Yesterday, I flashed the XtreStoLight addon package with Kernel. And now the phone does not start.
I don't have any roms or Backups on the s6.
PC does not connect and usb-sticks also not work.
It's an SM-g920F German without Sim Lock.
Can someone help me to make it working again?
Thank You!!!
What do you mean, by not starting up. It doesn't go trough SAMSUNG logo or it doesn't turn on at all
If it doesn't turn on at all, you must flashed faulty kernel, and your device is now a paperweight
Ragazzza said:
What do you mean, by not starting up. It doesn't go trough SAMSUNG logo or it doesn't turn on at all
If it doesn't turn on at all, you must flashed faulty kernel, and your device is now a paperweight
Click to expand...
Click to collapse
It doesn't show samsung logo but I can boot in recovery or download mode.
flash latest firmware 6.0.1 that have latest bootloader ? if pc can't recognize device reinstall samsung driver and after that turn off device and enter to download mode and odin can recognize your device if not try another usb hub or change cable
shiko2007 said:
flash latest firmware 6.0.1 that have latest bootloader ? if pc can't recognize device reinstall samsung driver and after that turn off device and enter to download mode and odin can recognize your device if not try another usb hub or change cable
Click to expand...
Click to collapse
That's also not working.
I used 3 usb-cables and all ports of two PC's
I also reinstalled the drivers.
if you can access to recovery try make full wipe (factory reset +wipe cash +wipe cash) also you try to enter to adb on recovery and try to connect device to pc and see if can recognize it or not
shiko2007 said:
if you can access to recovery try make full wipe (factory reset +wipe cash +wipe cash) also you try to enter to adb on recovery and try to connect device to pc and see if can recognize it or not
Click to expand...
Click to collapse
No that's also not working. The PC says theirs a Problem with the Device.
ok remove any drive of samsung, and reinstall again also install kies after that try again by turn off your device and stay 15 secound before turn on after turn on make full wipe again and restart and enter to download mode and try again if not work can you tell me what is your windows version? if windows 8 try windows 7
shiko2007 said:
ok remove any drive of samsung, and reinstall again also install kies after that try again by turn off your device and stay 15 secound before turn on after turn on make full wipe again and restart and enter to download mode and try again if not work can you tell me what is your windows version? if windows 8 try windows 7
Click to expand...
Click to collapse
This has not work. I have windows 10 and I can't install win 7.
Justinunderwood164 said:
This has not work. I have windows 10 and I can't install win 7.
Click to expand...
Click to collapse
I agree, try on win 7, why can't you install it?
Ragazzza said:
I agree, try on win 7, why can't you install it?
Click to expand...
Click to collapse
It isn't my PC. Have you any other Idea?
Justinunderwood164 said:
It isn't my PC. Have you any other Idea?
Click to expand...
Click to collapse
Only solution is odin man, would you rather be without your 500€ phone, or find a PC with a windows 7 installed. It isn't so hard man
yes bro , you must install windows 7 because of windows 10 you have can't reconigz your device
shiko2007 said:
yes bro , you must install windows 7 because of windows 10 you have can't reconigz your device
Click to expand...
Click to collapse
Tomorrow I can go to a friend he has a win 7 PC.
Thank you all for your help!
Justinunderwood164 said:
Tomorrow I can go to a friend he has a win 7 PC.
Thank you all for your help!
Click to expand...
Click to collapse
It still Not work.
Put your phone in Download Mode, open Samsung Kies, and go to Tools/Firmware Upgrade and Initialisation.
Enter your Model name (SM-G920x) and S/N
Let it do it's thing.
mildj84ns said:
Put your phone in Download Mode, open Samsung Kies, and go to Tools/Firmware Upgrade and Initialisation.
Enter your Model name (SM-G920x) and S/N
Let it do it's thing.
Click to expand...
Click to collapse
That isn't working
It says I have to connect my device but it is connected.
