Database Info

[Q] Can't access root and Google apps

I recently rooted my phone (T-Mobile US Nexus S) and installed the 4.0.3 OTA update from this thread, but now I cannot access any Google apps or get root access on any of the apps that require it.

SounderBruce said:
I recently rooted my phone (T-Mobile US Nexus S) and installed the 4.0.3 OTA update from this thread, but now I cannot access any Google apps or get root access on any of the apps that require it.
Click to expand...
Click to collapse
Ok! first download : http://www.4shared.com/zip/XG506hyV/icsroot-fastboot-recovey.html
just unpack, connect your device and click run.bat.....Good luck!

I ran the .bat, but I get an error saying "Device already rooted", but it is still not recognized as rooted by SuperUser.
Alternatively, is it possible to completely wipe the phone of everything (including root) so I can start over with a fresh phone?

Of course you can, and might be the best idea if you don't mind doing it.
Make sure you have the latest CWM recovery on your phone, download the FULL ROM from this thread (i'm not american so i don't know exactly, but from what i know yours is the I9020T, so get that ROM) and copy it to the SDCard. Now go into recovery, wipe system/data and dalvik cache, then flash the ROM.
Do make sure you have the right ROM though. This will get you 100% fresh and untouched 4.0.3. You can probably clear out any non-personal folders on the sdcard too, but that shouldn't do any harm anyway.
After this, use the attached file from this thread to root, and feel free to update root/superuser.

Actually, that's what I did...I can't use CWM recovery because its displaying an error of no root. So how do I wipe this or fix CWM?

Is your boot loader unlocked? And are you trying to flash cwm through fastboot?
Note to backup your sdcard if unlocking the bootloader.

Harbb said:
Is your boot loader unlocked? And are you trying to flash cwm through fastboot?
Note to backup your sdcard if unlocking the bootloader.
Click to expand...
Click to collapse
My bootloader is apparently unlocked and I'm trying to flash through fastboot.

Are you sure the following is satisfied:
-open padlock and google logo on boot
-fastboot (on phone) says "bootloader status: unlocked" or something of the like
-you are using: "fastboot flash recovery "C:\path\to\recovery.img""
-you are using the above command while connected to the PC via USB (with working drivers) and that you are in fastboot mode on the phone (turn off phone --> hold Vol. Up then hold Power TOGETHER for about 2 seconds, should give you reboot and recovery options)
It is necessary to be in the bootloader/fastboot interface on the phone when you run the command. Hopefully it was something simple that i said above, otherwise i'm completely lost.

1. Yes
2. Yes
3. I didn't use that method to root...
4. I'll try that.

3 is just flashing recovery, that is the code u type into cmd/terminal to reflash the recovery img. It isn't rooting the phone. 4 is how to get into the mode on the phone to use the command.
Its a bit confusing at first but makes much more sense once you do it one or two times.

Where do I go to get the recovery image?

The latest ClockWorkMod Recovery can be found on this page. Just scroll down to Nexus S and download 5.0.2.0 crespo .img. Then just direct fastboot to the folder you have it saved in while using the "fastboot flash recovery C:\path\to\recovery.img" command.

Ok. I've tried this, but in command prompt, I get the following error:
C:\Users\Bruce>fastboot flash recovery C:\Users\Bruce\Downloads\recovery.img
'fastboot' is not recognized as an internal or external command,
operable program or batch file.

Check out this rooting guide, however only go up to step 5 (and do NOT type "fastboot oem unlock", do everything up until that point). This will setup fastboot for you, and setup drivers for your computer. Once this is done, do what you did above and it should work successfully.
Remember to cd (change directory) in cmd to where you unzipped that folder.

There isn't a link...

Sorry, stuffed that up. I fixed the link in my previous post pointing to NexusSHacks - How to Root Nexus S.

It's worked, but when I try to go to the recovery menu, the Google/unlocked padlock screen freezes or it displays an Android with its chest compartment open and a red triangular ! symbol.

