Ordered this off eBay and its great. Covers the whole glass on the phone and does NOT have the halo effect around the glass but only near the home button which isn't much. The borders are black to possibly hide the halo, and or parts of the glass that isn't touching the screen itself. Pictures were taken on a Nexus 5 so you know where I'm getting at.
http://www.ebay.com/itm/23154906205...49&var=530790694087&ssPageName=STRK:MEBIDX:IT
Here are the pictures. I'll post the eBay link in just a bit.
Is that the Araree brand one?
I guess its REMAX, but I don't know why OP didn't gave the link when he opened this thread.
http://www.ebay.co.uk/itm/REMAX-Bra...9?pt=LH_DefaultDomain_186&hash=item1c542b5dd3
droidhd said:
I guess its REMAX, but I don't know why OP didn't gave the link when he opened this thread.
http://www.ebay.co.uk/itm/REMAX-Bra...9?pt=LH_DefaultDomain_186&hash=item1c542b5dd3
Click to expand...
Click to collapse
Just added the link. This one doesn't seem to have a brand but they may all come from the same factory with different branding.
hii .. how does the phone fit in a case ? does the edges of the screen protector get pushed by the case ?
Is that really full cover? edge cover?
It does cover edges but i would like to see one on gold s6. Also to OP, how is around home button now?
The glass covers the entire front of the phone. The camera, proximity sensor and wraps around the home button. I haven't tested it with other cases besides the ringke slim case and it is just fine. I'm guessing it should be fine with others as well. There is no portion of the front glass exposed with this on except for this home button and the ear speaker.
Sent from my SM-G920T using Tapatalk
Does the glass stick all the way to the edges? Or is it more like my Nillkin Glass protection is?
Along the entire phones edges the glass protection will not stick all the way. It makes it look like ****.
Maybe all glass protection is like this?
corb06 said:
Does the glass stick all the way to the edges? Or is it more like my Nillkin Glass protection is?
Along the entire phones edges the glass protection will not stick all the way. It makes it look like ****.
Maybe all glass protection is like this?
Click to expand...
Click to collapse
Yes, all the way to the edge. It has a black border around the edges so if there is any halo effect, you cannot see it. I've tested it with both the Ringke Fusion and Slim case and it's not pushing the screen protector up. I imagine some cases may lift the protector.
Thanks, just ordered one.
Nillkin has an even cooler tempered glass protector, look here:
Definitely going to check this out in black
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=1&cid=1&scid=33&id=5045&page=1
http://www.nillkin.com/uploads//2015040719354873499.jpg
I'm wondering if the Spigen Neo Hybrid and/or the Slim Armor/Tough Armor would push up this all-around protector.
How much of a lip does the Ringke Fusion/Slim have?
Great just what i was looking for!
Thanks for sharing OP
asdfvtn said:
I'm wondering if the Spigen Neo Hybrid and/or the Slim Armor/Tough Armor would push up this all-around protector.
How much of a lip does the Ringke Fusion/Slim have?
Click to expand...
Click to collapse
My guess is this will get pushed up just as much as the other full cover edge to edge screen protectors from Nikllin, UTLK, & Collreall, since it still goes to the edge of the phone. I cannot imagine this one is any thinner than the others to not cause problems.
For the Spigen Neo Hybrid, I think you are stuck with the screen protectors that only cover the screen and not to the edge, or the PET protectors.
Blooody marvellous!!
Cameron_S said:
My guess is this will get pushed up just as much as the other full cover edge to edge screen protectors from Nikllin, UTLK, & Collreall, since it still goes to the edge of the phone. I cannot imagine this one is any thinner than the others to not cause problems.
For the Spigen Neo Hybrid, I think you are stuck with the screen protectors that only cover the screen and not to the edge, or the PET protectors.
Click to expand...
Click to collapse
My guess as well. It does wrap all around the phone and the glass is edge to edge unlike others. It may lift with other protectors who have a lip around the screen. Its a great protector and wanted to share with everyone here since we are all looking for one that covers the whole front glass and this is it.
Sent from my SM-G920T using Tapatalk
Related
What the pros and cons of tempered glass screen protector vs a Film screen protector?
My concern about the Tempered glass is that :
--it's adhesive is only on the bezel area and since sgs4 have smaller bezel so it might get detached easily
--Tempered Glass might scratch the glass beneath it
--If adhesive of the Tempered glass became less sticky Dust might accumulate inside
So can you tell me your experience with tempered glass screen protector? I really want to hear from someone who used this screen protector for long time and not on these reviews on youtube since they only used it on the time they review it.
