[THEME][SPLASH SCREEN]Samsung Galaxy S8+/N7FE/N8 - Samsung Galaxy S7 Edge Themes, Apps, and Mods

SAMSUNG S7/S7E SAMSUNG SPLASH SCREENS
IF THERE ARE ANY ISSUES REBOOT TO DOWNLOAD AND FLASH LATEST STOCK BOOTLOADER
SAMSUNG GALAXY S8+ SPLASH SCREEN
How to use it?
-Flash via ODIN [BL TAB]
-Flash via TWRP
Odin VERSION
-It includes Splash Screen+S8 Offline Charging Animation
Changelog V3
-Fixed Sizes of Screens for both flat and edge
-Added Bootanimation/Offline Charging Animation for FLASHABLE ZIPS
Changelog V2
-Fixed Download Mode Issues
-Fixed Offline/Low Power Charging Mode
REVERT BACK TO STOCK ODIN
S7 EDGE
S7 FLAT
Flashable
EDGE
FLAT
REVERT BACK TO STOCK FLASHABLE
EDGE
FLAT
VIDEO DEMO Thanks Welly
https://youtu.be/G6x46ptcfPs
SAMSUNG GALAXY N8 SPLASH SCREEN
-Initial Release
-Updated Bootloader to QIL
DOWNLOAD AFH
SAMSUNG GALAXY N7 FE SPLASH SCREEN
-Initial Release
-Updated Bootloader to QIL
DOWNLOAD AFH
XDA:DevDB Information
[THEME][SPLASH SCREEN]Samsung S8+/N7FE/N8, Theme for the Samsung Galaxy S7 Edge
Contributors
Ouweshs28
Version Information
Status: Stable
Created 2017-04-19
Last Updated 2017-12-15

thank you so much, is working great, you are able to get the edge notifications from the S8+?

Can you make the splash s8+ screen a bit smaller

awesome

Helo , after execute it with odin (im using Galaxy S7 E) - have success result and changed, BUT when i want to revert it back my pc (Odin) won't detect my phone Download mode anymore (on charging state still detected)

after flash via odin . icannot flash back using odin , because odin cannot detect my S7 edge/. how to solve it?

hendruazzams said:
after flash via odin . icannot flash back using odin , because odin cannot detect my S7 edge/. how to solve it?
Click to expand...
Click to collapse
omg me too! :crying::crying:

o m g... i cannot upgrade or downgrade if odin cannot detect my S7 edge :crying::crying::crying::crying::crying::crying:
Violinia said:
omg me too! :crying::crying:
Click to expand...
Click to collapse

hendruazzams said:
o m g... i cannot upgrade or downgrade if odin cannot detect my S7 edge :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
yeahh, someone please help us

Finally my S7 edge connect again to odin.
flash your S7 edge with Smart switch. and than after reboot and than normal again . you can connect your s7edge to odin
Violinia said:
yeahh, someone please help us
Click to expand...
Click to collapse

pogi.paul0119 said:
Can you make the splash s8+ screen a bit smaller
Click to expand...
Click to collapse
Sure
About download mode works fine for me..
I will check again whats wrong
Try booting to download mode via twrp or via recovery toogle in advance mode and check
EDIT ADDED FIX

hendruazzams said:
Finally my S7 edge connect again to odin.
flash your S7 edge with Smart switch. and than after reboot and than normal again . you can connect your s7edge to odin
Click to expand...
Click to collapse
Thank you very much! it works! :highfive:

Hi folks
what is this?
can sb upload a video smt?
so we can understand is it worth to flash
thanks

when i flash in odin it fails ...s7e stock rooted rom

hiyachi-32 said:
Hi folks
what is this?
can sb upload a video smt?
so we can understand is it worth to flash
thanks
Click to expand...
Click to collapse
Added to op
comptonhubbard said:
when i flash in odin it fails ...s7e stock rooted rom
Click to expand...
Click to collapse
Won't work on stock mate

video not working ☹

Ouweshs28 said:
Added to op
Won't work on stock mate
Click to expand...
Click to collapse
this only works on AOSP?

