Errors flashing tdunham's ROM - Sprint Galaxy S 5 Q&A, Help & Troubleshooting

I posted this within tdunham's ROM thread. I thought I'd better start a thread here since I seem to be getting myself deeper in trouble. I feel like I've been so close, but I also feel like I may have bricked my phone....
I am in twrp trying to flash ROM. (This is my first time using twrp so maybe I"m missing something easy)
I am able to access this file in twrp: 1. G900P_PK1.6.0.1.New_stuff.ver2.3b.zip
I also extracted this file and have a file I can access called: G900P_PK1.6.0.1.New_stuff.ver2.3 (This has folders called META-INF, rootzip (which includes SuperSU zip), system, vrtheme)
Which of these things am I supposed to flash at this point?
When i flash using the NEW_STUFF zip file it says installation complete. Script succeeded: result was [ ]. Updating partition details....done
But above that it says
1. New_stuff.ver2.3b.zip checking for md5 file....skipping md5 check.no md5 file found Is this missing md5 an issue?
My phone will not boot up at all. It says: Kernel is not SEANDROID ENFORCING Set warranty bit: Kernel
I can get into download mode and recovery mode but I cant get phone to boot up.

ok, so firstly the new stuff zip shouldnt be unzipped. Do you have MOAR 7.0 flashed on your phone?
if you can get to download mode, youre fine. all youd need to do is flash the OK4 tar.md5, then twrp 3.0.2, boot into twrp and enable superuser access. a reboot after that will get your phoen working again.
im gonna need some more info before you can get back to the new stuff zip file. What have you installed before getting to this bricked state? I ran MOAR for over a year, so im pretty sure we can get you fixed up. Also, every time i flashed the new stuff, i never felt that it was all that cool. MOAR is bada$$ enough by itself and doesnt really need the new stuff, stuff

SOLVED
THANK YOU Very Much for responding to my plea for help. This gave me some peace and assurance. About the same time you replied, I also got a response in the main tdunham thread. It seems I was trying to only flash the new version and not the original version! So, I"m up and running now. Thank you again for replying! I was getting desperate!
youdoofus said:
ok, so firstly the new stuff zip shouldnt be unzipped. Do you have MOAR 7.0 flashed on your phone?
if you can get to download mode, youre fine. all youd need to do is flash the OK4 tar.md5, then twrp 3.0.2, boot into twrp and enable superuser access. a reboot after that will get your phoen working again.
im gonna need some more info before you can get back to the new stuff zip file. What have you installed before getting to this bricked state? I ran MOAR for over a year, so im pretty sure we can get you fixed up. Also, every time i flashed the new stuff, i never felt that it was all that cool. MOAR is bada$$ enough by itself and doesnt really need the new stuff, stuff
Click to expand...
Click to collapse

abbygayle said:
THANK YOU Very Much for responding to my plea for help. This gave me some peace and assurance. About the same time you replied, I also got a response in the main tdunham thread. It seems I was trying to only flash the new version and not the original version! So, I"m up and running now. Thank you again for replying! I was getting desperate!
Click to expand...
Click to collapse
aint no thang but a chicken wing on a string

Related

[Q] CWM Wont work and other aggravating problems- What can i do?