And also does anyone tried using combination of Film and T.glass protectors?
i never bothered because they're so expensive and i screw up the screen anyways so the film type are more easily replaceable
ill probably end up buying 2 or 3 cases and end up using only screen protectors in most situations lol.
to me i rarely drop my phone but i have trouble keeping it out of my pocket with my keys and change, other things. ive been pretty good about it but not perfect.
First off my only problem with tempered glass on my S3 was that it messed with screen responsiveness... Now the ones for the S4 are mostly half the thickness of last years so that should help that problem a lot. The iLoome protector fort the S4 is fully clear and I assume it has adhesive over the entire surface. The sense of mind you get with glass is great. Plus the feel of glass is much better than that of other screen protectors. If you can find one that doesn't take away from screen sensitivity than i'd say it's definitely worth it if you care about your phone.
Sent from my GS3
ichilouch said:
What the pros and cons of tempered glass screen protector vs a Film screen protector?
My concern about the Tempered glass is that :
--it's adhesive is only on the bezel area and since sgs4 have smaller bezel so it might get detached easily
--Tempered Glass might scratch the glass beneath it
--If adhesive of the Tempered glass became less sticky Dust might accumulate inside
So can you tell me your experience with tempered glass screen protector? I really want to hear from someone who used this screen protector for long time and not on these reviews on youtube since they only used it on the time they review it.
And also does anyone tried using combination of Film and T.glass protectors?
Click to expand...
Click to collapse
I have a "Flexible Glass Screen Protector" on my S3 that has adhesive all across the back. I have only removed it once in the couple month's that I've had it. I have not encountered any dust getting between the two pieces of glass. The adhesion has not deteriorated any either. I am very happy with it and I really am hoping I will be able to locate one for my S4. The only draw back that I have found is that the thicker protector limits the cases you can use. My favorite cover before I got the protector was the Seidio Surface case and it no longer can be used. I also like my Otterbox Defender case and I was able to "squeeze" it on after I removed the plastic protector that came on the cover. It's a tight fit, but it does work.
KeithSr said:
I have a "Flexible Glass Screen Protector" on my S3 that has adhesive all across the back. I have only removed it once in the couple month's that I've had it. I have not encountered any dust getting between the two pieces of glass. The adhesion has not deteriorated any either. I am very happy with it and I really am hoping I will be able to locate one for my S4. The only draw back that I have found is that the thicker protector limits the cases you can use. My favorite cover before I got the protector was the Seidio Surface case and it no longer can be used. I also like my Otterbox Defender case and I was able to "squeeze" it on after I removed the plastic protector that came on the cover. It's a tight fit, but it does work.
Click to expand...
Click to collapse
What Brand did you use and how thick was it?
ichilouch said:
What Brand did you use and how thick was it?
Click to expand...
Click to collapse
I got it from GlassZone and I believe it is 6mm, I will have to look for my old email confirmation.
KeithSr said:
I got it from GlassZone and I believe it is 6mm, I will have to look for my old email confirmation.
Click to expand...
Click to collapse
It isn't 6mm thick, that would be +70% the thickness of the entire phone! lol
Maybe 0.6mm, that would still be very thick for a screen protector.
Spigen film is the way to go... $14 for two protectors and easy to install...
Just watched a review of the Spigen Glas.tR and it is also CLEAR!
Sent from my GS3
I had a glass protector on my GS3 (XGear Spectre, I think) and it worked fine - no loss of sensitivity. It did allow some tiny dust in, but it was easy to lift and wipe it out the couple of times it happened over 8 months. And the week before my S4 came in, I managed to drop the S3 on its face...the screen protector cracked, and the phone is still perfect. Looking at the Spigen one next week just because of that.
Asmodian3 said:
It isn't 6mm thick, that would be +70% the thickness of the entire phone! lol
Maybe 0.6mm, that would still be very thick for a screen protector.
Click to expand...
Click to collapse
Okay, I found the ad for the flexible glass protector. I ordered it on eBay, this one is very similar even though it is for the Note 2: http://www.ebay.com/itm/Samsung-Gal...193&pid=100040&prg=1011&rk=1&sd=230950051927&
I love this screen protector and am hoping that I will be able to get one for the new S4.
