Hello, i have a big doubt about unlock my Mate 9.
I have read some guides but i'am confused, i will not lose the warranty and i see that with software dc-unlocker is possible relock the bootloader at original status, it is right? there are other softwares that do same job?
Sorry for my bad english.
thanks for help
Khris00 said:
Hello, i have a big doubt about unlock my Mate 9.
I have read some guides but i'am confused, i will not lose the warranty and i see that with software dc-unlocker is possible relock the bootloader at original status, it is right? there are other softwares that do same job?
Sorry for my bad english.
thanks for help
Click to expand...
Click to collapse
There's a difference between lock and relock.
Relock will say 're-locked' in the bootloader, and that's probably voiding warranty.
You can get it to say 'locked' by flashing official firmware, you have a few options here...
1. Firmware Finder
2. Flash update guide
3. Dload method (only for C636B136 and AL00C00B115)
4. FunkyHuawei (paid)
5. Dc unlocked (i think anyway, and paid)
ante0 said:
There's a difference between lock and relock.
Relock will say 're-locked' in the bootloader, and that's probably voiding warranty.
You can get it to say 'locked' by flashing official firmware, you have a few options here...
1. Firmware Finder
2. Flash update guide
3. Dload method (only for C636B136 and AL00C00B115)
4. FunkyHuawei (paid)
5. Dc unlocked (i think anyway, and paid)
Click to expand...
Click to collapse
thanks for answer
So is possible change the status just flashing the stock firmware? is so simple?
i need to do then unlock bootloader>>install modded recovery>>flash modded rom. For return to the stock firmware and bootloader locked what i need to do? i flash the stock firmaware but the twrp remain?
thanks
Khris00 said:
thanks for answer
So is possible change the status just flashing the stock firmware? is so simple?
i need to do then unlock bootloader>>install modded recovery>>flash modded rom. For return to the stock firmware and bootloader locked what i need to do? i flash the stock firmaware but the twrp remain?
thanks
Click to expand...
Click to collapse
No. When you flash stock firmware everything is back to stock. If there was a way to flash a modified update.zip with Twrp as recovery instead of stock recovery it would be possible. But as far as I know we can't yet. I've tried to repack using Huawei Update extractor but it doesn't want to, header mismatch. (this is on all extracted files, not just twrp)
The only reason to get locked bootloader would be if you needed to return the phone because of a software error. If it's hardware it should be replaced anyway.
ante0 said:
There's a difference between lock and relock.
Relock will say 're-locked' in the bootloader, and that's probably voiding warranty.
You can get it to say 'locked' by flashing official firmware, you have a few options here...
1. Firmware Finder
2. Flash update guide
3. Dload method (only for C636B136 and AL00C00B115)
4. FunkyHuawei (paid)
5. Dc unlocked (i think anyway, and paid)
Click to expand...
Click to collapse
ante0 said:
No. When you flash stock firmware everything is back to stock. If there was a way to flash a modified update.zip with Twrp as recovery instead of stock recovery it would be possible. But as far as I know we can't yet. I've tried to repack using Huawei Update extractor but it doesn't want to, header mismatch. (this is on all extracted files, not just twrp)
The only reason to get locked bootloader would be if you needed to return the phone because of a software error. If it's hardware it should be replaced anyway.
Click to expand...
Click to collapse
thanks for help Ante and sorry for my newbie questions, i will just flash one mod rom instead a stock i have now(B182) because i don't like emui, but if is possible when i'll go to sell i can back to stock condition and warranty Ok, i can do that?
thanks
Khris00 said:
thanks for help Ante and sorry for my newbie questions, i will just flash one mod rom instead a stock i have now(B182) because i don't like emui, but if is possible when i'll go to sell i can back to stock condition and warranty Ok, i can do that?
thanks
Click to expand...
Click to collapse
Yep. Flashing stock firmware will do that.
You won't get rid of emui though. We don't have AOSP so emui is always there...
ante0 said:
Yep. Flashing stock firmware will do that.
