Related
Hi, I know this should be a lame or noob question, but there is:
I have a Mate 8 NXT-L09, compilation NXT-L09C521B138, which is from Movistar Latin America (vendor=telefonica, Country=la). It came with some preloaded apps, customized boot animation, and some system configurations I cannot modify (such as SMS gateway, so I can't send any SMS). I want to install some "clean" compilation, and I looked up the compilation of a stock phone in a Huawei Store of my country, and it was NXT-L09C605B100, and it comes without any custom configuration.
So, my question is: Can I install any CUST compilation to my phone? or I'm stucked in the "C521 Series" compilation? is there any compatible list or something like that?
Thanks a lot, any advice would be apreciated. Sorry for my bad english.
+1 to you question, I have the same problem with my Mate 8 L09C25B120 Claro Honduras LA, I need flash clean stock firmware
Sent from my HUAWEI NXT-L09 using Tapatalk
You need to unlock bootloader and fatboot flash cust.img you want . Use huawei extractor to get cust image from desired rom
h4ni said:
You need to unlock bootloader and fatboot flash cust.img you want . Use huawei extractor to get cust image from desired rom
Click to expand...
Click to collapse
so i can flash any cust ROM without any function risk, aside of the brick risks?
Hello, i have a big doubt about unlock my Mate 9.
I have read some guides but i'am confused, i will not lose the warranty and i see that with software dc-unlocker is possible relock the bootloader at original status, it is right? there are other softwares that do same job?
Sorry for my bad english.
thanks for help
Khris00 said:
Hello, i have a big doubt about unlock my Mate 9.
I have read some guides but i'am confused, i will not lose the warranty and i see that with software dc-unlocker is possible relock the bootloader at original status, it is right? there are other softwares that do same job?
Sorry for my bad english.
thanks for help
Click to expand...
Click to collapse
There's a difference between lock and relock.
Relock will say 're-locked' in the bootloader, and that's probably voiding warranty.
You can get it to say 'locked' by flashing official firmware, you have a few options here...
1. Firmware Finder
2. Flash update guide
3. Dload method (only for C636B136 and AL00C00B115)
4. FunkyHuawei (paid)
5. Dc unlocked (i think anyway, and paid)
ante0 said:
There's a difference between lock and relock.
Relock will say 're-locked' in the bootloader, and that's probably voiding warranty.
You can get it to say 'locked' by flashing official firmware, you have a few options here...
1. Firmware Finder
2. Flash update guide
3. Dload method (only for C636B136 and AL00C00B115)
4. FunkyHuawei (paid)
5. Dc unlocked (i think anyway, and paid)
Click to expand...
Click to collapse
thanks for answer
So is possible change the status just flashing the stock firmware? is so simple?
i need to do then unlock bootloader>>install modded recovery>>flash modded rom. For return to the stock firmware and bootloader locked what i need to do? i flash the stock firmaware but the twrp remain?
thanks
Khris00 said:
thanks for answer
So is possible change the status just flashing the stock firmware? is so simple?
i need to do then unlock bootloader>>install modded recovery>>flash modded rom. For return to the stock firmware and bootloader locked what i need to do? i flash the stock firmaware but the twrp remain?
thanks
Click to expand...
Click to collapse
No. When you flash stock firmware everything is back to stock. If there was a way to flash a modified update.zip with Twrp as recovery instead of stock recovery it would be possible. But as far as I know we can't yet. I've tried to repack using Huawei Update extractor but it doesn't want to, header mismatch. (this is on all extracted files, not just twrp)
The only reason to get locked bootloader would be if you needed to return the phone because of a software error. If it's hardware it should be replaced anyway.
ante0 said:
There's a difference between lock and relock.
Relock will say 're-locked' in the bootloader, and that's probably voiding warranty.
You can get it to say 'locked' by flashing official firmware, you have a few options here...
1. Firmware Finder
2. Flash update guide
3. Dload method (only for C636B136 and AL00C00B115)
4. FunkyHuawei (paid)
5. Dc unlocked (i think anyway, and paid)
Click to expand...