---------- Post added at 12:21 PM ---------- Previous post was at 12:08 PM ----------
I also had the one everyone was talking about at this thread: http://forum.xda-developers.com/showthread.php?t=1920757
But, like someone said previously, it had adhesive only on the outside edges and dust or dirt could get underneath the protector.
I ended up breaking it on the corner when I removed it to clean beneath it.
That does look like a nice one.
I bought the Spigen Slim Glass screen protector and I am 100% satisified. Zero less in screen sensitivity and it feels smooth as, well, glass
bobbydsiu said:
I bought the Spigen Slim Glass screen protector and I am 100% satisified. Zero less in screen sensitivity and it feels smooth as, well, glass
Click to expand...
Click to collapse
That's awesome. Which one did you get? .TR or .T? I didn't like the one for the s3 but apparently this one is better as the adhesive is all over.
thacounty said:
That's awesome. Which one did you get? .TR or .T? I didn't like the one for the s3 but apparently this one is better as the adhesive is all over.
Click to expand...
Click to collapse
I got the tr, I think its the thinner of the two. Its definitely fully adhesive, I love it.
spigen GLAS.tr for what phone?
bobbydsiu said:
I got the tr, I think its the thinner of the two. Its definitely fully adhesive, I love it.
Click to expand...
Click to collapse
Spigen GLAS.t SLIM = non-rounded borders - (0.23mm) - thinner
Spigen GLAS.tR SLIM = rounded borders (0.4mm)
You're correct the t is the thinner material. Either way it feels great and installs fairly easily.
I had the glas for the s2, I LOVED(easy to clean the screen of finger oils) it, however, it attracted dust underneath the screen protector due to adhesive being only at the edges, I took it off after a couple of months. With the full adhesive, i will definitely buy again for my soon to arrive S4. Especially since I just dropped my s2 face down on the ground and broke the screen a couple weeks back (without case), the glas would serve as a shield.
Are there any curved/wet install screen protectors that will fit round the curved edges of the S6 or is a glass one the way forward?
I am clumsy and outdoors lots so would want some proection and it seems a lot of the plastic protectors only just about cover the screen.
I was very satisfied with the Spigen non-glass screen protector. It covered almost all of the screen, which surprised me. I only took it off because I prefer glass protectors.
Spigen screen protectors leave gaps around the border. Not as much as glass sp. This is to accommodate "case friendly" design.
HKSpeed said:
I was very satisfied with the Spigen non-glass screen protector. It covered almost all of the screen, which surprised me. I only took it off because I prefer glass protectors.
Click to expand...
Click to collapse
Interesting! I thought I read it only just covered the screen? Does it overlap slightly? Maybe it was earlier version!
JayX2A said:
Interesting! I thought I read it only just covered the screen? Does it overlap slightly? Maybe it was earlier version!
Click to expand...
Click to collapse
No screen protector I know of covers more than the screen. Are you using a case? If yes, which one?
HKSpeed said:
No screen protector I know of covers more than the screen. Are you using a case? If yes, which one?
Click to expand...
Click to collapse
Not got the phone yet - was pre ordering bits! I don't mean the whole front of the phone. On the spigen website it shows the protector being slightly wider than the display, but review I read elsewhere seem to have it cut quite narrow and it barely covers the active part of the screen.
This is the Spigen plastic screen protector I ordered below. I always use a case and it covers most of the screen. There's a tiny gap, but I wasn't bothered by it.
http://www.amazon.com/gp/product/B00QU4N0EI
A case option is the Spigen Ultra Hybrid FX case. Its the $17.99 option in the link below. It covers the entire phone (front, back, edges). Then you don't need a screen protector.
http://www.amazon.com/gp/product/B00QU4PN84
Reviews and photos of it: http://www.amazon.com/gp/customer-reviews/RT1Z3ENHAIQ8Z and http://www.amazon.com/gp/review/RDXA8F1JMNCI4
Below is a review of the case for an iPhone 6. It's in Japanese, but you get the idea. There's no S6 video review available.
Despite my comments in this thread, I'm not a Spigen fanboy LOL. I no longer use the Spigen screen protector (I have a no-name glass now) and I'm swapping my Spigen case for a Ringke Fusion.