You won't get rid of emui though. We don't have AOSP so emui is always there...
Click to expand...
Click to collapse
you mean all modded roms are emui based?
Khris00 said:
you mean all modded roms are emui based?
Click to expand...
Click to collapse
Yes.
And there are only 2. RomAur and Ephemeral
ante0 said:
Yep. Flashing stock firmware will do that.
You won't get rid of emui though. We don't have AOSP so emui is always there...
Click to expand...
Click to collapse
ante0 said:
Yes.
And there are only 2. RomAur and Ephemeral
Click to expand...
Click to collapse
thanks again
ante0 said:
There's a difference between lock and relock.
Relock will say 're-locked' in the bootloader, and that's probably voiding warranty.
You can get it to say 'locked' by flashing official firmware, you have a few options here...
1. Firmware Finder
2. Flash update guide
3. Dload method (only for C636B136 and AL00C00B115)
4. FunkyHuawei (paid)
5. Dc unlocked (i think anyway, and paid)
Click to expand...
Click to collapse
sorry for my bad thing. But can i ask you help me this case:
i have Mate 9 Pro LON-L29C636C361 (lastest Oreo ) , but my bootloader is unlocked, and maybe not have stock recovery .
So, which method can flash again full rom C361 (3 file : update.zip, data full, hw...etc) and complete back to stock with locked bootloader???
I read somewhere about method LON-HWOTA, but it fail when flash TWRP step, because i am on Oero, so this method can not use in this my case . Can you show me another way ?
to relock bootloader on Android 8 (MUI8), only works if you have your CORRECT oeminfo.bin. make sure you backup yours before rebranding
1. just flash TWRP
2. make folder folder HWOTA8 on SD card
3. Download HWOTA8 and copy "hwota8_rebrand" to SDcard
4. Copy your oeminfo.bin file to HWOTA8 folder.. Make sure to rename your file to oeminfo.bin
5. Boot into TWRP and install from SDcard hwota8_rebrand
Done bootloader relocked
Related
Hi everyone, please help me I read so much post on xda and I don't know how to re lock or lock the bootloader and back from android 7.0 to 6.0. The only modifications I do to my honor 8 FRD-L04 C567 B360 is I unlocked the bootloader and installed via fastboot TWRP 3.0.2 but this version can't flash only read function is operating. So I flash via fastboot the original recovery for my version extracted from the full package of android 6 MM. So I tried to install the full firmware via dload method but the system tell me is that not the correct version to my phone and I'm sure is the correct version. I still do not re lock the bootloader because I read that some people had a brick left after the re lock process. I need to sell my phone because of I need to pay debts. Please help me to restore my phone as new.
ZicoRamirez77 said:
Hi everyone, please help me I read so much post on xda and I don't know how to re lock or lock the bootloader and back from android 7.0 to 6.0. The only modifications I do to my honor 8 FRD-L04 C567 B360 is I unlocked the bootloader and installed via fastboot TWRP 3.0.2 but this version can't flash only read function is operating. So I flash via fastboot the original recovery for my version extracted from the full package of android 6 MM. So I tried to install the full firmware via dload method but the system tell me is that not the correct version to my phone and I'm sure is the correct version. I still do not re lock the bootloader because I read that some people had a brick left after the re lock process. I need to sell my phone because of I need to pay debts. Please help me to restore my phone as new.
Click to expand...
Click to collapse
Look up FRD-L04 Rollback package
Get that, extract to dload folder, flash
After that is done, put full package in dload folder, flash
Sent from my FRD-L04 using XDA-Developers Legacy app
This is for all the process or just for back from android 7 to android 6?
ZicoRamirez77 said:
This is for all the process or just for back from android 7 to android 6?
Click to expand...
Click to collapse
This Will take you back to 6, relock bootloader. Everything
Sent from my FRD-L04 using XDA-Developers Legacy app
IlluminaTimmy said:
This Will take you back to 6, relock bootloader. Everything
Click to expand...
