Related
MICROMAX A78 ROOTED!!!
Guys!!! Micromax a78!! rooted!!!
So, here are the steps on getting root access on MICROMAX A78-
What you need
1. MICROMAX A78, data usb cable.
2. Download the Rooted Boot image file from the attachment below this post.
3. Download SP Flash Tool v2.1 from HERE.
4. Download MTK65xx Driver from HERE.
5. Download the MTK6573 Scatter.txt file from the attachment below this post.
6. Lastly download SuperOneClick root application for windows (search google), and install it...it will also install the adb drivers needed while rooting.
Installation Steps-
1. Unzip and Install the MTK65xx USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and connect using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Do not switch on the phone
2. Copy the "rootedboot.img" file that you downloaded from my attatchment. Rename it to be boot.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6573_Android_scatter. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "BOOT". Leave boot checked. Now click on the "BOOT" just right to the checkbox and browse and select the boot.img (which was earlier rootedboot.img) file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this then Congrats You have flashed the unlocked boot.img!
NOW FOR ACTUAL ROOTING:
1. Restart your phone, now when the phone boots up, enable "usb debugging".
2. Now run SuperOneClick, and click "root"..after the process finishes, the a78 will be fully rooted with Superuser app installed!!.
Check by installing root checker from play store!!!
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits!
I, Me, Myself
GUYS! If u think my hardwork is worth something, do press the "Thanks" button below! Thank You! :fingers-crossed:
awesome work !!!
thankyou buddy !!! my phone is finally rooted now waiting for a custom recovery ........
I'll also make a custom recovery if you are interested
Sent from my Micromax A110 using xda app-developers app
I will post the result after testing your method on my A78. Lets hope for something good
Bro!! You are the best.. Thanks a lot!!!
abs_dear said:
Bro!! You are the best.. Thanks a lot!!!
Click to expand...
Click to collapse
That's good to know! Any problems anybody faces,m always there
Sent from my Micromax A110 using xda app-developers app
WOOT WOOT
vshlkmr buddy you are the BEST :good:
i tried with SOC bt didnt wrk..n i ws worried to play with SP flash tool coz i dnt hv any alternt phone...excellent job man...
will root my phone ASAP n let u know if i get any problms..
it'll be perfect if you can provide CWM recovery...
THANKS again..
Hi,
Facing a strange issue and that too at very first step. When I am connecting the phone (Switched Off) to USB Cable after Driver Installation, Windows detects the device and tries to install MT65xx PreLoader. But after a few seconds, it shows the error: Device Unplugged.
Can you plz help to resolve this ?
Thanks,
Param
paramjeetgem said:
Hi,
Facing a strange issue and that too at very first step. When I am connecting the phone (Switched Off) to USB Cable after Driver Installation, Windows detects the device and tries to install MT65xx PreLoader. But after a few seconds, it shows the error: Device Unplugged.
Can you plz help to resolve this ?
Thanks,
Param
Click to expand...
Click to collapse
Ok, I am able to resolve this by Disabling Searching Windows Update for Device Drivers.
And, YES, I have rooted my A78
Big Big Thanks to vshlkmr
Phone Finally from rotted to Rooted
Thanks Buddy...
Phone is finally of some use now.
vshlkmr said:
I'll also make a custom recovery if you are interested
Click to expand...
Click to collapse
Yes, we are very interested. please make a custom recovery for a78.
Thanks
Links for
1. The Stock V3 is:
https://docs.google.com/uc?id=0B74b7RoIPJyfcVJKSzAtQUM5Q0k&export=download
2. SP Tool for A117 is:
http://d-h.st/tvi
3. USB Driver For A117 is:
http://www.mediafire.com/download/e6c4j3d8j6c5ui3/MTK+Universal+Drivers.rar
to Flash STOCK V3 with SP tool... follow the guide:
