Hi.
My phisical button doesn't work today.
I tried a reset on factory setting without success.
Any ideas?
Inviato dal mio SM-G935F utilizzando Tapatalk
what happens if you go to factory - panel settings:
short press (example home button -> home button should be marked in settings.
does this work?
if not: it seems you have a wrong MCU-Firmware or a broken MCU.
best way: contact your manufacter via mail and ask for the current dmcu.img
flash this trough recovery.
if you have KGL 1.xx (about device info) then i can send you the latest for erisin devices.
danielloe said:
what happens if you go to factory - panel settings:
short press (example home button -> home button should be marked in settings.
does this work?
if not: it seems you have a wrong MCU-Firmware or a broken MCU.
best way: contact your manufacter via mail and ask for the current dmcu.img
flash this trough recovery.
if you have KGL 1.xx (about device info) then i can send you the latest for erisin devices.
Click to expand...
Click to collapse
Thanks.
1 if i go into factory setting and i try to set button It doesn't see them. I push but doesn't see them
2 i contact erisin and they suggest to open and see cable. I tried that and i think is ok. Now they want 40$ to send me a button panel but if is It not the problem?
3 the button don't work in recovery. I try to update mcu from update setting in android, It restars in recovery and flash mcu but i see a message It doesn't flash the dmcu.cfg.
4 my unit is erisin es4700f mtcd kgl for rk3188.
5 without phisical buttons is impossible to work in recovery
Inviato dal mio SM-G935F utilizzando Tapatalk
puuuh, thats difficult.
you have to find a way how to update dmcu.img trough recovery menu. i have no idea how you can handle this without the buttons, sorry.
ahh one more thing:
format sd-card fat32 (with windows)
copy any dupdate.img (like malysk or stock img) AND dmcu.img
insert SD-card to GPS-Slot. (next step, im not 100% sure how the combination was, but try this
Press and hold Reset-Button/Hole for about 30 seconds. the radio should start immediatly with firmware update.
if not, you have to finde the correct key combination for your unit.
https://forum.xda-developers.com/showpost.php?p=68717214&postcount=877
thats the tutorial for updating directly without any keys
Not work
Inviato dal mio SM-G935F utilizzando Tapatalk
Tabs78 said:
Not work
Inviato dal mio SM-G935F utilizzando Tapatalk
Click to expand...
Click to collapse
Hello
I have the same problem with buttons. Did you manage to fix it? Is the recovery mode connected to the usb keypad? (Enter instead of power button)
Jack
I can enter in recovery because i have root and i can restart in this mode. But in recovery i can switch the option because the buttons don't work.
However i sure the problem is not mcu.
It is hardware problem.
Inviato dal mio SM-G935F utilizzando Tapatalk
Related
I Have One Pda Of Mio A501, Its Language Is Spanish But I Want To Change In English. But I Could Not Find The Rom Files For Flash Or Upgrade The ''pda Mio A501''
Sorry For Bad English.
sulmankhan87 said:
I Have One Pda Of Mio A501, Its Language Is Spanish But I Want To Change In English. But I Could Not Find The Rom Files For Flash Or Upgrade The ''pda Mio A501''
Sorry For Bad English.
Click to expand...
Click to collapse
With hardware reset, push call buton and reset in the same time, after that u can change the language.
After hardware reset u have option to change in english or spanish and of course call counter its 0000
BR.
nagold said:
With hardware reset, push call buton and reset in the same time, after that u can change the language.
After hardware reset u have option to change in english or spanish and of course call counter its 0000
BR.
Click to expand...
Click to collapse
Hello,
I don't succeed to get option to change langage with my MIO A501. I press call button and then reset button but my Mio only reset and I don't have any langage option. Can you tell me how to do ?
Thanks a lot
mcarlfr said:
Hello,
I don't succeed to get option to change langage with my MIO A501. I press call button and then reset button but my Mio only reset and I don't have any langage option. Can you tell me how to do ?
Thanks a lot
Click to expand...
Click to collapse
Me too I have an Italian ROM and after hard reset i do not have option to change the language
For all users who have MIO A501:
1. Make sure that the device is turned off.
2. Press the Power button on the top of the device, and then press and hold the Talk button on the front panel until the device vibrates.
3. The device will turn on automatically. The backlight of the keypad will
glow, and the setup wizard will appear on the screen. Follow the
on-screen instructions to complete the setup wizard to change language.
