Database Info

Odin Stock Flash SGH-I727-UCKJ2-k0nane.tar * Not Working * i727 Skyrocket

I am having trouble getting Odin flash to Pass. I am not new to the software, have done it many times on many different phones. I am using Odin 1.85 and placing SGH-I727-UCKJ2-k0nane.tar in the PDA slot with only Re-Boot checked just as stated but it freezes everytime I get to system.img.ext4.
Hence I am soft bricked and stuck in download mode with the yellow triangle ! showing.
Anyone else having this issue or know of a way to fix?
Things I have tried:
Different Computer
Different USB Slot
Different USB Cable
Different .tar download links
Kies will not acknowledge the phone

Just out of curiosity did you extract the 7zip?
Sent from my SAMSUNG-SGH-I727 using xda premium

I'm having the same exact problem, followed the procedures and ODIN failed.
It says Firmware upgrade encountered an issue and KIES wont recognize it either
and i did extract the 7zip for the TAR file
Phone is just stuck now
Help please

asoto88 said:
I'm having the same exact problem, followed the procedures and ODIN failed.
It says Firmware upgrade encountered an issue and KIES wont recognize it either
and i did extract the 7zip for the TAR file
Phone is just stuck now
Help please
Click to expand...
Click to collapse
I was stuck there just a little while ago. Will it boot into the warning screen where you press volume up to continue to download mode or straight to the "please connect to kies" screen?

ckck543 said:
I was stuck there just a little while ago. Will it boot into the warning screen where you press volume up to continue to download mode or straight to the "please connect to kies" screen?
Click to expand...
Click to collapse
Before it got stuck, it booted into the warning screen then i could continue into download mode
NOW, it just sits in "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.

change computer, if you can

got it to work
i used a older version of Odin, version 1.3
Worked perfect.
Thanks for your help guys

I'm having the same problem. I'm stuck at the "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." Odin (both 1.3 and 1.85) hangs at system.img.ext4. Thanks in advance for any help.

Having the same problem, looking forward to some advice.

What exactly is happening and what exactly have you tried?
Sent from my SAMSUNG-SGH-I727 using xda premium

I'm having this problem as well.
I flashed to CM9 nightly and got it working beautifully before I realized I cannot access my Kies backup to retrieve my contacts and pictures.
Tried to return to stock and it hangs on <ID:0/003> system.img.ext4 with maybe 5% of the status bar complete.
I've attempted to re-download the rom as well as reinstalling the drivers. If I cancel the flash I'm able to reflash CWM using oden and use CWM to flash CM9 to get the phone functional again. This might help anyone with a bricked phone.
I've tried this several times, sometimes it will hang on recovery.img as well. Any help with this would be appreciated. I'll try downloading an older version of oden as recommended above and trying it that way. I'll also try a different computer.
Edit:
To add to this I was able to get Kies to recognize the phone at one point. I then tried to do a firmware recovery and it errors out saying there is an error with the device. Not sure if this means anything as Kies appears to be the crappiest software I've come across in a long time, It won't even detect my untouched Galaxy Tab 8.9 (SGH-i957) at all.
Edit2:
Just copied everything over to my laptop and tried again. Flashed without issue using odin 1.87 after installing kies. Problem appears to be a driver/connection problem on the computer end. Kinda weird as I've tried uninstalling/reinstalling drivers with no success on my desktop. Phone kept looping the ATT "Rethink Possible" boot animation. Had to go into the stock recovery and wipe partition and factory reset. Then it started up fine and is running with 2.3.5

Soft Brick Tmobile Galaxy Tab Plus

Is there anyway to get out of this. It only shows the Samsung Galaxy Tab Logo, I can also get into recovery. I tried to wipe everything to see if it would boot up, but its still stuck on the startup screen. Any help would be much appreciated!!

kaizasoshi said:
Is there anyway to get out of this. It only shows the Samsung Galaxy Tab Logo, I can also get into recovery. I tried to wipe everything to see if it would boot up, but its still stuck on the startup screen. Any help would be much appreciated!!
Click to expand...
Click to collapse
this is very easy to fix fortunately you have not hard bricked LOL now follow my steps....
step1. download your required firmware package from the development section.
step2. download the odinv1.8 and then unzip and install to desktop
step3. open odin and select PDA and load the unzipped firmware file. (do not touch anything else at all)
step4. power on the device with volume button down and power on (download mode)
step5. plug in to pc via USB 2.0 as this has less chance of failing then press start on odin it will push the firmware on to the device and them reboot
step6. sit back and enjoy lol.
thank me if it helps.