I believe you have corrupted bootloader area, try to keep forcing entering download mode, if still not working you will need motherboard replacement
Justinunderwood164 said:
That isn't working
It says I have to connect my device but it is connected.
Click to expand...
Click to collapse
If you are able to enter Download Mode, pay no attention to those messages from Kies, just do what i told you.
Connect your phone while in Download Mode and go to -Tools/Firmware Upgrade and Initialisation
God....
Install drivers first, they work on Windows 10. If it doesn't work, you have another problem somewhere we don't know.
Then, download SamFirm AND NOT UPDATO, launch the software then fill the boxes like you want (model, then region (means CSC)). CHECK BINARY NATURE
Once firmware is downloaded, you flash the 4 files firmware though Odin with Re-Partition and Nand Erase All ticked, and your phone will be alive again
Related
Hello!
I got a small problem with a galaxy fit. It does power on and it shows a computer and a phone with an exclamation mark between them.
The only thing that is accessible is the download mode.
Now in download mode odin gets stuck at "mibib download.." and it just keeps counting the time.
Does anyone have a clue about what to do to get the phone working again?
P.S.
This is my friends phone and i wasn't with him when the accident happened, but i understood that he might have tried cu flash something and Odin got stuck and he pulled the cable.
Thank you.
you must also come into recovery ...
if you cant flash it with odin 4.38 ... (in download-mode)
Than you make an data wipe/reset and wipe the dalvik...
And the phone is not bricked
n00b.androidDEV said:
you must also come into recovery ...
Click to expand...
Click to collapse
Can you please be more specific about this procedure? I'm not familiar with it.
Also a link to a tutorial would be greatly appreciated.
Thank you.
Can you come in recovery?
Press Power On + Home Button at once
If i press home+power it shows the same logo as just trying to switch on. I cannot use the recovery menu.
viperasp said:
If i press home+power it shows the same logo as just trying to switch on. I cannot use the recovery menu.
Click to expand...
Click to collapse
Try reinstalling the system. Press 3 buttons together. Power On + Home + volume Down. Prepare all the in Odin, connect phone with your PC, and Start in Odin.
cant we use odin_multi_downloader_v4.42 , beni.ops . why it must be odin 4.38 . are there any diferences
have you used odin 1.7 or 1.8?
galaxy tab versions!!
bcoz in my galaxy tab it comes when
odin fails!
but i can solve that problem by flashing
(dbdata.tar)file!!! only in mySAMGUNG
GALAXY TAB 7 ,not tried 4 fit yet ,but
with galaxy TAB it works,
you just have to do is put(dbdata.tar)in
the first of the Odin blank row that is
(PDA)and connect Tab to pc and press
"Start"
only works for galaxy TAB ,dont knw
abt fit!!!!
but 100% work for Tab
u can try this on fit ,i dont knw wat will happen!
it may work!!
djozaa said:
cant we use odin_multi_downloader_v4.42 , beni.ops . why it must be odin 4.38 . are there any diferences
Click to expand...
Click to collapse
I use Odin 4.38, and use Beni v1.0.ops. When on the phone display a yellow triangle to download I connect the phone to the computer and when the port is detected I click on Start and wait until it's over, and that to me takes about 5 minutes. When it is almost square in the port is blue.
may b u can use unisoft unbrick....just google it out..
i wil provide u wid some more info if u can just tel me if u can enter in recovery mode nd by the way wat recovery it is...the stock i mean samsung 1's or the clockworkmod recovery.....
I too faced similar problm..did u flash in windows 7??coz i had the same prob on win 7 then flashed in xp n worked..u must be admin inorder to use odin hope it helps u
vijayanandssj4 said:
I too faced similar problm..did u flash in windows 7??coz i had the same prob on win 7 then flashed in xp n worked..u must be admin inorder to use odin hope it helps u
Click to expand...
Click to collapse
To Odin work should be installed by the driver when the phone is connected to the computer. If you can not install the driver, Odin can not work, not port may be to open.