1. Download Flash Tool , Stock ROM AND USB Driver From Above LINK
2. Now install SP Tool drvers. see: http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
3. NOW Create Folder IN Desktop Give It Name "FLASH"
4. Copy All Downloaded File In Recently Created Folder "FLASH"
5. Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
6. NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
7. In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
8. Flashtool Automatic Select All IMGs AND FILEs
9. NOW Completely Turn Off Your Phone
10. In Flashtool..Click On "DOWNLOAD" Button
11. Install USB Driver AND Connect Your Device To Computer
12. If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
13. After All Process "GREEN CIRCLE" Appear In Center..
14. DISCONNECT PHONE AND POWER ON...THAT'S ALL
[instructions by Krunal32 and Rht555]
thats all.... enjoy
and if it helps.. PRESS THE THANKS BUTTON
checksum
PiyushGupta said:
Links for
1. The Stock V3 is:
https://docs.google.com/uc?id=0B74b7RoIPJyfcVJKSzAtQUM5Q0k&export=download
2. SP Tool for A117 is:
http://d-h.st/tvi
3. USB Driver For A117 is:
http://www.mediafire.com/download/e6c4j3d8j6c5ui3/MTK+Universal+Drivers.rar
to Flash STOCK V3 with SP tool... follow the guide:
1. Download Flash Tool , Stock ROM AND USB Driver From Above LINK
2. Now install SP Tool drvers. see: http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
3. NOW Create Folder IN Desktop Give It Name "FLASH"
4. Copy All Downloaded File In Recently Created Folder "FLASH"
5. Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
6. NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
7. In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
8. Flashtool Automatic Select All IMGs AND FILEs
9. NOW Completely Turn Off Your Phone
10. In Flashtool..Click On "DOWNLOAD" Button
11. Install USB Driver AND Connect Your Device To Computer
12. If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
13. After All Process "GREEN CIRCLE" Appear In Center..
14. DISCONNECT PHONE AND POWER ON...THAT'S ALL
[instructions by Krunal32 and Rht555]
thats all.... enjoy
and if it helps.. PRESS THE THANKS BUTTON
Click to expand...
Click to collapse
Hi,
Thanks for sharing. What's the valid checksum of Stock V3 ROM?
Checksum for STOCK V3
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Checksum for STOCK V3
PiyushGupta said:
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Click to expand...
Click to collapse
Thanks.
Drivers please help.
Please help me install the drivers.
I'm running Windows 8.1 and my phone is not being recognized.
I've followed all the steps properly but I'm not getting the phone to even show up on the device manager. SP tools refusing to detect. Thoroughly frustrated and wasted 3 days on this.
abhishekmaha said:
Please help me install the drivers.
I'm running Windows 8.1 and my phone is not being recognized.
I've followed all the steps properly but I'm not getting the phone to even show up on the device manager. SP tools refusing to detect. Thoroughly frustrated and wasted 3 days on this.
Click to expand...
Click to collapse
Use only latest sp flash tool.
But I did! Still not recognizing. Nothing's happening, and no yellow bar is coming.. I downloaded the latest version of sptools, tried about 6 different versions of drivers, but my phone is not visible even as an unknown device on the device manager.
abhishekmaha said:
But I did! Still not recognizing. Nothing's happening, and no yellow bar is coming.. I downloaded the latest version of sptools, tried about 6 different versions of drivers, but my phone is not visible even as an unknown device on the device manager.
Click to expand...
Click to collapse
Yo!!
well all the things worked properly for me as well as for another users..
soo @abhishekmaha did you installed the drivers from the given link or from any other source??
i insist you to download and install the drivers from here:
http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
Try it and then let me know.
i'll always be happy to help
PiyushGupta said:
Yo!!
well all the things worked properly for me as well as for another users..
soo @abhishekmaha did you installed the drivers from the given link or from any other source??
i insist you to download and install the drivers from here:
http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
Try it and then let me know.
i'll always be happy to help
Click to expand...
Click to collapse
ROM File size is 900 MB !1 Is it the right file ?
Download Error
PiyushGupta said:
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Click to expand...
Click to collapse
I tried to download this several times, but it fails at nearly 800MB. Please help.
@rubenhardy
Yes this is the Right file..
Dont worry it's checked by me and other users too.
@Myanju
No download error cuz of the link..
there may be some problem with you system or network..
you can see the screenshot about the successful download.
Network Error
PiyushGupta said:
@rubenhardy
Yes this is the Right file..
Dont worry it's checked by me and other users too.
@Myanju
No download error cuz of the link..
there may be some problem with you system or network..
you can see the screenshot about the successful download.
Click to expand...
Click to collapse
Hi,
I have attached screen shot of what i faced. please look into this and let me know what actions i should take.
Use IDM or some other downloder
Hi..
what are the features of stock v3.
does it mean kernal version
pls help
---------- Post added at 06:46 AM ---------- Previous post was at 06:39 AM ----------
what are its features....
Emergency calls only problem
HI there , firstly there was problem for invalid IMEI, i got it resolved by flashing sec_ro file again. but now its showing emergency calls only. my phone is able to detect SIM card but showing emergency calls only.
is there any modem patch that can help.
pls help.:crying:
XOLO Q3000 KITKAT 4.4.2 update
Kitkatify our beloved Q3000 before the official release.
Android kitkat 4.4.2 for MTK6589 devices is released.
This is a tutorial for all to install kitkat 4.4.2.
NOTICE
I Will Not Be Responsible For Any Brick or Any Problem.....
So Flash At Your Own Risk.
This ROM flashes every partition and DOES change anything.
SO chances of brick are ther but still, please keep nandroid Backup ready which will be used if you find issues in the process so that you can revert back to your old system.