Click to collapse
ante0 said:
No. When you flash stock firmware everything is back to stock. If there was a way to flash a modified update.zip with Twrp as recovery instead of stock recovery it would be possible. But as far as I know we can't yet. I've tried to repack using Huawei Update extractor but it doesn't want to, header mismatch. (this is on all extracted files, not just twrp)
The only reason to get locked bootloader would be if you needed to return the phone because of a software error. If it's hardware it should be replaced anyway.
Click to expand...
Click to collapse
thanks for help Ante and sorry for my newbie questions, i will just flash one mod rom instead a stock i have now(B182) because i don't like emui, but if is possible when i'll go to sell i can back to stock condition and warranty Ok, i can do that?
thanks
Khris00 said:
thanks for help Ante and sorry for my newbie questions, i will just flash one mod rom instead a stock i have now(B182) because i don't like emui, but if is possible when i'll go to sell i can back to stock condition and warranty Ok, i can do that?
thanks
Click to expand...
Click to collapse
Yep. Flashing stock firmware will do that.
You won't get rid of emui though. We don't have AOSP so emui is always there...
ante0 said:
Yep. Flashing stock firmware will do that.
You won't get rid of emui though. We don't have AOSP so emui is always there...
Click to expand...
Click to collapse
you mean all modded roms are emui based?
Khris00 said:
you mean all modded roms are emui based?
Click to expand...
Click to collapse
Yes.
And there are only 2. RomAur and Ephemeral
ante0 said:
Yep. Flashing stock firmware will do that.
You won't get rid of emui though. We don't have AOSP so emui is always there...
Click to expand...
Click to collapse
ante0 said:
Yes.
And there are only 2. RomAur and Ephemeral
Click to expand...
Click to collapse
thanks again
ante0 said:
There's a difference between lock and relock.
Relock will say 're-locked' in the bootloader, and that's probably voiding warranty.
You can get it to say 'locked' by flashing official firmware, you have a few options here...
1. Firmware Finder
2. Flash update guide
3. Dload method (only for C636B136 and AL00C00B115)
4. FunkyHuawei (paid)
5. Dc unlocked (i think anyway, and paid)
Click to expand...
Click to collapse
sorry for my bad thing. But can i ask you help me this case:
i have Mate 9 Pro LON-L29C636C361 (lastest Oreo ) , but my bootloader is unlocked, and maybe not have stock recovery .
So, which method can flash again full rom C361 (3 file : update.zip, data full, hw...etc) and complete back to stock with locked bootloader???
I read somewhere about method LON-HWOTA, but it fail when flash TWRP step, because i am on Oero, so this method can not use in this my case . Can you show me another way ?
to relock bootloader on Android 8 (MUI8), only works if you have your CORRECT oeminfo.bin. make sure you backup yours before rebranding
1. just flash TWRP
2. make folder folder HWOTA8 on SD card
3. Download HWOTA8 and copy "hwota8_rebrand" to SDcard
4. Copy your oeminfo.bin file to HWOTA8 folder.. Make sure to rename your file to oeminfo.bin
5. Boot into TWRP and install from SDcard hwota8_rebrand
Done bootloader relocked
Hello developers i need help !!!
I am having a serious issue with mate 9. I was going through this method
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656
Unlocked bootloader , install twrp after that i replaced oem file as u have given in the international version
But now it is only showing fastboot ,download or the updating screen as it fails on 5%....
As i have tried many official roms after putting them in externalsd card/dload, but the procedure fails every time
Now i m stuck in bootloader, unlocking not working
Installing twrp not working
Please help
I was using aur rom
link https://forum.xda-developers.com/mat...5v1-0-t3575146
and before
I had a middle east version
MHA-L29C185b172
I got stuck following the same guide after replacing oeminfo to L29C636.
If you are able to get in TWRP i suggest restoring OEMinfo to original and start following this guide to rebrand.
@edit: Could you elaborate why bootloader unlock doesn't work?
Cant unlock bootloader
Bulrock said:
I got stuck following the same guide after replacing oeminfo to L29C636.
If you are able to get in TWRP i suggest restoring OEMinfo to original and start following this guide to rebrand.
@edit: Could you elaborate why bootloader unlock doesn't work?
Click to expand...
Click to collapse
Now i only want is to unlock bootloader for that i cant do that by any adb & fastboot softwares.