Just so you know the s8+ boot splash is not in center for s7 flat g930f. i have no idea how to fix it but maybe you can edit it to being better. if needed i can post a picture please let me know if you can do a fast fix for us. Also do you have a revert to stock for s7 flat?
twrp flash files Do not work btw i could only use the .tar with Odin. thanks

as you see. if you look at the Power button as a reference point it should be centered on that but it is about 1cm to the left
Sent from my SM-G955F using Tapatalk

bustyouup4free said:
Just so you know the s8+ boot splash is not in center for s7 flat g930f. i have no idea how to fix it but maybe you can edit it to being better. if needed i can post a picture please let me know if you can do a fast fix for us. Also do you have a revert to stock for s7 flat?
twrp flash files Do not work btw i could only use the .tar with Odin. thanks
Click to expand...
Click to collapse
Will have a look thanks

Related

Galaxy S6 920F bricked?

Hi,
I think i soft-bricked my phone by flashing modem and bootloader in my S6 International 920F phone.
Downloaded 5.1.1 modem and bootloader from this topic and followed the instructions exactly:
http://forum.xda-developers.com/gal...-xtrestolite-pure-edition-1-0-beta-1-t3082467
ODIN gave no sign of a failure so after flashing the phone rebooted and now it won't further than the Galaxy S6 bootscreen.
In the top of the screen a message says: "SYSTEM REV. CHECK FAIL. DEVICE: 2 BINARY: 1"
I've searched already for a solution but i can't find a specific.
Anyone who can help me please?
Got it recovered trough Kies3 but still don't know what went wrong
cvdv1991 said:
Got it recovered trough Kies3 but still don't know what went wrong
Click to expand...
Click to collapse
how did you do it? cz i had the same problem
Reflash your S6 with standard 5.1.1 ROM via odin.
I did a restore via Kies3, wasn't expecting much but did the trick.
Thats good.
madguylb said:
how did you do it? cz i had the same problem
Click to expand...
Click to collapse
Did you get your phone working? I have the same problem.
FlyingColors said:
Did you get your phone working? I have the same problem.
Click to expand...
Click to collapse
yes i got it working finally, just download the 5.1.1 official rom from samfirmware related to ur region and install it from odin 3.10.6 the version in the XtreStoLite link not any other odin cz it did not work to me.
madguylb said:
yes i got it working finally, just download the 5.1.1 official rom from samfirmware related to ur region and install it from odin 3.10.6 the version in the XtreStoLite link not any other odin cz it did not work to me.
Click to expand...
Click to collapse
Yeah I got it working. Doing just AP worked for me. Literally took me an hour of crossing my fingers hoping I didn't brick my phone. All good though, thanks.
FlyingColors said:
Yeah I got it working. Doing just AP worked for me. Literally took me an hour of crossing my fingers hoping I didn't brick my phone. All good though, thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s6/help/galaxy-s6-sm-920f-rom-installed-stuck-t3162852

S6 Boot Problem - Please Help Urgent!

