Database Info

Trouble getting adb to work

Sorry about the uninspiring title, but after an afternoon of this I'm uninspired. All I wanted to do was root this Xoom so I could take some screenshots..
I can get the tablet to stage where it says
--> fastboot
starting fastboot protocol support.
at which time I assume I can start adb. I've tried the USB drivers from the PDAnet package, but when I plug in the Xoom I get a desktop notification saying 'HTC Exit -1' (sorry, that may not be the exact wording, but the same effect).
in that 'fastboot' state, adb devices tells me there aren't any devices connected
the Xoom show up OK when booted into Android, Windows (7, 64 bit) sees it as a drive, and Device Manager sees an MZ604. adb still doesn't see anything
I started off by using the minimum set of utilities (adb, fastboot and their dlls) and then installed the SDK and used its tools (yeah, I've pathed everything properly, I was writing DOS batch files in 1985... and now am a grumpy old man )
The Xoom is Australian WiFi only, runs Honeycomb 3.2.2, hasn't been rooted (I'm trying to do that)
speaking of old, though, the fiddly volume rockers get that way (and or so ironically are used for screenshots in ICS I believe)
I have a feeling that I don't have the proper USB driver installed, I've uninstalled PDAnet, and the Xoom still shows up in windows, but since I can't get a root prompt on the Xoom have no idea what it's using
Any ideas?
Rob

SD card not found
I may as well get all my woes into the open
When in Recovery Mode, the Xoom won't recognise the SD card, it seems to be trying to mount it on /sdcard
I have some zip files of a rooted Honeycomb image, and was going to triple cjeck whether flashing a zip file was a good idea or not first, but I don't get that far
I can see the card and contents from Windows while it's mounted in the Xoom
I should be able to use the card from recovery mode, right?
Rob

emueyes said:
Sorry about the uninspiring title, but after an afternoon of this I'm uninspired. All I wanted to do was root this Xoom so I could take some screenshots..
I can get the tablet to stage where it says
--> fastboot
starting fastboot protocol support.
at which time I assume I can start adb. I've tried the USB drivers from the PDAnet package, but when I plug in the Xoom I get a desktop notification saying 'HTC Exit -1' (sorry, that may not be the exact wording, but the same effect).
in that 'fastboot' state, adb devices tells me there aren't any devices connected
the Xoom show up OK when booted into Android, Windows (7, 64 bit) sees it as a drive, and Device Manager sees an MZ604. adb still doesn't see anything
I started off by using the minimum set of utilities (adb, fastboot and their dlls) and then installed the SDK and used its tools (yeah, I've pathed everything properly, I was writing DOS batch files in 1985... and now am a grumpy old man )
The Xoom is Australian WiFi only, runs Honeycomb 3.2.2, hasn't been rooted (I'm trying to do that)
speaking of old, though, the fiddly volume rockers get that way (and or so ironically are used for screenshots in ICS I believe)
I have a feeling that I don't have the proper USB driver installed, I've uninstalled PDAnet, and the Xoom still shows up in windows, but since I can't get a root prompt on the Xoom have no idea what it's using
Any ideas?
Rob
Click to expand...
Click to collapse
What USB cable are you using? Try to use your Xoom oem cable. Also, make sure that you try different USB ports, especially the ones tied more directly to the pc motherboard. It's finicky like that. Recheck your drivers. I'm not familiar with that PDAnet source. Motodev is the place to get them from. You may also need the java sdk from oracle.
There are some useful guides on setting up adb/fastboot/rooting in General...you may have to go back a few pages but it will be worth it to make your task easier.
Good luck!
---------- Post added at 10:51 AM ---------- Previous post was at 10:47 AM ----------
emueyes said:
I may as well get all my woes into the open
When in Recovery Mode, the Xoom won't recognise the SD card, it seems to be trying to mount it on /sdcard
I have some zip files of a rooted Honeycomb image, and was going to triple cjeck whether flashing a zip file was a good idea or not first, but I don't get that far
I can see the card and contents from Windows while it's mounted in the Xoom
I should be able to use the card from recovery mode, right?
Rob
Click to expand...
Click to collapse
Which recovery mode are you talking about? Have you unlocked and installed a custom recovery, as in a ClockworkMod-based recovery? If so, which one? They have some different behaviors. If it is stock recovery, I don't think it sees the external sdcard at all.

