Hello, I have a problem with flashing stock rom to my Lenovo A536 phone and Alcatel Pop C7 phone. When I click on "Download" button in Sp Flash Tool, then connect my phone. Sp Flash Tool recognize my phone without problem but after 10 seconds it give error 4032 (Enable Dram Failed) and in another laptop I have "Timeout error".. I have tried many ROMs and many SP Flash Tool versions, but it didn't help.
Does anyone have same experience like me and successfully fixed that?
Thank you in advance.
Related
I have got a chinese clone phone with MTK6573V which was bricked by flashing a wrong firmware image via CWM-based custom recovery BUT after flashing the wrong firmware my phone cant even boot not even in recovery mode.Nor i am able to write Recovery via SP Flash Tool v2.1134.00 it always give me error :
BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)
[EMI]obtain DRAM Failed!
[HINT]lease check your load matches to your target which is to be download.
http://img838.imageshack.us/img838/3817/mtkerror.jpg
My phone is only able to make MTK PRELOADER PORT nothing else, no back light, no recovery mode
And now my phone also dont make MT65x3 USB VCOM Port so i am only able to connect phone with SP TOOLS when DA DOWNLOAD ALL is enabled otherwise it wont connect
mtk6573
hello there
i read your post and you has exacly the same problem im having with my phone.
did you manage to solve the problem?
if you did can you please help me out.
Thx
I have the same problem.
It`s bricked, nothing works and i cannot even upload the preloader or anything
EDIT : Upgraded to latest SP Flash tool and now i get a new error 5007
I have the same problem in MTK6575. Any solution?
B.R.
check the following link may be that will be helpful for you guys
http://www.labandroid.com/china/2013/02/flash-cwm-recovery-to-mtk-phones-without-sp-flash-tool/
Help me restoring my Lenovo A536, i reflashed my Lenovo A536 using SP Flash Tool but I didn't notice that the Firmware that i used was OTA Firmware.
Is there any other way to restore my Phone?
My phone is Dead and cannot access Recovery Mode. But my Laptop can recognized my Phone when i insert USB Cable into it. When i try reusing SP Flash Tools it cannot detect my phone now. but before SP Flash recognized my Phone.
Please Help me. Thanks.
Hello experts,
Pointing to the title, it is very clear that I am trying to install preloader to LG K120E model MT6735 without success. I was using SP flash tool to auto format the whole flash(bootloader included) and now the phone is dead, not even recognized by pc. downloaded prerooted ROM from here https://forum.xda-developers.com/android/general/rom-lg-k4-k120e-prerooted-stock-rom-t3545353 and tried to install the preloader, but it fails with BROM ERROR message 5054. What the f*** is this problem now, Can you experts help me on this?
My unite 2 is not charging,not switching not responding .I tried to flash it with sp flash tool but it stop after da download with error 4001.In flash tool it is not showing chip info.
No panic needed!
Don't worry mate! I also have gone through the same situation a lot of times!
Search for stock Firmware of Unite 2(Google)
Flash it using the SP Flash tool (But Don't Download this time search for an option Firmware Upgrade and then click download!)
After that you will get back your device!
If you like this post please hit Like Button that would be a great help!
Hey my phone is also bricked... Please tell me in details... can't do anything with sp flash tool. It also not detects my phone.
kng_santosh069 said:
Hey my phone is also bricked... Please tell me in details... can't do anything with sp flash tool. It also not detects my phone.
Click to expand...
Click to collapse
press vol- and connect with usb cable. wait preloader to be installed, start SPflash tool -> load scatter file MT6582(search on internet or ask me) click on download. follow instructions...
Voila! you will have phone with stock firmware..
Hello and first of all i'm not sure if this is the correct place to post my question if not sorry i am new here.
well i have a oukitel wp6 phone that all of a sudden went into factory mode loop tried reeboting, wipe and restore factory settings many times and nothng so decided to flash with sp tool fist tried with tool from original oukitel page with costum rom diidn't work, so tried with sp tool and MTK tool had problems with verification tried 3 diffrent rom including custom rom from original oukitel page, same problem so tried bypassing with libusb and bypass utility master and exploits original MTK USB VCOM drivers all seemed to go well but when tried to flash with sp flash tool i must have done something very wrong now my phone is dead no light no boot the sp flash tool doesn't even reconize the phone when i try to flash the boot loader. anyway my question is is this it or is there still a posibility to recover my phone?
any help will be very apreciated.
thank you,
angel
nobody? any ideas?