Here is a Mega link to the new 7.0!! Thanks to @rmarinella for providing the original here.
Unzip and use odin.
I am not responsible for any problems you may encounter. I am just providing a link. Flash at your own risk
I can't extract the zip. Is the file password protected?
What's the password?
Sent from my SM-G955U using XDA-Developers Legacy app
there shouldnt be a password...
Thanks man I will try it again.
Sent from my SM-G955U using XDA-Developers Legacy app
lildoggs said:
Thanks man I will try it again.
Click to expand...
Click to collapse
Please let me know if it works. If not I will reupload.
bigTINY779 said:
Please let me know if it works. If not I will reupload.
Click to expand...
Click to collapse
Yes I was able to unzip it. I used winrar for anyone having this issue.
Sent from my SM-G955U using XDA-Developers Legacy app
Thanks for the link, however there is a bug in the stock frimware, the Bluetooth won't work after reboot unless you reset all connections.
avalanch said:
Thanks for the link, however there is a bug in the stock frimware, the Bluetooth won't work after reboot unless you reset all connections.
Click to expand...
Click to collapse
I didn't have any BT issues... But I did do a clean install through Smart Switch
Raheinm said:
I didn't have any BT issues... But I did do a clean install through Smart Switch
Click to expand...
Click to collapse
Thanks for ur reply may be I will try to fresh install it again. May be that would help .
Raheinm said:
I didn't have any BT issues... But I did do a clean install through Smart Switch
Click to expand...
Click to collapse
When I use SmartSwitch it recognizes that there is new firmware. I hit upgrade and then a download begins and completes. After that nothing. It's like the SmartSwitch is frozen. I have tried several times and no luck.
Suggestions?
advocate2 said:
When I use SmartSwitch it recognizes that there is new firmware. I hit upgrade and then a download begins and completes. After that nothing. It's like the SmartSwitch is frozen. I have tried several times and no luck.
Suggestions?
Click to expand...
Click to collapse
Try using the Samsung cable that came with it. I did a Samsung cloud backup then the device initialization bc i always like a fresh install instead of upgrading to min any issues.
advocate2 said:
When I use SmartSwitch it recognizes that there is new firmware. I hit upgrade and then a download begins and completes. After that nothing. It's like the SmartSwitch is frozen. I have tried several times and no luck.
Suggestions?
Click to expand...
Click to collapse
Yeah. I ran into the issue several times. I had to disable the antivirus on the desktop to get it to work.
Related
RUU_Speedy_Sprint_WWE_1.17.651.1_Radio_1.07.00.1129_NV_SPCS_1.52_1103_release_160079_signed.exe
Mirror 1
Just in case you are messing around and you mess something up!
The mirror seems to be kind of slow after I download it I will re-up it to a few other places.
steven1022 said:
Stock Sprint RUU
Just in case you are messing around and you mess something up!
The mirror seems to be kind of slow after I download it I will re-up it to a few other places.
Click to expand...
Click to collapse
I apologize for my stupidness but as I've never owned an HTC device I'm not 100% sure I understand how this file works. So, do you need to put it into download mode and then run the exe or just enable debugging and then run it?
Definitely thanks. This would presumably break root if we had it.
kenvan19 said:
I apologize for my stupidness but as I've never owned an HTC device I'm not 100% sure I understand how this file works. So, do you need to put it into download mode and then run the exe or just enable debugging and then run it?
Click to expand...
Click to collapse
You'll need to use HTC sync to RUU the phone, sort of like ODIN, except with HTC's software
herbthehammer said:
Definitely thanks. This would presumably break root if we had it.
Click to expand...
Click to collapse
You're welcome, Thanks button! =)
kenvan19 said:
I apologize for my stupidness but as I've never owned an HTC device I'm not 100% sure I understand how this file works. So, do you need to put it into download mode and then run the exe or just enable debugging and then run it?
Click to expand...
Click to collapse
theimpaler747 said:
You'll need to use HTC sync to RUU the phone, sort of like ODIN, except with HTC's software
Click to expand...