jmar8124 said:
this is very easy to fix fortunately you have not hard bricked LOL now follow my steps....
step1. download your required firmware package from the development section.
step2. download the odinv1.8 and then unzip and install to desktop
step3. open odin and select PDA and load the unzipped firmware file. (do not touch anything else at all)
step4. power on the device with volume button down and power on (download mode)
step5. plug in to pc via USB 2.0 as this has less chance of failing then press start on odin it will push the firmware on to the device and them reboot
step6. sit back and enjoy lol.
thank me if it helps.
Click to expand...
Click to collapse
Thanks Bro, will try this when I get home from church

Do you know where I can find the tmobile firmware file I need?

There you have it :
www.sammobile.com/firmware/?page=3&t=1&o=1&m=SGH-T869&r=5#regiona
P_

pakalrtb said:
There you have it :
www.sammobile.com/firmware/?page=3&t=1&o=1&m=SGH-T869&r=5#regiona
P_
Click to expand...
Click to collapse
Thanks Bro!! It worked!!

soft brick galaxy tab 7.0 plus
I have the same problem as described by kaizasoshi on a GT-P6210 (WIFI only model) and can get to download mode. I haven't been able to find a copy of Odin 1.8 to download so I have Odin 4.0.3 - hopefully that'll work. The megaupload link for Odin 1.8 gives you software Odin 1.8.2 which turns out to be some sort of MRI operating software.
I used the link provided in the response for the GT-P6200 model, did a search, and I can't find the firmware file for the P6210 anywhere on the site. I found a file elsewhere on XDA supposedly is the firmware file for my model P6210 and when adding to PDA I get an error "Invalid Image File Type" The file name that I found is named GT-P6210_XAR_P6210UEKL1_P6210XARKL1_P6210UEKL1\P6210XARKL1_P6210UEKL1_HOME.tar.md5
Does this sound right? Does anyone have any guidance for me (besides stop bricking my Tab)? Thanks

soft brick galaxy tab 7.0 plus - continued
Well I found a version of Odin 1.8 and it took the tar file without an error message. I started flashing the file to my P6210 and it went well for a couple of minutes (about half a green bar in the first block). Then something went wrong and ODIN started alternating the below messages:
<ID:0/004>Added!!
<ID:0/004>Removed!!
<ID:0/004>Added!!
<ID:0/004>Removed!!
And while showing the above, the P6210 screen started alternating between a black screen and the below message:
Firmware upgrade encountered an issue.
Please select recovery mode in Kies & try again.
I watched this continue for over an hour in this loop (no progress on the green bar), then disconnected and reconnected the P6210. I launched Kies and tried troubleshooting but just got the alternating screen again on the P6210 and starts and stops of Kies troubleshooting. It looks like it's pretty hosed. Any suggestions?
Help would be greatly appreciated.
As an aside, the only thing I've done to the tablet was do a one step root about 3 months ago and I think two product updates afterwards (reapplied the root after each). The tablet ran OK but I started getting the auto shutdowns other have gotten, along with several instances of a warm battery and high battery rates of consumption. It didn't behave this way all the time. Finally two days ago, while on the charge,r I found it locked into the Tab startup screen. I could get it to boot into recovery but kept getting lots of red error messages, like it was looking for files that weren't there, then I'd reboot and it would go back to the locked startup screen.

Can you get into recovery by holding up and power on (release power after it boots, but hold volume up)
Sent from my HTC Glacier using Tapatalk

Yes I can get to recovery now. Since my previous post, I recharged unit overnight and attempted to reflash OS. This time, Odin runs all the way until the first green box says PASS! Odin Message box says <OSM> All threads completed (succeed 1/failed 0). Then message box cycles thru ID 0/004 Removed ID 0/005 added!! then ID 0/005 Removed!!, then ID 0/005 Added!!
At this point Odin doesn't do anything else. The P6210 then starts giving a bunch of failed messages - failed to mount cache(no such file or directory), Can't mount /cache/recovery/command, then goes into Manual Mode then message failed to mount /efs (no such file or directory) install application for customer: Can't mount /efs copy application failed. Then meesage Applying multi CSC then failed to mount /efs, then multi_csc can't mount/efs
Then multi-csc applied failed.then more messages on failing to mount cache can't mount cache recovery log/last log
Then at this point the top of the screen offers rebot/apply update from sd/wipe data-factory reset/wipe cache partition. Through all of this I have not unplugged the P6210 from the PC.
I select reboot system now and press power button (still connected)
Get a bunch more messages about cant open cache recovery log. Then it goes to the Samsung Galaxy tab screen and just hangs.
It seems there's some files missing that is causing the unit to hang.