ZmisiS said:
To Odin work should be installed by the driver when the phone is connected to the computer. If you can not install the driver, Odin can not work, not port may be to open.
Click to expand...
Click to collapse
Hey bro by drivers do u mean samsung drivers???if yes then i do have samsung drivers in win 7 but still doesnt flash..win7 sucks it has more administration rights problems
viperasp said:
Hello!
I got a small problem with a galaxy fit. It does power on and it shows a computer and a phone with an exclamation mark between them.
The only thing that is accessible is the download mode.
Now in download mode odin gets stuck at "mibib download.." and it just keeps counting the time.
Does anyone have a clue about what to do to get the phone working again?
P.S.
This is my friends phone and i wasn't with him when the accident happened, but i understood that he might have tried cu flash something and Odin got stuck and he pulled the cable.
Thank you.
Click to expand...
Click to collapse
if ur sure it wont work...it may be surely bricked ..l had bricked too..fortunately..my fone's warranty was active...i gave to the samsung centre....they changed my motherboard for free due to the warranty!
vijayanandssj4 said:
Hey bro by drivers do u mean samsung drivers???if yes then i do have samsung drivers in win 7 but still doesnt flash..win7 sucks it has more administration rights problems
Click to expand...
Click to collapse
I have Windows 7 x64 and it is OK. On Odin you need go as Administrator. Drivers are installed automatically for me when I connect the phone and computer.
ZmisiS said:
I have Windows 7 x64 and it is OK. On Odin you need go as Administrator. Drivers are installed automatically for me when I connect the phone and computer.
Click to expand...
Click to collapse
Hmm i too have an admin account on win7 x64 still odin doesn't work for me...
vijayanandssj4 said:
Hmm i too have an admin account on win7 x64 still odin doesn't work for me...
Click to expand...
Click to collapse
Right click on Odin ...
Turn off your cell phone, press 3 buttons at once: Menu + Power + Down Sound, wait until the phone display a yellow triangle appears to download, when it appears, connect your phone to your computer and you should get this:
Fit goes to bootloop after flashing stock firmware
ZmisiS said:
Try reinstalling the system. Press 3 buttons together. Power On + Home + volume Down. Prepare all the in Odin, connect phone with your PC, and Start in Odin.
Click to expand...
Click to collapse
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
vijayf5 said:
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
Click to expand...
Click to collapse
goto recovery and wipe data & cache
remove bettery and switch it on again..
vijayf5 said:
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
Click to expand...
Click to collapse
Go in Recovery and it is enough to do the wipe data / recovery and reboot.
In Recovery you can go in a way that together press Home and Power buttons.
I'm trying to root a GT-P5110 with Android version 4.2.2 following the instructions at http://forum.xda-developers.com/showthread.php?t=1980683
Odin seems to be running ok, but Odin doesn't seem to be able to detect my device.
When I boot into recovery mode, I have a menu on the screen with the items "reboot system now", "apply update from adb", "apply update from external storage", "wipe data/factory reset", "wipe cache partition", and apply update from cache". Do I need to select one of them? I took a gamble on "apply update from adb", but Odin still doesn't see the device.
Can anybody give me any hints on what to try next?
Thanks,
digitig said:
I'm trying to root a GT-P5110 with Android version 4.2.2 following the instructions at http://forum.xda-developers.com/showthread.php?t=1980683
Odin seems to be running ok, but Odin doesn't seem to be able to detect my device.
When I boot into recovery mode, I have a menu on the screen with the items "reboot system now", "apply update from adb", "apply update from external storage", "wipe data/factory reset", "wipe cache partition", and apply update from cache". Do I need to select one of them? I took a gamble on "apply update from adb", but Odin still doesn't see the device.
Can anybody give me any hints on what to try next?
Thanks,
Click to expand...