Also make sure usb debugging option is enabled. And flash another recovery image.
You don't really need to root. Just unlock the bootloader. Push the recovery image. Reboot to recovery. And flash a pre rooted rom from team EOS.
Sent from my MZ601 using Tapatalk 2

Back to stock

I rooted, and loaded cm9 rom. I prefer stock rom but when I restored my backup there was no wifi (apparently a common issue). Anyway, I am looking for a way to get back to stock rom. I downloaded firmware from Asus but dont know if that is what I need or what to do with it. I am using the twrp recovery
Thanks for any help

All you have to do is download the full Asus ZIP from my thread and flash in CMW and it will restore your fully stock ROM without recovery
http://forum.xda-developers.com/showthread.php?t=1680570

ok thanks now to figure out how to get cwm into my tablet-- right now trying to install sdk

i installed something called eclipse.. I plug in tablet and get to fastboot mode then-- nothing happens- anyone know how one "flashes". Obviously techno noob here

this worked
Terminal Emulator Method
Install Android Terminal Emulator on your tablet.
Download the ClockworkMod Recovery image file directly to your tablet, preferably in the root of the /sdcard directory. Take note of where the file is saved. Rename the file to cwm-touch.blob.
Launch Android Terminal Emulator on your tablet.
Enter the commands below. If you did not save/move/copy the image file to the /sdcard directory, you need to replace /sdcardin the second command below with the correct directory where you saved the recovery image file to.
su
dd if=/sdcard/cwm-touch.blob of=/dev/block/mmcblk0p4
Reboot your tablet. The blob file will be automatically installed as your tablet reboots.

voodoo_dr said:
i installed something called eclipse.. I plug in tablet and get to fastboot mode then-- nothing happens- anyone know how one "flashes". Obviously techno noob here
Click to expand...
Click to collapse
You can uninstall Eclipse. It has nothing to do with Android or flashing anything. It's an Integrated Development Environment, which is kind of like a word processor for programmers. The only relation it has to Android is that it supports the Java programming language, so a lot of Android developers use it. If you're not going to be writing apps or messing with Android source code, it's probably best if you uninstall Eclipse, just because you won't use it, and it's taking up storage space.
Also, what were you expecting to happen when you put the tablet in fastboot mode? It just opens up a serial connection with a host (in this case, your computer) and allows the host to access the tablet via fastboot (sounds confusing, I know; it's not particularly fast, and doesn't have much to do with booting anything; it's like ADB but for low-level [hardware] flashing) and run commands. The tablet itself does nothing except display the message that it's in fastboot mode. Once the tablet says that, you run fastboot on the computer.

thanks for the reply. Now I have a brick---tried to install stock rom and hangs on asus with the wheel going round and round. It deleted my cwm so now no recovery on tablet. When I go into fastboot, it doesnt seem to recognize my tablet adb devices--nothing comes up

In my device manager I see no adp drivers- the only driver which keeps installing when I plug in the tablet and go to fastmode is the asus bootloader interface so I cant do anything with the tablet--- no recognition of device with adb devices command Help please

If you're in fastboot, ADB won't recognize the tablet. You need to use the fastboot commands with fastboot.
What to do:
-download the CWM blob on your computer
-put the CWM blob in the directory on your computer with the fastboot program
-boot the tablet into fastboot, and flash CWM
-boot into CWM, and restore the nandroid backup you should have made.
Alternately, if you didn't make a nandroid backup, you can boot into recovery, push the Asus stock ROM to /sdcard on your tablet via ADB (I'm assuming ADB works in the stock recovery), then reboot into recovery, and it should flash the update automatically. This will erase ALL your data, including /sdcard.

is cwm blob recovery.img?

I'm not sure if flashing .img files works with this tablet, but you could try. If it doesn't work, go to the place you got the recovery (as long as it's not from ROM Manager, and you're positive it's not the TF201's recovery), and there should be a file that ends in .blob. That's the one you need.

then I just place it in the same directory and click on fastboot? or is there more to it? seems to be having trouble with drivers mtp driver not installing???

I don't use Windows, so I don't know about the drivers. There's a thread in the development section with all the Windows drivers you need, though.
You put the blob in the directory where fastboot is. You open the command line (open Run, and type "cmd" [no quotes]) and run the fastboot command from there.

got it thanks cwm is back

TF101G: only recovery acces HELP!