Pr-requisites
Kitkat flash files from hadiyalkishan
SP flash tools
Mtk tools
MTK drivers
vcom drivers
scatter file
working computer or laptop with usb cable.
our beloved XOLO Q3000 with android JB off course.
little patience courage and slight brain.
So lets get started
1. Driver installation
install android usb drivers and vcom drivers.
Plug in ur mobile with usb cable when switch on. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off, after connection press power button once. let windows recognize it and install drivers.
You can skip above part if you already know what this all about.
2. Taking backups
Backup all ur apps, data installed.
Save all files from ur internal storage.
internal storage going to get formatted.
also backup ur nvram in mtktools (just in case for safty)
3. Preparation
Extract kitkat files in a separate folder.
shut down ur phone.
start SP Flash Tool v5.1352.01
load the scatter file from the folder.
If you using version 5.13 it will look like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if android is not selected please click on it and browse to folder and select system.img
uboot not present here. click it and select file named "LK"
If you using version 3.13 it will look like this
all files will be selected without issues
4. Flashing
start flashing procedure by pressing download button.
plug in ur powered off xolo Q3000.
There will green colored logo at the end off process.
if everything goes well its ok your done.
Just take out the phone.
remove battery once.
place it again
restart.
5. Trouble shooting
If at all there is any error in process please follow these steps
most common error that i faced was pmt changed error as shown below
or in 3.13
dont panic everything is under control
Now close spf tools
browse to the kitkat file folder
rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak
copy here the downloaded scatter file.
follow the flash procedure as mentioned above.
U will see a green coloured logo.:good:
congratulations.
You have kitkat now on your mobile.
5. Trouble shooting before restarting
Now pull out battery.
dont restart
put battery in
keep vol up button pressed and then press power button till xolo logo appers
release both button and
dont panic
just press power button once
You will go into stock android recovery
recovery option will come
just use vol down button for scrolling
select factory reset
press vol up button for execution
then select restart.
Your done.
6. Further Trouble shooting after restarting
Suppose accidentally in hurry u restarted mobile.
u will see nice boot animation and suddenly
Dont panic again
just press reset phone.
phone will restart
IF it wont go further press rest phone twice thrice
pull out battery and put in again and restart.
NOW enjoy ur kitkat 4.4.2 on xolo Q3000.
Goto settings-storage
You can clearly notice
The size of internal storage is around 4gb.
Thats why we need to backup internal storage as its get formatted in process.
If you browse apps you can see there is already super user app
It means it is prerooted.
6. Further Trouble shooting in kitkat
If at all superuser not working use root genius to root your phone.
Next most imp thing is sd card permissions.
its disabled in kitkat by defalut.
so u just use this app or manually put platform.xml in system/etc/permission ( u will get this anywhere just google)
another alternatives
1. KitKat SD Card Full Access.
2. HandleExternalStorage.
NOW ENJOY KITKAT FULLY.
If you have any query or doubts regarding whole procedure please feel free to pm.
Yes this process involves risk of bricking your phone, but thanks to mediatek as there chipsets are bootloader unlocked and we can revert back from any worst possible conditions.
CREDITShadiyalkishan - for the stock kitkat rom.
rufus.reynolds & Jagadish-ravi - for testing the whole procedure after showing faith in me:good:
m0han - for timely assistance and links provision.
Thank You...
Share Your experiences...
Reserved
Now thats exactly the way it is done....a perfect tutorial to get urself that Kitkat u have been waiting for.....thanks a lot Avi....
how to increase app install memory
I have cwm ,can I install this kitkat by cwm
Sent from my NOTE 3 using XDA Free mobile app
patilsb said:
I have cwm ,can I install this kitkat by cwm
Sent from my NOTE 3 using XDA Free mobile app
Click to expand...
Click to collapse
U cant flash it from cwm.
u have to use sp flash tools as everything has tobe changed.
avi,
i assume, this reverts any existing custom recovery back to xolo kk stock recovery. would sptool flashing custom recovery (ctr, twrp preferably) work? have you tried this?
baystallion said:
avi,
i assume, this reverts any existing custom recovery back to xolo kk stock recovery. would sptool flashing custom recovery (ctr, twrp preferably) work? have you tried this?
Click to expand...
Click to collapse
Yeah u can install custom recovery in kk.
Just see below in my signature - recovery collection.
sir ,i have error in installing;; "pmt change " again and again ,i change as your ...rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak " but error still stay. {my scatter image showing as -"MT6589_Android_scatter_emmc.txt.bak.txt "are they correct?]
any problem plz help me .
Error pmt change after rename scatter file
Sent from my NOTE 3 using XDA Free mobile app
patilsb said:
Error pmt change after rename scatter file
Sent from my NOTE 3 using XDA Free mobile app
Click to expand...
Click to collapse
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.
