 4g needs different software and stronger processor ...and they locked it in weak phones to prevent crashes...
how can i unlock my Sprint AQT80 to work on any LTE/CDMA newtork?
plz help and thanks in advanced
Hello,
I have Samsung GS3 verizon SCH-I535 With CM13 installed , works perfectly , APN well configured and i connect with 3g, but i still have a problem.
Yesterday i upgraded to 4G , when i plugged the new 4g sim card and rebooted, i had no Network at all, i couldnt even make calls, so i go to settings ==> Network ====> and selected GSM/WCDMA and the network and 3g worked , if i chose LTE or other options it will switch the network off and wont work.
Please help me guys , what should i do ??!
RashidVet said:
Hello,
I have Samsung GS3 verizon SCH-I535 With CM13 installed , works perfectly , APN well configured and i connect with 3g, but i still have a problem.
Yesterday i upgraded to 4G , when i plugged the new 4g sim card and rebooted, i had no Network at all, i couldnt even make calls, so i go to settings ==> Network ====> and selected GSM/WCDMA and the network and 3g worked , if i chose LTE or other options it will switch the network off and wont work.
Please help me guys , what should i do ??!
Click to expand...
Click to collapse
The 4G signal that the networks worldwide use are not the same, GSM 4G is not the same as CDMA 4G, also, some 4G devices in the past were not true 4G, they used Wimax which is not actual 4G. My point is, the 4G your network uses is probably a different signal type or its bands do not match the bands the device supports. Research the exact signal type and frequency bands that Verizon supports, then research what signal type and bands that your network supports.
Many times I've seen 4G CDMA devices used on other networks and 4G could never be made to work, they were stuck with 3G because the device did not support the 4G type their network uses.
Most devices on other networks but still have 4G can count themselves lucky.
Thanks for your reply,
I flashed this rom (CM13) ; http://forum.xda-developers.com/gal...m-cyanogenmod-13-0-nightlies-verizon-t3269675
my provider is "Djezzy" , and i think its 4g LTE.
RashidVet said:
Thanks for your reply,
I flashed this rom (CM13) ; http://forum.xda-developers.com/gal...m-cyanogenmod-13-0-nightlies-verizon-t3269675
my provider is "Djezzy" , and i think its 4g LTE.
Click to expand...
Click to collapse
You "think", no, don't assume anything, even if your provider uses 4G LTE, if the bands/frequencies of your network are not supported by the device's hardware then it isn't going to work. As I said the first time, you need to do the research to see what bands and frequencies Verizon uses and then do the research to see what bands/frequencies your service provider uses. I mean find the actual values of Verizon's bands/frequencies and the actual values of your networks bands/frequencies, you need to compare them to see if the use the same bands/frequencies, not just whether its 4G or LTE or not. Do you understand what I'm saying?
Also, their may be radio/modem incompatibilities, the radio modem is part of the stock firmware that remains on the device, ROMs are just the system partition and not the whole operating system, software that is under the ROM is still the software the device came with or had before you flashed a custom ROM.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Hello,
I have a Samsung Galaxy J2 SM-J200F LTE, I usually just get 3G or H+ and I want to get an option to force LTE only.
I did the *#0011# it shows me the service menu :
1- I click the "Plus" button on top-right.
2- I click "Back".
3- Then input "Q".
4- Then "Back" again.
5- Finally input "0000".
I waited for 5 minutes, nothing happened. I repeated the process many times, but still I can't get to the options to choose "LTE only".
PS : I tried *#2263# too, but it shows nothing at all.
I even tried the app "4G LTE SWITCH" . But it says that my device is not compatible.
Please guys, help me.
Is it compatible with the carriers lte? Just because it says it has lte doesn't mean it will work on every carriers lte.
Also if all you are getting is 3g or lte then you may not be in lte coverage.
zelendel said:
Is it compatible with the carriers lte? Just because it says it has lte doesn't mean it will work on every carriers lte.
Also if all you are getting is 3g or lte then you may not be in lte coverage.
Click to expand...
Click to collapse
Yes, it is compatible with the carriers LTE bands, and there is a strong LTE coverage because I tested it in another phone having the same carrier too.
I just need a way to lock LTE only please
hunterwolves said:
Yes, it is compatible with the carriers LTE bands, and there is a strong LTE coverage because I tested it in another phone having the same carrier too.
I just need a way to lock LTE only please
Click to expand...
Click to collapse
You dont want that. As LTE is a data signal only. If it was only LTE you would never get a phone call or text.
If it is not connection the LTE then my next guess would be that the antenna is not strong enough.
