Database Info

[Q] CMW (internal storage) no ROM (on SD) on TF101 b80

hi! my apologies but i searched and read alot of post already on how to solve this.
i flashed Roach latest CMW how ever being so stupid i forgot to put a ROM on internal memory. did full wipe already and i have no ROM to flash as it reads internal memory only.
ive read alot of post regarding the concern, i want to try to push a ROM on internal drive using ADB but when i run "adb devices" nothing is found.
any suggestions or any links to posts that i might get help or tutorial. im not an expert on using ADB so keep instructions simple, im a noob i admit it but i just need help. thanks!
read through posts "[Troubleshooting/Solved] ClockworkMod recovery 5.5.0.4 from Koush" "Used roach's new CWM recovery, now can't intall rom" "

im on recovery and when i run adb devices it just blank. any walk through is much appreciated!

Do yo have USB debugging on?

I dont know because i was about to flash a new rom so i did a full wipe already

Did you ever get ADB working before all this? USB debugging usually have to be turn on by the user. In Settings>Developer options.

i havent with my tablet but with my htc desire hd i used adb. and when ever i flash a ROM on my tf i usually turn on usb debugging always. right now in on recovery roach r2. my ROM is on my external memory. also tried to do a nvflash how ever whenever i run the download.bat cmd opens then closes 3 secs maybe

i also got a new sdk from this forum " [GUIDE] Getting ADB Setup; An Idiots' proof guide on getting ADB working for Rooting!" as ave said above when i type "adb devices" its just blank and does not list any device.

I had exactly the same problem - I'm not sure about tablet version that I own, but I've flashed Wipe Lite and new Recovery. I also have HTC phone that I've been using on the same PC .
I've spent an hour trying to get my TF back on feet and I managed it.
I would recommend uninstalling all HTC and ASUS software and drivers, rebooting PC and installing just ASUS PC Suite. It worked in my case - suddenly Device ID showed up for a few seconds before ADB reported "no device" again.
So I've pushed Rogue XM Recovery to data/media:
adb push roguexm data/media
Of course use name of zip file instead "roguexm" in command above.
After that zip file showed up on sdcard and I could flash it - it doesn't support AROMA but it works quite fine otherwise.
Hope it'll work in your case. Good luck!

Hope it will help
I once were in your case, did full wipe and forgot to put a Rom in internal memory. But in my case I just rebooted the transformer and all of a supprise, my tablet reverted to the stock Rom! I dont know how this happend but may be Asus did something to keep stock Rom persistent whatever you have flashed roms or CWMs.
So i hope this also happened in your case, just give it a try. Good luck!

If he did "Full Wipe - factory reset" then he should be able to boot HC/ICS and from that copy files onto internal /sdcard.
But if he used Android Revolution Super Wipe script either Lite or Full then he has nothing to boot into, no system at all - I've done that Only thing that left was recovery without external sdcard support, so I had nothing to install...
ASUS and HTC drivers have some issues and make everything harder than it should be, that's why I recommend to uninstall all HTC and ASUS software, rebooting PC and installing ASUS PC Suite only, to have "clean" drivers on PC.
I've tried different drivers and none of them worked, until I've done that.
Ok, I'll try to write it simple, I'm not sure if I can post links so just in case I'll give thread names. If it will be too simple don't get mad - ok?
1. Uninstall ASUS and HTC software, reinstall ASUS software like mentioned above.
2. Create folder on your C: drive called CWM
3. Go to post "Eee Pad Transformer Android Development\[Recovery] Rogue XM Recovery v1.3.0 (CWM-based Recovery v5.0.2.7" thread - http://forum.xda-developers.com/showthread.php?t=1446019
and "save as..." cwm_recovery-5027_rogue_rburrow-tf101-r1.zip to C:\CWM
4. Highlight/select command below:
adb push cwm_recovery-5027_rogue_rburrow-tf101-r1.zip data/media
then right click on it and select "copy" - it will save you typing it later.
5. Boot Recovery on your Transformer and connect it to PC, let system install device drivers
6. Click START, "Run...", type: cmd
7. It should show you path to your profile folder - C:\Users\yourname>
8. Type: cd /CWM
it will change folder to C:\CWM>
9. type: adb devices
(it should give you your device ID, if it still will give "no device id" then there I can't help you - I'm sorry)
10. right click on black background and select "paste" (you'll see command that you've copied from number 4), then press enter
11. It should copy recovery onto your internal sdcard - you will be able to select it from tablet
12. type adb kill-server and disconnect tablet, install new recovery and from that one you will be able to select external or internal sdcard
Notes:
I don't know why but I was able to send only small file from CWM-adb connection, it kept disconnecting quite quickly that is why I recommend sending Rogue XM Recovery instead of whole new ROM.
Other thing - it may depend on what windows system you have - I'm on Win 7 x64 (don't remember how it worked on other versions) and I can paste onto cmd (black) window without problems from right click menu. If you won't be able to paste there or you'll get some rubbish, try to right click on top bar and select "Edit" and then "Paste".
Ok, that's all. Hope it will work.