Hello, boy do I have a mishap. Well, anyway to begin I will say that I decided I wanted to root my phone to debloat it. So what I did, is downloaded the EE4 update and did the VooDoo V4 Kernel that flashes CWM and EXT4 and other junk. Well that all went great. I got it rooted and such but then just tinkering around I went into Rom Manager and told it to back up. WELL, when I did this the phone got locked on the SAMSUNG boot screen for hours and continued to refuse to boot. SO, I attempted to fix it by installing altered beast just to get the os running again and went into clockwork and backed it up. Then I went to the rooted ed1 to bring it back up to EE4 rooted and with the voodoo kernel and such but it refuses to open clockwork! The voodoo kernel changes filesystems and roots it and such but clockwork wont load. When I try to flash it in rom manager it says its succesful and then i go to reboot in recovery. It takes me to the Samsung Recovery 3e, I try to the update.zip, (yes i took the cwm recovery-update.zip and renamed it and through it in the sd card root) but all that happens is that a progress bar shows up for a split second then the android guy with the triangle and ! shows up and it does nothing. Help? I really need to back it up, preferably in the rooted ed1 but in ee4 will work to. Any ideas would be appreciated. I used odin v1.3 by the way. Im willing to try anything to get clockwork to boot so i can back it up. What do I do?
EDIT: Also, now when I go into 3e recovery, it complains saying " cant mount /dev/block/mmcblk0p3 " or something like that.
Did you read anything on this forum beforehand? Or just go link by link downloading files and deciding what to try on your phone?
Just saying..
Yeah, I did. Ive searched everywhere. I cant find anything about my problem. Ive looked at things that are close, hoping a solution can be found but nothing and no I wasnt just downloading files and spoon feeding them to my phone.. I just wanted to be able to debloat it.
Go search about Rom Manager and let us know what you find out...
I dont see how thats going to get me one step closer to solving my problem. Ive done the searching, now im asking.
Start w/ this one. http://forum.xda-developers.com/showthread.php?t=1100384
I can't tell where you are currently on your phone from reading that as it's to much text in one paragraph and it isn't put together in a logical sense and seems to jump around. I would look at the instructions for going to rooted EE4 in the Dev forum as that should get you to where you want to be with voodoo/cwm/rom
Instead of being a Forum Snob. If you know the answer, why don't you just help him out?
There's an abundance of confusing information on here and everyone uses acronyms. I too searched for hours on how to solve a similar problem and ended up having it taken care of for me. People join communities like this one for help. Not to get flamed for asking a question. It may be elementary to YOU but not everyone.
Thanks, for the care. Sorry about that if its jumbled, im frustrated with this because ive flashed the rooted ed1 about a billion times now, trying everything to get it functioning. Id be glad to try to explain again if that could help? Ah, yes. Well, I returned to the forum about installing the voodoo kernel. I followed the process word for word. But it just doesnt seem to want to work. Right now I just flashed it again back to the rooted ed1. Would I be able to put CWM on there at that point?
Jessman123 said:
Thanks, for the care. Sorry about that if its jumbled, im frustrated with this because ive flashed the rooted ed1 about a billion times now, trying everything to get it functioning. Id be glad to try to explain again if that could help? Ah, yes. Well, I returned to the forum about installing the voodoo kernel. I followed the process word for word. But it just doesnt seem to want to work. Right now I just flashed it again back to the rooted ed1. Would I be able to put CWM on there at that point?
Click to expand...
Click to collapse
Yes. But don't use rom manager. Use imnuts cwm recovery.
Sent from my SCH-I510 using Tapatalk
