Hello Everyone
I use YU Yuphoria 5010 since more than a year with original cyanogenmod updated via updater to 12.1 without root and locked bootloader.
Since a month i have been facing force closure in many apps so i downloaded the cyanogenmod 12.1 reovery rom and did dirty flash via recovery solved settings app force closure but not all FC. Then I decided to clean flash a custom rom since cyanogenmod is closed now and also lineage and Yuos have no Volte support.
For this i read many posts forum properly unlocked my Yuphoria with Doomlord's method then rooted it and then flashed TWRP 3.0.0.0 on it and then did clean install of MIUI by Gaggu,and then Rohan successfully and used them but volte was not working. Then flashed stock rom by Yukick and everything (volte + vilte) was working fine exceptfor phone shutting down at 40% of battery.
Then decided for resurrection remix (5.8.1) and flashed it successfully. Tested it for three days some force closure were there also Vilte (not Volte) also not woking. Then saw a RR update (5.8.2) on resurrection remix download page for Yuphoria downloaded it and first time done a dirty flash (every previous flash was a clean flash this time I thought i am already on RR so no problem should be there).
There starts my problem the phone stuck at YU logo then tried to enter the Twrp recovery but could not. So flashed twrp via fastboot again and then wiped cache, delvik cache but no use could not start the phone. so tried to clean flash original cyanogenmod 12.1 rom ( that i used as for dirty flash many times to rectify some fc before) but could not.
Then read many threads on Yu forum and XDA forum and tried many things but no use.
Now the present condition is i can enter Fastboot mode by pressing vol up + power button with
cyanogen fastboot written on screen and can execute various fastoot commands but cannot flash rom as
Fastboot -i 0x2a96 flash system system.img
fail to write system.
I can't enter recovery with vol down + power button (after i entered the command Fastboot erase recovery previously i can enter the recovery by pressing vol down + power button, I did so to replace the TWRP with CWM recovery but no success) Phone starts YU logo appears for some time and then Blank screen.
But i can enter recovery via Fastboot with command
Fastboot -i 0x2a96 boot twrp_3.0.0.0_lettuce.img
but in twrp cannot mount system, data and cache partition tried various things like full wipe and repair file system change file system but no use. Twrp shows intenal storage 0 mb. also cannot flash other custom recovery if i try to flash other custom recovery via fastboot it says ok but cannot boot into recovery but when tried to enter via fastboot command phone enters in cyanogenmod recovery. it can also boot in recovery of Fastboot stock rom via fastboot command.
Fastboot -i 0x2a96 oem device-info
shows
device tampered false,
device unlocked true,
Charger screen enabled true.
I can lock the bootloader also by command
Fastbbot -i 0x2a96 oem lock
then device-info shows
device unlocked false
(without bootloader restart if restarted it shows device
unlocked true).
when enetered in TWRP 3.0.0.0 via fastboot command the phone is also shown as MTP device in Windows but only memory card is shown as storage no internal storage.
if i try to start the phone by pressing power button it stucks at YU logo.
if i connect the phone to computer while it is poweroff it is shown as Android Phone (Android
bootloader interface) in Device manager on my windows 7 laptop.
any other information or screen shot if needed I will provide.
Thanks in advance
For me also same error, possibly because of Flash memory life cycle end.
Related
Hello everyone!!
After doing a lot of extensive research I finally decided to flash Cyanogenmod 11 on my device (btw it's Moto G XT1033). I followed all the instructions of an xda member. Unfortunately my phone fails after flashing the recovery image. It shows on the cmd prompt that the flashing was successful but everytime I go to recovery mode I am no longer able to access the recovery.img
All I get is a blank screen with occasional blanks, freezes and various types of patterns on the screen. I followed each and every instruction to the letter still I do not know why this is happening. cannot even access the default bootloader now!
Here are the steps I used:
1. Unlock the bootloader
2. Installed adb and fastboot and copied the img file to the adb directory
3. Restarted my phone to the boot menu
4. used the command "fastboot flash recovery recovery.img"
5. got a message that the operation was successful.
However after these steps, I am unable to access the cwm bootmenu. Even the default one is no longer accessible.
Please help!!!:crying::crying:
After flashing recovery, do not reboot the phone. Use the phone's volume buttons to enter fastboot from the phone's fastboot menu.
I would install trwp instead.
I agree on Kannz2's suggestion for TWRP.
AFAIK, the recovery you're trying to flash is closed sourced and is no longer being updated.
Here's a link to TWRP:
http://techerrata.com/browse/twrp2/xt1032
Link to ADB and Fastboot that I use:
http://forum.xda-developers.com/showthread.php?t=2588979
hey , i just installed wrong rom in my moto G , i suppose to install xt1032 but i installed xt1033 and now my phone isn't booting , it's constantly showing me android logo for very long time. When i try to go back to recovery to install another rom , its just flashed teamwin recovey starting wallpaper and without entering in , it reboots into system.Since my system is not loading i am stucked between this. Please help me mymodel no is xt1032 motorola 8 GB
Hi,
Power down your phone and power up by pressing power and volume down buttons, you'll enter bootloader mode.
Connect the phone to your computer and flash again recovery with fastboot commands...
Let us know
You may need to use the following fastboot command:
fastboot erase userdata
Note: Internal storage will be wiped; photos, music etc get erased.
hi my oneplus 7 pro 1910 stuck at bootloader and when i press start or recovery it gets back to the bootloader screen i cant even turn off the phone
i accidentally wiped all partitions in twrp and made a format .
anyhelp ? ive tried to do the fastboot rom flash but my pc doesnt detect my phone
i tried almost every solution i found but nothing works
Your bootloader needs to be unlocked to use a fastboot ROM.
