Hey guys,
Just got my Dbrand skin set, but I'm kinda scared to use it right now because it doesn't have any protection for the screen, I ordered screen protectors which I will cut so that they will fit together with the Dbrand, but don't know how to do it.
Does anyone have experience with Dbrand and screen protectors and could give me some advice?
I've installed 4 dbrand skins on my pixel now but never the screen protectors. I always had a tempered glass protector on. The screen protector seems like it might start peeling up in the corner areas over time after pulling in and out of your pocket. Do you have a case over the skin too? I have the wrap around skin and .35mm Cali case on mine and it fits really snug.
Deleted
presence_unknown said:
I've installed 4 dbrand skins on my pixel now but never the screen protectors. I always had a tempered glass protector on. The screen protector seems like it might start peeling up in the corner areas over time after pulling in and out of your pocket. Do you have a case over the skin too? I have the wrap around skin and .35mm Cali case on mine and it fits really snug.
Click to expand...
Click to collapse
Well I do have a case, but after applying Dbrand I don't want to use it anymore. Did you install your dbrand over your tempered glass protector or are you using it without one?
Related
I currently have Seido Innocase 2 and I just put on a clarviue screen protector. The case lifts up screen protector, are there any good screen protectors + the case that doesnt do this?
Thanks
Best case at www.case-mate.com. I use the tough case and it's on sale last time I checked.
For screen, l use the anti glare screen protector from www.boxwave.com
I heard that the tough cases attract dust like crazy though..
Also black & black out of stock
Case-mate Barely there + Clarivue Screen protector here. I don't use the case all the time, but when I do - no problems with the screen protector.
xxsashixx said:
I currently have Seido Innocase 2 and I just put on a clarviue screen protector. The case lifts up screen protector, are there any good screen protectors + the case that doesnt do this?
Thanks
Click to expand...
Click to collapse
I have the innocase 2 for my nexus one. With any screen protector that you use with the innocase 2 you are going to run into problems. I have tried a few different screen protectors from different manufacturers and i always run into the same problem, the case ends up lifting up the screen protector or if i do end up getting the case on without the screen protector lifting up, a bubble will form at one of the edges. the innocase 2 is such a tight fit, it's just a problem with the screen protectors.
i do like my innocase 2 and from all the marks it has, it has protected my nexus well for which my nexus has not one scratch and looks brand new. i have just learned to deal with the problem of the innocase 2 and screen protector.
xxsashixx said:
I heard that the tough cases attract dust like crazy though..
Also black & black out of stock
Click to expand...
Click to collapse
i have one and i've been using it for a week, don't have a dust problem...and what i did to get black and black; order the shell and the silicone separately...they ship at the same time and it still comes in one box with a free screen protector
xxsashixx said:
I heard that the tough cases attract dust like crazy though..
Also black & black out of stock
Click to expand...
Click to collapse
The black n black combo- i.e black toughcase set is out of stock but u can buy the hard cover and gel cover both in black separately and it costs the same as the case itself- i jus ordered mine a few days back but since i'm not in US i've to wait for 3-4 weeks
eagerly waiting tho!
I've had a Tough Case since May and it's not a dust magnet.
I recently got a case from Incipio for my Nexus One and I love it. It fits perfectly and it feels very durable. The case itself is made of two parts - a silicone "glove" that goes on first, and a plastic one that goes on the outside. It feels very sturdy and hardy.
I'm also using a Clarivue screen protector (anti-glare one), and the case doesn't disturb it at all.
I can't post a link since I'm a newbie (I love the case so much that I'm coming out from under my rock and making this reply ), but you can search for "Incipio Google Nexus One SILICRYLIC Hard Shell Case with Silicone Core."
Hope this helps!
Anybody use one of the tempered glass protectors with TPU cases, or other cases you have to pop on and off? When I tried to use PET screen protectors with my Diztronic case, it just peeled up the corners and ruined the protector.