added/removed sounds like could be faulty wire connection.
which firmware are you trying to flash may we ask?
May be useful to find a .pit file with stock firmware, if there are any around for your device.

kaizasoshi said:
Thanks Bro, will try this when I get home from church
Click to expand...
Click to collapse
no probs my friend happy to help haha

soft brick galaxy tab 7.0 plus - continued
I've also tried changing the usb/samsung cable from aftermarket to OEM and changing USB port used on PC. Reflashed PDA file, No change. The reflash appears to complete but is followed by the error messages identified previously. The file I'm attempting to flash w/Odin 1.85 is named P6210XARKL1_P6210UEKL1_HOME.tar.md5. The file is 894.011 MB. I've downloaded it twice and no difference in flash result. I'm not having any luck finding a PIT file for the P6210.
Still looking for PIT file.

kaizasoshi said:
Is there anyway to get out of this. It only shows the Samsung Galaxy Tab Logo, I can also get into recovery. I tried to wipe everything to see if it would boot up, but its still stuck on the startup screen. Any help would be much appreciated!!
Click to expand...
Click to collapse
May I ask what you did to soft brick? Be good learning experience for everyone. Thanks.

soft brick galaxy tab 7.0 plus - continued
I've also found these 3 other files associated with the P6210. They are:
GT-P6210-MULTI-CSC-OXEKK1_RST.tar.md5
P6210_APBOOT_P6210XXKL2_CL583761_REV02_user_low_ship.tar.md5
P6210_CODE_P6210XXKL2_CL583761_REV02_user_low_ship_16G.tar.md5
Would loading these files via Odin possibly help with my problem? I'm not sure which files would be loaded for the different parameters (PIT, BOOTLOADER, etc). It appears the CSC file would be loaded for CSC.
PS: I don't know what happened with kaizasoshi as far as how his TAB problem initiated, but mine had been experiencing SOD, auto shutdowns and warm battery when plugged into charger over night for the previous several weeks. I picked it up one morning off the charger and the P6210 was frozen on the startup screen and wouldn't finish boot or shut down. It would go into recovery using the power and volume switches.

hi all, i have the same similar problem as TS but mine's a P6200 tab, heard that i need a pit file & the firmware ver(singapore) to flash it...
where do i get those files including odin? i got the firmware via sammobile.com, but no idea to get the pit & odin files,... will any kind souls direct me to them?

I found a PIT file a few days ago, supposedly for the P6200 using Google. I don't know if it works or not. I have a P6210, so I don't think I can use a P6200 PIT.
PIT Link:
http://www.sammobile.com/forum/showthread.php?t=2856
ODIN Link:
http://www.cpkb.org/wiki/Samsung_Odin#Samsung_Odin3_download_links
Pick a version. 1.81 and 1.85 seem popular.

any new updates on this? im having the exact same problem and have tried all the previously mentioned files through Odin with no positive results. any help would be appreciated. i have a US version 6210

yeah.. dont flash a tab plus firmware unless you're sure its for your specific model
either T869-Tmobile/WifiGT-P6210/or G version GT-P6200. If youve flashed the previously mention files, you've probably done some serious damage.
Best option now: Find a device specific firmware WITH a .pit file, flash with Odin/Heimdall with fngers crossed.
Other options: tell them you hooked it up to iTunes to sync your media.. lololol
hope you get warrantied..

chrisrotolo said:
yeah.. dont flash a tab plus firmware unless you're sure its for your specific model
either T869-Tmobile/WifiGT-P6210/or G version GT-P6200. If youve flashed the previously mention files, you've probably done some serious damage.
Best option now: Find a device specific firmware WITH a .pit file, flash with Odin/Heimdall with fngers crossed.
Other options: tell them you hooked it up to iTunes to sync your media.. lololol
hope you get warrantied..
Click to expand...
Click to collapse
well that just sucks!! honestly with all the SODs and reboots i just wish samsung would give me my $350 because this thing hasnt worked well from the begining. guess its back to samsung