I just had a really long reply and managed to lose it by closing the page..
That's the stock bootloader you see there, it probably didnt flash or you rebooted your phone. And make sure that you are flashing the latest CWM you downloaded before.

I flashed the latest CWM, but when I try to go to recovery, my phone freezes at the Google logo with the unlocked padlock.

Have you tried flashing it again, or maybe redownloading the file? And of course making sure it is the NEXUS S version which you are downloading.
Alternatively, try just "fastboot boot recovery.img", replacing recovery.img with the full name and path of cwm.
edit: btw, i'll be gone for an hour or two Bruce so i can answer any more questions/issues when i get back

[Q] Clockworkmod Recovery refuses to install on Xoom 3.2.1

So, basically, the details on the Xoom:
Android Version: 3.2.1
Build: HTK75D
Kernel: 2.6.36.3-g111d827 [email protected] #1
Bootloader is unlocked
I am trying to install Tiamat's Clockworkmod image via the ADB method. I do exactly these steps:
adb reboot bootloader
fastboot flash recovery Tiamat-*********-cwm.img
According to the adb console, it says it flashed correctly, and the fastboot also gives the same confirmation.
fastboot reboot
I boot up normally, and run:
adb reboot recovery
It then gives me the dreaded ! mark.
I've spent more than 5 hours trying to get the recovery working, and have tried re downloading the img, changing cables , and the only method that gave me a small glimpse of hope is flashing another img file (cwm 3.0.2.8 flashed) which worked once and then reverted to the ! mark.
Help? If any other info is needed, I will gladly provide.

try this:
1) Flash the recovery via bootloader and the fastboot command
2) After the flash, issue fastboot reboot to reboot the xoom
3) At the M logo during bootup, start hitting the volume down until you see Recovery on the top left corner then hit volume up to select it
That should get you into clockwork mod recovery, after you flash the root package you'll be good to go

Scsa20,
Has this been verified?
Should the offending files, (/system/recovery-from-boot.p OR
/system/etc/install-recovery.sh) be removed per Joe Ferreira's post?
I will try this fix after it has been verified (I've given you a thanks already )

TWRP install problem

I run for a problem to install custom recovery.
Running CO12s with bootloader unlocked. have installed on my windows 7 all necessary sdk tools and packages, on windows command i checked adb version and fastboot all is good.
Now after put device to fastboot mode trying flash TWRP, window command saying that write process ok but still no recovery installed, in developer options I did uncheck recovery update. now if I go to recovery (CO12 recovery) in recovery log I can see that recovery update mode is still "true" how i can turn this off, looks like is blocking access to install custom recovery or is any other solution??

Go to the FAQ:
http://forum.xda-developers.com/oneplus-one/help/faq-oneplus-one-frequently-questions-t2895136
Last question.
Transmitted via Bacon

thank you

Dble check command syntax & Use force recovery boot
djcody said:
I run for a problem to install custom recovery.
Running CO12s with bootloader unlocked. have installed on my windows 7 all necessary sdk tools and packages, on windows command i checked adb version and fastboot all is good.
Now after put device to fastboot mode trying flash TWRP, window command saying that write process ok but still no recovery installed, in developer options I did uncheck recovery update. now if I go to recovery (CO12 recovery) in recovery log I can see that recovery update mode is still "true" how i can turn this off, looks like is blocking access to install custom recovery or is any other solution??
Click to expand...
Click to collapse
Just had similiar issue, my solution provided by timmaaa:
Flash TWRP again & don't do a normal reboot. After flashing is complete disconnect usb while in fastboot mode, use power + volume down to boot directly into recovery.
Also during command process make sure to use code: fastboot flash recovery recovery.img then skip the fastboot reboot & follow timmaaa's instructions above. Worked for me.

Force reboot to recovery fixed problem

How to install TWRP into the LG P500H from Koodo?