I'd like to put a tempered glass protector on, but the Diztronic has to come off regularly to remove dust. Will it cause fit problems or peel away/fracture the glass when I try to put the case back on? Suggestions in general for protection without getting some kinda bulky Commuter case are welcome as well. I feel like some kind of case is pretty necessary, as opposed to a skin, because I use my phone in a lot of gritty, dirty places, and while I don't drop it often, if it does go down, it's typically onto concrete. It's survived the past two years pretty much unscathed, but I want to keep it as my daily driver for at least a few more months.
royalewihcheese said:
Anybody use one of the tempered glass protectors with TPU cases, or other cases you have to pop on and off? When I tried to use PET screen protectors with my Diztronic case, it just peeled up the corners and ruined the protector.
I'd like to put a tempered glass protector on, but the Diztronic has to come off regularly to remove dust. Will it cause fit problems or peel away/fracture the glass when I try to put the case back on? Suggestions in general for protection without getting some kinda bulky Commuter case are welcome as well. I feel like some kind of case is pretty necessary, as opposed to a skin, because I use my phone in a lot of gritty, dirty places, and while I don't drop it often, if it does go down, it's typically onto concrete. It's survived the past two years pretty much unscathed, but I want to keep it as my daily driver for at least a few more months.
Click to expand...
Click to collapse
TGSPs are typically smaller than plastic film ones, to ensure that they'll work with cases. I have the Redpepper TGSP on my Nexus 4, and it fits with all my cases, including a Diztronic.
I'm having Distronic TPU case and glass screen protector on my mom's N4, as there is a curve on the front panel the screen protectors would usually be even smaller than the actual screen.
And I'm having totally no problem with the screen protector and the case, except the uncovered thickness of the glass screen protector makes it relatively more noticeable than a plastic one.
Ordered this off eBay and its great. Covers the whole glass on the phone and does NOT have the halo effect around the glass but only near the home button which isn't much. The borders are black to possibly hide the halo, and or parts of the glass that isn't touching the screen itself. Pictures were taken on a Nexus 5 so you know where I'm getting at.
http://www.ebay.com/itm/23154906205...49&var=530790694087&ssPageName=STRK:MEBIDX:IT
Here are the pictures. I'll post the eBay link in just a bit.
Is that the Araree brand one?
I guess its REMAX, but I don't know why OP didn't gave the link when he opened this thread.
http://www.ebay.co.uk/itm/REMAX-Bra...9?pt=LH_DefaultDomain_186&hash=item1c542b5dd3
droidhd said:
I guess its REMAX, but I don't know why OP didn't gave the link when he opened this thread.
http://www.ebay.co.uk/itm/REMAX-Bra...9?pt=LH_DefaultDomain_186&hash=item1c542b5dd3
Click to expand...
Click to collapse
Just added the link. This one doesn't seem to have a brand but they may all come from the same factory with different branding.
hii .. how does the phone fit in a case ? does the edges of the screen protector get pushed by the case ?
Is that really full cover? edge cover?
It does cover edges but i would like to see one on gold s6. Also to OP, how is around home button now?
The glass covers the entire front of the phone. The camera, proximity sensor and wraps around the home button. I haven't tested it with other cases besides the ringke slim case and it is just fine. I'm guessing it should be fine with others as well. There is no portion of the front glass exposed with this on except for this home button and the ear speaker.
Sent from my SM-G920T using Tapatalk
Does the glass stick all the way to the edges? Or is it more like my Nillkin Glass protection is?
Along the entire phones edges the glass protection will not stick all the way. It makes it look like ****.
Maybe all glass protection is like this?
corb06 said:
Does the glass stick all the way to the edges? Or is it more like my Nillkin Glass protection is?
Along the entire phones edges the glass protection will not stick all the way. It makes it look like ****.
Maybe all glass protection is like this?
Click to expand...
