Hi all,
I am new towards rooting phones and installing Roms. I bought a used Motorola XT910 today and it seemed to have a Korean version of gingerbread installed on it. As soon as I got home I downloaded the first stock Rom I could find on the internet for Asia and installed it on the phone. I followed the instructions in the below mentioned video and the phone is now completely bricked.
I just Googled " how to unbrick motorola xt910" and followed the instructions in the 6:09 video that comes up by RAZRGUY.
I've spent hours and hours on the internet looking for a solution but cannot find any. please help me. I'm getting the message now that I cannot install cos the battery is low. it won't charge and keeps booting up even when I try to shut it down.
Please help!!
raza.javaid said:
Hi all,
I am new towards rooting phones and installing Roms. I bought a used Motorola XT910 today and it seemed to have a Korean version of gingerbread installed on it. As soon as I got home I downloaded the first stock Rom I could find on the internet for Asia and installed it on the phone. I followed the instructions in the below mentioned video and the phone is now completely bricked.
I just Googled " how to unbrick motorola xt910" and followed the instructions in the 6:09 video that comes up by RAZRGUY.
I've spent hours and hours on the internet looking for a solution but cannot find any. please help me. I'm getting the message now that I cannot install cos the battery is low. it won't charge and keeps booting up even when I try to shut it down.
Please help!!
Click to expand...
Click to collapse
I can try to help you as I have an xt912, very similar but there is some difference. My Razr is CDMA/Verizon yours is GSM international.
First of all, when you turn on your phone, how far does it get? Red Moto M, then the bootanimation loops? or does it go from red moto m to black screen?
Hey,
The usual procedure is just to Hard Reset.
To do this, try
Step 1) With the phone off, Press & Hold the VOL UP+ & VOL DOWN- buttons simultaneously then while continuing to hold the VOL UP+ & VOL DOWN- buttons Press and Hold the POWER button till a menu appears.
Step 2) Use the VOL DOWN- button to navigate the menu & the VOL UP+ to select the RECOVERY option.
Step 3) When presented with a logo with an exclamation mark! Press & Hold the VOL UP+ & VOL DOWN- buttons simultaneously to bring up the next menu of options.
Step 4) Use the VOL DOWN- button to navigate the menu & the POWER button to select the Wipe data / Factory reset option.
Step 5) Use the VOL DOWN- button to navigate the menu to confirm this selection. Press the POWER button to begin the Factory Reset. (This may take a few minutes just be patient and wait.
Step 6) Once the task has completed press the POWER button to restart the device.
Source: Hard Reset Site
Or you may want to try manually flashing the original software to reset it back. You could try using flashtool.
Or You could contact the RC Help Chat 24/7
http://forum.xda-developers.com/showthread.php?t=1878241
Tell them what I said so they know where to go.
Thread Type: Can I haz Brick?
Hit Thanks if you found this useful
Silverlink34 said:
I can try to help you as I have an xt912, very similar but there is some difference. My Razr is CDMA/Verizon yours is GSM international.
First of all, when you turn on your phone, how far does it get? Red Moto M, then the bootanimation loops? or does it go from red moto m to black screen?
Click to expand...
Click to collapse
Yes it takes me to the black boot up screen. I've tried charging and the phone charges up as well! That's a good sign!
Moto razr pricked and battry low
hi gays i thing this is my first time..i have Motorola razr xt 19 running ISC 4.0.4 I tried to flash cm 10 mod via recovery i do factory reset and i
formatting system when i reboot the phone it's stock on cm10 boot, more then an hour i have try to flash the oregnal fast-boot XML zip via RDS
but it's giving me that battery low fall, and i have try to charge the but its not charging???? please gays i need your help hot to charge the battery
sorry for my bad English
Hi,
I've installed this ROM and everything seems to run smoothly unless the power on of the phone.
When I try to power on the phone from a "normal" shutdown It doesn't power on with the ON button.
I can only power it on removing the battery and then I can press the ON button and the phone powers on.
I can power on the phone if I press at the same time the ON and the Vol+ buttons too.
Surprisingly, that combination (ON + Vol+) powers on the phone instead of going to recovery.
Any suggestion?
Thanks.
Hi, the problem has been resolved in the newer versions of the rom.
For a faster reply to these questions, please write in the original thread.
Bye.
Andrea_d86
how to make hard reset on lg g pro 2?
Turn off your phone; if you can’t do it as usual, then press power button for about 15 seconds.
After shutting down your device, press volume down button and power button together and at the same time until the LG logo appears on the screen.
When the LG logo is displayed, let go of the power button, but keep pressing the volume down key.
Now press once more power button.
Once you do that, on your LG G Pro 2 the factory reset menu will be displayed.
Press power button in order to agree and wait while the hard reset is being completed.
Then, if you want you can enter recovery mode for clearing cache and for performing other operations.