Hi all!
Yesterday I want to change my old ROM for a newer one. I downloaded the new ROM and I copied it to my micro SD. From CWM recovery I wiped the table and also I did the formats (System,data,etc) and when I tried to flash the ROM i saw that there was no "Install from external SD card" option only "from internal"....but there's no zip in there. Now my tablet don't pass ASUS logo and I' dont have (or I don't know how I can do it) option to acces to the internal memory to copy there the new ROM.
CAn please some one hel me?
Thanks a lot!

joanmv said:
Hi all!
Yesterday I want to change my old ROM for a newer one. I downloaded the new ROM and I copied it to my micro SD. From CWM recovery I wiped the table and also I did the formats (System,data,etc) and when I tried to flash the ROM i saw that there was no "Install from external SD card" option only "from internal"....but there's no zip in there. Now my tablet don't pass ASUS logo and I' dont have (or I don't know how I can do it) option to acces to the internal memory to copy there the new ROM.
CAn please some one hel me?
Thanks a lot!
Click to expand...
Click to collapse
wrong thread, this thread is NOT for posting questions. post a question you want to ask in the Q&A thread
Anyway, use EasyFlasher-0.8.3b tool to flash the stock ROM and use the latest CWM recovery for tf101. i found that the latest version (v6.0.2.1) has an option to choose whether to install it from SD card and also internal memory

TheMrcool212 said:
wrong thread, this thread is NOT for posting questions. post a question you want to ask in the Q&A thread
Anyway, use EasyFlasher-0.8.3b tool to flash the stock ROM and use the latest CWM recovery for tf101. i found that the latest version (v6.0.2.1) has an option to choose whether to install it from SD card and also internal memory
Click to expand...
Click to collapse
I'm sorry for posting in the wrong thread. Could you please move it to the correct forum?
Thank you for the answer. I've read that easyflasher was not compatible with TF101 G but may be I was a older version. I'll try it and I'll post if it works.
Thank you again!
Sent from my GT-N7100 using Tapatalk 2

Thread moved,
Remember the development section is for development threads only, if you have a question this belongs in the Q&A section

joanmv said:
I'm sorry for posting in the wrong thread. Could you please move it to the correct forum?
Thank you for the answer. I've read that easyflasher was not compatible with TF101 G but may be I was a older version. I'll try it and I'll post if it works.
Thank you again!
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Correct, the TF101G has a different SBK so you are out of luck with EasyFlasher or anything that uses APX mode.
You have 2 options:
1 - Push the ROM you want to flash to the internal storage.
2 - Install a new recovery that supports external storage like TWRP or the Rayman's 6.X version in the development section.
Both of these involve using ADB to push/install the files when the tablet is in recovery. You will need a computer, your tablet and the USB charging cord.
On your PC, download and unzip the Naked Drivers.
Plug your tablet into the PC. It should find new hardware. Go to the Device Manager (through Control Panel - System) and look for your device. It may show up as an Android or Asus ADB device, or unknown hardware. Right click on it and update driver. Pick the driver (browse to it, do not let it scan) where you put the naked drivers. This should install a good working ADB driver.
Once that is complete, you will need to get a copy of ADB. It is in the Android SDK, but if you only need ADB, you can get it from this thread: http://forum.xda-developers.com/showthread.php?t=1955627 It also has some help on getting ADB working.
Once you get ADB downloaded, put the exe in a folder named c:\adb\.
Next, open a command prompt and type cd c:\adb followed by adb devices
At this point, it should restart adb (it may error out and say the daemon failed to start, just execute the adb devices command again) and show a recovery device connected.
Method 1
Now, you need the ROM you want to flash. Download this and put it in the c:\adb folder. I am going to call it ROM.zip.
From the command prompt type adb push ROM.zip /sdcard/
It will then push the file ROM.zip to your tablet.
From this point, you should be able to go to your recovery on your tablet and Install ZIP from SDCard and then it should show the file you just pushed to your /sdcard/.​
Method 2
Figure out what recovery you want to flash and you will need the blob file. If the recovery has a zip version that flashes via recovery, you can use method 1 to push it to your tablet. If the recovery only has a blob version (like TWRP) you will need to install it using dd.
First, download the recovery. I am going to save it as c:\adb\RECOVERY.blob
In a command prompt, type adb push RECOVERY.blob /sdcard/
Once complete, type adb shell and you will get a [email protected]# prompt.
Type dd if=/sdcard/RECOVERY.blob of=/dev/block/mmcblk0p4
Once that completes type adb reboot
The tablet will now reboot. Do not try to enter recovery immediately, be sure to let the progress indicator complete on the Eee Pad screen. This is where it actually flashes the new recovery.
Once that completes, hold VOL DOWN and POWER for 12-15 seconds, then release and tap VOL UP when you see the white text. This will boot you into (hopefully) your new recovery.
​

