Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
WARNING
I am not to be held responsible for any negative outcome which might concern your device. You are doing this on your own responsibility!
BE WARNED!
DOWNLOAD
NOTICE
-on Marshmallow,one has to flash the Magisk root zip,otherwise the rom won't boot
Big thanks to @Verevka for the TWRP tree for the Vernee Apollo Lite(which was used as a base)!!
TWRP tree:
https://github.com/TheMarionette/android_device_vernee_mars_1/tree/TWRP-7.1
How to install the recovery onto your device:
1. Rename the downloaded file to "recovery.img"
2. Download and install the SP FlashTool(Download HERE)
3. Open the SP Flashtool,it should look something like the image below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Find the Android Scattter file which you downloaded from HERE
5. Double click on the location of the recovery and select the "recovery.img"
6. make sure that nothing besides the recovery is checked for installation
7. Power off the phone
8. Connect it to the PC(it has to be turned off when being connected,you will see that it is charging,let it turn the screen off)
9. Click the DOWNLOAD button in the SP FlashTool
10.Hold the power on/off button on the phone for a short time until you hear that your computer recognized the connection(*classic usb plug-in sound*)
11. If it went well,you will get a GREEN SUCCESS ICON.
12. Profit
Added the version for MM roms!
DOWNLOAD
it isn't downloading what do i do?
It doesn't work on Nougat. Phone stuck on boot logo.
scytalemk said:
It doesn't work on Nougat. Phone stuck on boot logo.
Click to expand...
Click to collapse
You probably flashed the Marshmallow build on Nougat, of course it doesn't boot.
The Marionette said:
You probably flashed the Marshmallow build on Nougat, of course it doesn't boot.
Click to expand...
Click to collapse
Croats have always been smartasses, of course I'm not so stupid. I didn't marked system partition read only, that's why it won't boot, but it's ok now.
scytalemk said:
Croats have always been smartasses, of course I'm not so stupid. I didn't marked system partition read only, that's why it won't boot, but it's ok now.
Click to expand...
Click to collapse
I am not the one calling you stupid, no need to get sassy. Marking the system as a read-only one should be the default in my TWRP builds as far as I remember, I have no clue how yours was the only one which had that disabled. But good job at figuring it out.
can i use the MT6755 SCATTER on nougat?
Related
Hi all!
After a lot of research of a flashable firmware of this phone i was considering to trashcan it, no one even know what phone it is!
But i have one, and i want to mod it, so stay tuned because something will happen
So what i did? I simply asked Trevi if they send me the firmware, and guess what? They actually did! Im surprised, really.
Well, this firmware is tested out by me, so it's 100% working!
ATTENTION: I'm not responsable for any damage that could happen to your phone
HOW TO:
1) Download THIS package, and extract "Trevi Phablet 5 S 0813" on your desktop/whereveryouwant
2) Open the extracted folder, go into Tool and Driver
3) Open "6577 usb driver" and install them
4) Use THIS version of flashtool, so download it and extract the folder on your desktop/whereveryouwant
5) Open flashtool, select scatter loading, it ll appear a window, search for "Trevi Phablet 5 S 0813" that you extracted before, go into "software" - > " Phablet 5 S 20130716_e1909l_v77_tmx_trevi_6628_v20" -> select "MT6577_Android_scatter_emmc"
6) It should appear like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7) Power off your Trevi Phablet 5S (remove the battery for doublechek that is off)
8) Click "Download" into Flashtool and AFTER, connect your Trevi (if you messed up with partition like me, do "Firmware -> Upgrade", it ll rewrite PMT Layout completely)
9) Wait some moments, all the system is being loaded onto your phone
10) If all went well, you should see this:
If you see like so, just unplug the phone, and power it on
If you don't see like so, just post here the error, and we ll find a solution to make your Trevi Phablet 5S work again ^^
Hope everything is clear and understandable, if not just ask ^^
[port] twrp 2.8.2.0
I managed to port TWRP for this Phablet
So we can now try custom rom, at least try to port it
Hope it can be useful
Bugs:
- You tell me
Download:
- HERE
HOW TO:
- Open Flashtool (First post download link)
- Select again the same scatter file as before
- UNCHECK all voices exept "RECOVERY"
- Download the recovery up here
- click on "RECOVERY", it show up a window, just navigate where's recovery downloaded, and select it
- press "Download"
- Shut down the phone (double check removing battery)
- attach it to the pc via usb cable
- wait some second, if a green circle appear just remove the usb cable, press VOL + and POWER BUTTON to enter recovery
- have fun!