Updated successfully
avi3230 said:
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.
Click to expand...
Click to collapse
Updated successfully from 4.2.1 to 4.4.2
avi3230 said:
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.
Click to expand...
Click to collapse
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
ravi_21 said:
Updated successfully from 4.2.1 to 4.4.2
Click to expand...
Click to collapse
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?
patilsb said:
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?
Click to expand...
Click to collapse
Have u installed vcom drivers correctly?
Try using another version of flash tool.
patilsb said:
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?
Click to expand...
Click to collapse
Hi
Just follow these simple steps and you will be done.
1. Take out "scatter file" from main folder (File to Flash) and place where you can easily access that.
2. Run SP Flash tool
3. Select same “scatter file” which you have taken out from main folder
4. Once we take out the scatter file out from mail folder we break link between two files so Now select each file i.e. Preloader or Uboot in SP Flash tool manually to set their link back to normal.
5. Once all file given correct path click download
6. Connect your phone with or without batter (For me WITH battery)
7. If everything goes well after few seconds red line will appear that will turn in purple followed by yellow.
8. Once green circle appears that mean BINGO you are done.
---------- Post added at 10:36 PM ---------- Previous post was at 10:28 PM ----------
ravi_21 said:
Hi
Just follow these simple steps and you will be done.
1. Take out "scatter file" from main folder (File to Flash) and place where you can easily access that.
2. Run SP Flash tool
3. Select same “scatter file” which you have taken out from main folder
4. Once we take out the scatter file out from mail folder we break link between two files so Now select each file i.e. Preloader or Uboot in SP Flash tool manually to set their link back to normal.
5. Once all file given correct path click download
6. Connect your phone with or without batter (For me WITH battery)
7. If everything goes well after few seconds red line will appear that will turn in purple followed by yellow.
8. Once green circle appears that mean BINGO you are done.
Click to expand...
Click to collapse
If still facing issue then copy content of scatter file given in link and replace the content in downloaded file and do the whole process again.
Thanks ....sir great ...thanks for help me .it worked..
Sent from my Q3000 using xda app-developers app
---------- Post added at 11:15 AM ---------- Previous post was at 10:37 AM ----------
patilsb said:
Thanks ....sir great ...thanks for help me .it worked..
Sent from my Q3000 using xda app-developers app
Click to expand...
Click to collapse
But another problem "root asses goan" .there is superuser app. In my system ,but not working .unrooted phone-exSD card not mounted, can I root my divice by RootGenios?(but ex SD partition is mounted)
Sent from my Q3000 using xda app-developers app
avi3230 said:
XOLO Q3000 KITKAT 4.4.2 update
Kitkatify our beloved Q3000 before the official release.
Android kitkat 4.4.2 for MTK6589 devices is released.
This is a tutorial for all to install kitkat 4.4.2.
NOTICE
I Will Not Be Responsible For Any Brick or Any Problem.....
So Flash At Your Own Risk.
This ROM flashes every partition and DOES change anything.
SO chances of brick are ther but still, please keep nandroid Backup ready which will be used if you find issues in the process so that you can revert back to your old system.
Pr-requisites
Kitkat flash files from hadiyalkishan
SP flash tools
Mtk tools
MTK drivers
vcom drivers
scatter file
working computer or laptop with usb cable.
our beloved XOLO Q3000 with android JB off course.
little patience courage and slight brain.
So lets get started
1. Driver installation
install android usb drivers and vcom drivers.
Plug in ur mobile with usb cable when switch on. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off, after connection press power button once. let windows recognize it and install drivers.
You can skip above part if you already know what this all about.
2. Taking backups
Backup all ur apps, data installed.
Save all files from ur internal storage.
internal storage going to get formatted.
also backup ur nvram in mtktools (just in case for safty)
3. Preparation
Extract kitkat files in a separate folder.
shut down ur phone.
start SP Flash Tool v5.1352.01
load the scatter file from the folder.
If you using version 5.13 it will look like this
if android is not selected please click on it and browse to folder and select system.img
uboot not present here. click it and select file named "LK"
If you using version 3.13 it will look like this
all files will be selected without issues
4. Flashing
start flashing procedure by pressing download button.
plug in ur powered off xolo Q3000.
There will green colored logo at the end off process.
if everything goes well its ok your done.
Just take out the phone.
remove battery once.
place it again
restart.
5. Trouble shooting
If at all there is any error in process please follow these steps
most common error that i faced was pmt changed error as shown below
or in 3.13
dont panic everything is under control
Now close spf tools
browse to the kitkat file folder
rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak
copy here the downloaded scatter file.
follow the flash procedure as mentioned above.
U will see a green coloured logo.:good:
congratulations.
You have kitkat now on your mobile.
