Hello,
So back in December I bought this unit: http://www.ebay.co.uk/itm/Android-5...108938?hash=item360c26e28a:g:ZoQAAOSwJ7RYUh1Y
I am very happy with my purchase, however about a month ago all the buttons didn't work, sometimes when I went for a drive. The next time I went for a Drive they would work again. A few weeks ago they alle stopped working permantly. I've installed Malaysk rom, but I don't know whether it is the mtckeys module or a hardware problem? My steering wheel control buttons works perfectly, and I can change the volume on the unit, but not press the button.
I've tried resetting the device, without luck.
What now? Any advice?
Thanks in advance.
velein said:
Hello,
So back in December I bought this unit: http://www.ebay.co.uk/itm/Android-5...108938?hash=item360c26e28a:g:ZoQAAOSwJ7RYUh1Y
I am very happy with my purchase, however about a month ago all the buttons didn't work, sometimes when I went for a drive. The next time I went for a Drive they would work again. A few weeks ago they alle stopped working permantly. I've installed Malaysk rom, but I don't know whether it is the mtckeys module or a hardware problem? My steering wheel control buttons works perfectly, and I can change the volume on the unit, but not press the button.
I've tried resetting the device, without luck.
What now? Any advice?
Thanks in advance.
Click to expand...
Click to collapse
That unit is a erisin unit. I think they are labeled as LM (MTCD_LM_xxx). Firstly you have to update to the latest mcu 2.41:
https://mega.nz/#!dQdkiDQR!PeaZO5QSrG7L-755GWUwlMsuxnbB85WHZK3C-lr52Eo
Then go to factory settings (password 123456) and check the options for the hardware buttons (the best is to check with erisin which is the correct option for your unit model - the mcu can control all buttons for all erisin models but you have to select the correct option on settings)
Enviado desde mi D6603 mediante Tapatalk
From what I can see on the pictures etc. It is labeled MTCD_KGL?
Same problem
Did you solve?
Inviato dal mio SM-G935F utilizzando Tapatalk
I have the same problem. Any solution yet?
For me not.
Erisin doesn't answer to me
Inviato dal mio SM-G935F utilizzando Tapatalk
Any news about this? I have the same problem with my Px5 device and Malaysk rom
Related
Sorry for bothering you. I really need some help with my MIO p560 PDA. Yesterday I started it, it showed on the screen the MIO logo etc. and then black screen. What is strange is that the pda is working, but there is no image on the screen. I can connect with usb cable in windows and i can browse the files from it. The only problem is that there is no image on the screen. But the display is ok because i see the MIO logo at power on. So it seems that there is a problem with windows mobile 6. Does anyone know if there is a possibility to change some windows config files?
Best regards,
marmura
make a hard reset..press the jog up and slide the power button and then maintaining the jog pressed up slide the power on.
Mio PDA P560
Hi, I have a Mio PDA P560. After I installed 2 external programs (Worldmate and IDELIXlookMOBILE) my device can not call the Maps on the SD Card, it can not activate the WiFi, the program for deinstalling of programs doesnot work, and the hard reset does not work.
Does know anybody what is to do ? Can somebody send me the OS windows mobile 6.0 Greek for this device PDA Mio P560?
Can somebody say to me how I can deinstall ANYTHING ( incl. operating system ) on my PDA and then reinstall the OS?
Thanks
daivatam said:
make a hard reset..press the jog up and slide the power button and then maintaining the jog pressed up slide the power on.
Click to expand...
Click to collapse
Hard reset does not word as you are describing. I tried all time in such way.
Hi,
but your pda in bootloader mode and use the tool you find to restore it, do the following.
with your pda off keep the joystick right and the right button. Without releasing them switch your pda on and keep them pressed until the blu screen come.
Do you guys have any english rom for the mio p560 ?
I really need it as I have to flash mine.