.tried lot of them but always : command not allowed:
My phone current status
Phone locked
Frp lock
Some how by force bootloader unlocking , after that there is nothing to worry about, but just bootloader unlocking.
Now i dont know what are settings for oem enabled or disabled, or the other developer settings.
Now i have given mate 9 to a famous repairing centre,
They told me that this is hardware issue and it would be around 300 us dollars worth repairing.
Now dont know what to do..
Please help developers...
JAZZYBUTT999 said:
Hello developers i need help !!!
I am having a serious issue with mate 9. I was going through this method
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656
Unlocked bootloader , install twrp after that i replaced oem file as u have given in the international version
But now it is only showing fastboot ,download or the updating screen as it fails on 5%....
As i have tried many official roms after putting them in externalsd card/dload, but the procedure fails every time
Now i m stuck in bootloader, unlocking not working
Installing twrp not working
Please help
I was using aur rom
link https://forum.xda-developers.com/mat...5v1-0-t3575146
and before
I had a middle east version
MHA-L29C185b172
Click to expand...
Click to collapse
Since your frp is locked you won't be able to flash anything.
Did the OEMINFO restore successfully in twrp?
When you do dload, you are putting UPDATE.APP in /extsdcard/dload/?
And you are using https://drive.google.com/file/d/0B9GG_Oe0gQDyUWlCS3lTRm5IOUE/view (C636B136)?
Because no other firmware will work with dload (Except for AL00C00B115).
Dload MHA-L29C636B181
https://drive.google.com/drive/folders/0ByXR42Nu62ndNEdfSFQ1STdQM00
newyesor said:
Dload MHA-L29C636B181
https://drive.google.com/drive/folders/0ByXR42Nu62ndNEdfSFQ1STdQM00
Click to expand...
Click to collapse
B181 is not an offline firmware so it can't be used with Dload.
And that folder you linked is empty.
newyesor said:
So sorry,I have no check this link.
Update newlink dload
https://drive.google.com/uc?id=0B51CNA4cML2LZ0pjQi1TS04wWlU&export=download
Click to expand...
Click to collapse
That ones in the trash, apparently.
ante0 said:
B181 is not an offline firmware so it can't be used with Dload.
And that folder you linked is empty.
Click to expand...
Click to collapse
So sorry,I have no check this link.
Update newlink dload
https://drive.google.com/uc?id=0B51CNA4cML2LZ0pjQi1TS04wWlU&export=download
Thanks for the replying
Appreciate your replies
i will download firmware right now and will update you as soon as possible.
I had successfully replaced/restored oem files to the international version l29c636.
But after that every thing got stuck.
Once again thanks:good::good::good:
JAZZYBUTT999 said:
Appreciate your replies
i will download firmware right now and will update you as soon as possible.
I had successfully replaced/restored oem files to the international version l29c636.
But after that every thing got stuck.
Once again thanks:good::good::good:
Click to expand...
Click to collapse
Congrats! Please describe all the steps. Thanks!
Please update link
newyesor said:
So sorry,I have no check this link.
Update newlink dload
https://drive.google.com/uc?id=0B51CNA4cML2LZ0pjQi1TS04wWlU&export=download
Click to expand...
Click to collapse
Hi newyesor,
For some reason i got my device back to much late,
So now i want to flash c181 firmware,
Please update the link. It shows firmware in the bin.
Thanks...:good::good::good:
Dload c636B181
https://drive.google.com/uc?id=0B51CNA4cML2LZ0pjQi1TS04wWlU&export=download
https://drive.google.com/drive/mobile/folders/0ByXR42Nu62ndNEdfSFQ1STdQM00
newyesor said:
Dload c636B181
https://drive.google.com/uc?id=0B51CNA4cML2LZ0pjQi1TS04wWlU&export=download
https://drive.google.com/drive/mobile/folders/0ByXR42Nu62ndNEdfSFQ1STdQM00
Click to expand...
Click to collapse
Wow! It is OFFLINE_UPDATE. Where you got it? Do you have other offline updates? For C432, C567 ?
I am get file dload from technicial huawei.
I have not file dload for c432 or c567.
I am so sorry.
Not working
5[Strogino] said:
Wow! It is OFFLINE_UPDATE. Where you got it? Do you have other offline updates? For C432, C567 ?