Alright, thanks. Ill try and use imnuts's cwm recovery. But if someone may answer a question, is the samsung bootloader unlocked?? My brother said thats something to know.
Jessman123 said:
Alright, thanks. Ill try and use imnuts's cwm recovery. But if someone may answer a question, is the samsung bootloader unlocked?? My brother said thats something to know.
Click to expand...
Click to collapse
Yes
Sent from my SCH-I510 using Tapatalk
so it is unlocked?? What does the exclamation triangle mean, when i try to do the update.zip from the samsung bootloader?
Oh and sorry if Im not getting this. Are you saying use a application that imnuts made? If so, could you be so nice to link it? Or a method he used? I looked for stuff but I didnt find anything other then what looks like a stock rom/kernel ed1 from him
I know how it is to be frustrated, but like they all said all of your questions have already been answered.
Here's my attempt to help:
Your problem lies in trying to flash CWR through ROM Manager, it currently doesn't play well with our phones. Word is that Koush (the creator) needs to update something for it to work with our phones. The bootloader is unlocked.
To flash imnuts' version of CWR, you'll need to use Samsung's leaked software called Odin - it's PC only. The alternative is Heimdall which is supposed to be cross-platform compatible, but the latest version is command-line only.
You have to find out if you've converted your system to EXT4 or if it's still RFS. That depends on if you have the Voodoo lagfix enabled or not. Check out the dev section and look for the titles that say [RECOVERY], [ODIN], [ROM], and/or something like "Get yourself to EE4 successfully".
A few links:
[HOW-TO] Get a rooted version of EE4
[RECOVERY][6-11-11]Clockwork Mod Recovery
[KERNEL][06-02-11] PeanutButta Jelly Time
Well, currently right now its rfs. Its the stock file system. What I was going to do, or did before, was to put it in download mode and flash the VoodooV4 Kernel. It roots the phone, and all that good stuff and is suppose to put the Voodoo recovery/cwm on there.
EDIT: Heres the proccess I followed before.
http://www.theandroidsoul.com/how-t...and-clockworkmod-recovery-installation-guide/
Jessman123 said:
Well, currently right now its rfs. Its the stock file system. What I was going to do, or did before, was to put it in download mode and flash the VoodooV4 Kernel. It roots the phone, and all that good stuff and is suppose to put the Voodoo recovery/cwm on there.
EDIT: Heres the proccess I followed before.
http://www.theandroidsoul.com/how-t...and-clockworkmod-recovery-installation-guide/
Click to expand...
Click to collapse
The recovery is a separate flash, both in odin. First the kernel, then Recovery.
Just follow here from the beginning, it should work for you:
http://forum.xda-developers.com/showthread.php?t=1122657
Well I have good news. I would like to announce that I have successfully installed CWM. I guess my phone just didnt like the other one or something. But following this link,
http://forum.xda-developers.com/showthread.php?t=1122657
I was able to get it installed. Now my only question is, I want this kernel http://forum.xda-developers.com/showthread.php?t=1092114 for my phone. But its not in a zip. Am I out of luck? Or do I not have to use CWM to install the kernel? Can I use odin and still be okay?
Jessman123 said:
Well I have good news. I would like to announce that I have successfully installed CWM. I guess my phone just didnt like the other one or something. But following this link,
http://forum.xda-developers.com/showthread.php?t=1122657
I was able to get it installed. Now my only question is, I want this kernel http://forum.xda-developers.com/showthread.php?t=1092114 for my phone. But its not in a zip. Am I out of luck? Or do I not have to use CWM to install the kernel? Can I use odin and still be okay?
Click to expand...
Click to collapse
You do need Odin to load that, but i'm wondering why you want to? Did you install the PBJ kernel following the instructions from the other link?
If you want to go down this route, be sure to apply the SD Card fix as well - you'll find posts about it.