Click to collapse
Its basically your phones stock factory reset if you mess anything up being adventurous and trying to find a perm root. You plug your phone into your computer and run it from your desktop
or i can make a cleaned-up (senseless + bloat removed) stock rom with all the proprietary files needed.
epitaphromance said:
or i can make a cleaned-up (senseless + bloat removed) stock rom with all the proprietary files needed.
Click to expand...
Click to collapse
please make one and a link to sprint apps that we might want later on ?
Jo_795 said:
please make one and a link to sprint apps that we might want later on ?
Click to expand...
Click to collapse
definatly possible.
epitaphromance said:
definatly possible.
Click to expand...
Click to collapse
I'm excited for all the soon to be roms on the Shift =)
Sent from space!
Sweet!! Thanks for this.. where did you find it?..
kbrn said:
Sweet!! Thanks for this.. where did you find it?..
Click to expand...
Click to collapse
It was on the forums awhile back and I got it from some people on the irc
Sent from space!
Is this different than doing a hard reset?
Sent from my PG06100 using Tapatalk
Heelfan71 said:
Is this different than doing a hard reset?
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
I assume you mean restoring factory defaults which will wipe user data but it will not restore OS and kernel data whereas this will.
kenvan19 said:
I assume you mean restoring factory defaults which will wipe user data but it will not restore OS and kernel data whereas this will.
Click to expand...
Click to collapse
yeah, I think so. You can do a reset through the phone menus or through bootloader. That was the only 2 ways I knew. Will try this as my phone is a little sluggish after I did Zroot and deleted it and did a factory reset.
Heelfan71 said:
yeah, I think so. You can do a reset through the phone menus or through bootloader. That was the only 2 ways I knew. Will try this as my phone is a little sluggish after I did Zroot and deleted it and did a factory reset.
Click to expand...
Click to collapse
Guy you don't need to do factory resets to clear up sluggishness its quite simple reboot the phone remove superuser and reroot and its just as fast as the day u first got it
Sent from my PG06100 using Tapatalk
Heelfan71 said:
yeah, I think so. You can do a reset through the phone menus or through bootloader. That was the only 2 ways I knew. Will try this as my phone is a little sluggish after I did Zroot and deleted it and did a factory reset.
Click to expand...
Click to collapse
bcnice20 said:
Guy you don't need to do factory resets to clear up sluggishness its quite simple reboot the phone remove superuser and reroot and its just as fast as the day u first got it
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
The only reason to restore stock RUU would be if you borked your phone or were perm rooted and wanted to return the phone to the store.
Got it. Thanks
Sent from my PG06100 using Tapatalk
Error [170]: Usb connection error
cachorropedorro said:
Error [170]: Usb connection error
Click to expand...
Click to collapse
I received this error with my Heroc.
The way I fixed it was to have the phone at the bootloader when running the RUU. Not sure if that will work with this phone or not but worth a shot..
Restart the phone into bootloader - Power off and Power on while holding vol. down, or type adb reboot bootloader in your CMD prompt.
Once there make sure your phone is plugged in and says Fastboot USB at the top then try running the RUU again.
Let us know if it works.
cachorropedorro said:
Error [170]: Usb connection error
Click to expand...
Click to collapse
usb debugging enabled?
I downloaded the Flashfire apk in hopes I'd be able to flash from my phone without recovery and every time I try going into the app, it instantly force closes. Has this happened to anyone else?
It's probably because your bootloader is unlocked.
Honestly though I haven't heard of this.
I'm assuming you have the latest version and that you are rooted correct?
Has it worked at all on your setup?
Have you tried factory resetting, installing, and trying?
Maybe this might help someone who is more capable of helping than I am.
Sent from my SM-G920V using Tapatalk
twiz0r said:
It's probably because your bootloader is unlocked.
Honestly though I haven't heard of this.
I'm assuming you have the latest version and that you are rooted correct?
Has it worked at all on your setup?
Have you tried factory resetting, installing, and trying?
Maybe this might help someone who is more capable of helping than I am.
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
Have the latest version and I'm rooted. I've tried multiple times. Ah, I guess I'll just continue trying.