Click to expand...
Click to collapse
Your provided firmware seems to be failing again and again
Tried many times but it fails after 5%
Help needed
JAZZYBUTT999 said:
Your provided firmware seems to be failing again and again
Tried many times but it fails after 5%
Help needed
Click to expand...
Click to collapse
It is not mine. But what is your current oeminfo? You need be on c636 to install this offline rom. Other customization are not compatible.
newyesor said:
Dload c636B181
https://drive.google.com/uc?id=0B51CNA4cML2LZ0pjQi1TS04wWlU&export=download
https://drive.google.com/drive/mobile/folders/0ByXR42Nu62ndNEdfSFQ1STdQM00
Click to expand...
Click to collapse
Do you have P10 offline firmware? It is VTR-L29C636 version.
Hi,
Can someone help me rebrand from BKL-L09 (C432) to BKL-L09 (C636)?
I have 2 Honor view 10 phones (originally BKL-AL20) that are rebranded by the shop were I bought them to BKL-L09. Unfortunetly they are stuck on an old version!
Current SW:
BKL-L09 8.0.0.110(C432)
But since they are not getting updates I was planning on flashing complete OTA update but I think rather flash C636. Or is some other region more recommended?
Can someone please provide me with steps and files to flash C363?
I also have a Mate 8 were I recently rebranded from C432 to DL00 and I only needed to flash the DL00 oeminfo and then went to erecovery and downloaded/installed latest firmware from there without any other steps. Would this work for the Honor view 10 if i get the C636 oeminfo for it?
Best Regards,
Leo
Yes the rebrand is same on view 10, flashing oeminfo file and flash regarding ROM.
But there's a major problem here: there is no more free way to unlock the bootloader.
Even if your device is unlocked, if you rebrand it, most prolly you will lost the unlock status and your unlock code wont work.
Means you need to pay third party unlock service (again).
I'm on right opposite from you, having C636 (im on EMUI9 with stock recovery so i cant provide you a oeminfo file), thinking of rebranding to C432.
Why would you like to move to C636 (Asia Other, means SEA and some)? C432 (Europe Unlock) is quite nice region I think?
Europe is the most huawei selling region except china mainland, receiving most updates as i know.
If you are living in asia you can try India region, which is also quite update-receiving region i think.
TASON42 said:
Yes the rebrand is same on view 10, flashing oeminfo file and flash regarding ROM.
But there's a major problem here: there is no more free way to unlock the bootloader.
Even if your device is unlocked, if you rebrand it, most prolly you will lost the unlock status and your unlock code wont work.
Means you need to pay third party unlock service (again).
I'm on right opposite from you, having C636 (im on EMUI9 with stock recovery so i cant provide you a oeminfo file), thinking of rebranding to C432.
Why would you like to move to C636 (Asia Other, means SEA and some)? C432 (Europe Unlock) is quite nice region I think?
Europe is the most huawei selling region except china mainland, receiving most updates as i know.
If you are living in asia you can try India region, which is also quite update-receiving region i think.
Click to expand...
Click to collapse
Well the reason I want to do anything at all is because the phones are not receiving any updates. Both phones are stuck at 8.0.0.110.
You might be right, my earlier experience was that Europe did not get that much love as China/Asia. But I maybe should try to get phones updated. Problem is I have tried and nothing works. I tried built in update, HiSuite, HiCare and dload method.
I really y don't know why it fails, probably something went wrong when the phones were rebranded by the shop.
Sent from my HUAWEI NXT-DL00 using Tapatalk
Leo_83 said:
Well the reason I want to do anything at all is because the phones are not receiving any updates. Both phones are stuck at 8.0.0.110.
I really y don't know why it fails, probably something went wrong when the phones were rebranded by the shop.
Click to expand...
Click to collapse
Did you try the No-check recovery? Mine was fishy too (rebranded by the shop, no OTA came),
so i did clean 'ROM' flash with No-check recovery and clean 'ROM+all other things' flash with HiSuite.
TASON42 said:
Did you try the No-check recovery? Mine was fishy too (rebranded by the shop, no OTA came),
so i did clean 'ROM' flash with No-check recovery and clean 'ROM+all other things' flash with HiSuite.