Pantech Element TWRP Recovery and Stock Rooted Roms

This is TWRP recovery and Stock rooted roms for the ICS firmware on the tablet.
These will only work if you currently have ICS running on your tablet. If you still have honeycomb then do the upgrade first.
Nothing was added or removed from the stock roms besides root and busybox.
Only bug with TWRP is that you can't mount sdcard in recovery. Just use adb push.
Instructions for installing TWRP Recovery:
1. Ensure you have Android SDK installed with adb and fastboot working
2. Download both the twrprecovery.img and twrprecovery.zip from here
3. Copy twrprecovery.zip to external sdcard
4. Reboot tablet to bootloader by issuing the command "adb reboot bootloader"
5. Then "fastboot boot twrprecovery.img"
6. When in recovery choose install then browse to /sdcard and choose twrprecovery.zip and flash that zip
7. Now TWRP is installed permanently.
Thanks:
attn1 - gave me some help since I am new to pantech devices
Dees_troy - for TWRP code obviously
Tassadar - for his rotation code for twrp. Without this it wouldn't have been possible

Disclaimer: Flash this ROM at your own risk. I am not responsible for what you do on your device. I left this stock to provide a base for anybody that wants to use it. Mod this rom how you want. Just please remember to give credit where credit is due.
This is a pure stock rooted rom. It has items like busybox, init.d support and so forth. No apps were added or removed. Both Odexed and Deodexed versions below.
Downloads

just in case i need another

Once I reboot into fastboot, I am getting 'cannot load twrprecovery.img': no error
Any ideas? I even created a directory named tools in the adb directory on my computer and moved twrprecovery.img into it.
(Thought that might help).
Where is the twrprecovery.img file supposed to reside? (On the computer, or on the phone?)

mavblues said:
Once I reboot into fastboot, I am getting 'cannot load twrprecovery.img': no error
Any ideas? I even created a directory named tools in the adb directory on my computer and moved twrprecovery.img into it.
(Thought that might help).
Where is the twrprecovery.img file supposed to reside? (On the computer, or on the phone?)
Click to expand...
Click to collapse
On the computer. your command prompt should be at wherever you put twrprecovery.img file is. So for example you put twrprecovery.img at the root of c:, your command prompt should read c:/ .....
Sent from my M7 using xda premium

Tada!!!
Thanks, you rock!
---------- Post added at 01:39 PM ---------- Previous post was at 01:10 PM ----------
OK, stupid question:
How do you reboot to TWRP? It loaded the first time, and I did a backup.
After reboot, I can only seem to get into the standard recovery.
What is the button combination to get to TWRP?
Also, will we be able to use goo manager to update TWRP as new versions come out, or is this a custom version?
TIA

mavblues said:
Tada!!!
Thanks, you rock!
---------- Post added at 01:39 PM ---------- Previous post was at 01:10 PM ----------
OK, stupid question:
How do you reboot to TWRP? It loaded the first time, and I did a backup.
After reboot, I can only seem to get into the standard recovery.
What is the button combination to get to TWRP?
Also, will we be able to use goo manager to update TWRP as new versions come out, or is this a custom version?
TIA
Click to expand...
Click to collapse
Read the instructions. You HAVE to flash the zip I provided for recovery to be installed permanently.
This recovery required some special code for screen rotation. Dees_troy is working on getting it added to mainline. So right now you can't get it through goo manager. But I work closely with Dees to make sure all my builds are officially supported. I will post here when it becomes available through there
Sent from my M7 using xda premium

jmztaylor said:
Read the instructions. You HAVE to flash the zip I provided for recovery to be installed permanently.
This recovery required some special code for screen rotation. Dees_troy is working on getting it added to mainline. So right now you can't get it through goo manager. But I work closely with Dees to make sure all my builds are officially supported. I will post here when it becomes available through there
Sent from my M7 using xda premium
Click to expand...
Click to collapse
Got it - working great!