Click to collapse
Thank you my friend, I'll do the roll back in a few hours and I tell you it all works perfectly. Thanks again
The Rollback
ZicoRamirez77 said:
Thank you my friend, I'll do the roll back in a few hours and I tell you it all works perfectly. Thanks again
Click to expand...
Click to collapse
Did the roll back work?!!
Whin77 said:
Did the roll back work?!!
Click to expand...
Click to collapse
Yes my friend, but first off all, I do the rollback 75 MB aproximelity via dload method, next to do that I have to re lock the bootloader via fastboot with the unlock code. And to finish, I install the full software of Android marshmallow via dload method (make sure that the software is in the micro SD, not in the intern memory) 3.70 GB aproximelity. My phone was like new.
Awesome
Great to hear! I managed to work out my issue with mine! I appreciate your response!
Just passing by, this is the wrong forum to post to. Here is everything related to development, not Q&A. Flagging this thread. Sorry.
Hi
since i flash my update rom android 7.0
i have two Boot Animation
first is for honor
second is huawei
how remove second one?
plz help me
Try to clean flash your firmware through dload method, trying to be accurate while flashing. Something surely went bad while flashing the update you're talking about. Maybe you flashed the 7.0 for another variant, and now it messed up the firmware. Go on hwmt.ru site -> firmware database, and recover your ROM update package.
You have to pay attention and flash ONLY packages that matches your build number first 9 characters. Like "BLN-L21C432Bxxx", for example, will work only on a BLN-L21C432Bxxx. Flash only packages with PV at the end of the name.
RedSkull23 said:
Try to clean flash your firmware through dload method, trying to be accurate while flashing. Something surely went bad while flashing the update you're talking about. Maybe you flashed the 7.0 for another variant, and now it messed up the firmware. Go on hwmt.ru site -> firmware database, and recover your ROM update package.
You have to pay attention and flash ONLY packages that matches your build number first 9 characters. Like "BLN-L21C432Bxxx", for example, will work only on a BLN-L21C432Bxxx. Flash only packages with PV at the end of the name.
Click to expand...
Click to collapse
tanks but is there any way to fix it without flashing rom
because i already opened my bootloader and installed twrp
now i cant relock it
because when i relock it rom dosent load
& i have to relock it again & restore from twrp
(does d load metod need locked bootloader?or i can do it with twrp)
hamijan said:
tanks but is there any way to fix it without flashing rom
because i already opened my bootloader and installed twrp
now i cant relock it
because when i relock it rom dosent load
& i have to relock it again & restore from twrp
(does d load metod need locked bootloader?or i can do it with twrp)
Click to expand...
Click to collapse
my bootloader unlocked and load metod worked for me
aixabdennour said:
my bootloader unlocked and load metod worked for me
Click to expand...
Click to collapse
Tanks dude
The problem was twrp
I flashed stock recovery & problem solved!!?
hamijan said:
Tanks dude
The problem was twrp
I flashed stock recovery & problem solved!!
Click to expand...
Click to collapse
now i flashed stock rom with dload method
and i cant flash twrp recovery
i flash it and it says finished
bit when i hold volume up & power stock recovery start!
what should i do?
is there other way to root than twrp?
(bln-l21c185b361)
hamijan said:
now i flashed stock rom with dload method
and i cant flash twrp recovery
i flash it and it says finished
bit when i hold volume up & power stock recovery start!
what should i do?
is there other way to root than twrp?
(bln-l21c185b361)
Click to expand...
Click to collapse
Refer rooting guide for 6X and emui 5 in my signature. Dont use other files
shashank1320 said:
Refer rooting guide for 6X and emui 5 in my signature. Dont use other files
Click to expand...
Click to collapse
Tanks man??
Problem solved
hamijan said:
Tanks man??
Problem solved
Click to expand...
Click to collapse
Glad to know. Enjoy rooted phone :silly:
Hi, is It possible to relock bootloader for to have warranty back?
Thanks
once you flash the stock img, it will be locked again.