ALERTS: TWRP need more space in recovery partition, you may lost your IMEI, you have been warned, so make a full backup before proceed
Thanks to
@yuweng for his amazing tool
@Dees_Troy for bring up TWRP
Reserved2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
Download:
See " Attached Files"
Install:
Download zip file from above
Unzip the file
Download and install SP Flash Tools
Run SP Flash Tools and load scatter (Use the 'Modded' scatter if you want to install this recovery on a enlarged system partition.)
Press first the 'Download' button, before you connect the device with your pc
Reboot device
Remarks:
It is not possible to boot into recovery by holding some specific keys. You need to use ADB with the command: "adb reboot recovery".
Source code:
TWRP: https://github.com/omnirom/android_bootable_recovery/
Device Tree: https://github.com/Waterboy1602/Android_Device_Tree_Elephone_S3
Hey,
I installed this and the screen becomes irresponsive when I open TWRP. Any ideas?
skytig3r said:
Hey,
I installed this and the screen becomes irresponsive when I open TWRP. Any ideas?
Click to expand...
Click to collapse
I have no idea why it doens't work by you. Could you maybe give me a last_ksmg after you booted into the recovery?
waterboy1602 said:
I have no idea why it doens't work by you. Could you maybe give me a last_ksmg after you booted into the recovery?
Click to expand...
Click to collapse
Hey! Thanks for answering. I don't have it right now but on the weekend I'll be back and post it here.
skytig3r said:
Hey! Thanks for answering. I don't have it right now but on the weekend I'll be back and post it here.
Click to expand...
Click to collapse
I'm sorry for my late answer, but I fixed the problem. Now should your touch work
waterboy1602 said:
I'm sorry for my late answer, but I fixed the problem. Now should your touch work
Click to expand...
Click to collapse
hey! sry, it isn't my phone and I haven't been working on it lately, but now that you say it I'll try again thanks!
Team Win Recovery Project 3.x.x is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Prerequirements:-
1. Your Bootloader must be unlocked. Here is the guide
2. Internal Storage will be wiped.
Bugs:-
1. Battery Percentage doesn't show
2. You tell me
Instructions:-
1. Go to the fastboot mode.
2. Now paste the recovery in adb folder.
3. Open the cmd by holding shift and press right click in adb folder and then click open command promote here.
4. Now to confirm that device is connected properly type:-
Code:
fastboot devices
You'll get your device serial number there.
5. After that type:-
Code:
fastboot flash recovery twrp-3.1.1-0-marino.img
Voilà TWRP flashed successfully.
6. Now unplug your device and then hold power button for 2 secs and then hold volume (-) after that press power button once.
Now you'll find yourself in TWRP.
Enjoy
Links - https://drive.google.com/uc?id=1JYzRlnfLRJRsw3flQhXaorSxeqS5umRK&export=download
Note:- After flashing recovery you must have to wipe Internal Storage to remove encryption. Also, you must have to flash magisk so that it will patch boot.img through which system will not be able to overwrite TWRP again.
Credits:-
Gaurav
Dhruv Agarwal (me)
thanx a lot brother for working on it ..
may be we will get a custom rom soon ???
Finally, something for k8 plus users,
Is there any safe way to relock bootloader after unlocking and flashing this recovery, if I want to take my device to service centre
Thanx
What is the dycrept password?
biswajitpaik said:
What is the dycrept password?
Click to expand...
Click to collapse
Click on cancel
Any news about ROMS??? ??
Any news about ROMS??? :fingers-crossed:
Great work sir
Gonna test it now
Dhruv_Agarwal said:
Click on cancel
Click to expand...
Click to collapse
I've tried everything, first of all wipe /format data for showing internal memory and otg but when I wanted to flash any file through recovery like xposed it had shown decrept password?
not working ...after flashing not able to go to twrp screen pls help
not working ...after flashing not able to go to twrp screen pls help
Plz help how to root Lenovo k 8
Help
Dhruv_Agarwal said:
Click on cancel
Click to expand...
Click to collapse
Hi i am a newbie to rooting. Could you please give me detailed steps. I understood till the point of flashing twrp. After that do I have to wipe data and flash magisk right then? (I have tried installing twrp 2 times but every time after installing and restarting it shows android recovery only.)
One more thing, will I be able to upgrade to oreo through OTA if I have the stock android recovery, since twrp is replaced by stock recovery every time ( although bootloader is unlocked)?