5. Trouble shooting before restarting
Now pull out battery.
dont restart
put battery in
keep vol up button pressed and then press power button till xolo logo appers
release both button and
dont panic
just press power button once
You will go into stock android recovery
recovery option will come
just use vol down button for scrolling
select factory reset
press vol up button for execution
then select restart.
Your done.
6. Further Trouble shooting after restarting
Suppose accidentally in hurry u restarted mobile.
u will see nice boot animation and suddenly
Dont panic again
just press reset phone.
phone will restart
IF it wont go further press rest phone twice thrice
pull out battery and put in again and restart.
NOW enjoy ur kitkat 4.4.2 on xolo Q3000.
Goto settings-storage
You can clearly notice
The size of internal storage is around 4gb.
Thats why we need to backup internal storage as its get formatted in process.
If you browse apps you can see there is already super user app
It means it is prerooted.
6. Further Trouble shooting in kitkat
If at all superuser not working use root genius to root your phone.
Next most imp thing is sd card permissions.
its disabled in kitkat by defalut.
so u just use this app or manually put platform.xml in system/etc/permission ( u will get this anywhere just google)
another alternatives
1. KitKat SD Card Full Access.
2. HandleExternalStorage.
NOW ENJOY KITKAT FULLY.
If you have any query or doubts regarding whole procedure please feel free to pm.
Yes this process involves risk of bricking your phone, but thanks to mediatek as there chipsets are bootloader unlocked and we can revert back from any worst possible conditions.
CREDITShadiyalkishan - for the stock kitkat rom.
rufus.reynolds & Jagadish-ravi - for testing the whole procedure after showing faith in me:good:
m0han - for timely assistance and links provision.
Thank You...
Share Your experiences...
Click to expand...
Click to collapse
hi avisir,
i install root genios and try 2/3 time but my phone not rooted [ error -root failed root manually]
what can i do for this? when i install kitkat, that time i saw super user then i update Vroot,...then unfortunetlly super user goan.
i tried framroot /mtkdroid tool but no effect....
Root doesn't seem to be persistent. I uninstalled the superuser app immediately after installing the ROM. After this, I flashed ctr custom recovery using sp flash tool, downloaded and flashed SuperSU from recovery.
baystallion said:
Root doesn't seem to be persistent. I uninstalled the superuser app immediately after installing the ROM. After this, I flashed ctr custom recovery using sp flash tool, downloaded and flashed SuperSU from recovery.
Click to expand...
Click to collapse
U shuoldnt had done it?
U should install supersu app first and then reboot and uninstall the original superuser.
try using vroot, eroot or root geniuos.
avi3230 said:
U shuoldnt had done it?
U should install supersu app first and then reboot and uninstall the original superuser.
try using vroot, eroot or root geniuos.
Click to expand...
Click to collapse
Avi, well it just worked for me.. I currently have a working SuperSU install following the procedure I'd mentioned
Just so we are clear, the problem here is that, once kk ROM is installed, the superuser app will show that the phone is rooted. After some time, opening the app will show that the phone is unroofed.. I'm sure this is not an issue with the super user app but something else.. But flashing SuperSU as I said in my last post fixes root which is what I wanted..
If you know the actual root cause, I want to know about it..
Hello Guyz,
As no Dev. Has been made a recovery for a12* at last after lots of efforts...
I developed A Recovery For Our Devices
A waiting is over
Introducing All new
"Philz Recovery" Only By me for
Karbonn A12*(Star)
link for recovery: https://drive.google.com/file/d/0BxQZF8lqd-BHaE8yRGtUekI0Snc/view
Software to flash recovery : https://github.com/DsLNeXuS/Rashr/...aad14/RashrApp/RashrApp-release.apk?raw=true
Known issues : Touch not working properly but u can use volume keys to move up and down and power key for selection...
Every thing else working well if u find any issue than u can comment below or message me on fb..
How to disable touch on recovery :
Just boot into recovery... select Recovery setting and then go to Gui setting and disable touch....
Now will discuss how to flash recovery
Steps:-
There Are 2 wayz to install this recovery...
I. INSTALLATION WITHOUT PC
1: download mobileuncletool or flashify from playstore or link given by me.
2: open mobileuncletool or flashify n click on update recovery n wait for completion.
3: After completion boot into recovery mode..
II. INSTALLATION WITH PC
1: Download spflash tool for pc n download scatter file for MT6572 devices n install all mtk drivers on pc.
2: Open spflash tool n load the scatter file that u have downloaded above.
3: Tick on recovery n then select recovery.img n click on download.
4: Now plug usb with ur pc n connect phone without battery n then connect usb cable with phone and insert the battery.
5: Installation process will start automatically n wait for completion..