thanks for all inputs. i did a full wipe but not as scripts. i wiped manually. i did try to reboot but stuck as eepad screen. will try to re-install asus drivers and uninstall htc ones. hopefully i get it done today. i will update later...

still no luck. device not found. im going to try to install new sdk... i hope it works. ive already removed htc sync and drivers. also re-installed asus sync and updated drivers. on device manager detects on other devices transformer but drivers are not installed.

yahoo! got it working now. i had to enable adb usb Drivers for Nvidia Tegra based Android Tablets and re-install SDK download android usb and learn What Is ADB And How To Install It With Android SDK.
finally got my tablet working again and my first thing to do is have a copy of a ROM and CWM in both storages!
thanks alot for the input and for helping!
thanks Kraliz

monespeso said:
yahoo! got it working now. i had to enable adb usb Drivers for Nvidia Tegra based Android Tablets and re-install SDK download android usb and learn What Is ADB And How To Install It With Android SDK.
finally got my tablet working again and my first thing to do is have a copy of a ROM and CWM in both storages!
thanks alot for the input and for helping!
thanks Kraliz
Click to expand...
Click to collapse
Could you tell me how to do that? Because I have the exact same problem.

Pantech Element TWRP Recovery and Stock Rooted Roms

This is TWRP recovery and Stock rooted roms for the ICS firmware on the tablet.
These will only work if you currently have ICS running on your tablet. If you still have honeycomb then do the upgrade first.
Nothing was added or removed from the stock roms besides root and busybox.
Only bug with TWRP is that you can't mount sdcard in recovery. Just use adb push.
Instructions for installing TWRP Recovery:
1. Ensure you have Android SDK installed with adb and fastboot working
2. Download both the twrprecovery.img and twrprecovery.zip from here
3. Copy twrprecovery.zip to external sdcard
4. Reboot tablet to bootloader by issuing the command "adb reboot bootloader"
5. Then "fastboot boot twrprecovery.img"
6. When in recovery choose install then browse to /sdcard and choose twrprecovery.zip and flash that zip
7. Now TWRP is installed permanently.
Thanks:
attn1 - gave me some help since I am new to pantech devices
Dees_troy - for TWRP code obviously
Tassadar - for his rotation code for twrp. Without this it wouldn't have been possible

Disclaimer: Flash this ROM at your own risk. I am not responsible for what you do on your device. I left this stock to provide a base for anybody that wants to use it. Mod this rom how you want. Just please remember to give credit where credit is due.
This is a pure stock rooted rom. It has items like busybox, init.d support and so forth. No apps were added or removed. Both Odexed and Deodexed versions below.
Downloads

just in case i need another

Once I reboot into fastboot, I am getting 'cannot load twrprecovery.img': no error
Any ideas? I even created a directory named tools in the adb directory on my computer and moved twrprecovery.img into it.
(Thought that might help).
Where is the twrprecovery.img file supposed to reside? (On the computer, or on the phone?)

mavblues said:
Once I reboot into fastboot, I am getting 'cannot load twrprecovery.img': no error
Any ideas? I even created a directory named tools in the adb directory on my computer and moved twrprecovery.img into it.
(Thought that might help).
Where is the twrprecovery.img file supposed to reside? (On the computer, or on the phone?)
Click to expand...
Click to collapse
On the computer. your command prompt should be at wherever you put twrprecovery.img file is. So for example you put twrprecovery.img at the root of c:, your command prompt should read c:/ .....
Sent from my M7 using xda premium