I have a Koodo LG P500H. I am having a very hard time installing TWRP.
Firstly Play store doesn't work. It has this old thing called "Market" that has some apps, but not all. Market eventually gets updated to Playstore, but I can't even find TWRP manager. There was another app in the Playstore that I tried called ROM Manager. It said it installed TWRP for me. I restarted the phone, and nothing happened.
Restarting and Holding power/volume down/home will show a picture that seems to be some sort of recovery mode. But it only run for 1-2 seconds before the phone restarts itself. Nothing happens.
I tried to use ADB. But after rebooting the device it just restarted without ever going into recovery mode. So the flash command just get stuck at "Waiting for Device." Does this phone even have a recovery mode?
This phone doesn't support Odin.
I am used to using TWRP. Without it I cannot flash the phone into new OS.
And every single time I fail, the whole phone seems to have reformatted. So I have to enter in my wifi password and gmail again. All of that typing on a very small keyboard takes a lot of time. I had spent hours on this phone without getting TWRP working.
Please help.

going to twrp web site here
downloading the recovery
reboot to fastboot ( bootloader ) than using terminal whit adb driver :
fastboot flash recover '' recovery.img ''

Gw4nM4n said:
going to twrp web site here
downloading the recovery
reboot to fastboot ( bootloader ) than using terminal whit adb driver :
fastboot flash recover '' recovery.img ''
Click to expand...
Click to collapse
The problem is when I reboot into fastboot (adb reboot bootloader), the phone will go into "phone off battery charging mode". It never actually goes into the bootloader.

Ok I did the following and it seems fastboot and TWRP works now. Be sure to enable USB Debugging on your P500.
1) Fastboot tutorial (I did everything here. I hit "ok" on the LGMDP 1.5 tool as needed. Do not wait till the countdown timer goes to zero.)
http://forum.xda-developers.com/showpost.php?p=15122833&postcount=100)?
FastBoot Tutorial
1. Please download this (or from here) file and unzip it in to any folder.
2. Start LGMDP 1.5 tool with the phone connected (you need to have USB drivers installed) and click on Select Port
3. A separate window should appear like the one below
Just click connect
4. Another window will take shape (LGE Mobile security) with lots of options (links)
Click on the first upper right Browse and select the folder in with you have unzipped the files. You will get some errors that some image, table or headers are missing. Just click OK and in the end everything that should remain selected is Partition Table, APPSBL Image Header and APPSBL Image.
Now just close the window (click on x)
5. Now you are back on the main window and here you'll have to click on Download
6. You are almost done and from now on everything should go on automatically.
NV Backup
Autorestart in Emergency\Download mode and upgrade the files (you selected on step 4)
NV Restore (the last step) Do not disconnect the USB cable until the restore is done
Wait for the phone to restart in normal mode (your current rom).
That should be everything you need to do to get fastboot enabled.
Click to expand...
Click to collapse
2) Install PdaNet+ (This was the only thing I did in this tutorial. It fixed the usb driver and the fastboot can then communicate with my PC.)
http://forum.xda-developers.com/showthread.php?t=1350733
http://pdanet.co/a/
(Note: On top of Partition Table, APPSBL Image Header and APPSBL Image in step 4, I also selected the TWRP image file as my RECOVERY image. Not sure if this make a difference. )
(Note 2: I think you can also get the LG drivers here.)
3) Restart, hold down power + home to boot to the fastboot. Or in ADB type adb reboot bootloader.
4) Open ADB (while phone is still in fastboot mode) and type fastboot flash recovery twrp.img (after downloading the TWRP image, renaming it and moving it to my ADB root folder. I am using TWRP 2.8.0.1 here.)
5) Type fastboot reboot
6) After the phone restarts, type adb reboot recovery. TWRP runs for me. Power+Home+Volume Down (3 button combo) also works now. (Previously this would reset the phone.)