I'm stuck on fastboot mode. <waiting on device>
I tried unplug/replug USB to different connector, and it's still on <waiting for device>
I even tried to install driver manually from each files pantech folder and still no response
TWRP is on same folder and also set on environment variable
I have done adb devices and it detects as PORORO03111xxxxxxxxxxx
Any suggestion guys?

dagadu said:
I'm stuck on fastboot mode. <waiting on device>
I tried unplug/replug USB to different connector, and it's still on <waiting for device>
I even tried to install driver manually from each files pantech folder and still no response
TWRP is on same folder and also set on environment variable
I have done adb devices and it detects as PORORO03111xxxxxxxxxxx
Any suggestion guys?
Click to expand...
Click to collapse
Waiting on device in fastboot means drivers aren't installed or the wrong ones are. Download the software upgrade app from pantech site then install. Browse to the install directory and run the installer for the drivers. But before that uninstall whatever drivers you have installed currently. I'm mobile or else I would link you directly
Sent from my M7 using xda premium

dagadu said:
I'm stuck on fastboot mode. <waiting on device>
I tried unplug/replug USB to different connector, and it's still on <waiting for device>
I even tried to install driver manually from each files pantech folder and still no response
TWRP is on same folder and also set on environment variable
I have done adb devices and it detects as PORORO03111xxxxxxxxxxx
Any suggestion guys?
Click to expand...
Click to collapse
Did you check "USB debugging" on the tablet?
Also, I had to set USB connection on the tablet to the last choice "PC Data Mode".
Hope it helps.

jmztaylor said:
Waiting on device in fastboot means drivers aren't installed or the wrong ones are. Download the software upgrade app from pantech site then install. Browse to the install directory and run the installer for the drivers. But before that uninstall whatever drivers you have installed currently. I'm mobile or else I would link you directly
Sent from my M7 using xda premium
Click to expand...
Click to collapse
Is this what you're referring to? I download it from Pantech website.
htt p://c7240 62.r62 .cf2.rackcdn. com/PantechPCSuite_1.1.1.3437. exe
When do I need to install the driver? During fastboot mode, or normal mode?
I also notice that when I change the usb mode to MTP, it detects missing driver as well.
During normal mode it detects 2 pantech drivers in order to connect to pc suite.
Oya, when you guys do adb devices, does your device detect POROROxxxxxxx as well or only numbers?
I wonder this has anything to do with it, because I was trying to root with honeycomb version earlier and my pantech is ICS 4.0.4

dagadu said:
Is this what you're referring to? I download it from Pantech website.
htt p://c7240 62.r62 .cf2.rackcdn. com/PantechPCSuite_1.1.1.3437. exe
When do I need to install the driver? During fastboot mode, or normal mode?
I also notice that when I change the usb mode to MTP, it detects missing driver as well.
During normal mode it detects 2 pantech drivers in order to connect to pc suite.
Oya, when you guys do adb devices, does your device detect POROROxxxxxxx as well or only numbers?
I wonder this has anything to do with it, because I was trying to root with honeycomb version earlier and my pantech is ICS 4.0.4
Click to expand...
Click to collapse
Anytime when the tablet is not plugged in. This will make the computer automatically install anything needed for the tablet and you won't have issues with fastboot or adb anymore
Sent from my M7 using xda premium

jmztaylor said:
Instructions for installing TWRP Recovery:
1. Ensure you have Android SDK installed with adb and fastboot working
2. Download both the twrprecovery.img and twrprecovery.zip from here
3. Copy twrprecovery.zip to external sdcard
4. Reboot tablet to bootloader by issuing the command "adb reboot bootloader"
5. Then "fastboot boot twrprecovery.img"
6. When in recovery choose install then browse to /sdcard and choose twrprecovery.zip and flash that zip
7. Now TWRP is installed permanently.
Click to expand...
Click to collapse
I did not understand anything of this manual...
I took the CWM file for Pantech A810S and replaced it recovery to ours, flashed(connect working Element to PC and start cwm.but), everything works.