Tada!!!
Thanks, you rock!
---------- Post added at 01:39 PM ---------- Previous post was at 01:10 PM ----------
OK, stupid question:
How do you reboot to TWRP? It loaded the first time, and I did a backup.
After reboot, I can only seem to get into the standard recovery.
What is the button combination to get to TWRP?
Also, will we be able to use goo manager to update TWRP as new versions come out, or is this a custom version?
TIA

mavblues said:
Tada!!!
Thanks, you rock!
---------- Post added at 01:39 PM ---------- Previous post was at 01:10 PM ----------
OK, stupid question:
How do you reboot to TWRP? It loaded the first time, and I did a backup.
After reboot, I can only seem to get into the standard recovery.
What is the button combination to get to TWRP?
Also, will we be able to use goo manager to update TWRP as new versions come out, or is this a custom version?
TIA
Click to expand...
Click to collapse
Read the instructions. You HAVE to flash the zip I provided for recovery to be installed permanently.
This recovery required some special code for screen rotation. Dees_troy is working on getting it added to mainline. So right now you can't get it through goo manager. But I work closely with Dees to make sure all my builds are officially supported. I will post here when it becomes available through there
Sent from my M7 using xda premium

jmztaylor said:
Read the instructions. You HAVE to flash the zip I provided for recovery to be installed permanently.
This recovery required some special code for screen rotation. Dees_troy is working on getting it added to mainline. So right now you can't get it through goo manager. But I work closely with Dees to make sure all my builds are officially supported. I will post here when it becomes available through there
Sent from my M7 using xda premium
Click to expand...
Click to collapse
Got it - working great!

I'm stuck on fastboot mode. <waiting on device>
I tried unplug/replug USB to different connector, and it's still on <waiting for device>
I even tried to install driver manually from each files pantech folder and still no response
TWRP is on same folder and also set on environment variable
I have done adb devices and it detects as PORORO03111xxxxxxxxxxx
Any suggestion guys?

dagadu said:
I'm stuck on fastboot mode. <waiting on device>
I tried unplug/replug USB to different connector, and it's still on <waiting for device>
I even tried to install driver manually from each files pantech folder and still no response
TWRP is on same folder and also set on environment variable
I have done adb devices and it detects as PORORO03111xxxxxxxxxxx
Any suggestion guys?
Click to expand...
Click to collapse
Waiting on device in fastboot means drivers aren't installed or the wrong ones are. Download the software upgrade app from pantech site then install. Browse to the install directory and run the installer for the drivers. But before that uninstall whatever drivers you have installed currently. I'm mobile or else I would link you directly
Sent from my M7 using xda premium

dagadu said:
I'm stuck on fastboot mode. <waiting on device>
I tried unplug/replug USB to different connector, and it's still on <waiting for device>
I even tried to install driver manually from each files pantech folder and still no response
TWRP is on same folder and also set on environment variable
I have done adb devices and it detects as PORORO03111xxxxxxxxxxx
Any suggestion guys?
Click to expand...
Click to collapse
Did you check "USB debugging" on the tablet?
Also, I had to set USB connection on the tablet to the last choice "PC Data Mode".
Hope it helps.

jmztaylor said:
Waiting on device in fastboot means drivers aren't installed or the wrong ones are. Download the software upgrade app from pantech site then install. Browse to the install directory and run the installer for the drivers. But before that uninstall whatever drivers you have installed currently. I'm mobile or else I would link you directly
Sent from my M7 using xda premium
Click to expand...
Click to collapse
Is this what you're referring to? I download it from Pantech website.
htt p://c7240 62.r62 .cf2.rackcdn. com/PantechPCSuite_1.1.1.3437. exe
When do I need to install the driver? During fastboot mode, or normal mode?
I also notice that when I change the usb mode to MTP, it detects missing driver as well.
During normal mode it detects 2 pantech drivers in order to connect to pc suite.
Oya, when you guys do adb devices, does your device detect POROROxxxxxxx as well or only numbers?
I wonder this has anything to do with it, because I was trying to root with honeycomb version earlier and my pantech is ICS 4.0.4

dagadu said:
Is this what you're referring to? I download it from Pantech website.
htt p://c7240 62.r62 .cf2.rackcdn. com/PantechPCSuite_1.1.1.3437. exe
When do I need to install the driver? During fastboot mode, or normal mode?
I also notice that when I change the usb mode to MTP, it detects missing driver as well.
During normal mode it detects 2 pantech drivers in order to connect to pc suite.
Oya, when you guys do adb devices, does your device detect POROROxxxxxxx as well or only numbers?
I wonder this has anything to do with it, because I was trying to root with honeycomb version earlier and my pantech is ICS 4.0.4
Click to expand...
Click to collapse
Anytime when the tablet is not plugged in. This will make the computer automatically install anything needed for the tablet and you won't have issues with fastboot or adb anymore
Sent from my M7 using xda premium

