Hello,
I'Ve Samsung galaxy j3 prime sm-j327t1 matropcs and its shows onlu 2g / E when switching to mobile data. I've 4G enabled SIM. when I did *#0011# it show following attached img. Ive checked the band with *#2263# band set to automatic and hpsa-rel9 sounds like ok but why the hell phone still is on 2g network when enabling data.
Regards
Net_Spy said:
Hello,
I'Ve Samsung galaxy j3 prime sm-j327t1 matropcs and its shows onlu 2g / E when switching to mobile data. I've 4G enabled SIM. when I did *#0011# it show following attached img. Ive checked the band with *#2263# band set to automatic and hpsa-rel9 sounds like ok but why the hell phone still is on 2g network when enabling data.
Regards
Click to expand...
Click to collapse
verify that you are in a location that gets a good signal and that it says you get 4g lte data. then goto connection settings>mobile networks and tap on network mode and choose the option in the screenshot. if it doesnt change do a factory reset. if that fails either get the stock rom from sammobile and flash it with odin or call samsung for a replacement. also verify that theres no upgrades or problems in your area by calling customer care and that your house doesnt limit your signal. my house sometimes limits mine due to it being metal all around. in that case putting your phone in a window fixes it. if you want to avoid that contact tmobile to get a signal booster for your house. update: in the *#2263# menu make sure to choose reset on both LTE and WCDMA in disable band.
thepcwiz101 said:
verify that you are in a location that gets a good signal and that it says you get 4g lte data. then goto connection settings>mobile networks and tap on network mode and choose the option in the screenshot. if it doesnt change do a factory reset. if that fails either get the stock rom from sammobile and flash it with odin or call samsung for a replacement. also verify that theres no upgrades or problems in your area by calling customer care and that your house doesnt limit your signal. my house sometimes limits mine due to it being metal all around. in that case putting your phone in a window fixes it. if you want to avoid that contact tmobile to get a signal booster for your house. update: in the *#2263# menu make sure to choose reset on both LTE and WCDMA in disable band.
Click to expand...
Click to collapse
Well ive tried every thing even re-flashed my device but still same.
Regards
Net_Spy
Net_Spy said:
Well ive tried every thing even re-flashed my device but still same.
Regards
Net_Spy
Click to expand...
Click to collapse
Well you may need to contact samsung for a replacement.
Net_Spy said:
Hello,
I'Ve Samsung galaxy j3 prime sm-j327t1 matropcs and its shows onlu 2g / E when switching to mobile data. I've 4G enabled SIM. when I did *#0011# it show following attached img. Ive checked the band with *#2263# band set to automatic and hpsa-rel9 sounds like ok but why the hell phone still is on 2g network when enabling data.
Regards
Click to expand...
Click to collapse
It looks like we have the same problem,
After I root, unlock the phone.
Insert sim card
It will only show 2G networks.
I'm confused right now.lol
Which country are you in?
Asia? china?
GSM CHEN said:
It looks like we have the same problem,
After I root, unlock the phone.
Insert sim card
It will only show 2G networks.
I'm confused right now.lol
Which country are you in?
Asia? china?
Click to expand...
Click to collapse
Im from asia
Net_Spy said:
Im from asia
Click to expand...
Click to collapse
This phone doesn't have certain bands asia uses. you may need to buy the sm-j327u (samsungs unlocked version of this phone that can work on cdma and gsm carriers.) the sm-j327t1 was designed for the united states.
to fix this problem install (Force Lte Only).apk from play store go to phone information>Network mode>Select WCDMA ONLY!
it will fix the problem as well as you'll have all option enable i the network mode!
Net_Spy said:
Well ive tried every thing even re-flashed my device but still same.
Regards
Net_Spy
Click to expand...
Click to collapse
to fix this problem install (Force Lte Only).apk from play store go to phone information>Network mode>Select WCDMA ONLY! or *#2263# (band selection) wcdma only!
it will fix the problem as well as you'll have all option enable i the network mode!
Need some help here, still stuck on 2G. Though I don't have a T-mobile sim card, the device is said to be unlocked (by @ashyx ), so I want to use my sim card. So what am I supposed to do (I've tried everything listed here so far, no luck)?
