Got myself this tablet and it was bricked. So sadly I don't know what has been done with it.
When I got it, it was able to charge and go into Odin/Download mode but not recovery mode. I tried reflashing it with Odin using some official ROM because Odin mode said it had was using Official at that time.
Anyway, all my tries failed in Odin @ SetupConnection so theoretically I couldn't modify the tablet at all. Suddenly it wouldn't boot into normal Odin mode anymore.
Only thing it does right now, is boot into the yellow triangle screen ("Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."), even when I try to turn the tablet off.
Later, I gave up on my USB2 port and tried USB3 port. This time flashing ROM with Odin worked (well, it said PASS) but the tablet just shuts off and when I try to power it on later, it just goes back to yellow triangle screen.
Even tried to flash PIT file but it doesn't matter how much I beg it to do something cool, it doesn't work. Just says that there is no PIT partition.
Anyway, it's a GT-P5100 and should be Baltic version (SEB). Any ideas what to do?
Well I heard some users about using OMAP Flasher. No idea how to use it but you can do some research about it I guess...
Yup, I've seen it but didn't think it was my case because I saw pictures of device manager about it where they had OMAP device listed. I don't have it there. Device manager reports my device as something...Samsung...something.
But I will research it cause that seems to be the only thing I haven't looked at yet.
TheRealBosss said:
Yup, I've seen it but didn't think it was my case because I saw pictures of device manager about it where they had OMAP device listed. I don't have it there. Device manager reports my device as something...Samsung...something.
But I will research it cause that seems to be the only thing I haven't looked at yet.
Click to expand...
Click to collapse
Good luck! Report back here so you can help other users with their bricked tabs
https://forum.xda-developers.com/showthread.php?t=2186854 - Solved thread with the same problem as yours. You might wanna check this out
Sadly nothing works. Kinda gives me a feeling that I am dealing with a read-only memory
Won't waste any more time on this thing. Will return it.
Related
so yeah i got my first replacement after the first time this happened... i tried flashing krylon360's rom with odin but got a fail at factory.rfs. keep in mind i am in no way shape or form a noob with odin, i have brought many of my buddies' devices back to life, but for some reason even though i use a USB jig ( which works in my captivate and personally tested and working on the SGS4g before the unrecoverable soft brick) any help please i dont want to have to send it back to t-mobile again... they already charge 10bucks just for shipping.
muleman said:
so yeah i got my first replacement after the first time this happened... i tried flashing krylon360's rom with odin but got a fail at factory.rfs. keep in mind i am in no way shape or form a noob with odin, i have brought many of my buddies' devices back to life, but for some reason even though i use a USB jig ( which works in my captivate and personally tested and working on the SGS4g before the unrecoverable soft brick) any help please i dont want to have to send it back to t-mobile again... they already charge 10bucks just for shipping.
Click to expand...
Click to collapse
Hmm I'd say if the USB jig didn't work, you're not soft bricked. That's a hard brick.
What kind of USB jig are you using?
Was it a ROM or a kernel you flashed? which one, version etc.?
Jig - verified WORKING before the flash attempt
tried to flash [ROM-ODIN]T959VUVKB5 Stock + Root By: krylon360
new sgs4g
new USB cable
opened Odin first, set file
plugged in phone got a good port connection
clicked "Start"
failed at factory.rfs
phone--!--comp screen
unresponsive to JIG
donation rewards for anybody that can help! lol this is depressing, my old captivate isnt this sensitive and has been through hell and back, but this SGS4g.... im dissappointed in.
Uninstall all the drivers for the phone make sure you have the right ones also, and try plugging it into a usb 2.0 slot then run it again, this seemed to work for me. I ran into the same issue I plugged in my jig but it gave me a black screen, but odin recognized it and I flashedthe kd1 update and it was fixed. Hope this helps
muleman said:
Jig - verified WORKING before the flash attempt
tried to flash [ROM-ODIN]T959VUVKB5 Stock + Root By: krylon360
new sgs4g
new USB cable
opened Odin first, set file
plugged in phone got a good port connection
clicked "Start"
failed at factory.rfs
phone--!--comp screen
unresponsive to JIG
Click to expand...