jmztaylor said:
Instructions for installing TWRP Recovery:
1. Ensure you have Android SDK installed with adb and fastboot working
2. Download both the twrprecovery.img and twrprecovery.zip from here
3. Copy twrprecovery.zip to external sdcard
4. Reboot tablet to bootloader by issuing the command "adb reboot bootloader"
5. Then "fastboot boot twrprecovery.img"
6. When in recovery choose install then browse to /sdcard and choose twrprecovery.zip and flash that zip
7. Now TWRP is installed permanently.
Click to expand...
Click to collapse
I did not understand anything of this manual...
I took the CWM file for Pantech A810S and replaced it recovery to ours, flashed(connect working Element to PC and start cwm.but), everything works.

1806 said:
I did not understand anything of this manual...
I took the CWM file for Pantech A810S and replaced it recovery to ours, flashed(connect working Element to PC and start cwm.but), everything works.
Click to expand...
Click to collapse
Actually it's similar steps; however, yours is more like 1-click root
Anyway, I tried everything all above, but it didn't solve my problem, then I found the solution from other website
I just want to share in case others are stuck in fastboot mode like me:
1. When your tablet screen is on fastboot mode (white), go to device manager on your pc
2. Right click on Android > Update driver
3. Click on Browse driver
4. Choose Let me pick manually from my pc list
5. Choose Android phone and pick the first list there. It should be "Android ADB..."
6. Install and fastboot continued
if you can't find Android ADB from your pc list, then you should unplug device then install PC Suite.
here's the old tuts: youtube com/watch?v=UHRonVzBMsI
Hopefully it helps others and thank you very much for all your help!

Delete!

Finally! and a question
Finally a recovery for the element! Rhanks to the OP. Now I am less afraid to tinker with my tablet.
Question: The most important thing right now that I'd like to do is move the folder /data/data from the internal storage, to the internal SD card. This is stopping me from using Google Magazines and Google music, since their data is being stored there, and it shares space with actual applications. 1GB is not that much space for APPS, Dalvik Cache and APPs' data when you add magazines, and when google starts caching Music and Chrome data there. I currently only have 300MB left before I install Music and magazines. And that is AFTER I've used app2sd on all apps that can be moved. How do I do this?
I have tried simply creating a Link using "ln - s /mnt/sdcard/data /data/data" once I copied/moved the contents of the directory, which sort of works initially, but it will not work after a reboot. It actually stops my tablet from booting. (again, thanks to the OP for the recovery).
right now, I am just doing an "ln" on the specific folder inside the /data/data folder, but it acts weird when I use Titanium Backup to restore data
-> Android noob <-

Installing TWRP went smooth as silk. With twrprecovery.zip on you micro sdcard and Element connected with usb cable and USB debuuging checked 1.Just copy twrprecovery.img into your sdk folder/ platform-tools and also have a copy of cmd.exe from windows in the platform-tools folder. 2. Start cmd.exe and type or copy & paste command reboot bootloader 3. Then on white screen(fastboot) type or paste command fastboot boot twrprecovery.img 4. When you boot into TWRP install twrprecovery.zip.....As you rebbot system TWRP should ask if you want Supersu installed and swipe to install. Once rebooted install supersu from the Play store and open Supersu to update SU file all should be good
Thanks for the info and files. I know I'm a little late on this Tablet but picked it up cheap and with ATT 4G it goes along with my devices. The orginial owner hadn't even installed ICS and she wasn't even aware of an update. She now owns an Apple :laugh::laugh:device LOL

I just picked one up for $90 bucks off ebay. It was on slickdeals .net
Figured i'd use it around the pool and save my phone!
No one has deved a JB rom though Could KK even be possible?

marcustaz said:
I just picked one up for $90 bucks off ebay. It was on slickdeals .net
Figured i'd use it around the pool and save my phone!
No one has deved a JB rom though Could KK even be possible?
Click to expand...
Click to collapse
Yes good deal, got mine last month on Craigslist for $70.00 and works really well. The owner hadn't even updated to 4.0 or even knew how. It is a good tablet and have rooted it. I think its development is pretty well dead as not many sold. Only thing bad about it is the Element reads 2nd partition instead of 1st as most android devices do, so harder to use link2sd or folder mount as they both use 2nd partition.
Sent from my PantechP4100 using XDA Premium 4 mobile app

team eos rom not booting

I flashed eos-tf101-20130704-121, and it does not boot. I've tried several times, and I made sure to wipe the system, cache, etc. why is it not working?
also, how do I get into download mode?