[Q] Lg Ls620 (realm) custom recovery

I was trying to find a custom recovery, or any recovery that will work on my lg realm. I boot recovery and it gives me a error message so im guessing its either wiped out or blocked...any ideas out there on how to correct or replace it
twtoned said:
I was trying to find a custom recovery, or any recovery that will work on my lg realm. I boot recovery and it gives me a error message so im guessing its either wiped out or blocked...any ideas out there on how to correct or replace it
Click to expand...
Click to collapse
Looking for one as well. I have not found one.
Recovery is actually preinstalled
I found this just tooling around. Use your favorite file browser, I used
Total commander. /system/vender/itson
The zip file is there. Hope this helps. (Rooted LG ls620)
Could you explain in a little better detail on what you mean Enigmatic177... I'm pulling my hair out Hehe
If anyone makes or finds a working recovery please post it.
Itson is a zip file that was installed after last update it has the basics to unlock the boot loader. I unpacked it used Rom toolbox pro rebooted to RECOVERY did regular reboot system upgraded.
A couple if bit mapp errors 11111. Then I basically flashed CWM.
Before you do this the partitions change from ext2-ext4. I'd advise
Backing them up.
LG Realm & exceed 2 TWRP recovery/fastboot files
No computer needed!!!
Lg realm & exceed 2 twrp custom recovery/fastboot downloade
All you need to do is follow the steps in the read me and you will have the recovery or fast boot to do as you please! Make sure u do a backup!!!!!!
I spent countless hours trying to do this and i finaly got it to work
Now all we need is them roms please make some if you can wold like cm12!
Sorry for not spacing the link im a newb so i cant post links yethttps://mega.co.nz/#!FVQ0GSaI!525LBPtwo696CvZrjY032tKkfS7aaURG-xATm2uzWhw
TWRP recovery help L620 LG Realm
hello I followed the steps in the read me file and i succeeded in installing twrp although im having troubles booting up to my system os. when i power on my device it takes me straight to twrp. i have a feeling i might of missed a step. i tried creating a backup but i cant because i noticed my screen turns off fast. do you think you might know what might be the problem why i cant boot up to my os? thanks!
I think i know what seems to be the problem. I think i might have accidentally replaced the boot img with the twrp recovery img. i did not make a backup before this happened. is there anything i can do to make my phone boot up to its normal image? thanks
Nope. It is officially a paperweight and no one I know of has access to the stock ROM either.
Sent from my LGLS620 using XDA Premium 4 mobile app
Hey
Has anybody found a custom rom?
Finally. Easy as pie
Ok, I downloaded an image (w5c_twrp_bumped.img)
put that img on the root of my sd card
downloaded Rashr from the google play store
opened rashr and tapped 'recovery from storage', navigated to external sd and tapped the image and tapped
ýes please'
flashed it. after the flash the phone rebooted into the twrp recovery.
then just rebooted back into the system
worked perfectly.
im new here im not allowed to post outside links yet, just google "w5c_twrp_bumped.img" should take you to a link for a download of that recovery
i got twrp now as a custom recovery. on my lg realm.
That_One_Person760 said:
hello I followed the steps in the read me file and i succeeded in installing twrp although im having troubles booting up to my system os. when i power on my device it takes me straight to twrp. i have a feeling i might of missed a step. i tried creating a backup but i cant because i noticed my screen turns off fast. do you think you might know what might be the problem why i cant boot up to my os? thanks!
Click to expand...
Click to collapse
You have the bumped recovery so all i can say if u messed up is to flash a stock rom u can find on google i had to re flash mine a few times messing with root
right on, thanks for the info. I had no problems at all. it all fell in place like i was hoping. The Realm is the easiest device Iv ever rooted, flashed, and messed with. Well, as far as rooting and flashing a custom recovery. dunno bout roms though. Im sure its simple?
The_android_Modder said:
No computer needed!!!
Lg realm & exceed 2 twrp custom recovery/fastboot downloade
All you need to do is follow the steps in the read me and you will have the recovery or fast boot to do as you please! Make sure u do a backup!!!!!!
I spent countless hours trying to do this and i finaly got it to work
Now all we need is them roms please make some if you can wold like cm12!
Sorry for not spacing the link im a newb so i cant post links yethttps://mega.co.nz/#!FVQ0GSaI!525LBPtwo696CvZrjY032tKkfS7aaURG-xATm2uzWhw
Click to expand...
Click to collapse
OK, I grabbed and extracted this. I used Flashify to simply flash the recovery (w5c_twrp_bumped.img) and it works like a dream on my LG Realm.
OTOH, trying the same on an Exceed 2 gets me TWRP, but it cannot mount much of anything and the backup fails. After failing, it tells me "No OS found, continue?" I continue and get the message "Appears your device has no Root, install now?' I am absolutely certain I have root, or wouldn't even be able to run Flashify, so I continue and it simply boots into the OS just fine. Perhaps the readme isn't complete, as I see the following file in the extracted folder (resources.zip) with no explanation of why it's there. It "appears" to be a flash-able zip that installs "itson" (whatever THAT is). Note that the Realm has this in the /system/vendor/itson, yet the Exceed 2 doesn't.