Click to collapse
hold your horses... I got some news for you.
you can flash at that screen
try flashing mine again, or try white's ODIN image.
Along with what krylon said, maybe a bad download, try download file again
Sent from my SGH-T959V using XDA Premium App
will do thanks guys, ill try it tonight and let ya know how it goes for me.
i still dont get how odin gets a connection but the phone itself cannot with the jig... not logical but hey in the process of flashing now
krylon360 said:
hold your horses... I got some news for you.
you can flash at that screen
try flashing mine again, or try white's ODIN image.
Click to expand...
Click to collapse
youre the man.... Thanks much
muleman said:
i still dont get how odin gets a connection but the phone itself cannot with the jig... not logical but hey in the process of flashing now
Click to expand...
Click to collapse
Heimdall works at that same warning screen too. I've done it on my SGS4G.
I am confused..
sgyee said:
Heimdall works at that same warning screen too. I've done it on my SGS4G.
Click to expand...
Click to collapse
If the computer is not recognizing the phone being plugged in, how is ODIN going to be able to process? I don't know if mine SGS4G is irrepairable but when I plug it in to the computer, it will not even show up on device manager. The drivers have been installed in the past and I have used ODIN before.
When I try using ODIN now it won't work since it won't recognize the phone.
I have used JIG and simply will not buzz. It's pretty much as dead as if the phone is not even on.
Any help guys??
amishraa said:
If the computer is not recognizing the phone being plugged in, how is ODIN going to be able to process? I don't know if mine SGS4G is irrepairable but when I plug it in to the computer, it will not even show up on device manager. The drivers have been installed in the past and I have used ODIN before.
When I try using ODIN now it won't work since it won't recognize the phone.
I have used JIG and simply will not buzz. It's pretty much as dead as if the phone is not even on.
Any help guys??
Click to expand...
Click to collapse
If its currently in the state which I'm assuming..
-won't turn on, no sign of life period...
-plugging it in the wall charger won't even show the green battery status...
-won't get recognized when plugged into pc (or odin)...
-all combinations of buttons and battery pulling+usb cable plugging does nothing...
Yea I think its safe to say it went to a land far far away just like my friend's phone and only Samsung can revive it now.. Because I remember reading all the stories how everyone brought theres back to life so easily with the button combos or the jig usage, but those phones all at least showed a sign of life with that cable screen. But if its pitch black like I'm assuming then...
Same here. The jig didn't seem to work - I still got the cell + comp but odin worked anyway and reflashed stock. It's probably better to run Odin off a desktop if you have one.
That screen scared the holy hell out of me a couple of days ago. I ended up having to re-install the samsung drivers for windows 7 and then odin picked the phone right up. The reason I *knew* the phone was recoverable from that screen was simple, though:
I read the screen. It wouldn't be telling you to try something in Kies if you couldn't do anything at that screen. So, I just kept ****ing around trying different things until it worked.
*I* have personally noticed that that screen tends to come up when you accidentally or inadvertently select "Re-Partition" on a rom/image that's not setup for it, or if for any reason your phone gets disconnected or powered off during the flashing process.
That screen scared the holy hell out of me a couple of days ago. I ended up having to re-install the samsung drivers for windows 7 and then odin picked the phone right up. The reason I *knew* the phone was recoverable from that screen was simple, though:
I read the screen. It wouldn't be telling you to try something in Kies if you couldn't do anything at that screen. So, I just kept ****ing around trying different things until it worked.
*I* have personally noticed that that screen tends to come up when you accidentally or inadvertently select "Re-Partition" on a rom/image that's not setup for it, or if for any reason your phone gets disconnected or powered off during the flashing process.
Click to expand...
Click to collapse
I second this. I have been running into this screen while trying to install root from the 2.3.4 leak. I have had black screen, fuzzy screen, random pixel screen. In most cases I have been able recognize the phone using odin. A few of the key steps that I have used to get the phone recognizable in odin are:
1. If the computer says "usb not recognized" when initially plugging in the phone, uplug it and plug it back in. Most of the time when I do this the phone is recognized as samsung device.
1b: If odin now recognizes the phone after running through step 1 I will try to flash the files again. it will usually fail after trying to load the flash files on the first try. I have to mess around with this process a few times and I can usually get a successful flash.