MiiJack said:
Need some help here, still stuck on 2G. Though I don't have a T-mobile sim card, the device is said to be unlocked (by @ashyx ), so I want to use my sim card. So what am I supposed to do (I've tried everything listed here so far, no luck)?
Click to expand...
Click to collapse
Which network?
ashyx said:
Which network?
Click to expand...
Click to collapse
Orange, like in the other thread. APN set to default also, just in case.
MiiJack said:
Orange, like in the other thread. APN set to default also, just in case.
Click to expand...
Click to collapse
Have you checked which bands your network supports against the bands your device supports?
You may have to open the network settings and modify the bands if possible.
Also which firmware are you running, you may need to flash the modem from the orange firmware?
Samsung galaxy model J327u build number NRD90M.J327UUEU3ARB1
Hello,
I'Ve Samsung galaxy j3 sm-j327U and its shows onlu 2g / E when switching to mobile data and not working under LTE. I've 4G enabled SIM. when I did *#0011# it show following attached img. Ive tried to check the band with *#2263# & *#*#4636#*#* but not working this code , why the hell phone still is on 2g network when enabling data.
Regards
Smj327u
---------- Post added at 08:38 AM ---------- Previous post was at 08:29 AM ----------
Samsung galaxy model J327u build number NRD90M.J327UUEU3ARB1
Hello,
I'Ve Samsung galaxy j3 sm-j327U and its shows onlu 2g / E when switching to mobile data and not working under LTE. I've 4G enabled SIM. when I did *#0011# it show following attached img. Ive tried to check the band with *#2263# & *#*#4636#*#* but not working this code , why the hell phone still is on 2g network when enabling data.
Regards
Smj327u
Samsunngj327u said:
Hello,
I'Ve Samsung galaxy j3 sm-j327U and its shows onlu 2g / E when switching to mobile data and not working under LTE. I've 4G enabled SIM. when I did *#0011# it show following attached img. Ive tried to check the band with *#2263# & *#*#4636#*#* but not working this code , why the hell phone still is on 2g network when enabling data.
Regards
Smj327u
---------- Post added at 08:38 AM ---------- Previous post was at 08:29 AM ----------
Samsung galaxy model J327u build number NRD90M.J327UUEU3ARB1
Hello,
I'Ve Samsung galaxy j3 sm-j327U and its shows onlu 2g / E when switching to mobile data and not working under LTE. I've 4G enabled SIM. when I did *#0011# it show following attached img. Ive tried to check the band with *#2263# & *#*#4636#*#* but not working this code , why the hell phone still is on 2g network when enabling data.
Regards
Smj327u
Click to expand...
Click to collapse
It probably might be the country your in but i don't know.
Suffering with the same issue
??????? it's been almost 2 years that I'm suffering with the same problem I bought this mobile in June 2017 in LA then I came back to my country in Africa I'm suffering I've never get 3g here but in USA even LTE was running. It's a piss of loss this mobile. We have to ask Samsung to recall it.
How to fix 2G only in j3 prime and any samsung phone 100% working without flash
go youtub and search GSM SOFTWARE POINT
your problem solution in my youtub chanal
goodluck
GSM SOFTWARE POINT
Gsm software point
I dont find this channel on YouTube
I check this solution and it was worked:
*#2263# --> select no 1 band selection --> Select no 4 LTE --> Select no 0 LTE_ALL
reza_gk said:
I check this solution and it was worked:
*#2263# --> select no 1 band selection --> Select no 4 LTE --> Select no 0 LTE_ALL
Click to expand...
Click to collapse
:laugh::laugh::laugh::laugh: it worked 100% thanks Reza_gk you are genius
Related
Hi all,
i have an unlocked at&t one x. i'm using it in india on vodafone network. i wanted to know if 3g will work on this phone? i see the E symbol on the notification bar. does that mean that it will work only on edge? the frequency bands seem to be compatible. is there anyone who is already using it on the same network and can help me out with this? thanks.
fixated said:
Hi all,
i have an unlocked at&t one x. i'm using it in india on vodafone network. i wanted to know if 3g will work on this phone? i see the E symbol on the notification bar. does that mean that it will work only on edge? the frequency bands seem to be compatible. is there anyone who is already using it on the same network and can help me out with this? thanks.