Is it unlocked?
@soka said:
Your bootloader needs to be unlocked to use a fastboot ROM.
Is it unlocked?
Click to expand...
Click to collapse
Yes it’s unlocked , any help
Search on the fast boot rom thread for the fast boot rom version you were last on, i have used this many times and it worked.
One thing to note, after it flashed everything , I ended up in crash dump error. I went into stock recovery and wiped/formatted my device and it boot up great.
https://forum.xda-developers.com/t/msm-tool-guac-for-all.3934691/ - just follow this guide
One thing that worked for me is when your phone is plugged into your pc open a command prompt and type fastboot boot twrp-*.img (make sure it is the .img not .zip), and from there download the twrp installer .zip and flash that, reboot to recovery, and install the OTA for your device (OTAs can be found at this thread).
If it fails to boot and gives you an error, try fastboot getvar all to see which slot is currently active then do fastboot --set-active=*inactive slot letter* then fastboot --set-active=*original active slot letter* then try to boot to the twrp .img from fastboot again. If fastboot doesn't detect your device at all, try seeing if adb devices outputs anything, and if it does type adb reboot bootloader
Hello all,
I bought a refurbished LG G5 (H850) from Aliexpress in order to move it to LineageOS. It has a stock LG Android 8.0.0 (V30f-EUR-XX). I unlocked the bootloader with the file unlock.bin that LG sent me and I can read in fastboot unlocked:yes.
The problem is that I cannot reboot in Recovery mode. I tried :
- when booting in the original LG Recovery: message "No command" with the resting Android robot icon
- I flashed lineage-17.1-20210110-recovery-h850.img successfully and when booting in this recovery I get only two options : Erase data or exit. Erasing data doesn't change anything: after reboot in recovery I have the same options.
- I flashed the twrp-3.5.0_9-0-h850.img recovery, it says OKAY for sending and writing it. If using a command to boot in recovery fastboot boot xxx.img it fails. And adb reboot recovery puts me in the "No command" with the resting Android robot icon
- I reflashed the same lineage recovery and adb reboot recovery puts me in the "No command" with the resting Android robot icon
- I feel that fastboot flash says OKAY but it keeps the original recovery
Has someone experienced this problem with the LG recovery boot? Does this problem come from a special security in the bootloader preventing changing the recovery?
Finally, I found a solution. The problem was that the stock ROM put in my phone was reverting systematically the recovery to its original one. The error was to reboot the system once I flashed the TWRP or the Lineage OS recovery.
What I did to install Lineage OS was to flash the recovery, disconnect the USB cable and remove the battery. Then boot directly into recovery. I backed up the current OS and installed lineage-17.1-20210110-nightly-h850-signed.zip. After reboot it works perfectly well.
Hi, this is my first post in XDA, so sorry if I'm posting in the wrong section.
I recently got a Redmi Note 11 and today I was going to install KomodoOS in it. I did as follows:
First thing I did was to unlock the bootloader, which seems to have worked fine (I can see the open lock icon alongside the Mi logo when it powers on).
I then flashed TWRP (from here https://www.getdroidtips.com/twrp-recovery-redmi-note-11/). When I first tried the command fastboot flash recovery_a twrp.img, I got an error telling me that recovery_a_a doesn't exist, same for recovery_b (which gave me error that partition recovery_b_a didn't exist). I found on Google I could boot into twrp (fastboot boot twrp.img) and then flash twrp itself (Advanced->Flash recovery), which I did and got no error messages. I booted up the system just normal, rebooted into recovery by issuing adb reboot recovery and it got me back into TWRP. So it seems it was installed successfully.
Lastly, while the phone was on TWRP I copied the rom file into the root directory with adb push komodo-version.zip komodo.zip, clicked on Install, selected komodo.zip then confirmed the installation. It took a few minutes (file is 1.3GB) and it completed with a few errors, but at the top there was the message Install successful.
Then I wiped Dalvik and rebooted the system, but now I'm stuck at a bootloop where it goes to the "No command" screen and reboots. I tried holding volume up+power and volume up while reconnecting the USB but to no avail, can't seem to get out of the loop. Also tried spamming adb devices and fastboot devices on pc but can't connect to the phone.
I'm now a bit desperate, since there's (surprisingly?) not much about this phone out there, and I don't know anything that could be done. Is there still hope?
Links/tutorials I used:
Download and Install AOSP Android 12 on Xiaomi Redmi Note 11
Xiaomi Redmi Note 11 launched in January 2022. The handset came with Android 11. In this tutorial, we will guide you to install Android 12 Custom ROM on
www.getdroidtips.com
Download TWRP Recovery for Xiaomi Redmi Note 11 | Root Using It
On this page, we will guide you to install the TWRP Recovery on Xiaomi Redmi Note 11 (spes). This guide contains both the written instruction and a video
www.getdroidtips.com
[4 Methods] How to Fix TWRP Error: FAILED (remote: No such partition)
In this guide, we will show you four different methods to fix the FAILED (remote: No such partition) error while flashing the TWRP Recovery.
www.droidwin.com
Draining battery and directly going into fastboot as soon as plugging in works or not?
.
dont trust getdroidtip , search rom on xda instead
In Shaomi "No Command" error means system partition has been destroyed. You most likely need to Reflash MIUI using >Mi Flash Tool<.
So your issue is that you cant boot into TWRP? Also, have you tried Power + Vol(-) to get into Fastboot mode. You can also try PC softwares like >Reiboot-For-Android.exe< to boot to recovery or bootloader.
>If you have TWRP no need to use ADB push, just use USB OTG to flash ZIP<