2. I had an case when having to deal with this problem yesterday. I was running through steps 1,1b and not having success. Odin was hanging, (I forget which step). I let it sit for about 10 minutes and was still hanging. I unplugged the phone with odin still hanging pulled battery, powered on, plugged back in. Odin, which was still open and still trying to connect, continued its already started process after plugging it back in!!! This was an accident to still have the odin running and trying to connect, but after reconnecting the phone it successfully flashed!
*I* have personally noticed that that screen tends to come up when you accidentally or inadvertently select "Re-Partition" on a rom/image that's not setup for it, or if for any reason your phone gets disconnected or powered off during the flashing process.
Click to expand...
Click to collapse
These kind of observations are especially helpful! I can concur that I get the same <phone..!..pc> error, when odin tries to flash and gets a write fail, however, I do not have the "re-partition" option set. I then have to run through my previously mentioned steps to try to get a successful flash.
My question is what can i do to keep odin from failing to write when flashing?? I have only been using PDA packages, with the exception of using discrete packages (pit,csc,phone,pda) when loading the 2.3.4 rom leak.
It seems like the flashing write error in odin in causing the <phone..!..pc> error quite often with different flash processes. Does anyone have a solution to what might be causing this write error and what can be done to prevent this whole cycle? If so I sticky or new thread might be useful for other users. It has caused to have to warranty my first phone, urrrg!
Scariest feeling ever........ Not seeing your phone come up on Odin.
Sent from my SGH-T959V using XDA Premium App
Woops ahahahha. Was talkin to my friend. SOrry!
fvnktion said:
I second this. I have been running into this screen while trying to install root from the 2.3.4 leak. I have had black screen, fuzzy screen, random pixel screen. ..... [cut] ......
Click to expand...
Click to collapse
I had the same issue yesterday, when I tried to flash KD1 vanilla (stock) ROM
using ODIN, it failed the first 4 seconds, it boots into fuzzy looking screen and
that's it, every time I tried to boot it the fuzzy screen fades away to pitch black.
there is 2 possibilities that messed up the whole thing for me:
1) Bad ROM.. (i.e, can't be used with ODIN) although some members said it works
but don't know if there anything special to do before hand, if I want to downgrade.
2) Samsung Kies' fault, I installed just right before I used ODIN, and told me my
device is not registered.. hmm.
It could be both cases, but I suspect Kies the culprit, I had to uninstall it, and
uninstall the drivers came with it, installed the drivers found here in these forums,
and Odin recognized a COM port, although black screen on the phone, flashed
to KH1 and I am back to business. phew..
GB is awesome, but I can't stand the weak WIFI issue even with the latest KH1
I have to stand 3 feet away from my router to get a solid signal, with froyo
vanilla rom, I was able to connect like 50 feet away. but that's another problem
not for this thread.
Heh funny thing I read today in some thread, there is a conflict between Kies and
Odin after the incident happened. my fault for not reading a lot, jumping the gun
almost cost me the phone :/
i tried rooting my tab (GT-P3110) and in Odin it didn't showed pass, my tab rebooted and it showed an error saying "Firmware Upgrade encountered an issue..." i tried putting it in download mode to flash a new rom but it's stuck in that screen, i also tried putting it in recovery mode but it doesn't work either, is my tab totally bricked? can it still be fixed? i can't enter download mode or recovery mode, every time i turn it off it just goes back to the same screen and when i put the charger in, it still shows the same screen, help me please...thank you!
dhrexler said:
i tried rooting my tab (GT-P3110) and in Odin it didn't showed pass, my tab rebooted and it showed an error saying "Firmware Upgrade encountered an issue..." i tried putting it in download mode to flash a new rom but it's stuck in that screen, i also tried putting it in recovery mode but it doesn't work either, is my tab totally bricked? can it still be fixed? i can't enter download mode or recovery mode, every time i turn it off it just goes back to the same screen and when i put the charger in, it still shows the same screen, help me please...thank you!
Click to expand...
Click to collapse
I have the same problem, can some1 help?