THIS IS MY SECOND WORK FOR KARBONN A12*
ENJOY CWM BASED RECOVERY
Join my grp on Facebook
Karbonn Smart A12 Star Official
(Development & Discussion) https://m.facebook.com/groups/718681911514380?refid=18&__tn__=C
Hit thanks to appreciate my work... :thumbup:
Recovery for K12*
thanku bro....
Installation with mobileuncle tool
Ui of PhilZ recovery
Hello dear all,
after a long time of rush around different solutions I finally figure it out how to hard brick Indian le max x900
(note hard brick means ur phone is completely dead no charging,no restart, no fastboot etc....becoz of may be wrong rom flashing)
1. Install qualcom driver and latest qpst 2.7 (link: https://androiddatahost.com/np4wq)(qualcomm driver present in qfil file for x800 link in step4)
2. Installed qpst will be present at c:/program files(x86)/qualcomm/qpst/bin....inside it find qfil flashing application...open it
3. connect ur dead indian le max to computer and see if qualcomm usb driver can detect it(u may notice qfil flashing appln will also show some com no connected)....if u r unsuccessful just press both volume key/or power key and both vol key at a time for around 1 min when phone is connected to pc. (in any case u failed no big issue try to install it manually by searching in google, well I have used win10 and it simply worked for me)
4. Download the qfil file for x800 and extract it somewhere, it also have qualcomm driver inside it so once extracted install that driver too (link: https://mega.nz/#!G0ozxZwb!vowHBNjQGC1AtVOx2ThrWpYt6yHEnAACFvq90XDF4n0)....actually i tried qfil for x900,x1, line brush tutorials etc but none of those worked for me and x800 aks le 1 pro have the same processor so it can make x900 alive....sahara error all the time... ( a big thx to UNBRICK X800 X900 Started by mxmax in leeco.re)
5. if all done correctly u can see ur dead indian lemax phone connected to qualcomm mode with some com no, that u can notice in qfil flashing appln.
6.in the flashing appln select Flat Build,
in browse select ur extracted qfil x800 folder (path\qfil x800\x1_na_dvt1_fastboot\prog_emmc_firehose_8994_lite.mbn,
in load xml select rawprogram_unsparse (present inside folder x1_na_dvt1_fastboot)....after that patch0 that automatically comes,
than finally click on download....u can see process started and once completed exit it.
7. So now ur phone have qfil of x800 flashed, try to boot it by pressing power button for 1 min.....u can see blue led blinked and ur phone start to boot (if not means ur phone's battery is very less simply connect it with charger by pressing power button u can see phone starts to show orange led flashing after some time....ie it start charging)
8. once it start in step 7 the phone show chinese letv logo...but it doesn't boot becoz it is for x800 not x900....phone simply tries to boot again and again...so once the phone start to reboot by itself simply press power button and vol down key at a time....u can see small penguin that means ur phone is in fastboot mode.
9. its time now to install twrp 3.0 to ur x900 connected to pc in fastboot mode(link: https://www.androidfilehost.com/?fid=24533103863139522)...simply install twrp from link extract it open the twrp installer appln ....and install it by pressing backspace key that u find during instrution)....great thing about twrp recovery is it can charge ur phone too while connected to power source.
10.So after step 9 ur phone should be in twrp 3.0 recovery mode....u can see internal storage of it shows in pc of around 10 gb not 52 gb.....so inside twrp\wipe\format data...type yes, and advanced wipe select all and wipe......once done u have 52 gb avail in internal storage that u can see in ur pc too.
11. put indian version any rom inside ur internal storage and flash it...once done ur phone will successfully rebooted links for roms are below...simply download any as per ur choice
https://drive.google.com/file/d/0B6m-wM0vYiL8U0U4cUhUM2NlMGc/view (this is stock 12s rom)
https://www.androidfilehost.com/?fid=24533103863139959 (this is also stable 12s rom made bu cuoco with extra settings and dolby presinstalled)
http://evolutionletvx900.blogspot.in/ (this will give u link for 12s and 13s rom which have nova and google launcher preinstalled)
flash any rom and if any any file after flashed make big vibrate ur phone with blue led on...don't panic...simply press power button for long time it will reboot ur phone
I request to make support for Indian x900 also since we cant able to install eui 5.8 based roms....tried to install several roms by deleting lines for check in update-script...even though it installed make it brick/dead again...so plz help for android 6
It Stuck in Leeco logo powered by android
Hello Rahul Raj
Thanks for the instructions to hard brick LeMax X900
I have done as per the instructions provided by you. But it boots and it get stuck in the leeco powered by android in display it never goes further. Please let me know what is the issue.
