Hello XDA !,
So my friend's moto g 1st gen stopped booting up one fine day ,and got stuck the at the starting screen where there's the "Motorola" logo and underneath it is written "powered by android" , the phone was bootloader locked and untooted , he took it to some scammy repairer and he unlocked the boot loader and trued to install a custom recovery ,but it all didn't work out ,and the phone is now boot loader unlocked (status code 3) and still stuck at the Motorola logo screen and just stays there,I tried flashing the stock ROM from lost101's thread , It had the lollipop boot loader so I was aware if not flashing the KitKat one even by mistake ,so I flashed the lollipop ROM ,but since I didn't knew which version he had previously so I went with the 2nd to the most recent one which was present XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7[B/] since I considered it as a safe bet ,but to my surprise the first flashing command of "mfastboot flash gpt.bin" returned as "preflash validation failed ,remote failure" ,but when I looked at the phone it was written there in yellow lines "version downgraded for partition" and it said the same for flashing boot "version downgraded for boot" , the other files were flashed successfully ,but the device didn't boot!!...even after that ,please help me with a solution, I'd be grateful
Related
Let me explain my problem clearly----
I followed instructions mentioned on this thread completely and successfully installed 5.0
http://forum.xda-developers.com/moto-g/general/guide-install-5-0-t2964274
After that I rooted it.
After that i restarted and saw that "Unlocked Bootloader" message was still there. It was annoying.
So this is the step that i did wrong and i accept it. :crying: I flashed the boot.img file of moto g gpe xt1032 just to get Google Symbol at Boot
It went into Boot Loop and continuous restarts and directly getting into recovery.
I solved the restarting problem by reflashing the 4.4.4 Stock Retail Brazil Firmware and skipping the motoboot.img and boot.img files this time. But.......
And Now I'm stuck at boot image!!
Although I still have access to Bootloader and ADB Recovery.
Any Help to resolve this situation will be deeply appreciated!!
I'm ready to install any ROM with dual sim functionality.
Thanks in Advance!!
Hey all.
I started with a regular moto g XT1032 (sim free Irish bought), and followed this guide - http://forum.xda-developers.com/moto-g/general/gpe-ota-lrx21z-5-0-1-xt1033-xt1032-t2969847 to convert to GPE and install lolllipop.
After following the steps, the phone reboots and it stays on the Google boot logo with an unlocked padlock. When I boot into fastboot and look at the screen, it says "hab check failed for boot" in pink.
I have tried flashing CWM via MotoToolAIO and installing ROMs but that won't work either.
I seemed to have bricked the phone and I can't actually boot into android.
Could I get some help please? Thank you
I usually have the same problem when swapping between GPE and non-GPE, try this method: http://forum.xda-developers.com/showthread.php?t=2626803
Hi guys,
I have a Moto G2 currently and I have rooted it through KingRoot which was successfully done. After that, I had download the APK of Flash Image GUI and I tried to flash a custom recovery. After that, I tried to boot into recovery but it was showing:
hab check failed for recovery
failed to validate recovery image
Boot up failed
However, I can boot my phone up but it takes way way more time than it usually takes. My Bootloader is locked. I seriously dont know what's happened to my phone. Some plz help me. The phone shows the Motorola logo for few minutes and then turns off for a second and then boots up again and then after 5 minutes it boots up properly. I dont know how to unlock bootloader and all as I have just come from a Samsung S3 which was very easy to root and flash a recovery(thru Odin). I wanted to erase the user data in my phone. I tried thru recovery it didnt happen, i tried thru settings and it just tried to boot to recovery but couldnt and showed the above command. Plz help guys as I want a stock recovery or any other recovery so I can flash a custom ROM. I saw many forums and couldnt find a single problem like this so I came here .
Thanks a lot guys I just had to unlock the boot loader and return to stock 5.0.2 via a windowstool. I had bricked my device trying to install CM12.1 Nightly and the windows tool helped me so much u have know idea.
Hello all,
I have a Motorola moto g3 XT1541 Retail: europe
My problem is that i tried to flash epilson when i had cm 13 installed.
It did not work and now i am in a boot loop.
I was not thinking right and delete everything on my Phone including twrp and /system
Now i cant even use fastboot to flash the stock firmware because it will only give me errors or it will work and continue in the boot loop.
My boot loop goes like this: Motorola logo -> erasing.....(it goes in like a recovery and is erasing media and chache)
and then it will start all over again pls help
btw i also tried to install cm13 with no succes
I installed MIUI fastboot rom in my phone using platform tool and it got successfully flashed without any error but when it's time to boot my phone gets stuck into bootloop ( keeps turning on and off ). My bootloader is also unlocked. And the weird part is that I have used this method many times months ago to switch back to stock rom but I don't know why is it not working this time.
What is your device?