4. Re-establish a partnership with your desktop computer.
5. Re-install the add-on software, if necessary.
BR.
nagold
Mio A501 rocks
Just wanted to ask the MIOA501 owners here if they are also as stunned as I am by the quality of the GPS receiver..... ?
I get a 9 sat fix in my house...where ALL other GPS's don't even fix...
Also, in very bad area's (skyscrapers) most of my GPS'devices fail...whereas the MioA501 get a very solid 8 sat fix...
Another question would be if there is already ANY custom made ROM for the A501
nagold
I DID IT
BUT COULD NOT CHANGE THE LANGUAGE IN ENGLISH.
SULMANKHAN87
Sorry for bad english
Hi, this image is dumped from working device (because i could not find it anywhere) to rescue my dead one.
So here we go:
http://rapidshare.com/files/411823633/Mio_A201_eng.rar
MD5: EF1A2725DB0B63D2EAB594847725D742
http://www.megaupload.com/?d=OR4JKE26
And German version you can find here (made by ansar).
http://forum.xda-developers.com/showthread.php?t=432781
P.S.
might not work on all devices, use for recovery only, YOU MIGHT BRICK YOUR DEVICE, but works fine on mine (german room too)
to enter bootloader menu: (middle button (joystick) down + power button)
also i found SDHC driver in this forum, and it works on my mio A201 (tested with 16GB and 8GB SDHC cards)
can you upload again the english rom
the page expired
thank you
valibuzauro said:
can you upload again the english rom
the page expired
thank you
Click to expand...
Click to collapse
no problem
links updated
thank you so much!
I test now and I'll post result
mine is in swedish
best regards
vali
It is working fine!
thank you again!
best regards
Vali
glad to hear that it was useful not only for me
Hi, the file is in BIN extension. How can I flash it to my A201.
afwebreg said:
Hi, the file is in BIN extension. How can I flash it to my A201.
Click to expand...
Click to collapse
put that file in to card, card in to device and press button combination to get in to bood loader (power button, cant remember other button and reset at the same time) try to google.
works for me too, thank you!
yknot said:
works for me too, thank you!
Click to expand...
Click to collapse
please let me know how to enter in the boot loader menu. i have tried all the possible combinations (power+....+ reset) and it's just loading..and nothing after (just black screen) with a red led flashing (the right led).
adoramiss said:
please let me know how to enter in the boot loader menu. i have tried all the possible combinations (power+....+ reset) and it's just loading..and nothing after (just black screen) with a red led flashing (the right led).
Click to expand...
Click to collapse
dear all,
i succeded to enter bootloader menu: (middle button (JOISTICK) down + power button)
1. flash rom upgrade
2. CE by SDMMC
3. READING IMAGE, flashing, writing OK, verifying OK...Upgrade OK,
iMAGE checksum: 0xf7cacce, restart your device....
after that none of the buttons works (power, reset, ......), nothing.
so if i'm removeing the baterry, put it back, press the power and it is the same dead device (still loading....and nothing after - black screen and red led flashing)
what am i doing wrong ?
is there any other method to flash this thing?
how did you all succeded to instal and make it run again?
please help me and i will thank you for that,
best regards,
put your battery cover back, and try again to power on.
hi, i did this several times. still loading....and than nothing, black screen and the led flashing...
any new ideeas how to make it work again?
the battery cover has a pin, wich is correspondent with a microswitch.
yes, off ad on again after 2 min. (hard reset)....still nothing...
i've tried all possible combinations...
adoramiss said:
yes, off ad on again after 2 min. (hard reset)....still nothing...
i've tried all possible combinations...
Click to expand...
Click to collapse
try german rom maybe it will work, then try english again
and make sure that downloaded file is not damaged, and (it may sound stupid) is your device is Mitac Mio A201?
adoramiss said:
please let me know how to enter in the boot loader menu. i have tried all the possible combinations (power+....+ reset) and it's just loading..and nothing after (just black screen) with a red led flashing (the right led).
Click to expand...
Click to collapse
same problem with my mio a201.........
friendofhell said:
same problem with my mio a201.........
Click to expand...
Click to collapse
strange, mine works fine, try german version of rom
same probleme with german and english rom....my old os was in polish ....greetings
Anyone who can help post the English rom is greatly appreciated. Many thanks.
I have a galaxy s4 i9505, I can power it on, open the custom recovery with the combination of vol+ home and power, so all the keys phisically work.