I try using kies to fix the problem but the gt-p3110 is not supported when u go to Firmware upgrade and initilazation, put in the serial number from the back of your battery, then the tablet model and when u click ok is telling you that your model is not supported.
Can some1 tell me how to do it using Odin , even with complete wipe, or stock ROM.
Thx and please reply
"Firmware Upgrade encountered an issue..." = that´s the black screen of death. Download mode is enabled in this situation automaticly, no need to boot into downloadmode.
Uninstall Kies first! Maybe that´s why Odin failed! Maybe some Kies prozess running in the background.
Start Odin as Administrator,
Connect your tabelt to your PC (yes, with black screen of death!) - Odin will show "Added"
Now flash a Stockrom for your device
Safed your Tab
i did that with odin, untill it show'd pass but when i turn it on is the same
i loaded the file in the pda section,auto reboot and f.reset time boxes were checked
i used this http://www.hotfile.com/dl/182607797/b61e3af/P3110XXCLK7_P3110OXACLK7_BTU.zip.html from here http://forum.xda-developers.com/showthread.php?p=35095146 , the uk link
if u have a working method can you please tell me and live a link and how to do it?
thanks and please reply
maybe bad download? redownload a rom for your deivce e.g. from www.samsung-updates.com
Just did that , but is the same, I use Odin 3.07
Any more ideas?
Thanks
I notice this thread has been dead for some time. However, I am also in search of a possible solution to this as a colleague of mine passed one of these tablets on to me in the hope I could get some use out of it. It is in the same state as the previous posters claim, 'firmware encountered a problem.....'. Obviously I'm in a different situation as I did not buy this thing with my own money, not will I lose out if it is beyond repair. But I'm interested to solve this problem none the less.
So, so far I have attempted to flash a philztouch recovery using Odin which was unsuccessful and I have also tried to flash several compatible ROMs. All of which have failed, Odin confirming each time that the attempts were unsuccessful. I have read that the tablet in this state auto unlocks the bootloader, so I have ruled out that as a sticking point. I have read that flashing ROMs potentially won't work either as the corruption of the firmware is seated too deeply for this to have any effect. I know a possible solution is to try flash a new kernel as this goes a lot deeper, but this can be risky, however, like I mentioned above is not an issue for me as I have nothing to lose. Does anyone have any pointers on how to flash a new kernel? Surely there is a way to remove the corrupted firmware completely? I have to admit this is beyond the realm of anything I have used Odin for in the past. Also, I am more than aware some of my understanding may be incorrect so feel free to correct me. Any help would be greatly appreciated, even if it's just to point me in the right direction or towards some reference material which could shed some light on this particular problem.
Thanks in advance.
Hi,
I rooted my brandnew GT-P3110 with cf, flashed pacman and cwm recovery. I do not blame anybody alse for my issues but myself. I guess I messed up the restoring of NON-system-apps:
After a day of troublefree use the tablet randomly rebooted and came back with the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". No booting into recovery possible, no booting into download mode, no regular boot. Just the same message over and over again. Battery is unremovable.
I installed Kies, updated it, it downloaded drivers but under "emergency recovery" my tablet didn't appear. I then followed the "Firmware Upgrade and Initialization" procedure wich downloaded the necessary files but aborted with a korean text shown in the attachment after replugging the tablet. I tried this with 2 different USB-cables on several USB-ports. Kies btw asked me to remove the battery (not possible) after entering device number and serial-number. I turned off by pressing the off button instead and it turned on again.
I uninstalled Kies, rebooted, installed the samsung drivers manually, rebooted. I installed odin 1.85 (and later 1.3) and downloaded my contry's stock firmware (and later a newer version of the same firmware and another country's stock) from sammobile. I tried to flash them first without "repartition" ticked, later with it ticked but without a pit file (i can't find it!). I got four different errors, two are attached, the third was somethign like "cant write (line 1876)" and "cant write (line 1440)".I tried three stock firmwares with two version of odin with two USB cords on everal ports on ONE computer. I remove the tablet every time, exited odin every time, run it as admin, disabled firewall, xp-antispy and antivirus. I'm on Windows 7.