[Q] Bricked Tablet - see post for details

Here is the sequence of events:
Galaxy tab 2 10.1 with factory rom (wife's tablet)
Wife tells me that she keeps trying to complete the update everytime she gets prompted, but it always fails
Wife also tells me that she can't power off the tablet (she presses the power button, it shuts down, but then it starts up again)
I try the upgrade, get same result as wife
I try to reset the rom: I download what I think is the correct file, download Odin 1.85, and run it.
put tablet into download mode, attempt to use Odin to load new rom ***note, this is probably where I screwed up, as I am not sure i used the correct file. This is the file I used: PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708.tar, which I found in a search on xda forums for my problem.
Odin reported failure. I tried again, same result.
I tried using KIES, using the Firmware upgrade and intitialisation (note that I must have UK version of KIEs, based on the spelling of initialisation--maybe that's a problem??/). I put in the model number, then the serial number if the tablet, get a message that GT-P5113 does not support initializing
tablet displays the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I try to put tablet back into download mode, but that doesn't work. Any suggestions on what to do at this point? Appreciate a step-by-step solution, if possible.
Thanks!

kevinkohut said:
Here is the sequence of events:
Galaxy tab 2 10.1 with factory rom (wife's tablet)
Wife tells me that she keeps trying to complete the update everytime she gets prompted, but it always fails
Wife also tells me that she can't power off the tablet (she presses the power button, it shuts down, but then it starts up again)
I try the upgrade, get same result as wife
I try to reset the rom: I download what I think is the correct file, download Odin 1.85, and run it.
put tablet into download mode, attempt to use Odin to load new rom ***note, this is probably where I screwed up, as I am not sure i used the correct file. This is the file I used: PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708.tar, which I found in a search on xda forums for my problem.
Odin reported failure. I tried again, same result.
I tried using KIES, using the Firmware upgrade and intitialisation (note that I must have UK version of KIEs, based on the spelling of initialisation--maybe that's a problem??/). I put in the model number, then the serial number if the tablet, get a message that GT-P5113 does not support initializing
tablet displays the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I try to put tablet back into download mode, but that doesn't work. Any suggestions on what to do at this point? Appreciate a step-by-step solution, if possible.
Thanks!
Click to expand...
Click to collapse
Seems you flashed a wrong file.
Download another rom from http://live.samsung-updates.com/
and reflash with odin
Last week i tried to update my tab from 4.1.2 to 4.2.2 it hangup while flashing. Had to reset but then end up with firmware upgrade encountered blablabla. I just reflash within the blind screen without download mode and got it to work again

But don't I need to get the tablet into download mode first?
Rosli59564 said:
Seems you flashed a wrong file.
Download another rom from <<url.....>>
and reflash with odin
Click to expand...
Click to collapse
That makes sense, but how do I get the correct file to the tablet if I can't get the tablet into download mode?

kevinkohut said:
That makes sense, but how do I get the correct file to the tablet if I can't get the tablet into download mode?
Click to expand...
Click to collapse
If it's really a gt-p5113 then find the 1 for your country. If you're not sure your region code/csc then just download for any region.
You will know what i'm talking about if take a look at the given link

Please look at item 10 on my list
Rosli59564 said:
If it's really a gt-p5113 then find the 1 for your country. If you're not sure your region code/csc then just download for any region.
You will know what i'm talking about if take a look at the given link
Click to expand...
Click to collapse
I can't load ANY file to the tablet, as I CANNOT GET IT INTO DOWNLOAD MODE. I need to know how to force the tablet into download mode. Pressing POWER and VOLUME DOWN does not work. NOTHING HAPPENS.

Connect to PC on the screen "firmware upgrade encountered blablabl" Downloadmode on in Background, Odin can get access
If you are working with Odin, please kil ALL Samsung and KIES Programs and Services running in Background.

Hi for go to download mode you have to press power and volume up buttons
Sent from my GT-P5113 using XDA Premium 4 mobile app

Android-Andi said:
Connect to PC on the screen "firmware upgrade encountered blablabl" Downloadmode on in Background, Odin can get access
If you are working with Odin, please kil ALL Samsung and KIES Programs and Services running in Background.
Click to expand...
Click to collapse
I have tried this many times and Odin just fails. TWRP, CWM, Phil's touch all tried and failed. I have tried so many ROMs not sure I could list 'em all. Wanted to try SlimKat. But have this same problem, can't find the handle now, I only get the firmware upgrade encountered blah, blah. I'm just about ready to make confetti out of it! Can I get assistance with this problem, please. I don't care what ROM I have to run, I just need it to work...