Have you actually used this on an Exceed 2? And if so, what am I missing here?
The_android_Modder said:
No computer needed!!!
Lg realm & exceed 2 twrp custom recovery/fastboot downloade
All you need to do is follow the steps in the read me and you will have the recovery or fast boot to do as you please! Make sure u do a backup!!!!!!
I spent countless hours trying to do this and i finaly got it to work
Now all we need is them roms please make some if you can wold like cm12!
Sorry for not spacing the link im a newb so i cant post links yethttps://mega.co.nz/#!FVQ0GSaI!525LBPtwo696CvZrjY032tKkfS7aaURG-xATm2uzWhw
Click to expand...
Click to collapse
Link is DEAD. Any chance you can reupload this file? I can't make heads or tails of some of this thread and I don't want to destroy this phone. Thanks!!!
petermg said:
Link is DEAD. Any chance you can reupload this file? I can't make heads or tails of some of this thread and I don't want to destroy this phone. Thanks!!!
Click to expand...
Click to collapse
I'll do you one better. Just forget about the post you replied to, as it's convoluted as hell. Install TWRP 2.8.6 from here. Ignore the big red warning about the Realm, as he evidently hasn't updated the OP. You can view my notes regarding the Realm in this reply. Tested several times and verified working better than anything else available. Easiest recovery to install I've ever dealt with (all done with an .apk). The option to access via cold boot (battery pull procedure) is something to behold
Be sure to thank the developer, even if you need to create an account to do so. Very VERY nice work!
fathergweedo said:
I'll do you one better. Just forget about the post you replied to, as it's convoluted as hell. Install TWRP 2.8.6 from here. Ignore the big red warning about the Realm, as he evidently hasn't updated the OP. You can view my notes regarding the Realm in this reply. Tested several times and verified working better than anything else available. Easiest recovery to install I've ever dealt with (all done with an .apk). The option to access via cold boot (battery pull procedure) is something to behold
Be sure to thank the developer, even if you need to create an account to do so. Very VERY nice work!
Click to expand...
Click to collapse
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Before you replied I installed the version 2.8.5 from here:
http://androidforums.com/threads/twrp-2-8-5-0-for-realm-ls620-and-exceed-2-vs450pp.908704/
Is 2.8.6 better? Looks like the 2.8.5 can't be booted into via key combo from power off? Are there any other differences? I just used the Rashr flash tool from the market to flash 2.8.5. Worked flawlessly. This is actually my mom's phone and it wanted to do a system upgrade but I wanted to back it up first so that's the reason I wanted a recovery.
Pretty cool though, this recovery installs just via an APK!!!? That's amazing!
I'm tempted to install this on her phone next time she comes over... it should be fine right?
Thanks again!!!!!!!!!!
petermg said:
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Before you replied I installed the version 2.8.5 from here:
http://androidforums.com/threads/twrp-2-8-5-0-for-realm-ls620-and-exceed-2-vs450pp.908704/
Is 2.8.6 better? Looks like the 2.8.5 can't be booted into via key combo from power off? Are there any other differences? I just used the Rashr flash tool from the market to flash 2.8.5. Worked flawlessly. This is actually my mom's phone and it wanted to do a system upgrade but I wanted to back it up first so that's the reason I wanted a recovery.
Pretty cool though, this recovery installs just via an APK!!!? That's amazing!
I'm tempted to install this on her phone next time she comes over... it should be fine right?
Thanks again!!!!!!!!!!
Click to expand...
Click to collapse
That one will cold boot with the battery pull procedure too. A little further down that thread you'll see I modded it to work correctly with the Exceed 2 in addition to the Realm. I like the 2.8.6 better if only that the dates of the backup are correct now. The 286.apk will work fine and overwrite your current recovery. If you leave it installed, you can always open it and reboot to recovery from within the app. If I have more time I'll post a screenshot, but running late for work. I think the screen dimming/timeout issue was fixed as well, but I haven't verified that. I normally disable that in TWRP anyway, as I like to monitor what it's doing during a backup/restore in case of errors.
fathergweedo said:
That one will cold boot with the battery pull procedure too. A little further down that thread you'll see I modded it to work correctly with the Exceed 2 in addition to the Realm. I like the 2.8.6 better if only that the dates of the backup are correct now. The 286.apk will work fine and overwrite your current recovery. If you leave it installed, you can always open it and reboot to recovery from within the app. If I have more time I'll post a screenshot, but running late for work. I think the screen dimming/timeout issue was fixed as well, but I haven't verified that. I normally disable that in TWRP anyway, as I like to monitor what it's doing during a backup/restore in case of errors.
Click to expand...
Click to collapse
THANKS!!!! I'll make it a point to flash that to my mom's phone next time I get the chance!