OrangeFox Recovery Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: I AM NOT RESPONSIBLE OF ANY DAMAGE WILL HAPPEN AFTER YOU FLASH THIS Recovery ,
ALWAYS DO BACKUP FIRST
welcome to All j8 users & lots of Love :highfive:
Features
Synced with the latest Teamwin changes
Material design
AromaFM
Implemented support for Flyme and MIUI OTA, and incremental block-based OTA in custom ROMs
Included customization
Inbuilt patches, like Magisk and password reset patch
Password protection
Frequently updated
And many more
DOWNLOADING FILES
OrangeFox-j8y18lte.img (recovery flashable)
OrangeFox-j8y18lte-flashable.zip (recovery zip flashable)
OrangeFox-j8y18lte-Odin-AP.tar (Odin flashable)
Odin v13.3.1 (Make sure you already installed Samsung USB drivers)
sourceforge
DOWNLOAD MODE
1. power off your samsung j8
2. press & hold both vol+ & vol- keys and insert USB driver
3. now you are in Download mode
INSTALLING RECOVERY
1. open odin flash tool
2. make sure you are in download mode and USB is connected
4. now you will see Added logs in log Tab
3. click on AP Tab and select OrangeFox-Recovery-j8y18lte-Odin-AP.tar file
4. now click on start & wait for recovery to be flashed .
5. if recovery flashed correctly you see pass message
NOTE: when you see pass message suddenly press and hold vol- key and power
6. Congratulations you are in OrangeFox recovery now
BUGS
Tell me if you find any
NOTE: do not redirect links, re-upload, but you can always redirect to this thread
Thanks to :
@TeamWin
@OrangeFox
Contributors:
goldfish07(Ayush Bisht)
Source: https://github.com/goldfish07
For Latest TWRP 3.4.0-0 & rooting Guide for Android 10 (One UI 2.0)
Continue to THIS THREAD
Reserved
i can't mount internal storage for some reason..
Bruh everytime after flashing this my phone is sticking on bootloop any solution
j810guser said:
i can't mount internal storage for some reason..
Click to expand...
Click to collapse
format data from recovery
Saliqtatiq said:
Bruh everytime after flashing this my phone is sticking on bootloop any solution
Click to expand...
Click to collapse
reboot to system from recovery
4yush5663 said:
reboot to system from recovery
Click to expand...
Click to collapse
Yeah! i tried it but its booting again and again!!
With the help of @sd_shadow I managed to install OFFICIAL FIRMWARE using manual FASTBOOT only.
Now I need copy of STOCK RECOVERY IMAGE & Fastboot command to install it. Thanks in advance.
austin_dreq said:
With the help of @sd_shadow I managed to install OFFICIAL FIRMWARE using manual FASTBOOT only.
Now I need copy of STOCK RECOVERY IMAGE & Fastboot command to install it. Thanks in advance.
Click to expand...
Click to collapse
Stock Recovery is part of Boot partition (boot.img) on most devices with a/b systems
How A/B Partitions and Seamless Updates Affect Custom Development on XDA
You may have heard of Seamless Updates before. It involves something called "A/B partitions." What is it and how does it affect custom development on XDA?
www.xda-developers.com
sd_shadow said:
Stock Recovery is part of Boot partition (boot.img) on most devices with a/b systems
How A/B Partitions and Seamless Updates Affect Custom Development on XDA
You may have heard of Seamless Updates before. It involves something called "A/B partitions." What is it and how does it affect custom development on XDA?
www.xda-developers.com
Click to expand...
Click to collapse
Oh thanks... But I cannot enter recovery mode?
I remember my phone can with unlocked bootloader. In recovery I restored and it was locked but not updating (Mar security Japan region)... Then I explored August updated ROMs...
Any suggestion how to lock bootloader again?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recovery from Fastboot mode (up - up - power)... Nothing
austin_dreq said:
View attachment 5401873Recovery from Fastboot mode (up - up - power)... Nothing
Click to expand...
Click to collapse
That's recovery
@ that screen hold power button and tap volume up button
Charge your battery 30% or more.
Turn off the phone.
Press and hold the Volume Down button and the Power button at the same time until the phone turns on.
Press the Volume Down button until you see Recovery mode.
Press the Power button to restart in Recovery mode.
If you see an Android robot with a red exclamation mark, press and hold the Power button and, while holding it down, press and release the Volume up button.
Reset my phone| Motorola Support ROE
Visit the customer support page to view user guides, FAQs, bluetooth pairing, software downloads, drivers, tutorials and to get repair and contact us information.[[ANSWERSUMMARY]]
motorola-global-en-roe.custhelp.com