Hello all,
I have a Motorola moto g3 XT1541 Retail: europe
My problem is that i tried to flash epilson when i had cm 13 installed.
It did not work and now i am in a boot loop.
I was not thinking right and delete everything on my Phone including twrp and /system
Now i cant even use fastboot to flash the stock firmware because it will only give me errors or it will work and continue in the boot loop.
My boot loop goes like this: Motorola logo -> erasing.....(it goes in like a recovery and is erasing media and chache)
and then it will start all over again pls help
btw i also tried to install cm13 with no succes
Related
Installed kitkat+ rom from anerik, this resulted in a bootloop for my moto g, when it boots go directly to black screen and stays like that, can't even acces cwm recovery. tried the guide to restore stock firmware, also doesn't work, great! now I can't use my phone anymore.
When I try to flash stock firmware with guide, it says this:
Dont know what to do anymore really, can someone please help me?
now stuck at bootscreen....
Hey guys,
So, I have a Moto G which was first on a standard retail stock, but I tried to install a new ROM, so first I unlocked the bootloader and rooted it, and then when I tried to install CVM or TWRP instead of a normal recovery, it failed and when I tried to launch iit into recovery mode, the fastboot menu showed "boot up failed" in the logs.
So then I used MotoTools to install the GPE edition, it worked but then SIM card wasn't recognized, so I tried this http://forum.xda-developers.com/showthread.php?t=2542219 to reinstall the stock ROM and now I am stuck in bootloop with the GPE edition.
If anyone could help me, I would be really grateful.
Edit : Sorry for the lack of information at first, this Moto G is a 4g LTE so I could try something with a SD card, I tried also RSD Lite but it doesn't recognize my phone now.
Hey all.
I started with a regular moto g XT1032 (sim free Irish bought), and followed this guide - http://forum.xda-developers.com/moto-g/general/gpe-ota-lrx21z-5-0-1-xt1033-xt1032-t2969847 to convert to GPE and install lolllipop.
After following the steps, the phone reboots and it stays on the Google boot logo with an unlocked padlock. When I boot into fastboot and look at the screen, it says "hab check failed for boot" in pink.
I have tried flashing CWM via MotoToolAIO and installing ROMs but that won't work either.
I seemed to have bricked the phone and I can't actually boot into android.
Could I get some help please? Thank you
I usually have the same problem when swapping between GPE and non-GPE, try this method: http://forum.xda-developers.com/showthread.php?t=2626803
I was trying to flash cyanogenmod 12 on my moto g xt 1032 and it is stuck on the boot animation.
does anyone know how to unbrick it?
it's the consumer cellular version
http://forum.xda-developers.com/moto-g/help
Flash cm11 and boot up then dirt flash cm12 and gapps (optional) and wipe cache/Dalvik/data!!
Are you sure its stuck? The first boot after a wipe and flash takes a while.
...
I have the same issue on my moto g xt1033
my phone had kitkat before i tried to install cyanogenmod
had to update my bootloader's version to install it
same here will not show up on rds light also ..it does connect to computer as shows up in device manager but thats it can get it to bootloader more and thats it will not soft reset just comes up with error with power button and volume down so think its proper bricked can't think of any other way to fix it
Hi, My moto g (XT1032) was previously running Lollipop 5.02 with a custom kernel. Also using TWRP.
I was trying out a new kernel and rom, I backed up my phone before I did all this so I went ahead and tried to install CM12 this failed so I recovered from the back up and now I am stuck in a bootloop and can not access recovery.
As soon as I try to access recovery the TWRP splash screen appears but then boots normally!!
ADB is not recognising the device whether I use Moto adb drivers or universal ones!
Really need help, would greatly be appreciated!
(Just trying fast boot, will update if no success)
Liam
Amateur developer (tinkering with kernels )
I think you ****ed up
ADB commands only work in recovery or when the phone has fully booted the OS.
Have you tried to flash your phone's stock 4.4.4 ROM? Do not flash anything older.