Click to collapse
try latest usb samsng drivers
also if you are on win 8.1 then it might be a problem cos in win 8.1 odin is not recognizing nor my tab or phones[ ace and grand duos}
but install latest usb drivers it might work
aditya rathee said:
try latest usb samsng drivers
also if you are on win 8.1 then it might be a problem cos in win 8.1 odin is not recognizing nor my tab or phones[ ace and grand duos}
but install latest usb drivers it might work
Click to expand...
Click to collapse
The drivers seem to be up-to-date (I installed them from the Samsung website yesterday. I'm using Windows 8 (not 8.1, which won't play nicely with my laptop) so maybe that's the problem. Time to dig out an older computer, perhaps.
digitig said:
The drivers seem to be up-to-date (I installed them from the Samsung website yesterday. I'm using Windows 8 (not 8.1, which won't play nicely with my laptop) so maybe that's the problem. Time to dig out an older computer, perhaps.
Click to expand...
Click to collapse
try vmware ! with windows 7
download mode
i think your going. to recovey .try. pressing power+volume down.the your gonna get to th e download.its whre odin will flash
dharisd2 said:
i think your going. to recovey .try. pressing power+volume down.the your gonna get to th e download.its whre odin will flash
Click to expand...
Click to collapse
I am pressing power + volume down. I agree that the menu doesn't look like the one described.
(Incidentally, why do we need a captcha to post when we're logged in? I had to run through about 30 before I could find one I could even attempt, and the audio ones are even harder to decipher!)
You are doing it wrong.
Power on and push the volumebuton ( on the same time ) to the right.( UP )..and keep it that way til it boots up.
Than you get this screen
Then push the volumebuton to the left ( DOWN ), and then you are good to go
anabhi said:
try vmware ! with windows 7
Click to expand...
Click to collapse
Bro can you tell me what is the use of vmalware here the person is asking for help in rooting
aditya rathee said:
Bro can you tell me what is the use of vmalware here the person is asking for help in rooting
Click to expand...
Click to collapse
his pc isn't able to detect device(driver) ! winodows 8 have some driver installation issue ! that's why am saying vmware or virtual machine with win7 !
anabhi said:
his pc isn't able to detect device(driver) ! winodows 8 have some driver installation issue ! that's why am saying vmware or virtual machine with win7 !
Click to expand...
Click to collapse
That doesn't changes the way on how to come in the menu's of his tablet.
anabhi said:
his pc isn't able to detect device(driver) ! winodows 8 have some driver installation issue ! that's why am saying vmware or virtual machine with win7 !
Click to expand...
Click to collapse
But we can install sam usb drivers with compatibility settings i also do that
Odin will only flash when the device is in download mode. Flashing via recovery requires that you flash via .zip
Connection issue with GT P5110?!
Hi Guys,
trying to stick CWM on my gt 95110. got it into download mode but windows is no recognising the device? Have installed and reinstalled the drivers many time but nothing works. I've used different cables, run odin as admin.
Running on Windows 7
Please help!
If you have Kies installed try removing Kies from pc, restart pc, reload Samsung drivers then with Odin started hook up tab to pc.
If not recognized still, while tab is still plugged to pc reboot tab, it should do it.
Pp.
Already tried that and have just tried again. No luck
More info, what rom, what recovery what Odin. Is tab working properly.
Did you try a factory reset?
Pp.
It's the most recent version of odin I could find. I'll check the version number late when I get home later. With recovery do you mean cwm or the stock recovery on the tab?
I have restored tab to factory settings and tried what you suggested again this morning. Windows keeps on saying unrecognised device your device may have a fault. Can't see why this is the first time I've ever connected it to a pc since I got it. Tried every combination of kies and drivers installed and un-installed. Been through all the windows help suggestions. Have contacted samsung support but they take a lot longer to respond than the good people on xda.
Chezgals said:
It's the most recent version of odin I could find. I'll check the version number late when I get home later. With recovery do you mean cwm or the stock recovery on the tab?