Hey guys, how are you?
I'm having an urgent situation, i lost access to my samsung s6!
I was on the middle of an update and i guess something went wrong, the phone rebooted and now is stuck on "Samsung Galaxy S6" Logo" and it doesn't boot.
I made a small video on youtube just to show the problem:
https://www.youtube.com/watch?v=RONDcXyz3L8
What can i do to solve this? I have no phone and i am desperate.
Thanks in advance!
flave7 said:
Hey guys, how are you?
I'm having an urgent situation, i lost access to my samsung s6!
I was on the middle of an update and i guess something went wrong, the phone rebooted and now is stuck on "Samsung Galaxy S6" Logo" and it doesn't boot.
I made a small video on youtube just to show the problem:
https://www.youtube.com/watch?v=RONDcXyz3L8
What can i do to solve this? I have no phone and i am desperate.
Thanks in advance!
Click to expand...
Click to collapse
Provide more info sir! Are you on stock or custom firmware in case you are rooted?
Sent From my SM-G928F via Tapa
Try to use Smart Switch
Just plug the phone to PC in download mode and rescue it via Smart Switch. It'll download the right firmware for your device and flash it automatically.
Here's how you can do it;
How did it go?
Sent from my SM-G920F using Tapatalk
First of all, thanks for the help! i went with the smart switch but i'm stuck on a problem.
it asks me the serial number of the mobile, since i dont have the box with me how can i find out the serial number?
i used the volume up - home - power on button, i went to the recovery mode. wipe data etc doesn't work (i knew this already).
but i went to recovery mode to go into the logs and try to find the serial number. i did find "ro.serialno= xxx"
tried this one but got "invalid serial" ... where can i find the correct one?
lucky me.
Ps. stock original samsung with android 5.1
Good morning! Anyone? Help? (...)
thanks in advance
flave7 said:
Good morning! Anyone? Help? (...)
thanks in advance
Click to expand...
Click to collapse
Did you try this code for to find your IMEI Serial Number: *#06#
Sent From my SM-G928F via Tapa
The easiest solution.. Download the whole correct firmware for your s6 from sammobile or samfirm or whateve and flash it via odin.. It will resume working perfectly. .
zizon65 said:
Did you try this code for to find your IMEI Serial Number: *#06#
Sent From my SM-G928F via Tapa
Click to expand...
Click to collapse
I can't do that since the phone doesn't boot. it stays on samsung s6 logo
Prince Mohit said:
The easiest solution.. Download the whole correct firmware for your s6 from sammobile or samfirm or whateve and flash it via odin.. It will resume working perfectly. .
Click to expand...
Click to collapse
Can you help me doing that? will that void my warranty? my samsung is stock and has warranty, don't want to do something wrong.
i'm experienced in IT, but i'm new to this kind of problems
flave7 said:
I can't do that since the phone doesn't boot. it stays on samsung s6 logo
Can you help me doing that? will that void my warranty? my samsung is stock and has warranty, don't want to do something wrong.
i'm experienced in IT, but i'm new to this kind of problems
Click to expand...
Click to collapse
In this case the easiest way is to follow the instructions given by Prince Mohit
Sent From my SM-G928F via Tapa
---------- Post added at 03:38 PM ---------- Previous post was at 03:31 PM ----------
zizon65 said:
In this case the easiest way is to follow the instructions given by Prince Mohit
Sent From my SM-G928F via Tapa
Click to expand...
Click to collapse
Flashing a stock firmware will not void your warranty, unless you Knox has already been tripped IMHO
Sent From my SM-G928F via Tapa
the easiest solution sounded like using smart switch. however since i don't have access to the serial (arggh.. the most simple thing ever) i can't use it.
I am going to try to go with prince mohit advice.
problem 1:
in sammobile.com i can't find firmware for G920F with bootloader G920FXXU3C0I9 (the one i have on my phone)
i have to use this one or can i use other?
on samfirm i found:
- [FULL] Galaxy S6 - G920F | G920FXXU3COI9/BTU | Android 5.1.1 | 12/25/2015
. [FULL] Galaxy S6 - G920F : G920FXXU3COI9/XSE - Android 5.1.1 | 12/25/2015
which one should i go? i am sorry for asking so many questions but i dont want to brick my phone :\
Going to download this 2 files. they look like the correct ones to me:
G920FXXU3COI9_G920FBTU3COJ1_BTU_PAC.zip
ZEROFLTE_EUR_OPEN.pit
Also going to download odin ... what's the sequence on ODIN to do this? What should i do with the .pit file?!
Going to download this 2 files. they look like the correct ones to me:
G920FXXU3COI9_G920FBTU3COJ1_BTU_PAC.zip
ZEROFLTE_EUR_OPEN.pit
Also going to download odin ... what's the sequence on ODIN to do this? What should i do with the .pit file?!
guys i did it! it's working! used the stock rom BTU (UK) ... and ODIN ... it's all fine now!
thanks a million people!
flave7 said:
Going to download this 2 files. they look like the correct ones to me:
G920FXXU3COI9_G920FBTU3COJ1_BTU_PAC.zip
ZEROFLTE_EUR_OPEN.pit
Also going to download odin ... what's the sequence on ODIN to do this? What should i do with the .pit file?!
Click to expand...
Click to collapse