That's an ancient build of a dead ROM project
KatKiss is the new EOS
http://forum.xda-developers.com/showthread.php?t=2362764

Unfortunately, I don't have a spare sd card, and I can't seem to get download mode to work, so I was hoping I could install the ROM update, and install KatKiss. I am working on getting KatKiss though!

If yo boot to recovery you can use ADB to push files to your tablets internal memory to flash.

frederuco said:
If yo boot to recovery you can use ADB to push files to your tablets internal memory to flash.
Click to expand...
Click to collapse
sorry - how do I do this? never used adb before.

sniper8752 said:
I flashed eos-tf101-20130704-121, and it does not boot. I've tried several times, and I made sure to wipe the system, cache, etc. why is it not working?
also, how do I get into download mode?
Click to expand...
Click to collapse
you have to wipe cache and dalvik after flashing the rom

KronicSkillz said:
you have to wipe cache and dalvik after flashing the rom
Click to expand...
Click to collapse
no luck.

Im going to guess that you have CWM Recovery installed ?
If yes, that is likely the reason for it not booting
You'll need to put the TF into APX Mode (Volume up & Power while connected to the PC > USB)
Nothing will appear on the TF screen, but the PC should recognise it
Follow the instructions here to get TWRP Recovery installed instead
http://forum.xda-developers.com/showthread.php?t=1688012

sniper8752 said:
sorry - how do I do this? never used adb before.
Click to expand...
Click to collapse
You need adb from the Android SDK. I have a zip of the files you need here: http://db.tt/b9dQ6xzp
Unzip these to c:\adb\
Plug your tablet in using the USB cable. Your computer should detect a new device. Update the driver with the Naked Drivers 0.72 ADB driver found in the Dev forum (I think it is on page 2 of threads). If you are running Win 8, there are some extra steps to allow you to use this driver.
Once your devices shows in the device manager as an ADB device, open a command prompt and type the following:
Code:
c:
cd c:\adb
adb devices
At this point, it will probably restart the daemon and then it should show a recovery device. If it does, you can proceed. If not, check that your cable is good, and that an ADB device is showing in the device manager.
Grab the ROM of choice and any GAPPS and kernel that you want to move over to your device. Put them in the c:\adb folder. They will be referred to a ROM.zip, GAPPS.zip and kernel.zip going forward.
Execute the following:
Code:
adb push ROM.zip /sdcard/
adb push GAPPS.zip /sdcard/
adb push kernel.zip /sdcard/
Note there is a space between the zip and the /sdcard/. If you omit this space it will not work.
After each time the "adb push" is executed, it may take up to 10 minutes to push the file depending on how big it is. Just be patient until it says it was pushed successfully.
Once this is done, you should see these files in the internal memory of your device when in recovery.

thanks! got it to work.

[Q] ADB Push

Installing Cyanmod on N5
When following instructions from wiki
Place the CyanogenMod rom .zip file on the root of the SD card using adb:
Transfer your file(s): adb push YOURROMZIP.zip /sdcard/
Click to expand...
Click to collapse
I get error:device cannot be found.
fastboot device command lists my serial number, adb kill/resume server commands work fine.
Is the wiki missing something?
I have also attempted this step.
On some devices, the zip file can be copied to the device using standard USB Mass Storage or MTP support. Boot the device normally and transfer the file to it.
Click to expand...
Click to collapse
However after following the steps given in the Cyanmod wiki CWM version 6.04 installs the latest nightly and boots to a never ending load screen.
Any help much appreciated,
Cheers.

Are you booted into cwm recovery when using adb?
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit

No the wiki states to boot back into recovery mode once the .img has been moved over to the sdcard so I am in fastboot mode when issuing the push command.
I did try this while in CWM recovery however Windows 7 looses the Android Bootloader Interface drivers and looses the device altogether. I then have the yellow exclamation mark over Android in Device manager.