Till Nougat, we had dload method which locks it fully (other method for unlocking it would just re-lock it)
shashank1320 said:
once you flash the stock img, it will be locked again.
Till Nougat, we had dload method which locks it fully (other method for unlocking it would just re-lock it)
Click to expand...
Click to collapse
Hey, i am in the same situation and after flashing the stock rom + stock recovery my bootloader is still unlocked, and i still get that "This device has been unlocked and can't be trusted" screen on boot.
Is there any way to manually lock the bootloader?
Edit: i found this SRKTool and i was able to easily relock the bootloader. You need the Unlock code though and it resets your phone, so backup your data.
https://forum.xda-developers.com/mate-8/development/tool-srk-tool-huawei-t3369797 @alboz83
Arrandale said:
Hey, i am in the same situation and after flashing the stock rom + stock recovery my bootloader is still unlocked, and i still get that "This device has been unlocked and can't be trusted" screen on boot.
Is there any way to manually lock the bootloader?
Edit: i found this SRKTool and i was able to easily relock the bootloader. You need the Unlock code though and it resets your phone, so backup your data.
https://forum.xda-developers.com/mate-8/development/[email protected]
Click to expand...
Click to collapse
Yes it will only relock the bootloader but not lock. Anyone experienced with this can get this that you had unlocked your bootloader earlier
Arrandale said:
Hey, i am in the same situation and after flashing the stock rom + stock recovery my bootloader is still unlocked, and i still get that "This device has been unlocked and can't be trusted" screen on boot.
Is there any way to manually lock the bootloader?
Edit: i found this SRKTool and i was able to easily relock the bootloader. You need the Unlock code though and it resets your phone, so backup your data.
https://forum.xda-developers.com/mate-8/development/tool-srk-tool-huawei-t3369797 @alboz83
Click to expand...
Click to collapse
I relocked yesterday bootloader and my relocated easily. I can not find the update of stock firmware. Once found update. I clicked on update, update failed. I have not got the update since then. So I did relock. Very easy to relock. But my mobile update is not happening. Please give me some help
Sent from my [device_name] using XDA-Developers Legacy app
shashank1320 said:
once you flash the stock img, it will be locked again.
Till Nougat, we had dload method which locks it fully (other method for unlocking it would just re-lock it)
Click to expand...
Click to collapse
Many people say that if we flash stock rom the bootloader stay unlock. Or i have to flash in a particular mode?
With the tool i can relock but not lock, right?
alboz83 said:
Many people say that if we flash stock rom the bootloader stay unlock. Or i have to flash in a particular mode?
With the tool i can relock but not lock, right?
Click to expand...
Click to collapse
Yup
i Read somewhere that if u flash the stock rom using dload after u have relocked the bootloader, the bootloader status will change from relock to locked. does this work? can anyone try and confirm this? i want to make sure of this before i unlock. I would be greatful forever.
Thanks
Anzee said:
i Read somewhere that if u flash the stock rom using dload after u have relocked the bootloader, the bootloader status will change from relock to locked. does this work? can anyone try and confirm this? i want to make sure of this before i unlock. I would be greatful forever.
Thanks
Click to expand...
Click to collapse
Have tried to this more than 100 times and it works fine. It will be locked BL rather than relock
shashank1320 said:
Have tried to this more than 100 times and it works fine. It will be locked BL rather than relock
Click to expand...
Click to collapse
If u flash stock?
Thank you thank you thank you you're a life saver ♥
Anzee said:
If u flash stock?
Thank you thank you thank you you're a life saver ♥
Click to expand...
Click to collapse
Yes. Did you solve the BL state?
shashank1320 said:
Yes. Did you solve the BL state?
Click to expand...
Click to collapse
No I haven't even unlocked the bl yet. I just wanted to make sure it the relock to lock state was possible before I unlock. I will do so soon when I get some time.
Anzee said:
No I haven't even unlocked the bl yet. I just wanted to make sure it the relock to lock state was possible before I unlock. I will do so soon when I get some time.