Any solution to your problem?
Pp.

PanchoPlanet said:
Any solution to your problem?
Pp.
Click to expand...
Click to collapse
None as yet, I'm running out of real estate to search...

The rom you used in your op was probably for a data tab like sprint, att, Verizon, that is usually a brick result.
If you could factory reset you may have a chance but I doubt it without recovery or download mode.
Pp

You are faceing the "black screen of death" ("Firmware upgrade encountered an issue....").
Uninstall kies and reboot your pc.
Start odin.
Connect the tab running the black screen of death (BSOD).
Download mode running in background of BSOD so odin will detect your device.
Flash the correct firmware now and pray flashing the at&t rom didn't caused a hardbrick.
Send from OnePlus One using Tapatalk

Correct rom
I think that is exactly my problem. Last night I got Odin to run all the way through, it said pass but still no soap. I'm just about to list it for parts and at least minimize my loss.

[Q] Am I bricked err?

I got my GNP 12.2 (SM-P900) a few weeks ago and just tried to root it using Odin and download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
However it paused at cache.img and after 10 minutes or so it just failed.
I've tried it a few times, but same thing, and on start up all I get is "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried Kies 3 and Kies 2.6 but they both say my device is not supported, even if I try to go into Tools and do it it says the model name is incorrect and doesn't even give me an option to enter the serial number :-\
I looked around for a stock ROM but the closest I could find was the P901 and P905 (But I am the P900)
I don't really know what to do, so any advice would be much appreciated :angel:

Actually got Kies working, was just entering the model # wrong
This could probably be deleted / etc, not really sure how to do that

jns20 said:
Actually got Kies working, was just entering the model # wrong
This could probably be deleted / etc, not really sure how to do that
Click to expand...
Click to collapse
bump?
I'm having the same exact issue. I can get it into download mode. I've tried Kies several times and it keeps failing. Originally, I was using odin 3.07 to auto root on the sm-p900. During the process, the screen got this weird rainbow pixelated look, and odin told me the process has failed. It is now stuck on the error message "Firmware update has encountered an issue..."
Now I'm not really sure what to do. I've tried to reboot from download mode, and that sends me right back to the error message.
Any ideas?

ChampagneFerret said:
bump?
I'm having the same exact issue. I can get it into download mode. I've tried Kies several times and it keeps failing. Originally, I was using odin 3.07 to auto root on the sm-p900. During the process, the screen got this weird rainbow pixelated look, and odin told me the process has failed. It is now stuck on the error message "Firmware update has encountered an issue..."
Now I'm not really sure what to do. I've tried to reboot from download mode, and that sends me right back to the error message.
Any ideas?
Click to expand...
Click to collapse
IIRC you need to reflash recovery and you should be able to boot up again.

muzzy996 said:
IIRC you need to reflash recovery and you should be able to boot up again.
Click to expand...
Click to collapse
I'm sorry if I sound stupid but how do I reflash the recovery? I keep searching for a recovery ROM but I can't find anything, so I must be misunderstanding something here.

ChampagneFerret said:
I'm sorry if I sound stupid but how do I reflash the recovery? I keep searching for a recovery ROM but I can't find anything, so I must be misunderstanding something here.
Click to expand...
Click to collapse
TWRP 2.7.0.0 is available now! http://forum.xda-developers.com/showthread.php?t=2706982 :good:

icem237 said:
TWRP 2.7.0.0 is available now! http://forum.xda-developers.com/showthread.php?t=2706982 :good:
Click to expand...
Click to collapse
Thank you very much. In case anyone else is wondering. I ended up asking the problem with Samsung kies, using the upgrade feature rather than emergency recovery. Wiped all my data but u have my tablet back.
Kind of wondering what went wrong with the root attempt. I followed the instructions to the T.

ChampagneFerret said:
Kind of wondering what went wrong with the root attempt. I followed the instructions to the T.
Click to expand...
Click to collapse
Did you use Odin 3.0.7 or 3.0.9? 3.0.7 is included with CF and MUST be used even though 3.0.9 is the latest. If odin was already installed on your PC and you used 3.0.9 bad things are going to happen.