custom binary blocked by frp lock

Got myself in a bind. Bought a new Note 5 today to upgrade to 64GB. Forgot to OEM unlock, and the phone is bricked for the moment. The new image N920TUVU3DPG1 isn't available to download yet. Any suggestions, or does anyone know where the new image can be found yet? What a rookie mistake! Smart Switch in emergency recovery tries to flash N920TUVU2DPD1 and fails. Downgrading doesn't work either.
same here. where can we get it from?
rmarinella said:
Got myself in a bind. Bought a new Note 5 today to upgrade to 64GB. Forgot to OEM unlock, and the phone is bricked for the moment. The new image N920TUVU3DPG1 isn't available to download yet. Any suggestions, or does anyone know where the new image can be found yet? What a rookie mistake! Smart Switch in emergency recovery tries to flash N920TUVU2DPD1 and fails. Downgrading doesn't work either.
Click to expand...
Click to collapse
Just downgrade to an older version via Odin if possible. It can be done on Verizon so I don't see why not on yours.
MrMike2182 said:
Just downgrade to an older version via Odin if possible. It can be done on Verizon so I don't see why not on yours.
Click to expand...
Click to collapse
I tried the previous version while in download mode using Odin. Loaded the stock rom in the AP slot and started it then it failed pretty quick. The com shows connected before I hit start but it still fails.
mistaedster said:
I tried the previous version while in download mode using Odin. Loaded the stock rom in the AP slot and started it then it failed pretty quick. The com shows connected before I hit start but it still fails.
Click to expand...
Click to collapse
You have to make sure you have the correct firmware! You should be able to see which one is already on the phone while in recovery mode.
MrMike2182 said:
You have to make sure you have the correct firmware! You should be able to see which one is already on the phone while in recovery mode.
Click to expand...
Click to collapse
That's the problem. I can't find the right firmware
mistaedster said:
That's the problem. I can't find the right firmware
Click to expand...
Click to collapse
I think we're stuck with a very expensive paperweight until Samsung releases full firmware for the N920TUVU3DPG1 update.
rmarinella said:
I think we're stuck with a very expensive paperweight until Samsung releases full firmware for the N920TUVU3DPG1 update.
Click to expand...
Click to collapse
I actually got darthstalker rom working on mine then moved to sick ass rom. I flashed the stock deodexed kernel from original android development then the rom via twrp
mistaedster said:
I actually got darthstalker rom working on mine then moved to sick ass rom. I flashed the stock deodexed kernel from original android development then the rom via twrp
Click to expand...
Click to collapse
Stock Kernel from where?
rmarinella said:
Stock Kernel from where?
Click to expand...
Click to collapse
http://forum.xda-developers.com/tmo...ernel-stock-modified-kernel-touchwiz-t3194148
mistaedster said:
http://forum.xda-developers.com/tmo...ernel-stock-modified-kernel-touchwiz-t3194148
Click to expand...
Click to collapse
OK, thanks. Looks like we aren't in the same situation though. I can't get into, or flash TWRP.
Stock N920TUVU3DPG1 Firmware now available here: https://www.androidfilehost.com/?fid=24588232905721433
rmarinella said:
Stock N920TUVU3DPG1 Firmware now available here: https://www.androidfilehost.com/?fid=24588232905721433
Click to expand...
Click to collapse
Hope u fixed ur problem, I'm still on Note 4, was waiting for u to fix the new firmware for us last month, and now we just got another one, so shocked Samsung is actually taking care of the Note 4 N910T,
My rom boots up, but can't see sim card, external storage, wifi doesn't connect and so forth, I guess they did something with the new MM that @dsixda kitchen doesn't work correctly somewhere anymore,
need to learn Ubuntu, not easy with no help,,, I made an external drive with 16.04 but need to java development and figure the rest out, not easy with 2 kids.. and wifey..
and u r also in FL, by the way thanks for the updater script for the past v5.1.1 roms we had...
Samsung keeps raising prices on these phones, ridiculous no reason the new Note 7 will be $849 cause they r only making egde style phones.
I'm glad they pushed me to my limits, first it was HTC, I had all the HTC phone till M7, for when they had the first tmobile dash windows phone.. haha..
don't know whats next, maybe crapple... no rush since the note 4 is still rocking good,
but the Note 7, water resistence is awesome is the only kool thing I guess.
Seems like I'm having the same problem frp lock and drk has anyone found a solution yet. I can't seem to find any way to fix this yet. Appreciate any help in advance
I could help with this issue, just let me know if you need my assistant I would have to remotely do this to accomplish this thanks..