Click to expand...
Click to collapse
Did 3G ever worked for you ? How did you unlock you AT&T one x, sung unlock code ?
If you go to your dialer and type in *#*#4636#*#* , you will go into testing mode - where you can check your network settings. Verify that your network is not set to something like "LTE Only" (which is not available in India).
Preferably set it to "WCDMA Preferred" or "WCDMA Only" (You can also play around with HSPA ).
See if that works.
Wrong section
Sent from my HTC One XL using Tapatalk 2
this should be in Q&A section.
Are you having any 3G plan from vodafone? - If you are on 3g plan you should get 3g automatically.
-Try changing network modes if you have a 3g plan but still get edge only
Having the same problem..
I have an AT&T Unlocked HTC ONE XL (Eviita)
Its Bands seem to be compatible with 3G Bands in India.
I have tried everything (*#*#4636#*#*) and tried all banks.. on "WCDMA PREFERRED" it still shows "E" and my sim comes 3G data plan is active.
I have Unlocked Bootloader, S-Off, Rooted, Installed Cynganemod 10.2 (Android 4.3) with G-apps and its all working fine, but still no 3G.
Any help on this from anyone.
Theres only 1 thing i can now think of... when u go into (*#*#4636#*#*) mode and click on Phone Information and scroll down, u can see one tab which cannot be clicked and it dimmed out, it says... "OEM-specific Info/Settings", but you cant click it.
Is this a Data Locked phone?
hypermaster said:
Having the same problem..
I have an AT&T Unlocked HTC ONE XL (Eviita)
Its Bands seem to be compatible with 3G Bands in India.
I have tried everything (*#*#4636#*#*) and tried all banks.. on "WCDMA PREFERRED" it still shows "E" and my sim comes 3G data plan is active.
Click to expand...
Click to collapse
When buying any phone from a source other than your carrier, you need to do the research on band compatibility BEFORE you buy the phone. As this is set in hardware, and is can't be modified. The fact you say "seems to be compatible" implies that you aren't sure.
Also, you haven't mentioned what carrier you are using. The OP says Vodaphone, and I can't find any info on what MHz band Vodaphone uses for 3G. You need to know what band your carrier is using for 3G. Your carrier needs to be using one of the bands 850, 1900, or 2100 MHz for 3G (HSPA). Otherwise you will not get 3G on this device.
hypermaster said:
Is this a Data Locked phone?
Click to expand...
Click to collapse
That doesn't mean anything, did you make that up? Either the phone is SIM unlocked or not. There is no "lock" on the device that would make you get EDGE but not 3G. Getting EDGE but no 3G typically means that the device is not compatible with your carrier's 3G network.
---------- Post added at 09:37 AM ---------- Previous post was at 09:35 AM ----------
CheesyNutz said:
Wrong section
Click to expand...
Click to collapse
I've reported the thread to mods for moving.
Thread moved to Q&A forum.
is your phone on 'gsm only' mode ? I've used the same phone in India but it wasn't a AT&T one though.
hello,
i hope i put this in the correct forum area.
i have t-mobile as a carrier. i bought two new samsung galaxy ace phones. ace plus and an ace 2. both are the latin models, not the euro models, and have the 850/1900 3g freq, but when i use my tmobile sim, both phones are running on EDGE speed and not 3g. anybody know why and how to get them to run on the 3g, tmobile was a waste of time asking them, no help
thanks
U should enable it in settings>mobile networks. U can either put it on 3G, 2G, OR automatic (for the network to chose which is best)
Lifehacker7 said:
U should enable it in settings>mobile networks. U can either put it on 3G, 2G, OR automatic (for the network to chose which is best)
Click to expand...
Click to collapse
you would think so, but in that area the only options are
network mode....
gsm/wcdma ( auto mode) which is selected
gsm only
wcdma only
and "network operator" , which i search, tmobile comes up and is selected
still on edge speed, i do not see anywhere to select 2g or 3g
any ideas???
mudd68 said:
you would think so, but in that area the only options are
network mode....
gsm/wcdma ( auto mode) which is selected
gsm only
wcdma only
and "network operator" , which i search, tmobile comes up and is selected
still on edge speed, i do not see anywhere to select 2g or 3g
any ideas???