No issue with stock rooted.
No good. I knew one of the last 3 updates had a force close issue on 64 bit fixed. Was hoping it was that easy. Hopefully someone else will pop in for ya
Sent from my SM-G920V using Tapatalk
twiz0r said:
No good. I knew one of the last 3 updates had a force close issue on 64 bit fixed. Was hoping it was that easy. Hopefully someone else will pop in for ya
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
Thanks
twiz0r said:
It's probably because your bootloader is unlocked.
Honestly though I haven't heard of this.
I'm assuming you have the latest version and that you are rooted correct?
Has it worked at all on your setup?
Have you tried factory resetting, installing, and trying?
Maybe this might help someone who is more capable of helping than I am.
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
My supposed "unlocked bootloader." Ha! You got me laughing.
deliberate.dev said:
My supposed "unlocked bootloader." Ha! You got me laughing.
Click to expand...
Click to collapse
I had to throw that in there on ya. Sorry
I'm not always an @$$hole I swear
twiz0r said:
I had to throw that in there on ya. Sorry
I'm not always an @$$hole I swear
Click to expand...
Click to collapse
Good to know.
deliberate.dev said:
I downloaded the Flashfire apk in hopes I'd be able to flash from my phone without recovery and every time I try going into the app, it instantly force closes. Has this happened to anyone else?
Click to expand...
Click to collapse
There is one thing you might try. Delete the app. Go to your root folder data/data and delete the eu.chainfire.flash folder. Download and install the app again and see if it works.
Tulsadiver said:
There is one thing you might try. Delete the app. Go to your root folder data/data and delete the eu.chainfire.flash folder. Download and install the app again and see if it works.
Click to expand...
Click to collapse
Tried your suggestion, still doesn't work. Oh well, I'll just have to wait til something else comes along that'll let me flash.
deliberate.dev said:
I downloaded the Flashfire apk in hopes I'd be able to flash from my phone without recovery and every time I try going into the app, it instantly force closes. Has this happened to anyone else?
Click to expand...
Click to collapse
Where did you download the apk from?
What version is it?
When you say it "force closes", are you getting an error message?
Sent from my NCC-1701 using Tapatalk.
Finally got it working... then I go and upgrade my phone last night. Can't even use it til a new root method comes out.
deliberate.dev said:
Finally got it working... then I go and upgrade my phone last night. Can't even use it til a new root method comes out.
Click to expand...
Click to collapse
how did you get it working?
jonthn41 said:
how did you get it working?
Click to expand...
Click to collapse
setting your time to the year 2013
cant be connected to the internet
AlphaDroidzer said:
setting your time to the year 2013
cant be connected to the internet
Click to expand...
Click to collapse
why 2013 ? because thats when the device had its last software update?.. im trying to figure out how to get flashfire working on my tablet
jonthn41 said:
why 2013 ? because thats when the device had its last software update?.. im trying to figure out how to get flashfire working on my tablet
Click to expand...
Click to collapse
from what I gathered on google....
Devs stop supporting free version
if you dont want it to crash then buy pro
So after I flashed XstreStoLite 2.4, which is awesome, SmartSwitch will no longer recognize my device. It just says "Failed to connect to device". My computer recognizes my device just fine, but no luck with SmartSwitch. Does anyone know of a fix for this, or maybe just a work around? I just need my contacts restored. I appreciate it, guys.
Akw6190 said:
So after I flashed XstreStoLite 2.4, which is awesome, SmartSwitch will no longer recognize my device. It just says "Failed to connect to device". My computer recognizes my device just fine, but no luck with SmartSwitch. Does anyone know of a fix for this, or maybe just a work around? I just need my contacts restored. I appreciate it, guys.
Click to expand...
Click to collapse
Try to flash the 'Samsung Kies' addon with the aroma add-on package.
edgarf28 said:
Try to flash the 'Samsung Kies' addon with the aroma add-on package.
Click to expand...
Click to collapse
I will try that and report back. Thank you, sir.
EDIT: Quick question though, do I only need to flash the Kies package, or do I need to reflash everything that I've already installed, like fingerprint scanner support?