GALAXY S7 EDGE 7.0 Nougat (Canada)

I would like to start this thread in regards to the latest 7.0 Nougat update released by Samsung.
The Galaxy S7 Edge 7.0 Update is compatible with the Canadian variant 935w8.
The process for installation has been confusing for many people and unsuccessful.
I have been successful and am currently running android 7.0 Nougat on the Galaxy S7 Edge.
I will be making a video demonstration pointing out some new and much needed features and bug fixes included with the 7.0 update for the Galaxy S7 Edge Canadian Variant 935w8.
MAYBE EVEN POSSIBLE GOOGLE DAYDREAM SUPPORT AND COMPARABILITY. Still testing this tho.
INSTALL METHOD USING ODIN. (POSSIBLE DATA LOSE SO BACK UP JUST IN CASE):
BACK UP INTERNAL FILES FROM THE PHONE SD CARD WILL BE FINE.
HAVE YOUR PHONE CHARGED AT A DECENT LEVEL JUST IN CASE IS WHAT I SAY.
BACK UP ANYTHING YOU MAY BE CONCERNED OF.
BE CAREFUL I AM NOT RESPONSIBLE IF SOMETHING GOES WRONG.
MANY CONFIRM THIS METHOD WORKING ALONG WITH ME HE TRIED IT FIRST.
1) Put phone in download mode.
2) Connect phone to latest Odin version.
3) install AP from 7.0 Nougat update file ALONG with the CSC from the 6.0.1 update file.
If all goes well you have now achieved the Nougat 7.0 update on you Galaxy S7 Edge in Canada 935w8.
Optional:
If report does get stuck you can try forcing the phone to restart and then the update process should continue.
If you are in a boot loop try again.
VIDEOS:
More details, instructions and link's coming soon.
awesome. looking forward to trying this out!
Leonidas87 said:
I would like to start this thread in regards to the latest 7.0 Nougat update released by Samsung.
The Galaxy S7 Edge 7.0 Update is compatible with the Canadian variant 935w8.
The process for installation has been confusing for many people and unsuccessful.
I have been successful and am currently running android 7.0 Nougat on the Galaxy S7 Edge.
I will be making a video demonstration pointing out some new and much needed features and bug fixes included with the 7.0 update for the Galaxy S7 Edge Canadian Variant 935w8.
Click to expand...
Click to collapse
Is this the "official" release or part of the Beta testing that's been going on?
More screenshots
greatg said:
Is this the "official" release or part of the Beta testing that's been going on?
Click to expand...
Click to collapse
Part of the beta testing but on the Canadian variant there has been a lot of confusion and failed attempts for people trying to manually update.
I was able to get it done and am now on 7.0
Retracing my steps so I can better help others.
fguerra024 said:
awesome. looking forward to trying this out!
Click to expand...
Click to collapse
So much confusion an most people forget about support for Canadians. Samsung should just include Canada considering we have the Exynos processor.
Oh yeah did I forget to mention possible DAYDREAM SUPPORT!!
I tried flashing it with odin but did not work
Aakash Kaushal said:
CONFIRMED WORKING ON CANADIAN S7 EDGE
Just dont flash any bootloader or modem!!
Simply flash the rom thats it!!
Download link - https://drive.google.com/file/d/0B8Kb8GJMvdFjVXE4LUFaWHNVTEE/view
Flash the rom through twrp,dont need to wipe data just wipe system and cache...
ENJOY
Click to expand...
Click to collapse
that's what this person said. havent tried it yet though.
Daydream running on the S7 Edge.
Better video coming soon.
Working on controller support.
CONFIRMED WORKING ON CANADIAN S7 EDGE
Just dont flash any bootloader or modem!!
Simply flash the rom thats it!!
Download link - https://drive.google.com/file/d/0B8Kb8GJMvdFjVXE4LUFaWHNVTEE/view
Flash the rom through twrp,dont need to wipe data just wipe system and cache...
ENJOY
See the screenshot below,if u have any problem!! Ask me
I got Google Daydream FULLY working on the Galaxy S7 EDGE running 7.0 Nougat.
VIDEO COMMING SOON.
STAY TUNED AND HIT THAT LIKE BUTTON IT HELPS.
DETAILS AND INSTRUCTIONAL VIDEO COMING SOON ALSO.
Aakash Kaushal said:
CONFIRMED WORKING ON CANADIAN S7 EDGE
Just dont flash any bootloader or modem!!
Simply flash the rom thats it!!
Download link - https://drive.google.com/file/d/0B8Kb8GJMvdFjVXE4LUFaWHNVTEE/view
Flash the rom through twrp,dont need to wipe data just wipe system and cache...
ENJOY
See the screenshot below,if u have any problem!! Ask me
Click to expand...
Click to collapse
is this zip file just the ROM then? Thanks,
marktang said:
is this zip file just the ROM then? Thanks,
Click to expand...
Click to collapse
Yes its just the rom...flash it via twrp thats it!!
Aakash Kaushal said:
Yes its just the rom...flash it via twrp thats it!!
Click to expand...
Click to collapse
Cool i'm guessing all the data will still be there since we are not wiping the data.
marktang said:
Cool i'm guessing all the data will still be there since we are not wiping the data.
Click to expand...
Click to collapse
Yes it will be There...if u dont wipe data!!!!
Just simply wipe system and flash the rom!!!
You wont lose your data
So you need to root your device then, right? Can this be done without root? I am asking because my S7 Edge just developed yesterday a top to bottom green line on the display and I will want it to be replaced by Samsung... if I root it they probably will refuse to replace it... right?
Daydream running on the Galaxy S7 EDGE with controller support.
bmaltais said:
So you need to root your device then, right? Can this be done without root? I am asking because my S7 Edge just developed yesterday a top to bottom green line on the display and I will want it to be replaced by Samsung... if I root it they probably will refuse to replace it... right?
Click to expand...
Click to collapse
Yes....replace your phone first..otherwise ur warranty will be voided!!