HKSpeed said:
This is the Spigen plastic screen protector I ordered below. I always use a case and it covers most of the screen. There's a tiny gap, but I wasn't bothered by it.
http://www.amazon.com/gp/product/B00QU4N0EI
A case option is the Spigen Ultra Hybrid FX case. Its the $17.99 option in the link below. It covers the entire phone (front, back, edges). Then you don't need a screen protector.
http://www.amazon.com/gp/product/B00QU4PN84
Reviews and photos of it: http://www.amazon.com/gp/customer-reviews/RT1Z3ENHAIQ8Z and http://www.amazon.com/gp/review/RDXA8F1JMNCI4
Below is a review of the case for an iPhone 6. It's in Japanese, but you get the idea. There's no S6 video review available.
Despite my comments in this thread, I'm not a Spigen fanboy LOL. I no longer use the Spigen screen protector (I have a no-name glass now) and I'm swapping my Spigen case for a Ringke Fusion.
Click to expand...
Click to collapse
Have the Fusion on my Nexus - pretty good but teh back is coming away from the sides now. Like the look of the Rinke slim though.
Got some Spigen ones, they are pretty close to the size of the screen. Have to be so careful to line it up properly! Shame they didnt make it that fraction bigger, but I guess that was not possible due to the screen curve.
Ordered spiegen ones too, from amazon, 2 protectors wtih shipping costed 16.70€ but i have always dreamed of getting rid of that thick and heavy tempered protector.... they really do add weight and thickness to phone, especially if you decide to put front and back tempered protectors
Duzzy5 said:
Ordered spiegen ones too, from amazon, 2 protectors wtih shipping costed 16.70€ but i have always dreamed of getting rid of that thick and heavy tempered protector.... they really do add weight and thickness to phone, especially if you decide to put front and back tempered protectors
Click to expand...
Click to collapse
I was tryiing to find a 0.2mm glass one as the thread on here has that as the best one - but they donn't ship to UK
They're hard to find, I've seen a few on ebay.com but there are some glass protectors that will cover almost all of the phone. They're the ones that go over the buttons with a pass-through for the fingerprint sensor/home button. They have an entirely identical full front look. Like this one, but not edge of course, they make them for flat S6s too but the flat ones being the ones that are hard to find: http://www.ebay.com/itm/Samsung-Gal...hash=item4d3e1f582c:m:mF-rpmie8VK2iab6MR9K5EQ
benjmiester said:
They're hard to find, I've seen a few on ebay.com but there are some glass protectors that will cover almost all of the phone. They're the ones that go over the buttons with a pass-through for the fingerprint sensor/home button. They have an entirely identical full front look. Like this one, but not edge of course, they make them for flat S6s too but the flat ones being the ones that are hard to find: http://www.ebay.com/itm/Samsung-Gal...hash=item4d3e1f582c:m:mF-rpmie8VK2iab6MR9K5EQ
Click to expand...
Click to collapse
Ordered a couple of super cheap 0.26mm ones that I found online.
https://www.replacebase.co.uk/samsu...or-0-2mm-ultra-clear-with-oleophobic-coating/
Arrived yesterday and look ok - will see how they go on and if there are any halo issues.
JayX2A said:
I was tryiing to find a 0.2mm glass one as the thread on here has that as the best one - but they donn't ship to UK
Click to expand...
Click to collapse
I have a SUPER thin tempered glass screen protector for the front and back of my s6. On the back it is quite large so it has the halo but on the front it is cut so it just about covers the actual display bit, so there is no halo on the front. It covers the samsung logo at the top and the capacitive buttons at the bottom like any other screen protector. Both costs me £2.49 on eBay UK. After using a much thicker tempered glass screen protector on my s3 I would say that the thicker ones feel as if they would offer better drop protection.
I purchased a Seidio Surface and Tech Armor clear screen protectors. The problem is that the screen protector fits nearly edge to edge. The pressure from the new double insulated surface cases causes the screen protector to bubble/lift/bunch on the edge in certain places.
I used some scissors to trim the screen protector with some success.
Does anyone have a recommendation for a screen protector that fits within the edges of Seidio Surface?
Thanks.
I purchased the intelliarmor case friendly tempered glass for mine. I have a surface case on the way so I will try these in a couple days and post back.
Sent from my SM-T320 using Tapatalk
Are you speaking of film protectors right? By the way how do you like the case? Im trying to decide between the seidio surface and the speck. Are the volume buttomes or power buttons hard to press?
Must be. Unless he trimmed Tempered Glass with his scissors!
aknotts415 said:
Are you speaking of film protectors right?
Click to expand...
Click to collapse
aknotts415 said:
Are you speaking of film protectors right? By the way how do you like the case? Im trying to decide between the seidio surface and the speck. Are the volume buttomes or power buttons hard to press?