Besides a million other threads I found this one, but I wasn't able to solve my issue with it: http://forum.xda-developers.com/showthread.php?t=1652398
For 48 hours i tried to solve this problem by myself. Now I hope to find out if there's a point in continuing or if I can give up and throw away the piece of samsung.
Cheers,
404
android404 said:
Hi,
I rooted my brandnew GT-P3110
404
Click to expand...
Click to collapse
Try odin 1.61 1.85 sometimes itll jar it loose
vizionforever said:
Try odin 1.61 1.85 sometimes itll jar it loose
Click to expand...
Click to collapse
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
vizionforever said:
Try odin 1.61 1.85 sometimes itll jar it loose
Click to expand...
Click to collapse
Thanks but it didn't work.
wd5gnr said:
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
Click to expand...
Click to collapse
Mine is still bricked. Good luck.
facing same problem in my samsung tab 2 p3100 after root
wd5gnr said:
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
Click to expand...
Click to collapse
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
The stock ROM from sammobile. (http://www.sammobile.com/firmwares/2/)
The JB Bootloader
The stock JB kernel.
Opened odin v1.85.
Then i used the vol down+home+lock keys together to try to open the download mode ( but ended up in the "Firmware error " page) and connected phone to the pc. It shows "Added!" in the message box.
Repartition with the .pit and it will reboot.
Disconnect
Get into download mode and install the bootloader and it should reboot when done. Disconnect.
Get into download mode and connect
Installed the kernel through odin and reboot
Download mode again and install the ROM through odin.
If the phone gets stuck in boot loop (samsung logo over and over),
get into recovery mode ( for s2, vol up+home+lock, it needs to be pressed intermittently)
Then do a full format along with wipe cache.
And then the phone finally booted completely. :laugh: . Good Luck.
Note: I'm not sure to boot into recovery and download are the same key combos as it was for the i9100g.
novjean said:
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
Click to expand...
Click to collapse
Thanks. Well, I understand the theory. I have had trouble finding a PIT file that I am sure is for my device. I did save a PIT file but I think it is corrupt because using it requires me to let the battery die afterwards to get back to download mode. Same for the bootloader. I have a few things I've tried, but not sure I have one that is exactly for the GT-P5113 (in fact, I never did find a JB for the 5113 just the 5110 and it never would load).
Well no amount of coaxing has put life back into the tab
I may try again out of curiosity, but rather than invest more time I went out and bought a 32G Nexus 7 (2013 version). I would still like to get the Galaxy Tab alive again -- it has corrupted the flash twice before and each time I was able to bring it back to life. Not sure if this is an actual hardware failure or if it is just beyond partitioning.
I have a feeling if I had the right PIT and the right bootloader I could get back in business.
I can do each thing you mentioned, but my device is not getting detected by my PC. When I insert USB it says USB not recognized and it is not detected by Odin, adb and anything else. I am stuck on Boot Logo for my P3100 and when I go into recovery, it says USB not recognized. Fully messed up. Can you help me out here.
novjean said:
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
The stock ROM from sammobile. (http://www.sammobile.com/firmwares/2/)
The JB Bootloader
The stock JB kernel.
Opened odin v1.85.
Then i used the vol down+home+lock keys together to try to open the download mode ( but ended up in the "Firmware error " page) and connected phone to the pc. It shows "Added!" in the message box.
Repartition with the .pit and it will reboot.
Disconnect
Get into download mode and install the bootloader and it should reboot when done. Disconnect.
Get into download mode and connect
Installed the kernel through odin and reboot
Download mode again and install the ROM through odin.
If the phone gets stuck in boot loop (samsung logo over and over),
get into recovery mode ( for s2, vol up+home+lock, it needs to be pressed intermittently)
Then do a full format along with wipe cache.
And then the phone finally booted completely. :laugh: . Good Luck.
Note: I'm not sure to boot into recovery and download are the same key combos as it was for the i9100g.
Click to expand...
Click to collapse
2 years later .... did you ever unbrick this? I'm dealing with a P5113 now that's stuck at the "Firmware upgrade encountered an issue" screen. <sigh>
wd5gnr said:
Well no amount of coaxing has put life back into the tab
I may try again out of curiosity, but rather than invest more time I went out and bought a 32G Nexus 7 (2013 version). I would still like to get the Galaxy Tab alive again -- it has corrupted the flash twice before and each time I was able to bring it back to life. Not sure if this is an actual hardware failure or if it is just beyond partitioning.