ChampagneFerret said:
Thank you very much. In case anyone else is wondering. I ended up asking the problem with Samsung kies, using the upgrade feature rather than emergency recovery. Wiped all my data but u have my tablet back.
Kind of wondering what went wrong with the root attempt. I followed the instructions to the T.
Click to expand...
Click to collapse
I myself have tried odin 3.07 and .09 and mine just hangs when cache is being written to. A full green bar but will not move pass the cache portion of the install.

icem237 said:
I myself have tried odin 3.07 and .09 and mine just hangs when cache is being written to. A full green bar but will not move pass the cache portion of the install.
Click to expand...
Click to collapse
I tried both as well, and that's exactly what happened to me. During the process, my screen went all screwy and that's when it told me the process had failed.

I had some of the problems mentioned above. My attempt to flash CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 failed using Odin3-v3.07.exe.
It tries for several minutes and then says failed.
I then used Kies (not Kies 3) to reflash the tablet to factory settings. Here its important to know that Kies will never "connect" you have to ignore that and go to tools and "firmware upgrade and initialization". Google "Firmware upgrade encountered an issue” – Got This Error While", the first result on "droidviews" is the guide i used to fix this.
I then went into the settings and enabled "USB Debugging". Something i had forgotten before. I tried to flash the root file again, but it still failed.
Given that i was able to reflash the firmware with kies, i would say my USB port / cable / drivers must all be good.
What else should i try?

Flash Stock Recovery
davschm said:
I had some of the problems mentioned above. My attempt to flash CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 failed using Odin3-v3.07.exe.
It tries for several minutes and then says failed.
I then used Kies (not Kies 3) to reflash the tablet to factory settings. Here its important to know that Kies will never "connect" you have to ignore that and go to tools and "firmware upgrade and initialization". Google "Firmware upgrade encountered an issue” – Got This Error While", the first result on "droidviews" is the guide i used to fix this.
I then went into the settings and enabled "USB Debugging". Something i had forgotten before. I tried to flash the root file again, but it still failed.
Given that i was able to reflash the firmware with kies, i would say my USB port / cable / drivers must all be good.
What else should i try?
Click to expand...
Click to collapse
For those getting stuck or failing root, Make sure your usb drivers are updated in Kies 3 then flash stock recovery in Odin 3.07. Don't get mixed up with stock firmware (over 1GB) and stock recover (only around 20MB).
Stock recovery is here:
http://download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
Thread is here:
http://forum.xda-developers.com/showthread.php?p=50492301&nocache=1

Russbad said:
For those getting stuck or failing root, Make sure your usb drivers are updated in Kies 3 then flash stock recovery in Odin 3.07. Don't get mixed up with stock firmware (over 1GB) and stock recover (only around 20MB).
Stock recovery is here:
http://download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
Thread is here:
http://forum.xda-developers.com/showthread.php?p=50492301&nocache=1
Click to expand...
Click to collapse
Question, what is the purpose of the Stock recovery and CWM recovery?
Also, after trying three times, i was able to get the flash to work. After each failier i used Kies (not kies 3) to flash back to factory. Would these recoveries have helped? Maybe i wouldn't have lost data?

davschm said:
Question, what is the purpose of the Stock recovery and CWM recovery?
Also, after trying three times, i was able to get the flash to work. After each failier i used Kies (not kies 3) to flash back to factory. Would these recoveries have helped? Maybe i wouldn't have lost data?
Click to expand...
Click to collapse
Stock recovery is what your device originally comes with. CWM recovery is a modified version of that and it allows you more functionality.
When I messed up my update and root, my device would not boot up at all. I flashed the stock recovery and that enabled me to successfully root. No data was lost, no factory reset was needed and all my apps and settings were unchanged.

Don't mean to bump this thread, but I'm having the same issue. Odin 3.07 hangs up when it gets to cache.img, and it's non-responsive. I don't care about rooting it, I just want a stock firmware back. I've tried the files that Russbad posted, same issue. Running Note Pro 12. SM-P900 on 4.4.2.

bioncorp said:
Don't mean to bump this thread, but I'm having the same issue. Odin 3.07 hangs up when it gets to cache.img, and it's non-responsive. I don't care about rooting it, I just want a stock firmware back. I've tried the files that Russbad posted, same issue. Running Note Pro 12. SM-P900 on 4.4.2.
Click to expand...
Click to collapse
Try this: With your device unplugged from your PC, open Kies 3, go to tools tab and uninstall the drivers. Then plug your device in and reinstall drivers.
I don't know if it makes a difference but if you get your device to boot up, enable developer options and check USB debugging.
Also make sure you are using the cables that came with your Tablet.
Then flash stock recovery and flash stock firmware.
If it still fails, check that your downloaded firmware and recovery are not corrupted, download them again.
Also try these procedures using different USB ports.
Good luck!