1806 said:
I did not understand anything of this manual...
I took the CWM file for Pantech A810S and replaced it recovery to ours, flashed(connect working Element to PC and start cwm.but), everything works.
Click to expand...
Click to collapse
Actually it's similar steps; however, yours is more like 1-click root
Anyway, I tried everything all above, but it didn't solve my problem, then I found the solution from other website
I just want to share in case others are stuck in fastboot mode like me:
1. When your tablet screen is on fastboot mode (white), go to device manager on your pc
2. Right click on Android > Update driver
3. Click on Browse driver
4. Choose Let me pick manually from my pc list
5. Choose Android phone and pick the first list there. It should be "Android ADB..."
6. Install and fastboot continued
if you can't find Android ADB from your pc list, then you should unplug device then install PC Suite.
here's the old tuts: youtube com/watch?v=UHRonVzBMsI
Hopefully it helps others and thank you very much for all your help!

Delete!

Finally! and a question
Finally a recovery for the element! Rhanks to the OP. Now I am less afraid to tinker with my tablet.
Question: The most important thing right now that I'd like to do is move the folder /data/data from the internal storage, to the internal SD card. This is stopping me from using Google Magazines and Google music, since their data is being stored there, and it shares space with actual applications. 1GB is not that much space for APPS, Dalvik Cache and APPs' data when you add magazines, and when google starts caching Music and Chrome data there. I currently only have 300MB left before I install Music and magazines. And that is AFTER I've used app2sd on all apps that can be moved. How do I do this?
I have tried simply creating a Link using "ln - s /mnt/sdcard/data /data/data" once I copied/moved the contents of the directory, which sort of works initially, but it will not work after a reboot. It actually stops my tablet from booting. (again, thanks to the OP for the recovery).
right now, I am just doing an "ln" on the specific folder inside the /data/data folder, but it acts weird when I use Titanium Backup to restore data
-> Android noob <-

Installing TWRP went smooth as silk. With twrprecovery.zip on you micro sdcard and Element connected with usb cable and USB debuuging checked 1.Just copy twrprecovery.img into your sdk folder/ platform-tools and also have a copy of cmd.exe from windows in the platform-tools folder. 2. Start cmd.exe and type or copy & paste command reboot bootloader 3. Then on white screen(fastboot) type or paste command fastboot boot twrprecovery.img 4. When you boot into TWRP install twrprecovery.zip.....As you rebbot system TWRP should ask if you want Supersu installed and swipe to install. Once rebooted install supersu from the Play store and open Supersu to update SU file all should be good
Thanks for the info and files. I know I'm a little late on this Tablet but picked it up cheap and with ATT 4G it goes along with my devices. The orginial owner hadn't even installed ICS and she wasn't even aware of an update. She now owns an Apple :laugh::laugh:device LOL

I just picked one up for $90 bucks off ebay. It was on slickdeals .net
Figured i'd use it around the pool and save my phone!
No one has deved a JB rom though Could KK even be possible?

marcustaz said:
I just picked one up for $90 bucks off ebay. It was on slickdeals .net
Figured i'd use it around the pool and save my phone!
No one has deved a JB rom though Could KK even be possible?
Click to expand...
Click to collapse
Yes good deal, got mine last month on Craigslist for $70.00 and works really well. The owner hadn't even updated to 4.0 or even knew how. It is a good tablet and have rooted it. I think its development is pretty well dead as not many sold. Only thing bad about it is the Element reads 2nd partition instead of 1st as most android devices do, so harder to use link2sd or folder mount as they both use 2nd partition.
Sent from my PantechP4100 using XDA Premium 4 mobile app

[Q] Have TWRP No OS no SU can't install os

Hey everyone. Long time lurker, first time poster, and always grateful.
Okay, so I took a good look at some related threads. They all seem to have been resolved by using tools specific to their particular device. I have not had luck following their lines. So, here's what's up with me:
Asus Transformer Tf700 US edition
Had Cyanogen Mod. Wanted to sell my tablet, so I decided to wipe and go back to factory. Unfortunately, while fooling around in TWRP, I managed to putz it up and wipe the system and data. So no more OS, and apparently no more super user (whoops), although I may be wrong about that.
I can reboot the device into TWRP, but I can't mount the microsd card. When I plug my microsd card into my device, I just get an error that says cannot mount external sd card. So, since that isn't working, I've tried to sideload via adb.
I have the SDK but can't run ADB sideload because ADB on my computer does not recognize my device. I have tried to install updated drivers, though the drivers that I did find, when I point windows to the folder with them, it doesn't see a driver. SO maybe I'm doing that wrong.
I'm completely at my wit's end here. Can someone give me a little help?
Thanks everyone for your help in advance.