I have restored tab to factory settings and tried what you suggested again this morning. Windows keeps on saying unrecognised device your device may have a fault. Can't see why this is the first time I've ever connected it to a pc since I got it. Tried every combination of kies and drivers installed and un-installed. Been through all the windows help suggestions. Have contacted samsung support but they take a lot longer to respond than the good people on xda.
Click to expand...
Click to collapse
Many times this is a bad cable or USB port on the computer. You might try changing those just to make sure. Then if that doesn't help you might even have to change computers.
Try a different cable, try a different pc.
Have seen cable that works with charger but not with pc.
Pp.
Thanks, have tried 2 cables. One was the original cable that's been in the box since I first got it. Have tried all usb slots and will try my girlfriends laptop tomorrow. I'll let you know how it goes.
I've also got a support ticket open with Samsung and they have offered a remote support session to try to resolve. Anyone had any experience with them? Hopefully one of these would resolve this.
Hello xda members
I have an GT-I9300 device which stucks on TWRP Recovery (teamwin logo excatly) and flashes about after 4 or 5 seconds.
No twrp options , my pc doesnt react when i plug in my phone , only download mode available and an SD Card.
Can i unbrick my phone or not ?
Hello,
Yes, you can flash your stock firmware through Odin 3.10 and fix your device. Look in the thread linked below for instructions, if the download link for your stock firmware is dead then try going to Sammobile.com and search for your stock firmware using your model number GT-I9300, download it and then follow the instructions below.
http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Good luck.
styno said:
Hi,
you can recover the GT-I9300 completely with Samsung's own Kies. It will ask for the serial number of the phone and will download all files needed and flash it for you.
You'll end up with a complete stock phone (but with latest modem )
Good luck!
Click to expand...
Click to collapse
Kies and Odin dont recognize my device
Any other suggestions?
Edixh said:
Kies and Odin dont recognize my device
Any other suggestions?
Click to expand...
Click to collapse
Have you verified that your drivers are installed correctly?
Post your issue in the forum I gave you the link to.
Droidriven said:
Have you verified that your drivers are installed correctly?
Post your issue in the forum I gave you the link to.
Click to expand...
Click to collapse
Yes bro i have installed them so many times and restarted PC but nothing happens when i plug in my device
styno said:
Just to be sure: you used kies3 - emergency recovery and got the phone into download mode?
Click to expand...
Click to collapse
Yes but kies and also kies3 doesnt start the process .
TDizzle329 said:
Are you putting the device into download mode?
Power the device off (pull the battery, then put the battery back in), then hold VOL DOWN + HOME KEY + POWER KEY
Once in download mode plug into your PC. Also make sure that you have the Samsung drivers installed. Check your device manager on your PC to make sure Windows is seeing the device.
Click to expand...
Click to collapse
I have done that but my pc doesnt even show any signs of my phone when i plug it in.
I looked at Device Manages also
Edixh said:
I have done that but my pc doesnt even show any signs of my phone when i plug it in.
I looked at Device Manages also
Click to expand...
Click to collapse
Try different USB ports, make sure you have the stock cable.
Howdy,
I've screwed up with installing a custom rom over another custom.
Now I'm getting an error:
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again.
It's a tablet:
Samsung Galaxy Tab 2 10.1 (p5100)
In my computer im using windows 10 pro, and adb device is not regonized.
What I neeed to do to get pasted that error?
Thanks for the help!
There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:
OOO thanks for the reply.
But I'm getting trouble to get into Download Mode, I mean I can't get in no matter what I do.
I've attacked a screen which I thing that Odin get's the device. Is this ok?
Thanks for the support!
_______
I've just flashed the TWRP recovery over the old one and know it works! YAY.... ODIN FTW
Zte blade l said:
There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:
Click to expand...
Click to collapse
Greetings;
I don't know if you already entered Download Mode...