Click to expand...
Click to collapse
Ya. That's it. GSM is 2g and wcdma is 3g. That's wat Samsung decided to call them as.! What have u selected among them?
Lifehacker7 said:
Ya. That's it. GSM is 2g and wcdma is 3g. That's wat Samsung decided to call them as.! What have u selected among them?
Click to expand...
Click to collapse
ok, selected wcdma, no signal now, man this sucks!!!
any ideas?
mudd68 said:
ok, selected wcdma, no signal now, man this sucks!!!
any ideas?
Click to expand...
Click to collapse
Seems like u don't have 3g network there!
Lifehacker7 said:
Seems like u don't have 3g network there!
Click to expand...
Click to collapse
hum, tmobile says is up and running, ill try my friends att sim and see if it works
thanks
Hello Guys.
I am atin from india.
I purchased Imported note 5 N920P (sprint) which is gsm and cdma
Now i am unable to use 4g data services on the phone.
when i insert My gsm card in the phone , i see following NETWORK MODES
1. CDMA
2. LTE / CDMA
3. GSM / UMTS
4. AUTOMATIC
I have selected automatic.
my phone gets network and i can make n receive calls.
but can not use my 4g data service.
however 3g service works , and i can see 3g written on top.
where as in my indian note 5 , when i use 3g , its written H+ . and when using 4g , its written 4g on top
But in imported n920p , 4g does not work and 3g works .but does not show h+ sign.. instead , shows 3g sign
Its running on android 6.0 , when i tried to update it , it says "Device has been modified in unauthorized way. try update via smart switch on pc or take to service center"
please help me on using data services on this phone in India and also can anyone guide on why its not getting update?
atin_garg said:
Hello Guys.
I am atin from india.
I purchased Imported note 5 N920P (sprint) which is gsm and cdma
Now i am unable to use 4g data services on the phone.
when i insert My gsm card in the phone , i see following NETWORK MODES
1. CDMA
2. LTE / CDMA
3. GSM / UMTS
4. AUTOMATIC
I have selected automatic.
my phone gets network and i can make n receive calls.
but can not use my 4g data service.
however 3g service works , and i can see 3g written on top.
where as in my indian note 5 , when i use 3g , its written H+ . and when using 4g , its written 4g on top
But in imported n920p , 4g does not work and 3g works .but does not show h+ sign.. instead , shows 3g sign
Its running on android 6.0 , when i tried to update it , it says "Device has been modified in unauthorized way. try update via smart switch on pc or take to service center"
please help me on using data services on this phone in India and also can anyone guide on why its not getting update?
Click to expand...
Click to collapse
You need to find out what lte bands your carrier uses. And make sure they are comptible with the sprint varients lte bands.
TheMadScientist420 said:
You need to find out what lte bands your carrier uses. And make sure they are comptible with the sprint varients lte bands.
Click to expand...
Click to collapse
If what I've read is correct, Sprint Note 5s have the same hardware and radio band capability as the international version. So a hack or something should be possible. But how or what is way beyond me.
sinisin said:
If what I've read is correct, Sprint Note 5s have the same hardware and radio band capability as the international version. So a hack or something should be possible. But how or what is way beyond me.
Click to expand...
Click to collapse
Next would be to make sure your apn is correct
thanks for replying guys.
unauthorized firmware was loaded. so now it gets FRP lock .
Now i want to flash its stock firmware via odin, so i can use it again./
- does flashing it to stock n920P firmware will unlock the device? or it will remian sim unlocked?
- where can i find stock firmware?
TIA
Just got a S8+ from my brother and was having some troubles with it (can text/use data but not recieve/make calls) and found out that the cause was because the phone supported the 4G LTE band of my carrier but not the 3G band which is what my carrier uses for calls.
So how screwed am I? is there anything I can do to fix this?
Samsung Galaxy S8+
Model: SM-G9550
Version: 8.0.0.0
nidh0gg said:
Just got a S8+ from my brother and was having some troubles with it (can text/use data but not recieve/make calls) and found out that the cause was because the phone supported the 4G LTE band of my carrier but not the 3G band which is what my carrier uses for calls.