Rahulraj2012 said:
Hello dear all,
after a long time of rush around different solutions I finally figure it out how to hard brick Indian le max x900
(note hard brick means ur phone is completely dead no charging,no restart, no fastboot etc....becoz of may be wrong rom flashing)
1. Install qualcom driver and latest qpst 2.7 (link: https://androiddatahost.com/np4wq)(qualcomm driver present in qfil file for x800 link in step4)
2. Installed qpst will be present at c:/program files(x86)/qualcomm/qpst/bin....inside it find qfil flashing application...open it
3. connect ur dead indian le max to computer and see if qualcomm usb driver can detect it(u may notice qfil flashing appln will also show some com no connected)....if u r unsuccessful just press both volume key/or power key and both vol key at a time for around 1 min when phone is connected to pc. (in any case u failed no big issue try to install it manually by searching in google, well I have used win10 and it simply worked for me)
4. Download the qfil file for x800 and extract it somewhere, it also have qualcomm driver inside it so once extracted install that driver too (link: https://mega.nz/#!G0ozxZwb!vowHBNjQGC1AtVOx2ThrWpYt6yHEnAACFvq90XDF4n0)....actually i tried qfil for x900,x1, line brush tutorials etc but none of those worked for me and x800 aks le 1 pro have the same processor so it can make x900 alive....sahara error all the time... ( a big thx to UNBRICK X800 X900 Started by mxmax in leeco.re)
5. if all done correctly u can see ur dead indian lemax phone connected to qualcomm mode with some com no, that u can notice in qfil flashing appln.
6.in the flashing appln select Flat Build,
in browse select ur extracted qfil x800 folder (path\qfil x800\x1_na_dvt1_fastboot\prog_emmc_firehose_8994_lite.mbn,
in load xml select rawprogram_unsparse (present inside folder x1_na_dvt1_fastboot)....after that patch0 that automatically comes,
than finally click on download....u can see process started and once completed exit it.
7. So now ur phone have qfil of x800 flashed, try to boot it by pressing power button for 1 min.....u can see blue led blinked and ur phone start to boot (if not means ur phone's battery is very less simply connect it with charger by pressing power button u can see phone starts to show orange led flashing after some time....ie it start charging)
8. once it start in step 7 the phone show chinese letv logo...but it doesn't boot becoz it is for x800 not x900....phone simply tries to boot again and again...so once the phone start to reboot by itself simply press power button and vol down key at a time....u can see small penguin that means ur phone is in fastboot mode.
9. its time now to install twrp 3.0 to ur x900 connected to pc in fastboot mode(link: https://www.androidfilehost.com/?fid=24533103863139522)...simply install twrp from link extract it open the twrp installer appln ....and install it by pressing backspace key that u find during instrution)....great thing about twrp recovery is it can charge ur phone too while connected to power source.
10.So after step 9 ur phone should be in twrp 3.0 recovery mode....u can see internal storage of it shows in pc of around 10 gb not 52 gb.....so inside twrp\wipe\format data...type yes, and advanced wipe select all and wipe......once done u have 52 gb avail in internal storage that u can see in ur pc too.
11. put indian version any rom inside ur internal storage and flash it...once done ur phone will successfully rebooted links for roms are below...simply download any as per ur choice
https://drive.google.com/file/d/0B6m-wM0vYiL8U0U4cUhUM2NlMGc/view (this is stock 12s rom)
https://www.androidfilehost.com/?fid=24533103863139959 (this is also stable 12s rom made bu cuoco with extra settings and dolby presinstalled)
http://evolutionletvx900.blogspot.in/ (this will give u link for 12s and 13s rom which have nova and google launcher preinstalled)
flash any rom and if any any file after flashed make big vibrate ur phone with blue led on...don't panic...simply press power button for long time it will reboot ur phone
I request to make support for Indian x900 also since we cant able to install eui 5.8 based roms....tried to install several roms by deleting lines for check in update-script...even though it installed make it brick/dead again...so plz help for android 6
Click to expand...
Click to collapse
Hi,
Please share me ur qfile and installation method.
i getting sahara error...
my max 1 bricked...
Help
Please i have done it perfectly but my phone is 128GB after unbrick it available storage is 8gb but I don't have any files in the phone to delete so please help me to space my phone if any idea to free it please help
Rahulraj2012 said:
Hello dear all,
after a long time of rush around different solutions I finally figure it out how to hard brick Indian le max x900
(note hard brick means ur phone is completely dead no charging,no restart, no fastboot etc....becoz of may be wrong rom flashing)
1. Install qualcom driver and latest qpst 2.7 (link: https://androiddatahost.com/np4wq)(qualcomm driver present in qfil file for x800 link in step4)
2. Installed qpst will be present at c:/program files(x86)/qualcomm/qpst/bin....inside it find qfil flashing application...open it
3. connect ur dead indian le max to computer and see if qualcomm usb driver can detect it(u may notice qfil flashing appln will also show some com no connected)....if u r unsuccessful just press both volume key/or power key and both vol key at a time for around 1 min when phone is connected to pc. (in any case u failed no big issue try to install it manually by searching in google, well I have used win10 and it simply worked for me)
4. Download the qfil file for x800 and extract it somewhere, it also have qualcomm driver inside it so once extracted install that driver too (link: https://mega.nz/#!G0ozxZwb!vowHBNjQGC1AtVOx2ThrWpYt6yHEnAACFvq90XDF4n0)....actually i tried qfil for x900,x1, line brush tutorials etc but none of those worked for me and x800 aks le 1 pro have the same processor so it can make x900 alive....sahara error all the time... ( a big thx to UNBRICK X800 X900 Started by mxmax in leeco.re)
5. if all done correctly u can see ur dead indian lemax phone connected to qualcomm mode with some com no, that u can notice in qfil flashing appln.