Cheers,
Bernard.
my phone began to show only static "snow"/tv like (lot of color points on white background)
the touch still works, and it seems that the phone still responding (volume up/down etc)
how can it be fixed?
if it a hardware problem can someone post me a link to the part i need?
thanks
please help
it looks exactly like this:
http://sonymobile.lithium.com/legacyfs/online/10522_2012-04-12 18-28-27.045.jpg
shose said:
please help
it looks exactly like this:
http://sonymobile.lithium.com/legacyfs/online/10522_2012-04-12 18-28-27.045.jpg
Click to expand...
Click to collapse
I think you have broken display ,you need to replace it, how did you make to this state?
sent from HTC Sensation 4G
@shose, You can go to recovery?
no, i cant go to recovery
Actually I think it does go to recovery but doesnt show that, because after it "goes to recovert", if I press the volume button it instantly restart the phone (like in recovert - restart the device)
And I dont know how it got this situation. it was lying on the desk overnight (not charching), and on the morning it showed only this static screen
thanks again for all your help!
Now I think that is a hardware problem but for me isn't display error.
I don't know how help you.
Sorry.
Inviato dal mio HTCSensation utilizzando Tapatalk
thanks anyway
any more suggestions?
I have the same problem. I've been searching around but nobody seems to have a fix. There are 2 or 3 other threads with the same issue here and a few in other places around the net. It happened to me while gps was running and the map software was frozen. I was holding the power button to try to bring it back without popping the battery out when it went to snow and is now permanent.
Hello. Hope this is the right place to ask this.
I changed a setting under "factory setting" and now the HU wont boot up. The setting was "Default power status" changed it from on to off. I also turned of the canbus under factory setting and when i wanted to exit i needed to reboot and then it never booted up again. It might boot up but there isnt comming anything on the screen.
I really hope that someone call help me fix this.
My unit it this on. Bought on iceboxauto http://www.iceboxauto.com/opel-astra-j-2010-2012-android-60-b5754
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In my px3 i set default Power status in "off" and i have no problem.
Did you try to hold Power button (about 15 sec. till blinking led lights) for resetting HU?
Sorry for my bad english
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
colostro said:
In my px3 i set default Power status in "off" and i have no problem.
Did you try to hold Power button (about 15 sec. till blinking led lights) for resetting HU?
Sorry for my bad english
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
Click to expand...
Click to collapse
There are no fysical buttons on the unit. I have tried to hold the power button on my dash board but stil nothing happen
You can try:
1) reset button (if there is It, you can check under gps slot)
2) unplug the connector or turn off the fuse box to reset the hu
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
Press reset until you see light blinking (15-20sec). Release and press again reset until marshmallow logo appears...release and you will enter into recovery menu
Enviado desde mi D6603 mediante Tapatalk
colostro said:
You can try:
1) reset button (if there is It, you can check under gps slot)
2) unplug the connector or turn off the fuse box to reset the hu
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
Click to expand...
Click to collapse
1) There is no reset button. Under the GPS slot there is a very small hole but nothing behinde the hole )
2) I have unlug the connector to the HU and tried to have it off power for an hour or two and then try to start but still the same. Nothing show on the screen. Not even to android logo. What you mean with fusebox i dont know
ikerg said:
Press reset until you see light blinking (15-20sec). Release and press again reset until marshmallow logo appears...release and you will enter into recovery menu
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
I dont see any reset button on this HU. Behind the Gps slot there is a small hole but nothing behind the hole. should be a switch or something to press
almera020 said:
I dont see any reset button on this HU. Behind the Gps slot there is a small hole but nothing behind the hole. should be a switch or something to press
Click to expand...
Click to collapse
Ask your seller...or read the instructions that came installed into your unit
Enviado desde mi D6603 mediante Tapatalk
ikerg said:
Ask your seller...or read the instructions that came installed into your unit
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
I talked to the seller today and he told me to press the reset button next to the gps slot. When i told him there isnt anything behind the hole he didnt know what to do. Great :silly:
I got my unit up running again. Because i dont have any fysical buttons on my unit and i ****ed up the canbus setting the only way to wake the HU up again is to disassemble the screen and on the board there are some connection where you can solder wires to. One of them is "key1" and when i put i wire from that to GND the screen turned on. There is also a "key_rst" thats for resetting the HU. There isnt any wires on those so later i will make it on my own so i dont have to disassemble the screen if i **** something up
Hey , I did the same mistake with "default power status". I can get into recovery menu, is it enough to wipe the firmware(not MCU) of the device?