Click to expand...
Click to collapse
I have always used Seidio surfaces cases specifically because they looked good, slim, and they provided decent protection (offered a holster option).
The problem I have found after about 5 phones (Gnex (2), Moto X 2013 (2), S4 (2), and the N6) is that they actually hurt the phone. When I say hurt, they create these little scuffing marks where ever the case comes in contact with the phone. This comes from fine dust/sand and dirt that gets in between the case and phone. I had good results with my N6 as I would take the case off once a week and clean/blow the case/phone.
My Nexus 6 looks good, but not perfect after about 6 months.
I *think* Seidio is on to this effect as all the new phones have a dual TPU soft shell and hard shell. I am hopeful this fixes this issue.
Regarding the buttons, they are harder to press and not perfect. It is certainly functional and not a big issue to me. You do notice it. It doesn't bother me that much since the phone turns on by the finger sensor anyway. I really never use the power button anymore.
Raydee35 said:
I purchased the intelliarmor case friendly tempered glass for mine. I have a surface case on the way so I will try these in a couple days and post back.
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
Anything to report?
bunklung said:
Anything to report?
Click to expand...
Click to collapse
The Seidio case and IntelliArmor tempered glass screen protector are a near perfect match. There is just a tiny edge between the glass and the case so you don't have to worry about the case pushing on the glass protector. The glass itself is very nice, I purchased some cheaper tempered glass protectors from Ebay and you can really see the difference. They are very clear and even though they do show fingerprints and smudges, they are way less noticeable than the cheaper protectors I bought.
Stumbled upon this and thought it may be good to share with the members here.
https://www.amazon.com/Protector-Nillkin-Anti-Explosion-Hardness-Tempered/dp/B01J1D7RTI
Bought one and tried - verdict: it's less prone to fingerprints. Now I'll be looking for a bumper case next
Does it lift on the sides? I have their front screen protector and it lifts on the edges.
Bought one from http://m.aliexpress.com/item/32701520282.html
And it was probably even easier to set up than the front. Unfortunately it does lift on the edges as well. I have yet to find one that doesn't have that effect. Then again the 2.5d glass makes it difficult like that.
An alternative
Hello people of honor
I found a very cheap alternative back protector on ali today.
https://www.aliexpress.com/item/2-P...-8-Clear-Ultra-Thin-Slim-Fit/32756887262.html
It says the material is carbon fibre. According to pictures, it's partialy transparent. Also it should help with grip (hearing the phone is very slipery, still awaiting mine). The question is, how will it look on the phone. Could be somewhere betweeen good and an absolute abomination.
I ordered one today, I'll post here when I get mine (and my phone) if I remember & won't feel lazy.
Ohhhh that actually looks nice! Looking forward to seeing how it looks.
Is there a completely clear thin back film? I just want one to protect from scratches while still using a case
Notchr302 said:
Is there a completely clear thin back film? I just want one to protect from scratches while still using a case
Click to expand...
Click to collapse
The link from OP does come with front and back layer.
faizalotai said:
The link from OP does come with front and back layer.
Click to expand...
Click to collapse
Tempered glass is NOT what I'm looking for. That's intended to use without a case. I need the old standard thin protector to leave no bulk while still using a case
Notchr302 said:
Tempered glass is NOT what I'm looking for. That's intended to use without a case. I need the old standard thin protector to leave no bulk while still using a case
Click to expand...
Click to collapse
My bad..lol
mine using this one
https://www.amazon.com/gp/product/B01J1D7KU4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
the back layer thinner than front 0.3mm layer
I bought nillkin 0.2mm tempered glass protector for the front and it also came with a plastic protector for the back. I bought the carbon fiber back protector and it is garbage. The hole cutouts are off and it doesn't stick to the back that well. I'm just using the one included with nillkin.
Which one do you recommend for the S10e? Right now I'm still using the default protector which was applied by Samsung, but I don't really like it.
i ordered one on ebay but i have a feeling it's flat not edge to edge full cover for 10e. They use generic photoshopped stock photo for all 3 models and claim it's curved. I think 10e has 2.5D edge. Not completely flat. I'm also using the garbage thin film they included. For $800 scumsung could include high quality glass and case. I also ordered glass for rear cameras. Never seen or used one before. Not sure what to expect.
tried ESR tempered glass and MP mall tempered glass from amazon
both do not stick on side, ESR is off by like 0.75 mm because of 2.5D curve of glass, it does not stick on side. so dont waste your money on these two, i am still looking for one may be just a bit smaller than ESR.
temporarily ordering a film protector till i find a tempered glass which fits right.