Akw6190 said:
I will try that and report back. Thank you, sir.
EDIT: Quick question though, do I only need to flash the Kies package, or do I need to reflash everything that I've already installed, like fingerprint scanner support?
Click to expand...
Click to collapse
No that's not needed, select only the Samsung Kies addon.
You will keep your previously installed addons.
edgarf28 said:
No that's not needed, select only the Samsung Kies addon.
You will keep your previously installed addons.
Click to expand...
Click to collapse
Awesome. Thank you
edgarf28 said:
No that's not needed, select only the Samsung Kies addon.
You will keep your previously installed addons.
Click to expand...
Click to collapse
Hi edgarf28 ,
is there a way to disable HD voice in this rom ?
my phone gives turned of signal when people call me , i can make calls however ,
i had the same problem on an iphone , once i switched HD voice off the problem is resolved .
Right after I updated my D850 to MM, my GPS doesn't get a fix on location properly. Sometimes it just does not work and sometimes when it does work it points me the wrong way. I've never had this issue before, the GPS also does not seem to be live too, meaning that it doesn't update constantly. Instead it jumps every 10-15 seconds. Am I the only one with the issue? :crying: :crying:
SnowTauren said:
Right after I updated my D850 to MM, my GPS doesn't get a fix on location properly. Sometimes it just does not work and sometimes when it does work it points me the wrong way. I've never had this issue before, the GPS also does not seem to be live too, meaning that it doesn't update constantly. Instead it jumps every 10-15 seconds. Am I the only one with the issue? :crying: :crying:
Click to expand...
Click to collapse
Did you try performing a factory reset?
Sent from my iPhone using Tapatalk
Twice, but the problem persists.
Edit: I did the hard reset through phone but didn't downgrade-reset to factory using PC if that's what you meant.
SnowTauren said:
Twice, but the problem persists.
Edit: I did the hard reset through phone but didn't downgrade-reset to factory using PC if that's what you meant.
Click to expand...
Click to collapse
So you wiped everything? Strange that should fix any software issues.
Sent from my iPhone using Tapatalk
hyelton said:
So you wiped everything? Strange that should fix any software issues.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I can definitely see this being a software problem with marshmallow. Ever since downloading it on my LG G3 D850 it can barley read sim cards anymore, and since D850 (as far as I know) can't downgrade I'm screwed.
FreshToast6000 said:
I can definitely see this being a software problem with marshmallow. Ever since downloading it on my LG G3 D850 it can barley read sim cards anymore, and since D850 (as far as I know) can't downgrade I'm screwed.
Click to expand...
Click to collapse
If it can barely read SIM cards that's a hardware issue. Software wouldn't cause that. What do you mean you cannot downgrade? Yes you can.. You just follow my guide and use LGUP and flash kitkat.
Sent from my iPhone using Tapatalk
hyelton said:
If it can barely read SIM cards that's a hardware issue. Software wouldn't cause that. What do you mean you cannot downgrade? Yes you can.. You just follow my guide and use LGUP and flash kitkat.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Does not work for me because the model shows up as "Unknown"
FreshToast6000 said:
Does not work for me because the model shows up as "Unknown"
Click to expand...
Click to collapse
And where did you download LGUP? You must download the correct one or it will show unknown
Sent from my iPhone using Tapatalk
Just did another factory reset, the problem is still there . I've never rooted or tinkered with this phone other than installing OTA update, I don't know why I'd get this problem.
hyelton said:
And where did you download LGUP? You must download the correct one or it will show unknown
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Your post says "To Downgrade/upgrade to/from MM 6.0 You'll need to use LGUP in Post #3 Currently only for the D855". It won't work on D850 right?
SnowTauren said:
Your post says "To Downgrade/upgrade to/from MM 6.0 You'll need to use LGUP in Post #3 Currently only for the D855". It won't work on D850 right?
Click to expand...