Did you wipe data, cache and dalvik in cwm before flashing the zip?

chdgzgfbzc said:
No the wiki states to boot back into recovery mode once the .img has been moved over to the sdcard so I am in fastboot mode when issuing the push command.
I did try this while in CWM recovery however Windows 7 looses the Android Bootloader Interface drivers and looses the device altogether. I then have the yellow exclamation mark over Android in Device manager.
Click to expand...
Click to collapse
You can only adb push in recovery or android. Not fastboot. Plus unless you have a custom kernel with insecure adb support, you can't use android either.
Your recovery issue seems you have a windows driver issue.
I had similar issues with cwm. I had to install drivers using mskip's toolkit. I normally would never advocate using a toolkit but for me it was the only way to get cwm recognised in windows
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit

Yeah no doubt its a driver issue, but it is strange the USB drivers provided by google are not sufficient, unless the issue is with CWM.
I can install drivers from device manager whilst in CWM recovery, but I have so far found no source that states what drivers you need.
But yeah all cache etc wiped before install.

chdgzgfbzc said:
Yeah no doubt its a driver issue, but it is strange the USB drivers provided by google are not sufficient, unless the issue is with CWM.
I can install drivers from device manager whilst in CWM recovery, but I have so far found no source that states what drivers you need.
But yeah all cache etc wiped before install.
Click to expand...
Click to collapse
I also had a similar issue where drivers for fastboot worked fine but I couldn't get adb to work. What worked for me where the android naked usb drivers.

jd1639 said:
I also had a similar issue where drivers for fastboot worked fine but I couldn't get adb to work. What worked for me where the android naked usb drivers.
Click to expand...
Click to collapse
Cheers man, will give them a try.

jd1639 said:
I also had a similar issue where drivers for fastboot worked fine but I couldn't get adb to work. What worked for me where the android naked usb drivers.
Click to expand...
Click to collapse
for me too. universal naked driver v.0.73. i did not need to install them beforehand either. i unzipped it on desktop, when got the warning that device can not be found, went to device manager, sure enough yellow icon on nexus 5. update driver, pointed to unzipped folder on desktop, done.

akmsr said:
for me too. universal naked driver v.0.73. i did not need to install them beforehand either. i unzipped it on desktop, when got the warning that device can not be found, went to device manager, sure enough yellow icon on nexus 5. update driver, pointed to unzipped folder on desktop, done.
Click to expand...
Click to collapse
Yip the drivers worked sure enough for issuing commands in recovery.
Now after install and restart cyanogenmod is frozen on the boot screen.
Windows device manager shows Portable Device>Nexus 5 with yellow exclamation mark and "This device cannot start. (Code 10)" under properties.
OH WELL.
using
cm-11-20131229-NIGHTLY-hammerhead

Wiped EVERYTHING by Mistake NEED HELP

Accidentally wiped everything using TWRP and have no OS now. Can't use ADB or fastboot as when I boot to it it says device not found. Any suggestions PLEASE?

Is it a driver issue? You have to get the drivers loaded or you may be stuck. What steps have you taken so far.
I had this happen to me as well on another device but I loaded up drivers and then used adb to push files back over on a N4

playya said:
Is it a driver issue? You have to get the drivers loaded or you may be stuck. What steps have you taken so far.
I had this happen to me as well on another device but I loaded up drivers and then used adb to push files back over on a N4
Click to expand...
Click to collapse
Basically all you can do there is re-install the drivers, cause it seems they're non-existent or incorrect.
-reload the drivers [force them perhaps if on win 7]
-connect to pc with phone in fastboot
-in twrp go to advanced > sideload > start process
-add your rom to your adb folder
open a command window in your adb folder [shift + right click for short] then type adb sideload myfile.zip , and the phone will flash the file, and you can reboot.

Nosferatu1923 said:
Accidentally wiped everything using TWRP and have no OS now. Can't use ADB or fastboot as when I boot to it it says device not found. Any suggestions PLEASE?
Click to expand...
Click to collapse
teh roxxorz said:
Basically all you can do there is re-install the drivers, cause it seems they're non-existent or incorrect.
-reload the drivers [force them perhaps if on win 7]
-connect to pc with phone in fastboot
-in twrp go to advanced > sideload > start process
-add your rom to your adb folder
open a command window in your adb folder [shift + right click for short] then type adb sideload myfile.zip , and the phone will flash the file, and you can reboot.
Click to expand...
Click to collapse
I believe above post was meant for you OP
Sent from my A0001 using Tapatalk