Go back to Android OS by selecting „reboot system now”.
rowihel2012 said:
Turn off your phone; if you can’t do it as usual, then press power button for about 15 seconds.
After shutting down your device, press volume down button and power button together and at the same time until the LG logo appears on the screen.
When the LG logo is displayed, let go of the power button, but keep pressing the volume down key.
Now press once more power button.
Once you do that, on your LG G Pro 2 the factory reset menu will be displayed.
Press power button in order to agree and wait while the hard reset is being completed.
Then, if you want you can enter recovery mode for clearing cache and for performing other operations.
Go back to Android OS by selecting „reboot system now”.
Click to expand...
Click to collapse
I've tried this myself too, but it booted the phone in Safe Mode and after that won't turn on.
The phone is on stock rom and is the D83810f 16 GB version. After I took out and reinserted the battery again, the phone started normaly.
wurealm said:
I've tried this myself too, but it booted the phone in Safe Mode and after that won't turn on.
The phone is on stock rom and is the D83810f 16 GB version. After I took out and reinserted the battery again, the phone started normaly.
Click to expand...
Click to collapse
actually, this worked for me...
Turn off the LG G PRO 2 (F350 / D837 / D838)
Make sure the battery LG G PRO 2 (F350 / D837 / D838) already full or more than 50%
Press together and hold the Power Button + Volume Down Button
If the Logo appear, then release all button, after that continue with press again Volume Up Button + Volume Down Button together then we are already at Recovery mode
Choose wipe data/factory reset using Volume Button, and press Power Button to Enter or OK
The LG G PRO 2 (F350 / D837 / D838) will continue master reset, wait for several minutes until the the phone start like new again.
source
BUT, instead of restarting, it takes me to philz touch recovery that I had installed after rooting. THen when I restart from there, it goes into the LG splansh screen and stays there forever. Can anyone help me with this?
Also, Philz touch recovey asks me to fix root before restarting. Is is necessary? I think selecting that option is causing the soft-brick.
Anybody have a clue?
You better keep a copy of workable ROM in your root directory, so that you can flash anytime to rescue your phone.
hi .,
Please help me
my phone LG G Pro 2 Bootloop and my Volume up button not working ,what the solution for this case ? please help me ,i want hard reset or flash ,please help me .Contact by +6283191182991
turn off phone...press power botton and vol up same time....when logo appear..release vol up but keep pressing power untill you see korean stuff or recovery appears...then press vol down..thats for lolipop or when you have custom recovery installed... Now if your on kitkat try this ...turn off phone...press power botton and vol down...when logo appear release power botton and keep pressing vol down and vol up same time untill recovery appears....hit tnx if it works
xenius9[/MENTION] - Thank you again for the update. However, for some reason, this new A-Gapps cannot install the Google+ app. It says Device is incompatible. It may not be important to others but i kinda use that app all the time so just wanted to let you know.
auldthief said:
actually, this worked for me...
Turn off the LG G PRO 2 (F350 / D837 / D838)
Make sure the battery LG G PRO 2 (F350 / D837 / D838) already full or more than 50%
Press together and hold the Power Button + Volume Down Button
If the Logo appear, then release all button, after that continue with press again Volume Up Button + Volume Down Button together then we are already at Recovery mode
Choose wipe data/factory reset using Volume Button, and press Power Button to Enter or OK
The LG G PRO 2 (F350 / D837 / D838) will continue master reset, wait for several minutes until the the phone start like new again.
it works...thx.....just press volume down + power together...then release all....then press volume up and volume down together...
appear wipe erase.....thx master
---------- Post added at 05:27 PM ---------- Previous post was at 05:23 PM ----------
wurealm said:
I've tried this myself too, but it booted the phone in Safe Mode and after that won't turn on.
The phone is on stock rom and is the D83810f 16 GB version. After I took out and reinserted the battery again, the phone started normaly.
Click to expand...
Click to collapse
power OFF......PRESS TOGETHER POWER + VOL DOWN...logo appears LG...release BOTH...then press VOL UP + VOL DOWN...
erase everything YESS...
Click to expand...
Click to collapse
Good job
j4yd3n said:
xenius9[/MENTION] - Thank you again for the update. However, for some reason, this new A-Gapps cannot install the Google+ app. It says Device is incompatible. It may not be important to others but i kinda use that app all the time so just wanted to let you know.
Click to expand...
Click to collapse
ist procedure working on my f350s. I have custom rec cwm. Great job. Thanx alot.
thanks
auldthief said:
actually, this worked for me...
Turn off the LG G PRO 2 (F350 / D837 / D838)
Make sure the battery LG G PRO 2 (F350 / D837 / D838) already full or more than 50%
Press together and hold the Power Button + Volume Down Button
If the Logo appear, then release all button, after that continue with press again Volume Up Button + Volume Down Button together then we are already at Recovery mode
Choose wipe data/factory reset using Volume Button, and press Power Button to Enter or OK
The LG G PRO 2 (F350 / D837 / D838) will continue master reset, wait for several minutes until the the phone start like new again.
source
BUT, instead of restarting, it takes me to philz touch recovery that I had installed after rooting. THen when I restart from there, it goes into the LG splansh screen and stays there forever. Can anyone help me with this?