HELP I have bricked by S7 Exynos

Hi
I have a massive problem with my S7.
I wanted to install TWRP on my phone so I could take a backup of my MM setup before upgrading to Nougat.
Once I installed TWRP I found that due to encryption on the device I couldnt take a backup. I then tried to reboot my phone but now it gets stuck on the Samsung Galaxy S7 logo and just boot loops.
Can anyone help or suggest how to get my phone working again?
Cheers
Glostermeteor
glostermeteor said:
Hi
I have a massive problem with my S7.
I wanted to install TWRP on my phone so I could take a backup of my MM setup before upgrading to Nougat.
Once I installed TWRP I found that due to encryption on the device I couldnt take a backup. I then tried to reboot my phone but now it gets stuck on the Samsung Galaxy S7 logo and just boot loops.
Can anyone help or suggest how to get my phone working again?
Cheers
Glostermeteor
Click to expand...
Click to collapse
I had the exact same problem. In your case I just booted my device into "Download Mode" and flashed the stock Nougat from the Sammobile page using Odin (download the appropriate version for your device) [in Download Mode it should say what version of Galaxy S7 you have, for example G930-5F/FD and so on] then you are good to go.
P.S. Don't worry, that is just a softbrick it's nothing to really worry about.
EDIT: If you want an simpler process, try to flash the stock rom using Smart Switch on your computer. Both methods worked for me
dotnexus said:
I had the exact same problem. In your case I just booted my device into "Download Mode" and flashed the stock Nougat from the Sammobile page using Odin (download the appropriate version for your device) [in Download Mode it should say what version of Galaxy S7 you have, for example G930-5F/FD and so on] then you are good to go.
P.S. Don't worry, that is just a softbrick it's nothing to really worry about.
EDIT: If you want an simpler process, try to flash the stock rom using Smart Switch on your computer. Both methods worked for me
Click to expand...
Click to collapse
Thanks! I actually managed to get it going again by flashing this tool:
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
Wrong thread
Sent from my Galaxy S7 using XDA Labs
@Vatsal
Sorry to mention you again, can you move this thread to Q&A as well? Thanks mate

Categories

Resources