6.in the flashing appln select Flat Build,
in browse select ur extracted qfil x800 folder (path\qfil x800\x1_na_dvt1_fastboot\prog_emmc_firehose_8994_lite.mbn,
in load xml select rawprogram_unsparse (present inside folder x1_na_dvt1_fastboot)....after that patch0 that automatically comes,
than finally click on download....u can see process started and once completed exit it.
7. So now ur phone have qfil of x800 flashed, try to boot it by pressing power button for 1 min.....u can see blue led blinked and ur phone start to boot (if not means ur phone's battery is very less simply connect it with charger by pressing power button u can see phone starts to show orange led flashing after some time....ie it start charging)
8. once it start in step 7 the phone show chinese letv logo...but it doesn't boot becoz it is for x800 not x900....phone simply tries to boot again and again...so once the phone start to reboot by itself simply press power button and vol down key at a time....u can see small penguin that means ur phone is in fastboot mode.
9. its time now to install twrp 3.0 to ur x900 connected to pc in fastboot mode(link: https://www.androidfilehost.com/?fid=24533103863139522)...simply install twrp from link extract it open the twrp installer appln ....and install it by pressing backspace key that u find during instrution)....great thing about twrp recovery is it can charge ur phone too while connected to power source.
10.So after step 9 ur phone should be in twrp 3.0 recovery mode....u can see internal storage of it shows in pc of around 10 gb not 52 gb.....so inside twrp\wipe\format data...type yes, and advanced wipe select all and wipe......once done u have 52 gb avail in internal storage that u can see in ur pc too.
11. put indian version any rom inside ur internal storage and flash it...once done ur phone will successfully rebooted links for roms are below...simply download any as per ur choice
https://drive.google.com/file/d/0B6m-wM0vYiL8U0U4cUhUM2NlMGc/view (this is stock 12s rom)
https://www.androidfilehost.com/?fid=24533103863139959 (this is also stable 12s rom made bu cuoco with extra settings and dolby presinstalled)
http://evolutionletvx900.blogspot.in/ (this will give u link for 12s and 13s rom which have nova and google launcher preinstalled)
flash any rom and if any any file after flashed make big vibrate ur phone with blue led on...don't panic...simply press power button for long time it will reboot ur phone
I request to make support for Indian x900 also since we cant able to install eui 5.8 based roms....tried to install several roms by deleting lines for check in update-script...even though it installed make it brick/dead again...so plz help for android 6
Click to expand...
Click to collapse
the rom is X900 android 6 google play store , it will help you .
https://www.needrom.com/download/le...languages-rom-unbrick-firmware-qfil-fastboot/
tony770101 said:
the rom is X900 android 6 google play store , it will help you .
https://www.needrom.com/download/le...languages-rom-unbrick-firmware-qfil-fastboot/
Click to expand...
Click to collapse
he is protected it with password do you have pass word please
Prefect solution for bricks or le max x900
Bhai aapka jitna shukriya kya jaaye kam h kya jabardust link diya h Na Qualcomm ki jarurat Na qpst ki ek hi link me sab kuch
I have flash three time wrong rom
But your link is really great full
Thanks
Thanks a lot big B ?
Pls provide me max x900 stock rom there link is show corrupt file thanx
not working error sahara
stefdfghhfdf said:
not working error sahara
Click to expand...
Click to collapse
This Sahara Protocol error is really a nasty one. The only way I was able to avoid it was to perform fresh Windows 7 installation on another notebook and install the flashing apps there. I've tried on 5 different Windows 10 systems and it never worked on them. But now I'm fighting with finding the proper ROM for the 128GB X900 version. All the ROMs I've installed so far are bricking again the phone.
I have tried 4 different computers with different os, windows 7 32bit, 64bit and windows 10 64bit, 2 notebook fresh install windows 7 32bit and windows 10 64bit still get sahara error, it seems it won't run as firehose mode, it needs somethimg to switch to make firehose mode on my x900+
Needs help would be appreciated
leeco max x900
I have a leeco max x900 and it died, maybe you need help unbrick, thank you very much