Click to expand...
Click to collapse
Yes you can always do via full ota or flashing the stock firmware via dload. Not hard to do to retain warranty:silly:
shashank1320 said:
Have tried to this more than 100 times and it works fine. It will be locked BL rather than relock
Click to expand...
Click to collapse
But dload method not work only for a single update.app file? With view 10 there are 3 files
alboz83 said:
But dload method not work only for a single update.app file? With view 10 there are 3 files
Click to expand...
Click to collapse
Use the first file, update.zip. it will contain a update.app file around 3 GB. Can use this single file.
shashank1320 said:
Use the first file, update.zip. it will contain a update.app file around 3 GB. Can use this single file.
Click to expand...
Click to collapse
Really? And I have to install over the same firmware, not an update? For example, now I'm on 162 build with unlock bootloader. If I install only update.zip of 162 build with dload method, I obtain the lock bootloader?
alboz83 said:
Really? And I have to install over the same firmware, not an update? For example, now I'm on 162 build with unlock bootloader. If I install only update.zip of 162 build with dload method, I obtain the lock bootloader?
Click to expand...
Click to collapse
Yes.
hello all guys!
i have honor 10 (now col-l29)
before rebranding (col-tl10)
may i relock the BL safety?? i have official rom
ecsalos said:
hello all guys!
i have honor 10 (now col-l29)
before rebranding (col-tl10)
may i relock the BL safety?? i have official rom
Click to expand...
Click to collapse
Why you want to relock, to gain warranty?
If so, better dload the current firmware and it will lock it safely.
because, i dont want to see everytime when i reboot my phone,this stupid message, who tells me that i have unlock bl...
i have 8.1.0.151 (c432)
i was downloaded this version when im trying to rebranding.. for official site..
if i relock with this version, the worse scenario it will be...??? brick???
if i dload the current firmware, i will install it with TWRP again? and after it will be locked safety?
and what firmware i must to dload?
hi, anyone has some kind of advice to flash old firmware as the newest have a lot of problems in terms of camera quality ? i don't have rooted my pixel 7 pro ...
Albi Lukaj said:
hi, anyone has some kind of advice to flash old firmware as the newest have a lot of problems in terms of camera quality ? i don't have rooted my pixel 7 pro ...
Click to expand...
Click to collapse
You can install the OTA update from here. Just follow the instructions Google provided at the top of the page and you should be all updated. It's only the full images that require the bootloader to be unlocked.
Just go look up factory images for Pixel phones. You can install firmware right from the web browser. You don't need to have root. Root is optional.
Do you mean without an unlocked bootloader? Root is not the same thing and does not determine how you can flash firmware.
If your bootloader is unlocked, you can use the Android Flash Tool. If your bootloader is not unlocked, downgrading is impossible.
UltimateGamer83 said:
Just go look up factory images for Pixel phones. You can install firmware right from the web browser. You don't need to have root. Root is optional.
Click to expand...
Click to collapse
This only works if OEM Unlocking is enabled in Developer Options.
V0latyle said:
Do you mean without an unlocked bootloader? Root is not the same thing and does not determine how you can flash firmware.
If your bootloader is unlocked, you can use the Android Flash Tool. If your bootloader is not unlocked, downgrading is impossible.
This only works if OEM Unlocking is enabled in Developer Options.
Click to expand...
Click to collapse
so i just need to unlock the bootloader and then i can install old firmware following the procedure ?
Albi Lukaj said:
so i just need to unlock the bootloader and then i can install old firmware following the procedure ?
Click to expand...
Click to collapse
Yes
Albi Lukaj said:
so i just need to unlock the bootloader and then i can install old firmware following the procedure ?
Click to expand...
Click to collapse
@Albi Lukaj, Please be aware that unlocking your bootloader WILL WIPE YOUR DEVICE AND RETURN IT TO STOCK!!!
If that is not preferable, you might try applying the OTA like stated in Post #2, but I am not sure if it works downgrading a version (it probably doesn't)...