Click to collapse
Yes, all the way to the edge. It has a black border around the edges so if there is any halo effect, you cannot see it. I've tested it with both the Ringke Fusion and Slim case and it's not pushing the screen protector up. I imagine some cases may lift the protector.
Thanks, just ordered one.
Nillkin has an even cooler tempered glass protector, look here:
Definitely going to check this out in black
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=1&cid=1&scid=33&id=5045&page=1
http://www.nillkin.com/uploads//2015040719354873499.jpg
I'm wondering if the Spigen Neo Hybrid and/or the Slim Armor/Tough Armor would push up this all-around protector.
How much of a lip does the Ringke Fusion/Slim have?
Great just what i was looking for!
Thanks for sharing OP
asdfvtn said:
I'm wondering if the Spigen Neo Hybrid and/or the Slim Armor/Tough Armor would push up this all-around protector.
How much of a lip does the Ringke Fusion/Slim have?
Click to expand...
Click to collapse
My guess is this will get pushed up just as much as the other full cover edge to edge screen protectors from Nikllin, UTLK, & Collreall, since it still goes to the edge of the phone. I cannot imagine this one is any thinner than the others to not cause problems.
For the Spigen Neo Hybrid, I think you are stuck with the screen protectors that only cover the screen and not to the edge, or the PET protectors.
Blooody marvellous!!
Cameron_S said:
My guess is this will get pushed up just as much as the other full cover edge to edge screen protectors from Nikllin, UTLK, & Collreall, since it still goes to the edge of the phone. I cannot imagine this one is any thinner than the others to not cause problems.
For the Spigen Neo Hybrid, I think you are stuck with the screen protectors that only cover the screen and not to the edge, or the PET protectors.
Click to expand...
Click to collapse
My guess as well. It does wrap all around the phone and the glass is edge to edge unlike others. It may lift with other protectors who have a lip around the screen. Its a great protector and wanted to share with everyone here since we are all looking for one that covers the whole front glass and this is it.
Sent from my SM-G920T using Tapatalk
After giving up for now on tempered glass, I put a film screen protector on my phone.
I have a Spigen TPU case but when I put it on it pushes the film off the glass.
I have tried several times but the result is always the same.
Has anyone put a film screen protector on their phone and found a case that will not mess with it?
Spigen Thin Fit + Xtremeguard wet app worked lovely on my S7 edge. Have the same case, just waiting on my Skinomi to arrive for the Note 7. Poor baby has been sitting in a box since last Thursday
The glass back is slippery and is getting scratches very easily. This protector from the Gadgetshieldz is saving my OnePlus 6 glass back and screen from scratches. The protector is fitting well and all the holes are perfect.
Important part is, its providing lot of grip to the OP6 which is very slippery without the protector. Might go for a Tempered Glass for the screen if I find a decent one but the back protector is a keeper. Take a look at the images of the protectors applied on my OP6. Can't go wrong with these for a low price.
{Mod edit: Link removed!}
Looks good.
I also got one for back and sides as I've got a tempered glass screen protector for front.
One question
Can I still put on a tpu soft case at the back on top of it?
Hunkman said:
The glass back is slippery and is getting scratches very easily. This protector from the Gadgetshieldz is saving my OnePlus 6 glass back and screen from scratches. The protector is fitting well and all the holes are perfect.
Important part is, its providing lot of grip to the OP6 which is very slippery without the protector. Might go for a Tempered Glass for the screen if I find a decent one but the back protector is a keeper. Take a look at the images of the protectors applied on my OP6. Can't go wrong with these for a low price.
{Mod edit: Link removed!}
Click to expand...
Click to collapse
Heyy man, how is the screen protector holding ? Can you pic couple of pics with your turned on ? Thanks!
Xebeck said:
Looks good.
I also got one for back and sides as I've got a tempered glass screen protector for front.
One question
Can I still put on a tpu soft case at the back on top of it?
Click to expand...
Click to collapse
Yes depends on how much of a lip the case has to "grab" the front of the phone.