Click to collapse
Yes it does work I haven't updated the Op. The only reason it might not work is show unknown and cannot detect phone if you don't download LGUP with the proper dll
Sent from my iPhone using Tapatalk
hyelton said:
Yes it does work I haven't updated the Op. The only reason it might not work is show unknown and cannot detect phone if you don't download LGUP with the proper dll
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
It's not working for me! I've attached screenshots below. I made sure I have the proper dll and that I connected to usb 2. I'm still getting model information check fail error!
Please help
SnowTauren said:
It's not working for me! I've attached screenshots below. I made sure I have the proper dll and that I connected to usb 2. I'm still getting model information check fail error!
Please help
Click to expand...
Click to collapse
The phone is in download mode correct??
Sent from my iPhone using Tapatalk
hyelton said:
The phone is in download mode correct??
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
The phone shows little icon for download mode and then after 2-3 seconds it comes to a page that says Firmware Update with a USB icon. And below it says "Do not unplug the USB connection until the process is complete" with a progress bar.
SnowTauren said:
The phone shows little icon for download mode and then after 2-3 seconds it comes to a page that says Firmware Update with a USB icon. And below it says "Do not unplug the USB connection until the process is complete" with a progress bar.
Click to expand...
Click to collapse
Okay yes that's download mode. Did you choose board_dl?
Sent from my iPhone using Tapatalk
hyelton said:
Okay yes that's download mode. Did you choose board_dl?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
No I left the default Upgrade DL in action mode, was I supposed to change it?
SnowTauren said:
No I left the default Upgrade DL in action mode, was I supposed to change it?
Click to expand...
Click to collapse
You don't have to but it's recommended if there's issues
Sent from my iPhone using Tapatalk
So after flashing my D850 from 4.4.2 to 7.0, I cannot access TWRP recovery. Ever since I flashed the rom, I keep getting these 3 errors:
"boot certification verify
secure booting error
cause:boot certification verify".
I can still boot into 7.0, but it's not fully functional. It's missing apps, functions, keeps crashing, etc.
Any suggestions to fixing this?
Huz416 said:
So after flashing my D850 from 4.4.2 to 7.0, I cannot access TWRP recovery. Ever since I flashed the rom, I keep getting these 3 errors:
"boot certification verify
secure booting error
cause:boot certification verify".
I can still boot into 7.0, but it's not fully functional. It's missing apps, functions, keeps crashing, etc.
Any suggestions to fixing this?
Click to expand...
Click to collapse
Only solution is to flash back to stock. CM normally seems to loose access to twrp. Not sure if there's a simple way of getting it back but normally all I know is flashing back to stock
Sent from my iPhone using Tapatalk
Thank for replying. Is there a good tutorial out there you can post on how to flash back to stock rom please? My current 7.0 rom won't even let be root my device.
hyelton said:
Only solution is to flash back to stock. CM normally seems to loose access to twrp. Not sure if there's a simple way of getting it back but normally all I know is flashing back to stock
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Thank for replying. Is there a good tutorial out there you can post on how to flash back to stock rom please? My current 7.0 rom won't even let be root my device.
Huz416 said:
Thank for replying. Is there a good tutorial out there you can post on how to flash back to stock rom please? My current 7.0 rom won't even let be root my device.
Click to expand...
Click to collapse
There's a back to stock guide in the general section.
Sent from my iPhone using Tapatalk
hyelton said:
There's a back to stock guide in the general section.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Would it be possible for you to post a link please? I'm new to this website and I cannot find it.
Huz416 said:
Would it be possible for you to post a link please? I'm new to this website and I cannot find it.
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2785089
You would follow the tot method, and be sure to choose board_dl when you choose the tot and dll file in the software
Sent from my iPhone using Tapatalk
hyelton said:
Only solution is to flash back to stock. CM normally seems to loose access to twrp. Not sure if there's a simple way of getting it back but normally all I know is flashing back to stock
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
hyelton said:
https://forum.xda-developers.com/showthread.php?t=2785089
You would follow the tot method, and be sure to choose board_dl when you choose the tot and dll file in the software
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
board_dl meaning this link, right? http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/
Huz416 said:
board_dl meaning this link, right? http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/
Click to expand...