Russbad said:
Try this: With your device unplugged from your PC, open Kies 3, go to tools tab and uninstall the drivers. Then plug your device in and reinstall drivers.
I don't know if it makes a difference but if you get your device to boot up, enable developer options and check USB debugging.
Also make sure you are using the cables that came with your Tablet.
Then flash stock recovery and flash stock firmware.
If it still fails, check that your downloaded firmware and recovery are not corrupted, download them again.
Also try these procedures using different USB ports.
Good luck!
Click to expand...
Click to collapse
I found the issue, it should work with everyone with it. Some people don't have the .md5 extension enabled in their archive viewer, so by simply removing the .md5 (left with CF_XXXX.tar), and flashing that it works 100% fine.

bioncorp said:
I found the issue, it should work with everyone with it. Some people don't have the .md5 extension enabled in their archive viewer, so by simply removing the .md5 (left with CF_XXXX.tar), and flashing that it works 100% fine.
Click to expand...
Click to collapse
I finally got mine rooted by simply trying over and over. I re-downloaded the CF flash tool and used 7zip to extract it several times, and used a different usb port at least once. Not that I really thought there was a problem with my extraction or the download or my USB port. But from what i have seen posted, you just have to try it 3 or 4 (maybe even 10) times until you get lucky and it works.
I did at one point try to recover my Note 12.2 with the "recovery.img" instead of flashing it with a full factory re-image (which causes data loss) but that didn't work for me ether. But I later had good luck with using Odin 3.09 to flash TWRP. So at least I now have a good custom recovery and backup tool.

okay everyone, I'm going to try these methods and report on what happened. Thank you for being so helpful. :cyclops:

ChampagneFerret said:
okay everyone, I'm going to try these methods and report on what happened. Thank you for being so helpful. :cyclops:
Click to expand...
Click to collapse
FINALLY! :laugh: I got it to root!
I ended up using a different computer in the end and used Kies 2.6 for the drivers. I tried this a total of maybe 8 or 9 times, and it worked on the second attempt on the second attempt.
For the record, I left "md5" in the file when rooting, and that's when it worked.

[Q] GT-P5113 Only booting to: Firmware upgrade encountered an issue.

Tablet is a Samsung Galaxy GT-P5113TS 16GB version.
The initial problem with the tablet was that the Galaxy Tab logo appear but would just hang. It would boot into the firmware download menu with the buttons but not the recovery mode.
Attempted to flash a CWM and/or a Philz Recovery. After the attempted flash (via Odin 1.85) which failed. The tablet could no longer be recognized by Odin. Rebooted the tablet and it now comes up with the error: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. The computer and Odin 1.85, and 3.09 all recognize it is there connects to it but fails to install a recovery file, a PIT file, a full firmware (P5113UEUCMK3_HOME.tar.md5)
Kies detects there is a device but fails to recognize it.
Attempting to use Kies says it cannot upgrade or initialize the GT-P5113 after the model number and serial number are entered.
Odin 3.07 is presently the only Odin that goes through the entire process of flashing the Stock ROM.
However, when it completes, there is nothing on the screen. If I leave it for 10 minutes, the screen still remains black.
If I then shut it down, it reboot with the same error message. After trying that and another stock ROM,
Odin is now failing at system.img with the error Xmit Write fail XmitData Fail.
Now it is caught in a boot loop which reboots the tablet constantly (known only by the sound of a USB device disconnecting and reconnecting) and will eventually stop after a random time at the "firmware upgrade encountered an issue". Then I can try it again. I have tried it with the only two 4.2.2 firmwares that I can find on samsung-updates.
I have tried this on two different computers with the same firmware. It just seems to get worse the more I try.
I am not even sure what firmware was on it before as it belongs to a neighbour who asked me to help getting working for him.
Holding down the power button for 10 seconds or more does not shut down or stop the boot loop.
Any suggestions at all would be appreciated it.
Is there anything else I can try that I haven't tried already like a bootable micro SD card? I have searched and I can't find one or the correct information to make my own.
EDIT: Tried it with a PIT file (signed_espresso_20120220_16G.pit) but it fails to upload the PIT file with the error "There is no PIT partition"
Thanks for any help.