When i enter the recovery or the OS (stock KK 4.4.4)(I' ve already tried to change recovery or OS) the keys don't work. None of them.
Stupid telephone.
What component/piece of memory control these?
It's better a soft solution, but if it is necessary, I can also change a component.
Thanks
Inviato dal mio HTC One_M8 con XDA Forums
Hi,
Try flashing a stock ROM from here:
http://forum.xda-developers.com/showthread.php?t=2265477
to see if the problem persists
Good luck!
I have a galaxy s4 i9505, I can power it on, open the custom recovery with the combination of vol+ home and power, so all the keys phisically work.
When i enter the recovery or the OS (stock KK 4.4.4)(I' ve already tried to change recovery or OS) the keys don't work. None of them.
Stupid telephone.
What component/piece of memory control these?
It's better a soft solution, but if it is necessary, I can also change a component.
Thanks
Inviato dal mio HTC One_M8 con XDA Forums
Good morning to all...
At the end, it happened: I fell into the water, and my Honor 8 fell with me. Not sea water, at least...
I left it under the sun for many hours and the screen got better, there were many stains which are now barely visibile.
Furthermore, I can't see anymore "steamy" cameras and light sensor.
Actual symptoms:
Can't power it off. But can't power it on
When booting up with no power cable, it goes into recovery mode. I can only:
- reboot
- wipe data
- wipe cache
If I reboot, goes back to same menu.
"Vol down" moves across the items; "vol up" does nothing.
When battery is near zero, I see a red flash icon, then it reboots, a small vibration, then again the red flash icon, and so on.
With USB power connected, it goes into eRecovery:
- download latest version and recovery
- wipe data/factory reset
- reboot
- shutdown
As earlier, If I reboot, goes back to same menu.
"Vol down" moves across the items; "vol up" does nothing.
If I select "shutdown" it simply reboots and starts over.
Do I have hopes? Can I at least recover data from internal memory?
Thank you.
You could try flash via eRecovery and see if it helps... But I'm sad to say you if you haven't a microSD card It should be hard to recover data without a working system
Inviato dal mio FRD-L09 utilizzando Tapatalk
ScardracS said:
You could try flash via eRecovery and see if it helps... But I'm sad to say you if you haven't a microSD card It should be hard to recover data without a working system
Click to expand...
Click to collapse
I have a microSD, but I need to recover data from internal memory, I don't want to flash, otherwise everything will be lost for sure.
Firware is completely stock, not even rooted ... I believe that the "vol up" button got stuck for some reason (due to water), and that's the reason why it always enters recovery or erecovery.
Is there a way to access to internal memory while in recovery/erecovery?
I tried with ADB, but can't manage...
When I use "adb devices" I can't see any attached device.
lollapalooza said:
I have a microSD, but I need to recover data from internal memory, I don't want to flash, otherwise everything will be lost for sure.
Firware is completely stock, not even rooted ... I believe that the "vol up" button got stuck for some reason (due to water), and that's the reason why it always enters recovery or erecovery.
Is there a way to access to internal memory while in recovery/erecovery?
I tried with ADB, but can't manage...
When I use "adb devices" I can't see any attached device.
Click to expand...
Click to collapse
Which version do you have?
Inviato dal mio FRD-L09 utilizzando Tapatalk
ScardracS said:
Which version do you have?
Click to expand...
Click to collapse
Firmware version you mean?
It's an FRD-L09 (EU), firmware is Android 8, not sure if it's 521 or 562.
lollapalooza said:
Firmware version you mean?
It's an FRD-L09 (EU), firmware is Android 8, not sure if it's 521 or 562.
Click to expand...
Click to collapse
I hoped you have FRD-AL00 because it's supported by Chinese HiSuite version... I sorry but I think your problem is the Vol+ and flashing via eRecovery won't help anyway. I don't think you can restore your internal data unless you boot normally in system...
Inviato dal mio FRD-L09 utilizzando Tapatalk
So I guess there's no way to use adb commands when phone is in recovery mode
lollapalooza said:
So I guess there's no way to use adb commands when phone is in recovery mode
Click to expand...
Click to collapse
I'm sorry but no... The only recovery which can do it is TWRP, but you haven't it
Inviato dal mio FRD-L09 utilizzando Tapatalk
ScardracS said:
I'm sorry but no... The only recovery which can do it is TWRP, but you haven't it
Click to expand...
Click to collapse
Thank you...