Most problems accessing Recovery and Download Modes are due to having the USB Cable connected.
Remove the cable; press the key combination; and it will boot.
(Except if there's some incompatible ROM flashed by mistake).
After that plug the USB Cable again (if your USB Drivers have also installed for Download Mode) Odin will recognize it (like shown in your Screen Shot).
REMEMBER:
While Flashing do NOT Remove USB Cable, untill Odin Displays "Pass" message.
Further issues: Let us know. We're would be Glad to help.
I need help with my lg g stylo. I was using one click root Kingo root and when it was 66% done it was rebooting my phone into firmware download and my computer running Windows 10 froze to where I had to hard reset it, and my phone froze on firmware update. Now my phone is stuck in a bootloop on the LG life's good screen, I've tried hard resetting it ( with the volume down and power button combo) the Android guy pops up for one millisecond and disappears going back to the LG screen not doing anything the only other the only other thing I can do is go into downloading mode( while connected to a computer hold the volume button up) but when I do that my computer does not recognize my phone saying code 10 device cannot start up I have called LG they refused to help me get into recovery mode I have called Google Android support they don't know how to help I have also called windows trying to see if it was my computer's fault and they decided it wasn't I am kind of out of options I'm hoping someone knows how to help me I'll appreciate any help I can get thank you.
You need to download a MetroPCS KDZ and use rhe LG Flash Tool to flash the KDZ and bring your phone back to life.
I've tried that already I keep getting a Windows error code 10 device cannot power on I contacted windows and they said that is not my computer that is my device I have reinstalled my driver's serval times
Blairmathew071213 said:
I've tried that already I keep getting a Windows error code 10 device cannot power on I contacted windows and they said that is not my computer that is my device I have reinstalled my driver's serval times
Click to expand...
Click to collapse
To get into download mode you need make sure phone is 100% powered off then hold the volume up button and then plug in the usb cable. Dont release the power up button until the phone is fully in download mode not just the first screen. Also search for your phones adb drivers and install them to your pc not just the usb drivers. Make sure to uninstall any existing drivers first.
Thediesel1972 said:
To get into download mode you need make sure phone is 100% powered off then hold the volume up button and then plug in the usb cable. Dont release the power up button until the phone is fully in download mode not just the first screen. Also search for your phones adb drivers and install them to your pc not just the usb drivers. Make sure to uninstall any existing drivers first.
Click to expand...
Click to collapse
ok thank you i havent installed adb drivers yet ill let you know what happens
Blairmathew071213 said:
ok thank you i havent installed adb drivers yet ill let you know what happens
Click to expand...
Click to collapse
still not connecting to my pc uninstalled my usb drivers and reinstalled them and the adb drivers for my device my pc says " this device cannot start (code: 10)"
Blairmathew071213 said:
still not connecting to my pc uninstalled my usb drivers and reinstalled them and the adb drivers for my device my pc says " this device cannot start (code: 10)"
Click to expand...
Click to collapse
Did you try another pc with the adb drivers installed to see if you get the same error? If it connects on a different pc try this on the problem pc.
Open task manager
Click on the Hardware tab
Click the Device Manager button.
Expand Universal Serial Bus controllers section.
Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
Restart the computer, and allow the computer to reinstall the USB controllers.
Plug in the your phone in download mode and test to to see if the issue is resolved.
You can also download Ccleaner and fix any registry errors for free. I've used it for years and it works really well.
Still no joy. Try a system restore on your pc sounds like the device management could be screwed up.
All kinds of funky sh*t can happens when a pc crashes. You said you have windows 10 as a last resort you can do a system refresh which reinstalls the os but keeps your files.
Thediesel1972 said:
Try a system restore on your pc sounds like the device management is screwed up. Also you can download Ccleaner and fix any registry errors for free. I've used it for years and it works really well. All kinds of funky sh*t can happen when a pc crashes. You said you have windows 10 as a last resort you can do a system refresh which reinstalls the os but keeps your files. Id try ccleaner first.