I want to relock bootloader, but will I get brick if I lock bootloader with old stock ROM installed on device?
Look inside here:
Lock BootLoader after Rooting?
Thanks for taking time to read my query. I was wondering if I've to lock boot-loader after rooting ( I just rooted my Oero) and before looking can I take everything backup on titanium backup and then restore everything after locking ? I'm I...
forum.xda-developers.com
jwoegerbauer said:
Look inside here:
Lock BootLoader after Rooting?
Thanks for taking time to read my query. I was wondering if I've to lock boot-loader after rooting ( I just rooted my Oero) and before looking can I take everything backup on titanium backup and then restore everything after locking ? I'm I...
forum.xda-developers.com
Click to expand...
Click to collapse
I know that if I install modified ROM and lock bootloader I will get a brick. But will I get a brick if i install official (stock) ROM but old version and then lock bootloader? For example, I installed stock ROM (not modified) with Android 10, but the latest is Android 11 then I locked bootloader. Will I get a brick?
jwoegerbauer said:
Look inside here:
Lock BootLoader after Rooting?
Thanks for taking time to read my query. I was wondering if I've to lock boot-loader after rooting ( I just rooted my Oero) and before looking can I take everything backup on titanium backup and then restore everything after locking ? I'm I...
forum.xda-developers.com
Click to expand...
Click to collapse
The question is, can I lock the bootloader with the old version of the official firmware installed without getting a brick. Because the old version of the firmware works smoother.
Locking a bootloader doesn't affect ROM actually installed: Lock or Unlock will wipe your data, that's all.
jwoegerbauer said:
Locking a bootloader doesn't affect ROM actually installed: Lock or Unlock will wipe your data, that's all.
Click to expand...
Click to collapse
So can I install old version of fw? I heard something about rollback protection.
Oybek78 said:
So can I install old version of fw? I heard something about rollback protection.
Click to expand...
Click to collapse
You still, or I didn´t find, that you mention the model of your device, that´s matter to have the right answer.
Also, it depends on which method you used to flash the ROM, if you officially, flashed the ROM, and the rollback didn´t affect your device, then it won´t do, locking or unlocking it.
Oybek78 said:
So can I install old version of fw? I heard something about rollback protection.
Click to expand...
Click to collapse
The stock ROM can be installed on the phone at any time. Mostly via ADB / Fastboot tools.
SubwayChamp said:
You still, or I didn´t find, that you mention the model of your device, that´s matter to have the right answer.
Also, it depends on which method you used to flash the ROM, if you officially, flashed the ROM, and the rollback didn´t affect your device, then it won´t do, locking or unlocking it.
Click to expand...
Click to collapse
My phone is Sony Xperia 1 J9110. I flashed it officially to the latest ROM through settings. Then I unlocked the bootloader and flashed the old stock ROM via newflasher. Then I decided to relock the bootloader with old stock ROM installed. Does this mean that I will get my phone bricked if I lock the bootloader with old stock ROM actually installed?
jwoegerbauer said:
The stock ROM can be installed on the phone at any time. Mostly via ADB / Fastboot tools.
Click to expand...
Click to collapse
But can I lock the bootloader with old stock ROM installed?
I saw somewhere that if you lock the bootloader with the old firmware version, you may get brick. But I'm not sure about that.
Why steadily repeat your posts?
FYI: I hereby opt out of this thread.
jwoegerbauer said:
Why steadily repeat your posts?
FYI: I hereby opt out of this thread.
Click to expand...
Click to collapse
Because you answered me
Oybek78 said:
My phone is Sony Xperia 1 J9110. I flashed it officially to the latest ROM through settings. Then I unlocked the bootloader and flashed the old stock ROM via newflasher. Then I decided to relock the bootloader with old stock ROM installed. Does this mean that I will get my phone bricked if I lock the bootloader with old stock ROM actually installed?
Click to expand...
Click to collapse
Yes, always that you flash a stock ROM, you can re-lock it, fastboot will erase the data as a security measurement.