Hey Man, im glad it worked. I could use your help.
I bricked my phone and need the restore file, Do you think you could make a backup from TWRP and upload it?
I would be super grateful.
Thank you.
Here is a zip with CM11, twrp 3.0.2.0 and Gapps for CM11.
Its the best rom I found.
https://www.dropbox.com/s/qt7z1cxq92nhpz5/LgP500CM11V4.4.4.zip?dl=0

Hi. What is your "brick" like? Does your TWRP still run? If yes you can just copy a custom OS into your Microsd card and install it from your Microsd.
You can also use ADB push to move files from your PC to the phone.
http://www.androidauthority.com/android-customization-transfer-files-adb-push-adb-pull-601015/
Sent from my MT2L03 using XDA-Developers mobile app
If you TWRP doesn't run, you need to install that first. Do steps 3 and 4 in the above post to boot into bootloader and install TWRP.
3) Restart, hold down power + home to boot to the fastboot. Or in ADB type adb reboot bootloader.
4) Open ADB (while phone is still in fastboot mode) and type fastboot flash recovery twrp.img (after downloading the TWRP image, renaming it and moving it to my ADB root folder. I am using TWRP 2.8.0.1 here.)

The Ultimate guide to flash and root Xperia L (aka, taoshan)

This thread will guide you to flash a custom recovery, Root the device, flash custom ROMs. Firstly, read the entire post and then start your work.
I am a noob. But I have a little experience of rooting and flashing. This device gave me nightmares which are less than as compared to the Xperia Sola which I bricked some years back.
My device has a problem. It does not help install twrp with the traditional ways we know like we can see in the Official TWRP website using "dd" method, the Cyanogenmod link using fastboot commands, the Flashify method, the RecoveryApp method whose apk I never found and the Recovery Installer Utility.
I came to know that either my phone don't have the recovery partition or the phone is overriding all the commands.
Using fastboot commands would give the error like in this post.
Using Flashify would tell me there's no recovery partition found. Rashr would complete the flash process but after booting to recovery, there was no TWRP, just the stock Android recovery.
If you read carefully on the twrp page of XL, there's a line which caught my attention late enough.
It means that TWRP may not work on your device unless you install other custom software as well.
Click to expand...
Click to collapse
Flashing custom kernels with flashtool is easy and they come with recovery pre-installed and lots of amazing stuff, but they won't do any good with the stock ROM. I've tried the Extended stock kernel, the Phantom Kernel and the Thunderzap 4.15.
After surfing the web and forums of other devices, I found that there is a chance I can fix things by updating/repairing software via PC Companion. But something happened and repair also failed.
I can't tell the reason why this happened. And I didn't store the logs. But with trial and error I found some workarounds.
Actual Methods start here
Rooting the device
If you only want to root your device for various reasons, then you will need nothing but a Rootkit. Check out this post about Rooting Xperia L.
But if you are planning to install custom ROMs for your device, then skip this rooting step. It won't be necessary for this condition.
Flashing custom recovery
*Try this method only if above-mentioned method fails*
1. Download TWRP 3.2.1 img. The 3.2.2 and 3.2.3 versions work perfectly but they caused the screen to flicker like hell on my device. Rename the file to 'twrp.img'
2. Download and install adb and fastboot drivers system-wide.
3. Connect your device to PC via USB cable and enabling USB-debugging mode.
4. Open Windows Powershell/Command Prompt in the twrp download directory by pressing Shift and clicking right mouse button.
5. Use fastboot command on stock ROM without root and Unlocked Bootloader. Instead of flashing twrp image to recovery, flash to boot. Use the code:
Code:
adb devices
adb reboot fastboot
Wait for device to boot into fastboot mode. A blue LED will flash when connected.​
Code:
fastboot flash boot twrp.img
fastboot reboot
After reboot, don't boot to system. Boot to recovery by pressing volume up repeatedly when pink LED glows. Stop when device vibrates and LED color changes
Flashing custom ROMs
Once the recovery is installed, everything becomes easy. you can find different custom ROMs on the device page here on XDA.
My favorite one is The resurrection Remix Nougat. It is stable enough to be your daily driver. You can head to that page and follow their instructions. But I will also provide steps here.
When in TWRP after the last step, move the downloaded zip file of the ROM and GApps you want to install to the storage of the device by simply connecting via USB.
After that, in TWRP click on Wipe->Advanced->Tick on System, Cache, Dalvik cache. Then Do swipe to begin wipe.
After wipe, go back to main menu. Tap on install, select from the list the ROM zip. then tap on Add more zips and select the GApps zip and then Swipe to start flashing.
After flashing, reboot to system. The first boot takes time. Don't panic if it won't boot.
Install TWRP to FOTAKernel
After booting to your new ROM, you can install the TWRP to your FOTAKernel.
This can be done as following:
Get the downloaded TWRP img file and push it to the device using command line. Open command prompt in the TWRP directory and type,
Code:
adb root
adb wait-for-device
adb push twrp.img /tmp/twrp.img
Now extract the TWRP image to the FOTA partition code,
Code:
adb shell dd if=/tmp/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
Now reboot to recovery
Code:
adb reboot recovery
Note that custom ROMs often come with Root access inbuilt. If your ROM happened to be not, and your ROM is based on Lollipop or later version of Android, you can root with Magisk. Just read carefully before proceeding.
Comments are welcome!