So how screwed am I? is there anything I can do to fix this?
Samsung Galaxy S8+
Model: SM-G9550
Version: 8.0.0.0
Click to expand...
Click to collapse
Try in settings - connections - mobile networks and change network mode to 2g/3g or 3g mode and see if that works.
Note: I am still on nougat so settimgs location may be slightly different on oreo.
spawnlives said:
Try in settings - connections - mobile networks and change network mode to 2g/3g or 3g mode and see if that works.
Note: I am still on nougat so settimgs location may be slightly different on oreo.
Click to expand...
Click to collapse
i've tried it and it didn't work as the specific model phone I have does not support the 3G band of my carrier (Freedom Mobile) so I can't connect to any of my carriers bands aside from the 4g LTE one
nidh0gg said:
i've tried it and it didn't work as the specific model phone I have does not support the 3G band of my carrier (Freedom Mobile) so I can't connect to any of my carriers bands aside from the 4g LTE one
Click to expand...
Click to collapse
Is this your model
https://www.sammobile.com/devices/galaxy-s8-plus/specs/SM-G9550/
If so I would get in contact with your provider and see if is compatible with there network frequencies. apart from changing providers I am not sure what you can do.
If I've done my research properly freedom mobile is Canadian region apparently there are to modes home and away have you tried the away mode
spawnlives said:
Is this your model
If so I would get in contact with your provider and see if is compatible with there network frequencies. apart from changing providers I am not sure what you can do.
If I've done my research properly freedom mobile is Canadian region apparently there are to modes home and away have you tried the away mode
Click to expand...
Click to collapse
yes that is my phone
i think away might actually work really well, how would i force it to only use away/roaming?
okay this is weird, so i turned roaming on, connected to a different carriers network (rogers) and i can text and data fine but still cannot make or recieve calls on a AWAY network....? does this mean it shouldn't be a network band problem?
it shouldnt be my sim card as my sim card works fine on my older phone fine (s7E) and i JUST got it replaced my the warranty service (to fix this problem, which it didnt). It shouldn't be the phone either as my brother put his sim back in the phone and he can make calls fine....... what is wrong here?
IT WORKED THANK YOU SO MUCH!!!
changing to rogers did not work (not sure why? maybe they use the same band is freedom)
however afterwards i changed to telus and i got calls!!
spawnlives said:
Try in settings - connections - mobile networks and change network mode to 2g/3g or 3g mode and see if that works.
Note: I am still on nougat so settimgs location may be slightly different on oreo.
Click to expand...
Click to collapse
any reason why you haven't upgraded yet??
cantenna said:
any reason why you haven't upgraded yet??
Click to expand...
Click to collapse
If you mean upgrade to Oreo I do have some minor issues at the moment nothing really major for me to worry about if I do upgrade. To save going way off topic here might be better to start a new thread or I could pm you if you like.
Hello XDA community,
I have a Mi Mix 3 Palace Edition phone and I am using AT&T for my carrier. The phone came with a Chinese ROM but I flashed it with a Global one. I have been trying to get 4G + LTE to work on the phone but so for all I am able to get is 3G. I have contacted ATT and was told that my account was not setup for it. So ATT's advanced technical support made sure the IME/my account on the phone was LTE enabled. I am still stuck on 3G. I have selected the correct APN for it but I do not connect.
What am I missing?
Preferred network Type?
preferred network LTE.
raven213 said:
Preferred network Type?
Click to expand...
Click to collapse
walkrye said:
preferred network LTE.
Click to expand...
Click to collapse
Did you checked if your apn is correct?
Try selecting 4G network manually. I faced issue like that initially with ATT MVNO. After seleting 4G network manually I am geetting 4G+
In the Settings, go to About Phone, and tap the storage until it brings you to the SIM and WiFi screen. Tap on the Phone Information for the SIM you are using and set that Network Type to UMTS/LTE.
AT&T blocks any device you did not purchase directly through them from using VoLTE and WiFi Calling. 4G is also LTE, so if you see the 4G icon, that is also LTE and 4G+ is also LTE-A.