I have a feeling if I had the right PIT and the right bootloader I could get back in business.
Click to expand...
Click to collapse
No. I finally sent it to one of these ebay guys who will JTAG it since I was too lazy to wire up one of my JTAG probes. They worked on it and said it was simply dead and the only alternative would be to replace the flash chips.
Bought a Nexus 7.
I've got the pit files for P311x and P3100 on my website https://sites.google.com/site/jrc2swebsite/downloads/samsung-galaxy-tab-2-70-p31xx
Hi all..or anyone out there
I have had the seemingly strange bootloop problem on my stock note N8010...which stuck on the dreaded "samsung galaxy note 10.1" and only has odin feature working. (and no factory reset options because I think the poor old tab is crammed to bursting with apps, files and cache and so had a meltdown) poor thing.
so anyway I check these sites of techie wonder and wisdom and followed every logical option..starting with the simple ones
first ran power down and tried to boot up (x3) with no joy, then take apart the tablet to disconnect / reconnect the battery and boot up (x3) still no change.
So went and got the firmware from samwares (both jelly bean and kitkat) to then flash through odin....tried and failed first because of dodgy cable, but the then got a new one...and joy of joys (at first) odin recognised my tab and the firmware flashed across with pass..but then auto rebooted straight back into the dreaded samsung 10.1 again....so tried different versions of odins... and tried other global n8010 firmware...but funnily and frustratingly then all fully download and pass in odin (and the andoid logo and green download status bar on the tablet seems to shown that downloading is and has fully taken place.... but the darn thing still wont boot up past the samsung galaxy note 10.1
Sadly coming to the ends of my tether (of so many nearly there false hopes, high and lows) and very little cash to send it to the Sami tech bods doesnt help matter....I then read and tried the (supposed) last resort pit file/firmware option...first with kitkat (as apparently that worked for someone somewhere) and then tried with jelly bean..again each time itAlways passes in odin.... but auto reboots into the dreaded bootloop logo .... to haunt and torment me.. Aaaaagh!!!!.....I would not mind if it said action failed (for once) like some others seem to experiencet...but it always passes in ODIN????
So.....have come to the semi ignorant conclusion it is either the bootloader section of the tablet or the original software that is messed up or some internal hardware component has a fault.
but was wondering if there is anthing left to try...or would it potentially be possible or worth trying to root a tablet in this condition?
As although I have not ventured into the wild worlds of rooting.....I am now pretty confident of messing with this tablets mind..and have little to lose...so any further ideas and help would be great.
Exact same here. Never flashed, totally stock N8010. My wife hadn't used it for a couple of weeks. So she grabs it again and it was off. booted to nothing but the boot logo. Nothing worked except Download mode.
Flashing stock roms has Odin reporting success, but it still won't boot up. Trying re-Partition does give a fail as soon as I press start.
And we aren't alone. It appears there are quite a few of these cases. I have no idea how to solve this.
I have done a bit of rom flashing on my old galaxy S (the first one) and bootloaders and such usually were included in a ROM. Rooting was done with Recovery or an app and I think it was also possible with adb, IIRC (it's been a while).
It's my wife's Note and she's starting to scope out mini iPads...
Same problem with GT-N8010
I am also having the same problem.
I tried to upload a new ROM via ODIN. All was successful from the ODIN app (PASSED). but stuck on the boot screen. Power and Vol up does not work (it appears to but then crashes out to the boot screen again) so no way to do a hard factory reset.
Volume down/power does work and allows you to get to Odin mode. but as above, uploading a new ROM does not seem to work.
This is an un-rooted GT-N8010 with the stock ROM when I purchased it back in 2013 I believe.
Come on guys, give us some ideas.
Thanks
Gene
Sounds like wrong model firmware flashed as that's the usual bootloop problem .
Try Odin firmware flash wait to passed then remove battery for a short while and replace and try recovery mode .
In my case there is no incompatible firmware issue... The tablet just stopped working one morning and that was that.