Hi.
I'm following this thread and I'm stuck on the fifth step "... flash to boot. Use the code:
adb devices​adb reboot fastboot "​
I think my Sony Xperia L C2105 does not have the fastboot mode.
Here's what I did:
Drivers for Xpleria L are installed.
The bootloader is unlocked (I think!)
1 - installed 15-second ADB
2 - open Windows power shell
3 - Command: adb devices
Response is: "List of devices attached: ZH8001ADB3 device"​
4 - Command: adb reboot fastboot
Response is: long pause, phone booted but in normal mode, and light is red ...!​
5 - Command: fastboot flash boot twrp.img;
Response is: "<waiting for device>";
- phone still running in normal mode and the light is red.
- few minutes later, the phone is charging with green light present.​
I think the phone is rooted.
I used the code provided by the Sony website to unlock the bootloader.
Using the Root Checker Basic app, I get the info: "Congratulations! Root access is properly installed on this device!"
But if I type in the dialer *#*#7378423#*#*, and go to Service info > Configuration > Rooting status is "Boootloader unlock allowed" !!
Is that why it does not work?
I tried switching it off and doing Boot into Xperia L Fastboot Mode Using HARDWARE BUTTONS, but the phone is dark, with no picture, and the led turns blue.
Using the command:
PS C: \ adb> adb devices
List of devices attached
PS C: \ adb>
I've been trying to do that for a few days now and I still have not managed it, even using other advice.
Can someone tell me what to do?
Thank you in advance.

Everterra said:
Hi.
I'm following this thread and I'm stuck on the fifth step "... flash to boot. Use the code:
adb devices​adb reboot fastboot "​
I think my Sony Xperia L C2105 does not have the fastboot mode.
.......
Click to expand...
Click to collapse
1. When in fastboot mode, you should type in cmd "fastboot devices" to check the device connectivity. If you can't, then connect using hardware keys.
2. Blue light indicates that you are in fastboot mode. If list of attached devices are blank, that means drivers are not installed (properly). Connect your phone again in fastboot mode and check your drivers page, Win+X > M (I am assuming you must be on windows). There must be a tiny yellow triangle on your device's name. Right click on it and uninstall it and remove device. Try again installing drivers from the flashtool's folder. Disable driver signature enforcement if you are having trouble going the straight way.
3. Your bootloader is still locked because if it had unlocked then the message displayed would have been, "Bootloader Unlocked: Yes" or something like that. Try flashing your stock ROM via Flashtool. Wipe cache and data while flashing. After flashing stock Rom, try unlocking bootloader again. I believe you are using Flashtool.
4. If you are rooted, then you must have any SuperSU app installed on your device. And it's all good even if you are rooted.