Remember not all devices are equal. Just because one works doesnt mean others will.
zelendel said:
You dont want that. As LTE is a data signal only. If it was only LTE you would never get a phone call or text.
If it is not connection the LTE then my next guess would be that the antenna is not strong enough.
Remember not all devices are equal. Just because one works doesnt mean others will.
Click to expand...
Click to collapse
In fact I don't want to use the phone for calls, I just need to activate LTE only please.
hunterwolves said:
In fact I don't want to use the phone for calls, I just need to activate LTE only please.
Click to expand...
Click to collapse
Then you will have to build your own rom. Which still might not happen as the part that controls that is not open source. So it will take alot of work. And with that device you will most likely not be able to do anything about it as it is not modable and there is no device that even has the option for you to compare the code.
This is just something you may not be able to do
He wanted to enable LTE only mode. . .so there's a way you need to modify CSC features. .I tried this a year ago. . it's still working
Buy xiome Redmi 2 and above phones u can force lte stand by mode also higher version like Redmi 4 has dual sim supporting dual lte stand by mode.
Xiomi offers awesome features at lower costs...
Lte only mode on samsung devices(Tutorial )
Here is the link to the video tutorial. ..??
https://youtu.be/ojWF6lA1QGY
Hello,
I'Ve Samsung galaxy j3 prime sm-j327t1 matropcs and its shows onlu 2g / E when switching to mobile data. I've 4G enabled SIM. when I did *#0011# it show following attached img. Ive checked the band with *#2263# band set to automatic and hpsa-rel9 sounds like ok but why the hell phone still is on 2g network when enabling data.
Regards
Net_Spy said:
Hello,
I'Ve Samsung galaxy j3 prime sm-j327t1 matropcs and its shows onlu 2g / E when switching to mobile data. I've 4G enabled SIM. when I did *#0011# it show following attached img. Ive checked the band with *#2263# band set to automatic and hpsa-rel9 sounds like ok but why the hell phone still is on 2g network when enabling data.
Regards
Click to expand...
Click to collapse
verify that you are in a location that gets a good signal and that it says you get 4g lte data. then goto connection settings>mobile networks and tap on network mode and choose the option in the screenshot. if it doesnt change do a factory reset. if that fails either get the stock rom from sammobile and flash it with odin or call samsung for a replacement. also verify that theres no upgrades or problems in your area by calling customer care and that your house doesnt limit your signal. my house sometimes limits mine due to it being metal all around. in that case putting your phone in a window fixes it. if you want to avoid that contact tmobile to get a signal booster for your house. update: in the *#2263# menu make sure to choose reset on both LTE and WCDMA in disable band.
thepcwiz101 said:
verify that you are in a location that gets a good signal and that it says you get 4g lte data. then goto connection settings>mobile networks and tap on network mode and choose the option in the screenshot. if it doesnt change do a factory reset. if that fails either get the stock rom from sammobile and flash it with odin or call samsung for a replacement. also verify that theres no upgrades or problems in your area by calling customer care and that your house doesnt limit your signal. my house sometimes limits mine due to it being metal all around. in that case putting your phone in a window fixes it. if you want to avoid that contact tmobile to get a signal booster for your house. update: in the *#2263# menu make sure to choose reset on both LTE and WCDMA in disable band.
Click to expand...
Click to collapse
Well ive tried every thing even re-flashed my device but still same.
Regards
Net_Spy
Net_Spy said:
Well ive tried every thing even re-flashed my device but still same.
Regards
Net_Spy
Click to expand...
Click to collapse
Well you may need to contact samsung for a replacement.
Net_Spy said:
Hello,
I'Ve Samsung galaxy j3 prime sm-j327t1 matropcs and its shows onlu 2g / E when switching to mobile data. I've 4G enabled SIM. when I did *#0011# it show following attached img. Ive checked the band with *#2263# band set to automatic and hpsa-rel9 sounds like ok but why the hell phone still is on 2g network when enabling data.
Regards
Click to expand...
Click to collapse
It looks like we have the same problem,
After I root, unlock the phone.
Insert sim card
It will only show 2G networks.
I'm confused right now.lol
Which country are you in?
Asia? china?
GSM CHEN said:
It looks like we have the same problem,
After I root, unlock the phone.
Insert sim card
It will only show 2G networks.
I'm confused right now.lol
Which country are you in?
Asia? china?
Click to expand...
Click to collapse
Im from asia
Net_Spy said:
Im from asia
Click to expand...