Click to collapse
That's where your firmware will be use but board_dl is a setting in flashtool
Sent from my iPhone using Tapatalk
hyelton said:
That's where your firmware will be use but board_dl is a setting in flashtool
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Oh, okay. I'll try it out tonight and will get back to you if I need anymore help. Thank you so much.
hyelton said:
That's where your firmware will be use but board_dl is a setting in flashtool
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
The only problem I'm having is that I can't change the port settings. My PC recognizes my G3 as "AOSP on D850".
Huz416 said:
The only problem I'm having is that I can't change the port settings. My PC recognizes my G3 as "AOSP on D850".
Click to expand...
Click to collapse
So you can change the port under device manager? What's the error?
Sent from my iPhone using Tapatalk
hyelton said:
So you can change the port under device manager? What's the error?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
After clicking on my device under portable devices in device manager, the only options I get are general, driver, details, events, power management. I'm using Windows 10 to do this.
Huz416 said:
After clicking on my device under portable devices in device manager, the only options I get are general, driver, details, events, power management. I'm using Windows 10 to do this.
Click to expand...
Click to collapse
It wouldnt be under portable devices, it would be under Communication Ports. If you don't see that you would need to unhide them
hyelton said:
It wouldnt be under portable devices, it would be under Communication Ports. If you don't see that you would need to unhide them
Click to expand...
Click to collapse
I'm honestly about to throw my phone against a wall right now. I cannot boot into download mode anymore, my computer won't allow me change the port settings, the only thing I can do is enter the rom. USB debugging still works and I can transfer files, but everything else is broken.
Huz416 said:
I'm honestly about to throw my phone against a wall right now. I cannot boot into download mode anymore, my computer won't allow me change the port settings, the only thing I can do is enter the rom. USB debugging still works and I can transfer files, but everything else is broken.
Click to expand...
Click to collapse
So your using a USB 2.0 only port right when trying to put the device into download mode?
I still dont understand why your saying it wont allow you to change the port settings? I've never ever seen this. If the port is there you can change it. Remmeber your phone HAS to be in download mode for the com port to show up to change it to com41. Why not try LGUP?
hyelton said:
So your using a USB 2.0 only port right when trying to put the device into download mode?
I still dont understand why your saying it wont allow you to change the port settings? I've never ever seen this. If the port is there you can change it. Remmeber your phone HAS to be in download mode for the com port to show up to change it to com41. Why not try LGUP?[/QUOTE
Thank you, I was using the wrong USB port. It's currently installing the device. What is LGUP?
Click to expand...
Click to collapse
Huz416 said:
hyelton said:
So your using a USB 2.0 only port right when trying to put the device into download mode?
I still dont understand why your saying it wont allow you to change the port settings? I've never ever seen this. If the port is there you can change it. Remmeber your phone HAS to be in download mode for the com port to show up to change it to com41. Why not try LGUP?[/QUOTE
Thank you, I was using the wrong USB port. It's currently installing the device. What is LGUP?
Click to expand...
Click to collapse
LGUP is part of the back to stock guide. Theres KDZ flash tool, TOT flashtool, and LGUP which flashes both tot and kdz files.
Click to expand...
Click to collapse
hyelton said:
Huz416 said:
LGUP is part of the back to stock guide. Theres KDZ flash tool, TOT flashtool, and LGUP which flashes both tot and kdz files.
Click to expand...
Click to collapse
It says it's only for the D855 model? Not D850?
Click to expand...
Click to collapse
Huz416 said:
hyelton said:
So your using a USB 2.0 only port right when trying to put the device into download mode?
I still dont understand why your saying it wont allow you to change the port settings? I've never ever seen this. If the port is there you can change it. Remmeber your phone HAS to be in download mode for the com port to show up to change it to com41. Why not try LGUP?[/QUOTE
Thank you, I was using the wrong USB port. It's currently installing the device. What is LGUP?
Click to expand...
Click to collapse
Huz416 said:
hyelton said:
It says it's only for the D855 model? Not D850?
Click to expand...
Click to collapse
Its for every model
Click to expand...
Click to collapse
Click to expand...
Click to collapse