Thanks
Made the same mistake with this setting.
If I press and hold power button after about 15 seconds button lights come on and then flash. Keeping hold of button and lights stays on but screen is doing nothing.
Reset button causes lights to flash but then go out. Again nothing on screen.
Mtcd px5 unit.
Seems like something is going on because a message of 'other' appears on car standard fit display next to clock which is what generally appears when head unit was working.
Maybe there is combination of power an reset needed.
Eventually into recovery press and hold power button until lights flash then let go and press again. Took a few goes to get timing right. Then key was that I had an exported MCU conf file so I reflashed MCU with this so default power setting was back to being OK.
movieifx said:
Made the same mistake with this setting.
If I press and hold power button after about 15 seconds button lights come on and then flash. Keeping hold of button and lights stays on but screen is doing nothing.
Reset button causes lights to flash but then go out. Again nothing on screen.
Mtcd px5 unit.
Seems like something is going on because a message of 'other' appears on car standard fit display next to clock which is what generally appears when head unit was working.
Maybe there is combination of power an reset needed.
Eventually into recovery press and hold power button until lights flash then let go and press again. Took a few goes to get timing right. Then key was that I had an exported MCU conf file so I reflashed MCU with this so default power setting was back to being OK.
Click to expand...
Click to collapse
I have the exact same problem, I changed the "Default power status" in factory settings to off and after the reboot the system would not come back up. Odd part is if I wait a few minutes my phone will still connect to the radio via bluetooth. Seems almost like only the LCD is not powering on. Since I can still get to recovery would it be possible to get a copy of your MCU conf file so I can try and reflash? My unit is a KGL and I currently have the 7th Floor mod MCU installed on the radio. Any help anyone can provided would be much appreciated.
Blitz_s14 said:
I have the exact same problem, I changed the "Default power status" in factory settings to off and after the reboot the system would not come back up. Odd part is if I wait a few minutes my phone will still connect to the radio via bluetooth. Seems almost like only the LCD is not powering on. Since I can still get to recovery would it be possible to get a copy of your MCU conf file so I can try and reflash? My unit is a KGL and I currently have the 7th Floor mod MCU installed on the radio. Any help anyone can provided would be much appreciated.
Click to expand...
Click to collapse
Never mind I was able to grab the modified DMCU.IMG KGL file from here, and then add the DMCU.CFG file from here, then throw them on the root of my GPS SD card, then boot into recovery and flashed the MCU. After the reboot the screen came right on. I just had to go into factory settings and make the needed changes for my radio.
I was stupid enough to did this same to my HU.
All because it draw 0.25A when in slip mode (ACC OFF).
I try to different options to drop power consumption and change this option in process.
Off course I have brick my unit. Any way to recovery it??
Dont have any hardware buttons no GPS slot. How to reset this unit??
Any ideas??
HipHopAst said:
I was stupid enough to did this same to my HU.
All because it draw 0.25A when in slip mode (ACC OFF).
I try to different options to drop power consumption and change this option in process.
Off course I have brick my unit. Any way to recovery it??
Dont have any hardware buttons no GPS slot. How to reset this unit??
Any ideas??
Click to expand...
Click to collapse
Suggest having a read through links in my signature. If your unit, which you havent said what type it is - is drawing 0.25A in sleep, then that's a problem.
marchnz said:
Suggest having a read through links in my signature. If your unit, which you havent said what type it is - is drawing 0.25A in sleep, then that's a problem.
Click to expand...
Click to collapse
My Unit is MTCE GS PX5.