Did you try another pc to see if you get the same error?
Click to expand...
Click to collapse
yes ive plugged it into a pc running win 7 and i already did a pc reset i did the option to clean everything im thinking about formatting my hard drive and do a clean install of windows ill look into the ccleaner and see if that helps ill let you know what happens thank you
Blairmathew071213 said:
yes ive plugged it into a pc running win 7 and i already did a pc reset i did the option to clean everything im thinking about formatting my hard drive and do a clean install of windows ill look into the ccleaner and see if that helps ill let you know what happens thank you
Click to expand...
Click to collapse
Did you check my edited post?
Thediesel1972 said:
Did you check my edited post?
Click to expand...
Click to collapse
yes i did and still nothing but i think i found a way through android studio
Android SDK manager cannot find my device either I tried looking it up to my port and USB locator
Everything you need can be found here in the LG G Stylo forums and if it's not here a google search will help.
You need...
MetroPCS 5.1.1 KDZ
LG drivers
LG Flash Tool
Download the KDZ. Install the LG drivers while you wait for the 1.2GB KDZ to be downloaded. Download the LG Flash Tool and when the KDZ has completed downloading run it as an administrator. Settings in Flash Tool should be fine. Point to the KDZ and begin the flash. Normal or CSE. Normal does not wipe data, CSE wipes all user data. You'll be prompted with something about your internet connection. Do not close this, the tool should be flashing the KDZ. Wait for the phone to be rebooted after flashing. Profit.
Mattix724 said:
Everything you need can be found here in the LG G Stylo forums and if it's not here a google search will help.
You need...
MetroPCS 5.1.1 KDZ
LG drivers
LG Flash Tool
Download the KDZ. Install the LG drivers while you wait for the 1.2GB KDZ to be downloaded. Download the LG Flash Tool and when the KDZ has completed downloading run it as an administrator. Settings in Flash Tool should be fine. Point to the KDZ and begin the flash. Normal or CSE. Normal does not wipe data, CSE wipes all user data. You'll be prompted with something about your internet connection. Do not close this, the tool should be flashing the KDZ. Wait for the phone to be rebooted after flashing. Profit.
Click to expand...
Click to collapse
Thats not his problem its his pc read the prior posts
I had the same problem once the device connected as download mode.
The kdz tool doesn't detected and crashed all the times. But miracle happens I kept playing(open&close)the kdz tool app. Somehow it detected and flash the kdz.
Android Studio was a bust still unable to find my device even with the code to direct information to the only USB device connected
Shimster said:
I had the same problem once the device connected as download mode.
The kdz tool doesn't detected and crashed all the times. But miracle happens I kept playing(open&close)the kdz tool app. Somehow it detected and flash the kdz.
Click to expand...
Click to collapse
I'll try that and see if it works thank you
Did you ever try a different pc and if so was it detected by windows
Thediesel1972 said:
Did you ever try a different pc and if so was it detected by windows
Click to expand...
Click to collapse
Yes I've tried and computer running windows 7. Adb cannot find my device.
Blairmathew071213 said:
Yes I've tried and computer running windows 7. Adb cannot find my device.
Click to expand...
Click to collapse
I was under the impression that the phone was entering dl mode but just not getting recognized by the pc. Either or you should bring it to a corporate store and tell them it boot looped while updating and play dumb. They should replace it since its under warranty. Or call lg and do it that way although its about a ten day wait.
Thediesel1972 said:
I was under the impression that the phone was entering dl mode but just not getting recognized by the pc. Either or you should bring it to a corporate store and tell them it boot looped while updating and play dumb. They should replace it since its under warranty. Or call lg and do it that way although its about a ten day wait.
Click to expand...
Click to collapse
My phone does enter download mode just can't do anything from there. ADB can't find device. I even found the port I'm in and tried to force into recovery but still no device connected.