[Q] Rooted with Recovery Now What???

I have an unlocked xperia z3 d6603 I bought brand new in january I believe. I just today rooted and installed recovery but am stuck on the 23.0A.2.93 tft rom which it shippped with. It would have normally been running unrooted the latest rom from sony which was just pushed out a couple months ago. I'm in california and need a rooted d6603 generic global rom, or even unrooted, and I can't seem to find the down link here. In xpreifirm 3.6a latest, I keep getting a java error so can't use that and I've already uninstalled and installed the latest 64bit java8 update 40. I was going to just flash it with the moonwalker rom but it days I need to be on a different tft altogether. Any help here would be appreciated. I have installed a firewall, changed dns servers, and uninstalled a few things using rom toolbox. Hoping to just update it to the recent tft or even better, a working custom rom which won't mess up the default phone capabilities. I'm on kitkat 4.4.4, at&t lte, rom 23.0.A.2.93
Again I need a rooted global generic 577 tft for a z3, a nonrooted one, or even better, a custom one I can just flash to it so I can get back to my life.
since you have a working recovery just flash this one 23-0-1-5-77-deodexed-zipaligned it's the latest KK
ps: I'm on AT&T in CA as well and running that firmware just fine for a while now, it's generic global so no worries...
awesome. THANKS. Gonna try it now. Been at it all day from like 10am to about 5 when I had to break
How do you flash a zip file
tweker said:
awesome. THANKS. Gonna try it now. Been at it all day from like 10am to about 5 when I had to break
Click to expand...
Click to collapse
I rebooted with TWRP in recovery mode, reset device (Wipe Data, Cache and Dalvik Cache), saw no way of flashing from recovery mode. Shut phone off. Plugged in in flash mode with the zip file in the firmwares folder and it was not recognized by flash tool. Where are the directions for flashing a zip?
Choose the second option in recovery
Install custom zip
I used NDR to reboot into recovery. The zip was on both internal and external at root. First time I selected the one from internal and it gave no errors. Wiped cache and rebooted and still on stock 93. Did the exact same thing again choosing zip on sd card and it still says 93. Third time I did it from sd card but no cache wipe. Still on23.0.A.2.93. WTF???
Where can I find a working ftf. NDR doesn't work for ****. BTW, phone is setup in dev mode with mock, airplane mode etc with supersu free working. I think
BTW, why in the hell does the thread with all the roms not have any current ones???? rooted or not
What for are you trying to flash? Please provide a link.
What does the recovery log say? It really helps if you tell us this.
FTF files are geberally not uploaded anymore as it is very easy to download any you want from the sony servers and create your own FTF using flashtool and Xperia firm.
Ps, it may be nice to watch your language. The issue is not NDR, it works fine.
I'm using D6603_23.0.1.A.5.77_deodex.zip from here: http://forum.xda-developers.com/z3/development/deodex-23-0-1-5-77-deodexed-zipaligned-t3015178 on top of D6603_23.0.A.2.93_Generic_20GLOBAL.ftf which was rooted and dual recovered. I have flashed the above 5.77 zip file like 5 times from recovery mode and still on 93. This last time I noticed I had no file mgr. Installed es, mounted system rw like it says to do after root, reflashed the 77 deodexed zip, wiped dalvik and cache, reupdated supersu zip in recovery, rebooted, and stil on93. What am I doing wrong? Is there not a dern ftf file I can use instead? OR, should and could I just wait for another official update?
tweker said:
I'm using D6603_23.0.1.A.5.77_deodex.zip from here: http://forum.xda-developers.com/z3/development/deodex-23-0-1-5-77-deodexed-zipaligned-t3015178 on top of D6603_23.0.A.2.93_Generic_20GLOBAL.ftf which was rooted and dual recovered. I have flashed the above 5.77 zip file like 5 times from recovery mode and still on 93. This last time I noticed I had no file mgr. Installed es, mounted system rw like it says to do after root, reflashed the 77 deodexed zip, wiped dalvik and cache, reupdated supersu zip in recovery, rebooted, and stil on93. What am I doing wrong? Is there not a dern ftf file I can use instead? OR, should and could I just wait for another official update?
Click to expand...
Click to collapse
That is not a ROM file, it does not contain a ROM. It just deodex's your system files if you are on that firmware.
And, No, there is not a FTF you can flash that is rooted. FTF files have to be completely stock as we cannot sign them with Sony's keys as we do not know them. The only way to flash something rooted is via recovery
Post#2 told me I could flash the zip over and it would work. No wonder it doesn't work because it doesn't do anything. I don't want to unlock boot because I may fail official updates. I really just want to update to a working global generic 77 rooted dual recovered system. So basically even if I had the official 77, unrooted, I still couldn't use (nor root) it right? Thanks for the help. I at least know to go another route.
tweker said:
Post#2 told me I could flash the zip over and it would work. No wonder it doesn't work because it doesn't do anything. I don't want to unlock boot because I may fail official updates. I really just want to update to a working global generic 77 rooted dual recovered system. So basically even if I had the official 77, unrooted, I still couldn't use (nor root) it right? Thanks for the help. I at least know to go another route.
Click to expand...
Click to collapse
Post #2 is wrong. Also the thread stated in the first line that a requirement for that to work is that you are already on .77 firmware.
There is no need to unlock your boot.