Also, Philz touch recovey asks me to fix root before restarting. Is is necessary? I think selecting that option is causing the soft-brick.
Anybody have a clue?
Click to expand...
Click to collapse
thanks work on my f350s
i've got a Moto G X1032 rooted bootloader unlocked and it got stuck on boot( my phone is stuck on motorola logo) after trying to stall a Overclock Kernel
My battery is at 0%
and there's something i dont understand on your topic ( http://forum.xda-developers.com/showthread.php?t=1549625 )
''While in the ap fastboot screen with the low battery problem, just push & hold Vol - and Vol+ and power buttons at the same time for 10 seconds
-Then IMMEDIATELY press and hold Vol - and Vol+ for 10 seconds to get back to the boot menu.''
#Should i drop/release these three buttons( vol - and vol + and power ) then immediately press them again or just drop/release the power button?
And..
@ if i let my phone CHARGING it will stuck at 0% and after about 10 minutes it will turn on/boot automatically
@ i have already tried the factory cable but it didnt work for me
@ i also tried using the adb but it says Battery Low problem
@ rsd lite didnt recognized my phone even with the motorola drivers already installed
@ Using my phone on a laptop, when i enter the fastboot mode it shows ''battery low (charging). But using the outled/wall charger it shows only ''battery low'' but it makes noise if i remove it
battery isnt removable, help me out please
fernando15j said:
i've got a Moto G X1032 rooted bootloader unlocked and it got stuck on boot( my phone is stuck on motorola logo) after trying to stall a Overclock Kernel
My battery is at 0%
and there's something i dont understand on your topic ( http://forum.xda-developers.com/showthread.php?t=1549625 )
''While in the ap fastboot screen with the low battery problem, just push & hold Vol - and Vol+ and power buttons at the same time for 10 seconds
-Then IMMEDIATELY press and hold Vol - and Vol+ for 10 seconds to get back to the boot menu.''
#Should i drop/release these three buttons( vol - and vol + and power ) then immediately press them again or just drop/release the power button?
And..
@ if i let my phone CHARGING it will stuck at 0% and after about 10 minutes it will turn on/boot automatically
@ i have already tried the factory cable but it didnt work for me
@ i also tried using the adb but it says Battery Low problem
@ rsd lite didnt recognized my phone even with the motorola drivers already installed
@ Using my phone on a laptop, when i enter the fastboot mode it shows ''battery low (charging). But using the outled/wall charger it shows only ''battery low'' but it makes noise if i remove it
battery isnt removable, help me out please
Click to expand...
Click to collapse
Ok, wait, it's easy:
Your battery is 0% but you can still access the bootloader? Well, you have to:
1) put the phone in charge using the usb cable
2) check through the bootloader if it's being charged
3) if yes, turn off the phone
4) leave it in charge for 2-3 hours (at least)
5) turn it on and you should see "battery OK" status
6) now you can flash the stock firmware or something else to unbrick
only if this doesn't work you could think your battery is gone and you have to replace it (yep is replaceable).
Hi guys,
Today I've decied to upgrade my nexus 5 from 5.0.2 to 5.1 . Wanted to do it quickly ( ofc did a full backu and got it on pc ). But accidently wiped my whole sd card. So i thought "okay i still can do it easly since my pc does have all adb drivers and everythign working properly". So I used thsi feature in TWRP called adb sideload. Tried to sideload this nexus 5 5.1 ROM update.zip (http://forum.xda-developers.com/google-nexus-5/general/rom-n5-l-developer-preview-t2796003 ) But when it reached 11% it just wouldnt go any further. So I decided to stop it and maybe just adb push my rom file on to my device. So after holding down the power button for 10 secs. it rebooted. But now when I try to press vol down+ power it just reboots back into "google" screen logo same when i hold vol up + power. When I ve tried to hold vol down+ vol up + power it just showed black screen and my windows started to search for QHSUB_BULK drivers. So after he didnt find anything I just rebooted and now I am back on Google logo. Can you help me?
Now i tried once again to enter into recovery mode so I hold down vol down+ vol up + power button and when i turned down i just stoped holding power button and now the phone does not wake up after holding power button.
Okay managed to get it once again back on google logo screen. Now I am just gona wait for you to help me instaed on messing and experimenting around.
Well, people say that you learn on mistakes. I don't. While waiting for the answer here flicked through my old topci ( like 1 year ago ) when I did pretty similar thing to my phone. And the old solution did its work here aswell. So nevermidn my problem. Right now I am in fastboot mode and downloading newest stock images from google site.
Be careful, and update only with google factory images or ota. This is the safest way.