Click to collapse
This phone doesn't have certain bands asia uses. you may need to buy the sm-j327u (samsungs unlocked version of this phone that can work on cdma and gsm carriers.) the sm-j327t1 was designed for the united states.
to fix this problem install (Force Lte Only).apk from play store go to phone information>Network mode>Select WCDMA ONLY!
it will fix the problem as well as you'll have all option enable i the network mode!
Net_Spy said:
Well ive tried every thing even re-flashed my device but still same.
Regards
Net_Spy
Click to expand...
Click to collapse
to fix this problem install (Force Lte Only).apk from play store go to phone information>Network mode>Select WCDMA ONLY! or *#2263# (band selection) wcdma only!
it will fix the problem as well as you'll have all option enable i the network mode!
Need some help here, still stuck on 2G. Though I don't have a T-mobile sim card, the device is said to be unlocked (by @ashyx ), so I want to use my sim card. So what am I supposed to do (I've tried everything listed here so far, no luck)?
MiiJack said:
Need some help here, still stuck on 2G. Though I don't have a T-mobile sim card, the device is said to be unlocked (by @ashyx ), so I want to use my sim card. So what am I supposed to do (I've tried everything listed here so far, no luck)?
Click to expand...
Click to collapse
Which network?
ashyx said:
Which network?
Click to expand...
Click to collapse
Orange, like in the other thread. APN set to default also, just in case.
MiiJack said:
Orange, like in the other thread. APN set to default also, just in case.
Click to expand...
Click to collapse
Have you checked which bands your network supports against the bands your device supports?
You may have to open the network settings and modify the bands if possible.
Also which firmware are you running, you may need to flash the modem from the orange firmware?
Samsung galaxy model J327u build number NRD90M.J327UUEU3ARB1
Hello,
I'Ve Samsung galaxy j3 sm-j327U and its shows onlu 2g / E when switching to mobile data and not working under LTE. I've 4G enabled SIM. when I did *#0011# it show following attached img. Ive tried to check the band with *#2263# & *#*#4636#*#* but not working this code , why the hell phone still is on 2g network when enabling data.
Regards
Smj327u
---------- Post added at 08:38 AM ---------- Previous post was at 08:29 AM ----------
Samsung galaxy model J327u build number NRD90M.J327UUEU3ARB1
Hello,
I'Ve Samsung galaxy j3 sm-j327U and its shows onlu 2g / E when switching to mobile data and not working under LTE. I've 4G enabled SIM. when I did *#0011# it show following attached img. Ive tried to check the band with *#2263# & *#*#4636#*#* but not working this code , why the hell phone still is on 2g network when enabling data.
Regards
Smj327u
Samsunngj327u said:
Hello,
I'Ve Samsung galaxy j3 sm-j327U and its shows onlu 2g / E when switching to mobile data and not working under LTE. I've 4G enabled SIM. when I did *#0011# it show following attached img. Ive tried to check the band with *#2263# & *#*#4636#*#* but not working this code , why the hell phone still is on 2g network when enabling data.
Regards
Smj327u
---------- Post added at 08:38 AM ---------- Previous post was at 08:29 AM ----------
Samsung galaxy model J327u build number NRD90M.J327UUEU3ARB1
Hello,
I'Ve Samsung galaxy j3 sm-j327U and its shows onlu 2g / E when switching to mobile data and not working under LTE. I've 4G enabled SIM. when I did *#0011# it show following attached img. Ive tried to check the band with *#2263# & *#*#4636#*#* but not working this code , why the hell phone still is on 2g network when enabling data.
Regards
Smj327u
Click to expand...
Click to collapse
It probably might be the country your in but i don't know.
Suffering with the same issue
??????? it's been almost 2 years that I'm suffering with the same problem I bought this mobile in June 2017 in LA then I came back to my country in Africa I'm suffering I've never get 3g here but in USA even LTE was running. It's a piss of loss this mobile. We have to ask Samsung to recall it.
How to fix 2G only in j3 prime and any samsung phone 100% working without flash
go youtub and search GSM SOFTWARE POINT
your problem solution in my youtub chanal
goodluck
GSM SOFTWARE POINT
Gsm software point
I dont find this channel on YouTube
I check this solution and it was worked:
*#2263# --> select no 1 band selection --> Select no 4 LTE --> Select no 0 LTE_ALL
reza_gk said:
I check this solution and it was worked:
*#2263# --> select no 1 band selection --> Select no 4 LTE --> Select no 0 LTE_ALL
Click to expand...
Click to collapse
:laugh::laugh::laugh::laugh: it worked 100% thanks Reza_gk you are genius