It was unit with out radio module (xtrons for Freelander2) so i solder one on board. In process have to change MCU from GS to KDL to get it work. Then when unplug ACC cable from 12V radio going to sleep and after few seconds will constant draw 0.25A around 3W. I cant remember how it was before but previews owner sold to me because of battery draining issue. I believe its bit much as will drain car battery quite fast. So i try to find a way to eliminate this flaw. In order i change option "Default power status" to off and since that my screen is blank. Looks like radio is working as Bluetooth is broadcasting. I try to fiddling with it for bit more if not probably only option is to program STM32 with ST-Link STLink V2 Programmer. Maybe any ideas how to reset this settings.
BTW bit stupid to put option that can brick you radio in easy accessible place.
HipHopAst said:
My Unit is MTCE GS PX5.
It was unit with out radio module (xtrons for Freelander2) so i solder one on board. In process have to change MCU from GS to KDL to get it work. Then when unplug ACC cable from 12V radio going to sleep and after few seconds will constant draw 0.25A around 3W. I cant remember how it was before but previews owner sold to me because of battery draining issue. I believe its bit much as will drain car battery quite fast. So i try to find a way to eliminate this flaw. In order i change option "Default power status" to off and since that my screen is blank. Looks like radio is working as Bluetooth is broadcasting. I try to fiddling with it for bit more if not probably only option is to program STM32 with ST-Link STLink V2 Programmer. Maybe any ideas how to reset this settings.
BTW bit stupid to put option that can brick you radio in easy accessible place.
Click to expand...
Click to collapse
Just little update. I already order ST programmer and now wait for delivery.
When i have close look (and from different angle) on radio screen I can see that radio boot to OS and first page pop out. Just screen back light not working and touch as well.
Also Usb is switch off so no keyboard can be connected. Only option is to reset this setting but dont know how or programming MCU.
HipHopAst said:
Just little update. I already order ST programmer and now wait for delivery.
When i have close look (and from different angle) on radio screen I can see that radio boot to OS and first page pop out. Just screen back light not working and touch as well.
Also Usb is switch off so no keyboard can be connected. Only option is to reset this setting but dont know how or programming MCU.
Click to expand...
Click to collapse
Job Done.
Radio back to live by programmed MCU using ST link.
Still problem with drainage but already order new MCU and will try to replace it as at the moment STM32 is very warm when on STBY (ACC OFF) so probably there is a problem.
Regards
Have a new China headunit with android 7.1.2 and first there was no FM radio. Searched XDA and with password m123456 got into factory settings and there the radio stood OFF?? Changed it to ON and after restart it was there. But there's no signal, no sound, nothing. Anyone ideas?
Also, this is a monitor with no buttons. How do you get in recoverymode when there's no on/off button? I only have the reset possibility (little hole on the side of the monitor).
Info headunit; see attachments
pgee said:
Have a new China headunit with android 7.1.2 and first there was no FM radio. Searched XDA and with password m123456 got into factory settings and there the radio stood OFF?? Changed it to ON and after restart it was there. But there's no signal, no sound, nothing. Anyone ideas?
Info headunit; see attachments
Click to expand...
Click to collapse
Did you select your country as well ?
If you mean the region for the radio in factory settings, I did.
If you mean region in Android, like date and clock? Somehow I only can set it manually. If I choose automatic date/time it stays on Chinatime?
And do you have your radio antenna Installed?
For going into recovery:
Press reseat button until you see flashing the button lights..(approx 25sec)
Release and press again until see your nougat logo.
Release and wait for recovery menu
Enviado desde mi SM-G950F mediante Tapatalk
Radio antenna, isn't that the microphone? There's no separate antenna plug? See https://www.seicane.com/android-hd-...hd-1080p-video-steering-wheel-control-s018848
Recovery; press reset button until you see flashing the button lights.. (approx 25sec) >> what button lights flash? There are no buttons
WOW would you look at that unit !! Does it drive the car for you too !!?? lol Judging by the pictures it must be on the box somewhere but when zooming in I cant see if/where it would say ANT..