Specifics please????
CM, TWRP, Windows, drivers: What version?
You may want to try this, it installs the drivers for you: http://forum.xda-developers.com/showthread.php?t=2588979

berndblb said:
Specifics please????
CM, TWRP, Windows, drivers: What version?
You may want to try this, it installs the drivers for you: http://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
Hey there, thanks so much for replying!
I'm using TWRP v2.6.0.0.
Windows 7 x64 SP1
The CM version that I had, I actually don't recall now. I had flashed it back to stock though, before this, by using TWRP recovery. I noticed after that that I had not flashed my saved files properly. That's when I pooched it, hah.
I removed the existing USB drivers via device manager, restarted, used the installer that you linked to, restarted, and plugged in my device. It said installing drivers, and then failed to install drivers. ADB does not recognize a connected device. Merp.

I still haven't had any luck. Does anyone have any ideas?

You have to get the Windows drivers working to get ADB and fastboot access to your tablet and that can be tricky. Any chance you can get your hands on a Linux machine?
If the ADB tool I linked to didn't work (and I don't understand why - I used it on Win7 32 bit without a hitch) try to install the Google Universal Naked Drivers (google the term and should find them easily).
Actually - do you have the Asus device drivers installed? What happens if you connect the USB cable? Does Windows recognize the device at all? If not try to download Asus Sync, install it and try again. Once Windows recognizes the tablet as a MTP device, run the adb tool again and then try "adb devices" when you are booted into Android and "fastboot devices" when the tablet is in fastboot mode.

http://forum.xda-developers.com/showthread.php?t=2646279

berndblb said:
You have to get the Windows drivers working to get ADB and fastboot access to your tablet and that can be tricky. Any chance you can get your hands on a Linux machine?
If the ADB tool I linked to didn't work (and I don't understand why - I used it on Win7 32 bit without a hitch) try to install the Google Universal Naked Drivers (google the term and should find them easily).
Actually - do you have the Asus device drivers installed? What happens if you connect the USB cable? Does Windows recognize the device at all? If not try to download Asus Sync, install it and try again. Once Windows recognizes the tablet as a MTP device, run the adb tool again and then try "adb devices" when you are booted into Android and "fastboot devices" when the tablet is in fastboot mode.
Click to expand...
Click to collapse
Hey, thanks for the reply. When I plug in the device, it tries to install drivers and almost immediately fails. It then shows in the device manager as shown in the attached file. When I right click, select update driver, and point it to the folder with the google naked drivers (or the asus drivers), it says that "Windows cannot find drivers for this device." This seems strange to me. It has no idea what the transformer is when it is plugged in. Is there a different manual method of installing drivers, or cuing windows to recognize that these are the correct drivers?
I had Asus Sync installed, and that didn't seem to do anything for me. Windows would not do anything differently than it had already done. Grrr. This hurts.
sbdags said:
http://forum.xda-developers.com/show....php?t=2646279
Click to expand...
Click to collapse
This method looks promising, but it requires one to go into Android and turn on USB debugging mode. Problem is: I have no OS to log in to in order to do so

Whoops, forgot screen shot

Jeez - this is frustrating. I'm running out of ideas how to get Windows to work...
You are running Windows with administrator rights - yes?
Consider installing Linux as a dual boot on your Windows machine. I did that just to get rid of these ADB/fastboot driver problems....

berndblb said:
Jeez - this is frustrating. I'm running out of ideas how to get Windows to work...
You are running Windows with administrator rights - yes?
Consider installing Linux as a dual boot on your Windows machine. I did that just to get rid of these ADB/fastboot driver problems....
Click to expand...
Click to collapse
I'm running shy on space on my OS SSD, but would it potentially work running off of a boot disk? I have Fedora lying around here somewhere. Would the process be especially different? I have so very little experience working in Linux.
Also, I wonder if this is important. When I tell TWRP to reboot the machine, it informs me that super user isn't installed, and offers to root my device for me, but when I select that option, the screen just goes blank and it appears to hang, and I have to reboot it with the volume and power keys.