I'm using the PureGear HD Clear Tempered Glass Screen Protector https://www.amazon.com/dp/B07P7S174H/ref=cm_sw_r_cp_apa_i_byaHCbZY5Q1N0
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
Click to expand...
Click to collapse
how is touch sensitivity and does is create rainbow effect like some tempered glass with adhesive on side do?
Keep in mind aftermarket screen protecters (especially glass ones) will have problems with the fingerprint reader.
Im using the samsung one for now until some testing and revising is done
No rainbow effect and if you increase touch sensitivity in the settings it works great. I have no real complaints.
which non-glass protector do you guys recommend?
destz0r said:
which non-glass protector do you guys recommend?
Click to expand...
Click to collapse
I am interested as well, tried both ESR screen protectors and they were both too small for the screen. doesn't look like there is a clear favorite right now
DSX2 said:
Keep in mind aftermarket screen protecters (especially glass ones) will have problems with the fingerprint reader.
Im using the samsung one for now until some testing and revising is done
Click to expand...
Click to collapse
That's only for bigger models. S10E finger scanner is on the side.
Sent from my SM-G970U1 using Tapatalk
Why is there a lip or Ridge around perimeter of screen of galaxy s10e
Does anybody know why there is a lip or Ridge around the edges of Galaxy S10e screen it's almost looks like a screen protector has been applied from the factory
willdogg78 said:
Does anybody know why there is a lip or Ridge around the edges of Galaxy S10e screen it's almost looks like a screen protector has been applied from the factory
Click to expand...
Click to collapse
Yes, that's exactly what you are seeing. The S10e does indeed have a factory installed plastic screen protector. You can really feel it around the camera as there's a cutout for the camera. I would expect it to scratch rather quickly, plus I don't think it provides nearly as much drop protection as a tempered glass one might.
I'm following along here hoping that there does wind up being an economical tempered glass screen protector that works well and doesn't life at the edges. Seems like this will be similar to my S7, where I was never really able to find something that works and just went naked.
Thank you for the response I've just been so confused with everyone saying the S10 and S10+ have one but not the S10e. I think you're right it is just a polyurethane plastic protector. And just a heads up I tried to apply a tempered glass protector over top of it and it definitely made it hard for the edges to stick.
willdogg78 said:
Thank you for the response I've just been so confused with everyone saying the S10 and S10+ have one but not the S10e. I think you're right it is just a polyurethane plastic protector. And just a heads up I tried to apply a tempered glass protector over top of it and it definitely made it hard for the edges to stick.
Click to expand...
Click to collapse
I had the same confusion. All of the media I've seen say the pre-installed one is only on the S10 and S10+, but if you look around the camera on the S10e, there's clearly a cutout that confirms there is a pre-installed screen protector on there. I'm still not exactly sure how to get it off. I picked around the edges a bit and nothing is coming up easily.
I'm not sure how well the edges of a tempered glass one will stick even if you took off the pre-installed one. I haven't seen any reports of an economical one that works yet. I think I'm going to be in the same boat as I am with my S7 and be forced to go without one.
Follow
DarkMage619 said:
I'm using the PureGear HD Clear Tempered Glass Screen Protector https://www.amazon.com/dp/B07P7S174H/ref=cm_sw_r_cp_apa_i_byaHCbZY5Q1N0
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
Click to expand...
Click to collapse
If anyone looking for decent glass. This brand is good to go, but expensive. Might wait out a little.
Sent from my SM-G970U1 using Tapatalk
my factory installed screen protector is starting to show some scratches and wear. Getting near desperate trying to find a good affordable screen protector for the s10e
I ordered an Alinsea glass protector from amazon, sounds like a knock off of a Whitestone from their description. It doesn't have a cut out for the front facing camera, which is great, as a cut out just seems to collect pocket lint. I have not received it yet.
1
Tapatalkkal küldve az én SM-G970F eszközömről
freddie813 said:
I ordered an Alinsea glass protector from amazon, sounds like a knock off of a Whitestone from their description. It doesn't have a cut out for the front facing camera, which is great, as a cut out just seems to collect pocket lint. I have not received it yet.
Click to expand...
Click to collapse
I got one. First time doing an install of this type and given the barebones installation tools provided, it was above average difficultly. First one ended up with bubbles.