Yes, looks impressive, car almost drives itself . Works very well, nice touchscreen, only no radio signal. Also the steering wheel buttons can't be changed. But they work well, although would be nice if I could customize them.
Sorry to say, but there's nothing on the box for a Antenna. The only thing saying something about an Antenna is on the big plug/connector witch connects to the original radio. On the attached picture there are 2 pins ANT. Does it use the original car antenna through the connector of the original radio?
It says that it syncs with the cars bluetooth have you been able to get and kind of sound with it ?
Your new unit don't have radio, the radio is from stock unit, you must have to connect your new unit in conjunction with the stock unit. And there is a "app icon" that switch to original menu and there's your radio.
You just change the stock screen for the new one and connect the original cable of the stock screen to the connection labeled car lvds
Cid6.7: yes, bluetooth works fine and the sound is good!
Hugovw1976: I did not know there wouldn't be a radio in Andorid. I can switch between stock and Android. But, when I go to Android the stockradio stops. The only way to go from stockradio to Android is when I push long the GPS button on the steeringwheel. Stockradio keeps playing and GPS (IGO) starts on the screen. I can go back to the radio but then the GPS stops.
Are you saying there isn't even a FM receiver in the central box?
Oh, and thanks for the replies, now we are getting somewhere.
pgee said:
Cid6.7: yes, bluetooth works fine and the sound is good!
Hugovw1976: I did not know there wouldn't be a radio in Andorid. I can switch between stock and Android. But, when I go to Android the stockradio stops. The only way to go from stockradio to Android is when I push long the GPS button on the steeringwheel. Stockradio keeps playing and GPS (IGO) starts on the screen. I can go back to the radio but then the GPS stops.
Are you saying there isn't even a FM receiver in the central box?
Oh, and thanks for the replies, now we are getting somewhere.
Click to expand...
Click to collapse
I install a similar unit (the central box is the same) on a Audi Q3 an there's no radio.
Thanks, that makes everything clear. Do you have experience with the steering wheel settings? When I turn it on in the factorysettings and restart the system it comes up in Android settingsmenu. When I start it up I get a black screen?
When in recovery mode how to scroll in the menu?
Or does the touchscreen work in recovery mode?
pgee said:
When in recovery mode how to scroll in the menu?
Or does the touchscreen work in recovery mode?
Click to expand...
Click to collapse
Usually with the same reset button...
Short press-》 move to next option
Long press -》 validate option
Enviado desde mi SM-G950F mediante Tapatalk
pgee said:
Thanks, that makes everything clear. Do you have experience with the steering wheel settings? When I turn it on in the factorysettings and restart the system it comes up in Android settingsmenu. When I start it up I get a black screen?
Click to expand...
Click to collapse
Sorry I can't help
Learned from another topic when you have Canbus you can't set the steering wheel keys
ikerg said:
And do you have your radio antenna Installed?
For going into recovery:
Press reseat button until you see flashing the button lights..(approx 25sec)
Release and press again until see your nougat logo.
Release and wait for recovery menu
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
Hi, can't get into recovery.
Do I have to press reset button when unit is off or on?
Took power cable off, pressed reset button, put power cable on and followed your instructions. Did not work.
Please advise.
Solved:
First in the systemmenu there was no way to activate developer settings in the normal way. Solved this with Total Commander.
Bought a USB cable, in my case A to A. Couldn't get in because USB standard is set on 'Host' and it is not possible to connect with a OTG cable.
In factorysettings wrote 'abdon' and immediately the headunit came up on the with USB connected Windows PC .
On PC choose to see the files. It works!
Downloaded latest SDK. Opened commandprompt and changed dir to the SDK directory.
Put in command: 'adb devices' (without the quotes) and there it was!!
The command that worked for me to get into recovery is: 'adb reboot recovery'
Only problem left: fastboot is not working in recovery mode. I think the problem is that the USBconnection goes back in Hostmode when booting into recovery. Anyone now how to solve this?