Just flash a .77 prerooted ROM.
If you cannot find one then make one yourself. Follow the guide in the thread called PRFCreator (Just google it)
Once you have the files downloaded it takes 7 minutes and it is all automated for you
Thank You Very Much. At present I have access to two pc's. One is my roomies (win8.1) and mine (win7). My roomies has some sort of java issue and xperifirm fails right when you click the file you want. Tried fixing java didn't work. Mine is wireless, dns disabled, mac changed, hosts file, and tiny wall fw. Experifrm says no net access even though it works fine. Tried a cable and for the life of me got the same error (couldn't quite reconfigure it to work correctly-pita). If I ever get the file I will do the prfcreator magic, and I'm assuming, flash it through ndr tools in recovery mode. In the mean, I might request an xda user in another thread to grab one for me and post it. Should help lots of people not just me. Again, thank you for your help, saved a lot of hair pulling.
tweker said:
Thank You Very Much. At present I have access to two pc's. One is my roomies (win8.1) and mine (win7). My roomies has some sort of java issue and xperifirm fails right when you click the file you want. Tried fixing java didn't work. Mine is wireless, dns disabled, mac changed, hosts file, and tiny wall fw. Experifrm says no net access even though it works fine. Tried a cable and for the life of me got the same error (couldn't quite reconfigure it to work correctly-pita). If I ever get the file I will do the prfcreator magic, and I'm assuming, flash it through ndr tools in recovery mode. In the mean, I might request an xda user in another thread to grab one for me and post it. Should help lots of people not just me. Again, thank you for your help, saved a lot of hair pulling.
Click to expand...
Click to collapse
Sorry about the confusion, indeed the first link that I provided was just a patch to deodex your room (I always use deodex so I can mod my rom)....anyway you can use this one it's a generic prerooted .77 from the z3 android development section in this forum, then you can patch it with the other one if you have the need to...just follow the instructions in this link and you should be on your way
Again sorry about that first post, I rooted my phone the minute root was available on locked bootloader so it's been some time now
I have been to that link. The only one I can see that says generic global is the 23.0.A.2.93 one. The others say, Generic_DE, Generic_NCB, or Generic_AU. Which looks to me like Deutch, Generic Nordic?, and Australian? Since I speak english and am nowhere near any of those places, I did not touch them. Which one is safe to use and will there be any post config for my locale and radios?? Plus I have no clue what the purpose is of de-odexing the file system (flashing that zip) does. I still have read write issues with apk's I install when I tell them to use my 128gb sd card. I did recover my setup prior to the zip flash you pointed me to which I still have-thank you.
tweker said:
I have been to that link. The only one I can see that says generic global is the 23.0.A.2.93 one. The others say, Generic_DE, Generic_NCB, or Generic_AU. Which looks to me like Deutch, Generic Nordic?, and Australian? Since I speak english and am nowhere near any of those places, I did not touch them. Which one is safe to use and will there be any post config for my locale and radios?? Plus I have no clue what the purpose is of de-odexing the file system (flashing that zip) does. I still have read write issues with apk's I install when I tell them to use my 128gb sd card. I did recover my setup prior to the zip flash you pointed me to which I still have-thank you.
Click to expand...
Click to collapse
1) its called a FTF file not a TFT file. It's a FlashTool File.
2) your sd write card issues are a feature of KK, and nothing to do with any error or bug to do with your phone. Just Google KK write to sd card to read more about it and how to circumnavigate this issue that was deliberately introduced by Google.
3) i have read some of the advice you have banded about in several of the thread here. Some of it is just plain wrong. Although not dangerous to anyones device it may be worth reading and learning a bit more first.
4) please stick to asking questions in just one thread, there is no need to ask in several thread because the first time you did not get an immediate answer
5) you can safely flash a FTF from any region as long as it is for the same model you have. Especially as you are only going to be on that version for a few minutes whilst you root them immediately upgrade.
Ok, great. I'll grab the de one. As for not trying to help; I put down what worked for me. If I don't know everything I can still give input with the little I know. That's how people learn, myself incl. I just got my pc running not two weeks ago so a little overwhelmed with having just rooted as well. Thanks very much for all your help.
tweker said:
Ok, great. I'll grab the de one. As for not trying to help; I put down what worked for me. If I don't know everything I can still give input with the little I know. That's how people learn, myself incl. I just got my pc running not two weeks ago so a little overwhelmed with having just rooted as well. Thanks very much for all your help.
Click to expand...
Click to collapse
No worries. I did not mean to imply that you should not help, only that you should be sure that what you are saying is in fact correct information.
We do all have to learn, but its hard to learn when incorrect information is posted and stated as "fact"
Greg
From install to booted took 4 min. Just had to update supersu and remove a few things. This is awesome! NDR Utils is worth paying for. Now I can finally encrypt my phone. TYSM