Um... do you know if odin was ever run with "repartition" checked but no pit file?
Sent from my SGH-T999 using Tapatalk

Not sure at this point but it is in the realm of possibility.
If it was, is there any way to repartition it? Like with Heimdall or something?
EDIT: This is what was done since posting the above.
OK, I left the tablet charging overnight (well I slept 4 hours or so) and this time it installed the firmware without any errors.
I figure it was that the battery was dead. However, even though it installs the firmware, it still fails if I use the .pit file with the same error of no PIT partition.
Upon reboot, it comes back to the "Firmware upgrade encountered an issue" message again.

tokenpoke said:
Um... do you know if odin was ever run with "repartition" checked but no pit file?
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Yes I tried to re-partition a couple of times using the 16GB PIT file as it is a 16GB Tab 2. But it never completed any attempt to do the re-partition.
It installs the firmware every time now but after when it is finished to do the reboot. The screen remains black until I hold down the power button to shut it down and then it reboots and presents me with the firmware encountered an issue message.

dechronic said:
Yes I tried to re-partition a couple of times using the 16GB PIT file as it is a 16GB Tab 2. But it never completed any attempt to do the re-partition.
It installs the firmware every time now but after when it is finished to do the reboot. The screen remains black until I hold down the power button to shut it down and then it reboots and presents me with the firmware encountered an issue message.
Click to expand...
Click to collapse
I think I wasn't clear enough.
Repartitioning without using a pit file can wipe the whole system into one or two partitions.
As far as I know that is an irreparable condition.
Sent from my SGH-T999 using Tapatalk

Is there a way to create a bootable Micro SD card that has a recovery image CWM/TWRP that will allow me to repartition?
I got a heimdall print-pit output from somewhere with the partition block sizes, etc.

Thanks for the help. I think the eMMC was bad to begin with because it was not booting into recovery or even flashing recovery images or booting any of them.
I was hoping there was a way I could make a bootable micro SD that I could format the eMMC, booting to a bootloader from the micro SD card and flashing the stock rom back on.

Hi Dechronic, and hi all xda-dev members here,
I think I am experiencing some problem with yours.
My friend asked me to fix his Galaxy Tab P5100. It shows yellow triangle with message "Firmware upgrade encountered an issue......"
I did try to enter recovery/download mode by hold power+vol up/down -> Display went blank, then back to yellow triangle.
I did try to flash stock ROM that downloaded from samsung website using Odin 3.10.7, 3.10.6 -> Failed
I did try to flash stock ROM that downloaded from samsung website using Odin 3.07 -> PASS. Then device went blank again. There was no sign of life , then I pushed the power button -> Back to yellow triangle, again.
I tried another flashing -> still same result.
I tried to install CWM from odin -> PASS -> screen went blank again
Did you successfully "wake" your device up? If yes then please share the steps here
Many thanks in advance.

haniefhusna said:
Hi Dechronic, and hi all xda-dev members here,
I think I am experiencing some problem with yours.
My friend asked me to fix his Galaxy Tab P5100. It shows yellow triangle with message "Firmware upgrade encountered an issue......"
I did try to enter recovery/download mode by hold power+vol up/down -> Display went blank, then back to yellow triangle.
I did try to flash stock ROM that downloaded from samsung website using Odin 3.10.7, 3.10.6 -> Failed
I did try to flash stock ROM that downloaded from samsung website using Odin 3.07 -> PASS. Then device went blank again. There was no sign of life , then I pushed the power button -> Back to yellow triangle, again.
I tried another flashing -> still same result.
I tried to install CWM from odin -> PASS -> screen went blank again
Did you successfully "wake" your device up? If yes then please share the steps here
Many thanks in advance.
Click to expand...
Click to collapse
Let me guess, you have KIES installed?
Uninstall KIES if you use Odin or Heimdall to flash via download mode.
Don't use USB-Hubs - use i direct port on your PC/Laptop.
Good luck!

I have the exact same error on my tab 2 P3100, I tried upgrading through Kies, after entering the Model and serial no it says does not support Initializing.
I downloaded the Stock Rom and flashed using Odin, it shows a successful flash only in Odin 3.07 (other versions of Odin it shows FAIL), but when it reboots it shows the same message "Firmware upgrade encountered an issue"
I un-installed Kies and flashed through Odin, yet again the same error message, its just stuck on this screen. Any help like what should I do next?

Same problem!! Any help?