Click to expand...
Click to collapse
No I never heard about No-check recovery.
Will have to search for that.
Sent from my HUAWEI NXT-DL00 using Tapatalk
Now I'm thinking of flashing stock recovery via fastboot (in case something is wrong with it) and then try flash stock rom rom via fastboot.
I found the following for recovery https://forum.xda-developers.com/honor-view-10/how-to/stock-recovery-getting-to-stock-t3754797
The question is what need to be done to flash stock rom?
I guess downloading stock from FF, what files are need for fastboot flash this device?
Sent from my HUAWEI NXT-DL00 using Tapatalk
Leo_83 said:
Now I'm thinking of flashing stock recovery via fastboot (in case something is wrong with it) and then try flash stock rom rom via fastboot.
I found the following for recovery https://forum.xda-developers.com/honor-view-10/how-to/stock-recovery-getting-to-stock-t3754797
The question is what need to be done to flash stock rom?
I guess downloading stock from FF, what files are need for fastboot flash this device?
Sent from my HUAWEI NXT-DL00 using Tapatalk
Click to expand...
Click to collapse
download stock ROM from FF, extract SYSTEM.img, via fastboot: fastboot flash system SYSTEM.img.
straight and simple. in fact you can flash most of .img by this, kind of manual HiSuite.
you did dload method (using stock recovery to flash stock ROM) and failed,
which might means your IMEI is not matching with your region properly (the shop rebranded it wrong),
so i recommended No-check Recovery, which is Modded stock recovery that does not check IMEI while dload process.
TASON42 said:
download stock ROM from FF, extract SYSTEM.img, via fastboot: fastboot flash system SYSTEM.img.
straight and simple. in fact you can flash most of .img by this, kind of manual HiSuite.
you did dload method (using stock recovery to flash stock ROM) and failed,
which might means your IMEI is not matching with your region properly (the shop rebranded it wrong),
so i recommended No-check Recovery, which is Modded stock recovery that does not check IMEI while dload process.
Click to expand...
Click to collapse
I download two .zip files from FF,they are update.zip and update_full_BKL-AL20_all_cn.zip, then I unzip the two zip files,but i can't get SYSTEM.img .How can I do. Thank you!
[email protected] said:
I download two .zip files from FF,they are update.zip and update_full_BKL-AL20_all_cn.zip, then I unzip the two zip files,but i can't get SYSTEM.img .How can I do. Thank you!
Click to expand...
Click to collapse
unzip the update.zip. find update.app
extract system.img from update.app via huawei update extracter (kinda named program)
TASON42 said:
unzip the update.zip. find update.app
extract system.img from update.app via huawei update extracter (kinda named program)
Click to expand...
Click to collapse
Thank you,I got the SYSTEM.img.My phone is honor V10 BKL_AL20,the Vendor now is 8.0,if I flash the SYSTEM .img from Android 9.0 update.zip for honor V10,do the Vendor will also be changed to 9.0?Thank you.
Credit-
@oslo83 for the big help.
@OldDroid for EMUI Flasher tool.
@ante0 his tricks worked when I ended up with incorrect build number
WARNING-
Do not try to debrand from cn/all to other variant as that may lead to FRP lock status.
Do not reboot after flashing the oeminfo or it may brick the phone.
i.e. once oeminfo is edited, phone may brick :
- if device is rebooted with its original region stock firmware
- if wrong region firmware is selected in EMUI FLASHER
- if downgrading
- if flashing wrong packages
Prerequisites-
Unlocked and Rooted Honor 8X (root from here)
Backup of your data via Hisuite or TB backup or other tools.
Files for the new model (JSN-L21/L42 variant)
Free Storage around 8 GB space.
Downloads-
EMUI Flasher from here or here
OEMINFO binary from here
For JSN-L42 Indian version
Main update zip here
Data zip here
(Optional) Public Zip here
For JSN-L21 EU version
Main zip here
Data zip here
(Optional) Public zip from here ​
Procedure-
Root your phone using this guide
Install EMUI flasher downloaded but do not run it. (just click on done once installed)
Copy the firmware to internal memory
copy oeminfo binary to internal memory
on PC, go to adb folder, shift+right click, open command prompt here and type -
Code:
adb shell
su (please grant root on your phone at this step)
mkdir /data/local/tmp
mv /sdcard/oeminfo /data/local/tmp
cd /data/local/tmp
chmod +x oeminfo
./oeminfo JSN-L21 C432 hw/eu (if you want to debrand to EU version)
./oeminfo JSN-L42 C675 hw/in (if you want to debrand to Indian version)
Run the EMUI flasher app you installed earlier, give root persmission.