hardshank said:
I'm running shy on space on my OS SSD, but would it potentially work running off of a boot disk? I have Fedora lying around here somewhere. Would the process be especially different? I have so very little experience working in Linux.
Also, I wonder if this is important. When I tell TWRP to reboot the machine, it informs me that super user isn't installed, and offers to root my device for me, but when I select that option, the screen just goes blank and it appears to hang, and I have to reboot it with the volume and power keys.
Click to expand...
Click to collapse
I have no idea if you can run adb or fastboot if you boot Linux off a boot disc - but what the heck? Why not try it at this point?
I do not understand your driver problems at all. I helped someone today with a lot of the same problems: The tablet only booted into recovery, TWRP would not mount the microSD, didn't see any files on the internal... The ADB tool I linked to earlier allowed him to adb reboot to the bootloader - the rest was a breeze... Something in your Windows setup is just effed up... Sorry - wish I had that magic wand...

berndblb said:
I have no idea if you can run adb or fastboot if you boot Linux off a boot disc - but what the heck? Why not try it at this point?
Click to expand...
Click to collapse
Sure, if you have compatible adb and fastboot binaries it should work. Linux doesn't care where it was booted from.

_that said:
Sure, if you have compatible adb and fastboot binaries it should work. Linux doesn't care where it was booted from.
Click to expand...
Click to collapse
I had to install the adb and fastboot binaries on my distro. You can't do that on Linux running off a disc - can you? You would have to find a distro that comes with them?

berndblb said:
I had to install the adb and fastboot binaries on my distro. You can't do that on Linux running off a disc - can you? You would have to find a distro that comes with them?
Click to expand...
Click to collapse
On some live distros you can install additional software to a ramdisk. For adb and fastboot, any live distro with 32 bit libraries should have the required libs so that you can just copy/download the binaries and run them.

So here is an interesting development: I am now able to see my micro SD card when it is plugged into my device. Why? I haven't the foggiest. However, I still can't see any of its contents. Curious....

hardshank said:
So here is an interesting development: I am now able to see my micro SD card when it is plugged into my device. Why? I haven't the foggiest. However, I still can't see any of its contents. Curious....
Click to expand...
Click to collapse
Okay. I can't believe this worked, but I'm back in action. Here's how it went down:
- I tried doing a Linux USB drive, but was having difficulties getting it to boot, and my knowledge of Linux is so limited, I basically gave up hope.
- Today, I picked up my tablet (which has remained plugged in for power all of this time), and rebooted it. At the opening screen, which allows me to choose to go into TWRP, boot into (I think) Linux, or wipe data, I had never selected Wipe Data. Why? Because accidentally wiping the wrong partition is what got me in this mess to begin with.
- SO then I think, what the hell. It seems to have actually done something (though I don't know what), so I grab my micro SD with stock Android loaded on it, and pop it in. Voilà! It is recognized (as above).
- For some reason, no contents of card are visible
- Restarted device: card contents visible!
- Selected "Install" in TWRP menu, and selected my stock ROM
So. This has been a weird month. Thank you to EVERYONE who helped out on this. I'll be sure to hit the Thanks buttons!

hardshank said:
Okay. I can't believe this worked, but I'm back in action. Here's how it went down:
- I tried doing a Linux USB drive, but was having difficulties getting it to boot, and my knowledge of Linux is so limited, I basically gave up hope.
- Today, I picked up my tablet (which has remained plugged in for power all of this time), and rebooted it. At the opening screen, which allows me to choose to go into TWRP, boot into (I think) Linux, or wipe data, I had never selected Wipe Data. Why? Because accidentally wiping the wrong partition is what got me in this mess to begin with.
- SO then I think, what the hell. It seems to have actually done something (though I don't know what), so I grab my micro SD with stock Android loaded on it, and pop it in. Voilà! It is recognized (as above).
- For some reason, no contents of card are visible
- Restarted device: card contents visible!
- Selected "Install" in TWRP menu, and selected my stock ROM
So. This has been a weird month. Thank you to EVERYONE who helped out on this. I'll be sure to hit the Thanks buttons!
Click to expand...
Click to collapse
Glad you got it working!
Out of curiosity: Was your tablet booted or completely off until you picked it up today? Did you reboot into the bootloader or did it do that by itself?
Sent from my ASUS Transformer Pad TF700T using Tapatalk