Can't comment on the other posters though.
Sent from my GT-I9305 using XDA Free mobile app
Gene_uk said:
In my case there is no incompatible firmware issue... The tablet just stopped working one morning and that was that.
Can't comment on the other posters though.
Sent from my GT-I9305 using XDA Free mobile app
Click to expand...
Click to collapse
My wife's the same. Never done anything to it. No idea how to remove the battery. I let the battery run down once, then recharged it, made no difference.
That was before trying to flash the new firmware. My Note says N8010 on the back, it says so in the download mode. I got a firmware from SamMobile for the N8010. Don't know what else I can do.
Widdly said:
My wife's the same. Never done anything to it. No idea how to remove the battery. I let the battery run down once, then recharged it, made no difference.
That was before trying to flash the new firmware. My Note says N8010 on the back, it says so in the download mode. I got a firmware from SamMobile for the N8010. Don't know what else I can do.
Click to expand...
Click to collapse
Having same problem here ... tried flashing different firmwares along with PIT file - still no luck ..
stuck on samsung galaxy note screen .. cannot get recovery mode
Any help guys?
Hello all,
I have flashed ROMs via recovery and Odin plenty of times. I would say I generally know what I am doing and I flash ROMs on the regular. This is my third Samsung device and have been rooting/flashing for almost 3 years, so not a noob. And this is the first time I encounter problem with my phone while flashing ROM.
I was stuck in a bootloop on my Note and it wouldn't even let me boot into recovery, so I decided to Odin and back to stock and try again... I got the one-click, phone recognized, yellow COM box popped up, hit start, walked away for 10-15 minutes. Come back and there has barely been any progress at all... I could barely see the green progress bar. I figured something is wrong because I've done this before and it only takes a minute at most. What I did next is what I think messed me up...I pulled my phone and closed the Odin dialogue box and tried to redo it. Problem is, nothing I could do would get me the Yellow COM box. The phone goes into download mode but Odin doesn't seem to want to recognize it. I've tried EVERYTHING. When I boot the phone normally, I get the Samsung error screen saying there was an issue with a firmware upgrade and I should try Kies. I download Kies and attempt to upgrade firmware but my phone still not recognized. I already tried it to other PC still the same result.
I can't post the pic of my phone.
Is there nothing I can do to restore it?:crying::crying:
ton8_22 said:
Hello all,
I have flashed ROMs via recovery and Odin plenty of times. I would say I generally know what I am doing and I flash ROMs on the regular. This is my third Samsung device and have been rooting/flashing for almost 3 years, so not a noob. And this is the first time I encounter problem with my phone while flashing ROM.
I was stuck in a bootloop on my Note and it wouldn't even let me boot into recovery, so I decided to Odin and back to stock and try again... I got the one-click, phone recognized, yellow COM box popped up, hit start, walked away for 10-15 minutes. Come back and there has barely been any progress at all... I could barely see the green progress bar. I figured something is wrong because I've done this before and it only takes a minute at most. What I did next is what I think messed me up...I pulled my phone and closed the Odin dialogue box and tried to redo it. Problem is, nothing I could do would get me the Yellow COM box. The phone goes into download mode but Odin doesn't seem to want to recognize it. I've tried EVERYTHING. When I boot the phone normally, I get the Samsung error screen saying there was an issue with a firmware upgrade and I should try Kies. I download Kies and attempt to upgrade firmware but my phone still not recognized. I already tried it to other PC still the same result.
I can't post the pic of my phone.
Is there nothing I can do to restore it?:crying::crying:
Click to expand...
Click to collapse
You sound like you have a problem similar to what I had.
I was downloading 6.01 to install using KIES 3 and got no recognition from my Windows 7 based computer when I connected up and ran KIES.
I had the Sammy 1.55.5 USB drivers installed.
What I did it was use KIES,not KIES 3.
Samsung says KIES 3 but that turned out to be wrong in my case,although I'm not sure why?
I'm now running M/M and happily gutting the bloat out of it.
It feels better than new now!
Solved
Anyway, I already solved it!
ton8_22 said:
Anyway, I already solved it!
Click to expand...
Click to collapse
i have the same problem....
how did you solve it?