It will prompt for download of a file around 26 MB (no-check recovery), install it.
Select the respective firmwares from you internal memory based on the region you want to debrand/rebrand to (Update.zip, update_full_JSN-L21_hw_eu.zip and update_data_full_public.zip or update.zip, update_full_JSN-L42_hw_in.zip and update_data_full_public.zip
Click on the arrow or download symbol and EMUI flasher will start flashing the firmwares. (may take 10 minutes)
It may take few minutes to complete the update procedure in recovery, device will reboot automatically and will perform the factory reset.
once booted, your phone should be on the new region.
Thanks, i will try
Thanks. Any oeminfo???
Mewwo said:
Thanks. Any oeminfo???
Click to expand...
Click to collapse
Yes any oeminfo as long as you are putting correct model number and device code
Hello, can I rebrand Honor 8X AL00a? If you know, tell me how, please.
It's working on JSN-L22C636???
natsusii said:
It's working on JSN-L22C636???
Click to expand...
Click to collapse
Yes
chermosh said:
Hello, can I rebrand Honor 8X AL00a? If you know, tell me how, please.
Click to expand...
Click to collapse
It should. Process will remain the same
chermosh said:
Hello, can I rebrand Honor 8X AL00a? If you know, tell me how, please.
Click to expand...
Click to collapse
I'm looking for the same
Can debranding JSN-L21 to JSN-L22C636 ???
Need oeminfo of JSN-L22C636????
shashank1320 said:
WARNING-
Do not try to debrand from cn/all to other variant as that may lead to FRP lock status.
Click to expand...
Click to collapse
So no JSN-AL00? I have a JSN-AL00 128/6 that needs a rebrand...
Yir said:
So no JSN-AL00? I have a JSN-AL00 128/6 that needs a rebrand...
Click to expand...
Click to collapse
You can try. should work fine if followed correctly. Which region you want to rebrand to?
natsusii said:
Can debranding JSN-L21 to JSN-L22C636 ???
Need oeminfo of JSN-L22C636????
Click to expand...
Click to collapse
You can..No need. it will just be a command change for this step to C636 and instead of EU the correct one followed by correct firmware flash.
./oeminfo JSN-L21 C432 hw/eu
natsusii said:
Can debranding JSN-L21 to JSN-L22C636 ???
Need oeminfo of JSN-L22C636????
Click to expand...
Click to collapse
Update- I dont see any Oreo firmware for this model yet on firmware finder. it may be on easy firmware or other site.
shashank1320 said:
You can try. should work fine if followed correctly. Which region you want to rebrand to?
Click to expand...
Click to collapse
to anything but chinese, probably. International should be fine. My only worries are that the different firmware wont work with the different hardware.
Yir said:
to anything but chinese, probably. International should be fine. My only worries are that the different firmware wont work with the different hardware.
Click to expand...
Click to collapse
We dont have firmware for global model. EU or Indian should work fine for you.
My 8x is stuck in honor logo and then resets itself.. I can access e Recover. Any way to fix this?
MiyuChandria said:
My 8x is stuck in honor logo and then resets itself.. I can access e Recover. Any way to fix this?
Click to expand...
Click to collapse
What did you do before this happened ?
miststudent2011 said:
What did you do before this happened ?
Click to expand...
Click to collapse
I did the steps and flashed the L42 files and it worked out fine, and the font was reverted to its original. Then I repeated the steps again and it no longer boots. It can only reach the honor logo and it restarts itself.
MiyuChandria said:
I did the steps and flashed the L42 files and it worked out fine, and the font was reverted to its original. Then I repeated the steps again and it no longer boots. It can only reach the honor logo and it restarts itself.
Click to expand...
Click to collapse
Why did you repeat those steps ? Any specific reason ?