[Q] Stuck booting

Hello, my name is Shagington
I have been slowly unlocking the potential of my tf700t, yet I have come to a point where I am stuck loading the android OS. The problem started when I installed xposed to gain the ability to modify the permission of apps. Now it just sits with the loading circle spinning around and 'round. I tried wiping from the bootloader yet the same thing happens. While looking into the bootloader more, I found twrp installed after what I thought were many failed attempts. I tried a wipe from that as well and the same thing happens. I was thinking about just flashing a stock (rooted) rom with twrp but I am afraid of getting into a worse spot than I already am in, any help is appreciated.
Thanks, Shag
You need to post your bootloader version (read the tiny script when you boot with Power and Volume Down) and your recovery version.
That will determine what you can flash or what type of repair you can try.
Do you have fastboot and adb setup on your PC?
Check if you have a fastboot connection when booted into the bootloader and adb when booted into recovery.
See if you can capture a logcat of the boot process in adb.
Then report back.
Whatever you do, do not use the Wipe Data option from the bootloader!!!!!!!!!
Thank you for the quick reply berndblb, it seems im on build us 10.6.1.14.8-20130514. I just reformatted my pc to windows 10 tech preview so im not quite sure how that will work with adb but I will give it a go tomorrow. Will any custom rom work with the current build i have?
Thanks again, Shagington (Newbington)
shagington said:
Thank you for the quick reply berndblb, it seems im on build us 10.6.1.14.8-20130514. I just reformatted my pc to windows 10 tech preview so im not quite sure how that will work with adb but I will give it a go tomorrow. Will any custom rom work with the current build i have?
Thanks again, Shagington (Newbington)
Click to expand...
Click to collapse
Yes, there are. You are one version behind to the latest (and last) bootloader 10.6.1.14.10. Might be a good idea to update to the latest while you're at it...
Which recovery and version thereof did you flash?
Once we are sure that you have compatible software installed you can flash a bootloader/TWRP package to get you up to date, but let's resolve your current pickle first.
berndblb said:
Yes, there are. You are one version behind to the latest (and last) bootloader 10.6.1.14.10. Might be a good idea to update to the latest while you're at it...
Which recovery and version thereof did you flash?
Once we are sure that you have compatible software installed you can flash a bootloader/TWRP package to get you up to date, but let's resolve your current pickle first.
Click to expand...
Click to collapse
Thanks again for responding good sir, I am on twrp 2.8.5.0, which still loads just fine.
-shagington
When you install xposed it puts an emergency uninstall zip on the internal sdcard partition. Try flashing that from twrp to reverse it out.
Be careful with xposed it can sofbrick easily as you have found out.
shagington said:
I just reformatted my pc to windows 10 tech preview so im not quite sure how that will work with adb
Click to expand...
Click to collapse
I tried the first Win10 preview, and I just had to connect the tablet and run adb.exe - it worked fine with the automatically installed drivers.
Thanks for the replies guys, I couldnt find any zips on my internal, I looked through almost every folder. After looking through the adb tutorials, it is a little to intimidating for me. Kinda sad, I was under the impression that now I have twrp I could just throw some other rom on quickly or even a download a backup from someone else with the same versions to recover and be done with it. I think im just going to leave it soft bricked for a while and use my nexus 7 for now. Appreciate the help guys, it's just a little over my head.
-Shag

PLEASE HELP ME!!! Sm_n915P wont load firmware.

Long story short. I have downloaded about 10 different firmwares and they will not load onto Sm-N915P (Sprint Note4) I attempted to root last year and failed and I just left it alone. I came back to it now and while doing a factory reset via Twrp I wiped OS. I dont remember what firmware I had on the phone as their was no backup done. ( I know, I know now i understand why you must always do a back up). I am trying to at least get any type of firmware reloaded onto the phone. I even have a membership at sammobile now trying firmwares. I would prefer to not just keep downloading firmwares and trying them. If someone has a idea how I can get my phone back up and running.
Im not sure what information to add to this post. I do have Twrp twrp-3.0.2-0-trltespr.img running on phone. but everytime I try to load Firmware I get the MD5 error (I removed the MD5 tag and still get fail.
When I attempt to start phone i get Kernel is not seandroid enforcing (Red)
Set Warranty bit Kernel (Yellow)
Try flashing The latest Twrp from:
https://dl.twrp.me/tblte/
And Custom rom From:
https://forum.xda-developers.com/no...ent/romkernel-galaxy-notedge-1-0beta-t3393124
steavex said:
Try flashing The latest Twrp from:
https://dl.twrp.me/tblte/
And Custom rom From:
https://forum.xda-developers.com/no...ent/romkernel-galaxy-notedge-1-0beta-t3393124
Click to expand...
Click to collapse
Thank you for your reply. I am downloading now and will let you know how it turns out. I really appreciate your reply. I was beginning to think no one would respond and I would have to just trash it and move on.
Thanks for your help
Well Great news! It flashed to the phone no problem. However after it went to a blue screen that said starting Anroid twice. It is now in a boot loop. Can anybody assist me with this.
Sorry I've been kinda busy and forgot to check for replys.....you can try flashing custom kernel from the link below
https://androidfilehost.com/?w=files&flid=109669
Download the first file:

Categories

Resources