Hi guys I have had a teyes spro plus for a couple of months on a vauxhall insignia. I have never been able to get the steering controls to work, when I click on the steering buttons the car comes up with volume icon on the dash clocks and says no audio and when I try to change the canbus to insignia everytime its like it isn't saving the setting and keeps going back to like I haven't set it up. If I reboot the unit and goto steering buttons it flashes up for a second to press a button on the wheel to configure then nothing... everything else works on screen like door opening, climate control, reverse camera ect just not the steering controls..im pretty sure the 4 pin usb hasn't any power either im yet to confirm this with a multimeter. I have updated the unit to the latest firmware but still the same.
Any ideas? Or anything i can try? Thanks
What did reseller and/or installer suggest.
Any info in the teyes discussion post?
I bought it directly from teyes and installed it myself. Ive went through all the connections all seem ok. I've contacted teyes who said it was an issue with the firmware why it wasn't saving wait for the new one which I did but its exactly the same.
Is there a teyes discussion post sorry I've missed it have you a link bud thanks
Don't know if this is related, but the supplied Teyes wiring harness had an unplugged small white connector, I plugged the connectors together and could not get the steering wheel to learn. Unplugged the connector and was able to program the steering wheel buttons.
morephun said:
Hi guys I have had a teyes spro plus for a couple of months on a vauxhall insignia. I have never been able to get the steering controls to work, when I click on the steering buttons the car comes up with volume icon on the dash clocks and says no audio and when I try to change the canbus to insignia everytime its like it isn't saving the setting and keeps going back to like I haven't set it up. If I reboot the unit and goto steering buttons it flashes up for a second to press a button on the wheel to configure then nothing... everything else works on screen like door opening, climate control, reverse camera ect just not the steering controls..im pretty sure the 4 pin usb hasn't any power either im yet to confirm this with a multimeter. I have updated the unit to the latest firmware but still the same.
Any ideas? Or anything i can try? Thanks
Click to expand...
Click to collapse
Hi mate i had same issue, and i manage to fix it.
But we dont have same car, is that spro with newer update from cc2 or?
anyway how to fix it:
You need to install older original Steering control.apk, I manage to extract from older firmware and installed it in newer one. And it works like charm with older program.
tiestolord said:
Hi mate i had same issue, and i manage to fix it.
But we dont have same car, is that spro with newer update from cc2 or?
anyway how to fix it:
You need to install older original Steering control.apk, I manage to extract from older firmware and installed it in newer one. And it works like charm with older program.
Click to expand...
Click to collapse
Hey! I'm also having the same issue. Could I ask you to send me a link with the older apk, since I can't find it anywhere
tiestolord said:
Hi mate i had same issue, and i manage to fix it.
But we dont have same car, is that spro with newer update from cc2 or?
anyway how to fix it:
You need to install older original Steering control.apk, I manage to extract from older firmware and installed it in newer one. And it works like charm with older program
Click to expand...
Click to collapse
Hi
Would you be able to guide me through how to extract from the firmware the steering wheel apk. I try to find it from the firmware but not abe to see it.
Thanks.
tiestolord said:
Hi mate i had same issue, and i manage to fix it.
But we dont have same car, is that spro with newer update from cc2 or?
anyway how to fix it:
You need to install older original Steering control.apk, I manage to extract from older firmware and installed it in newer one. And it works like charm with older program.
Click to expand...
Click to collapse
Hi do you still have the old APK for the canbus you extracted?
Hi guys
My spro plus stopped working since 1 week and I’m unable to find the issue I checked everything changed the 15A also but didn’t resolved the issue. It just shows the black screen when the engine starts and the button lights just turn on and off after few seconds.
I contacted the technical teyes team they said your device is broken.
akobkz said:
Hi guys
My spro plus stopped working since 1 week and I’m unable to find the issue I checked everything changed the 15A also but didn’t resolved the issue. It just shows the black screen when the engine starts and the button lights just turn on and off after few seconds.
I contacted the technical teyes team they said your device is broken.
Click to expand...
Click to collapse
Send it back / warranty.