I have an unlocked xperia z3 d6603 I bought brand new in january I believe. I just today rooted and installed recovery but am stuck on the 23.0A.2.93 tft rom which it shippped with. It would have normally been running unrooted the latest rom from sony which was just pushed out a couple months ago. I'm in california and need a rooted d6603 generic global rom, or even unrooted, and I can't seem to find the down link here. In xpreifirm 3.6a latest, I keep getting a java error so can't use that and I've already uninstalled and installed the latest 64bit java8 update 40. I was going to just flash it with the moonwalker rom but it days I need to be on a different tft altogether. Any help here would be appreciated. I have installed a firewall, changed dns servers, and uninstalled a few things using rom toolbox. Hoping to just update it to the recent tft or even better, a working custom rom which won't mess up the default phone capabilities. I'm on kitkat 4.4.4, at&t lte, rom 23.0.A.2.93
Again I need a rooted global generic 577 tft for a z3, a nonrooted one, or even better, a custom one I can just flash to it so I can get back to my life.
since you have a working recovery just flash this one 23-0-1-5-77-deodexed-zipaligned it's the latest KK
ps: I'm on AT&T in CA as well and running that firmware just fine for a while now, it's generic global so no worries...
awesome. THANKS. Gonna try it now. Been at it all day from like 10am to about 5 when I had to break
How do you flash a zip file
tweker said:
awesome. THANKS. Gonna try it now. Been at it all day from like 10am to about 5 when I had to break
Click to expand...
Click to collapse
I rebooted with TWRP in recovery mode, reset device (Wipe Data, Cache and Dalvik Cache), saw no way of flashing from recovery mode. Shut phone off. Plugged in in flash mode with the zip file in the firmwares folder and it was not recognized by flash tool. Where are the directions for flashing a zip?
Choose the second option in recovery
Install custom zip
I used NDR to reboot into recovery. The zip was on both internal and external at root. First time I selected the one from internal and it gave no errors. Wiped cache and rebooted and still on stock 93. Did the exact same thing again choosing zip on sd card and it still says 93. Third time I did it from sd card but no cache wipe. Still on23.0.A.2.93. WTF???
Where can I find a working ftf. NDR doesn't work for ****. BTW, phone is setup in dev mode with mock, airplane mode etc with supersu free working. I think
BTW, why in the hell does the thread with all the roms not have any current ones???? rooted or not
What for are you trying to flash? Please provide a link.
What does the recovery log say? It really helps if you tell us this.
FTF files are geberally not uploaded anymore as it is very easy to download any you want from the sony servers and create your own FTF using flashtool and Xperia firm.
Ps, it may be nice to watch your language. The issue is not NDR, it works fine.
I'm using D6603_23.0.1.A.5.77_deodex.zip from here: http://forum.xda-developers.com/z3/development/deodex-23-0-1-5-77-deodexed-zipaligned-t3015178 on top of D6603_23.0.A.2.93_Generic_20GLOBAL.ftf which was rooted and dual recovered. I have flashed the above 5.77 zip file like 5 times from recovery mode and still on 93. This last time I noticed I had no file mgr. Installed es, mounted system rw like it says to do after root, reflashed the 77 deodexed zip, wiped dalvik and cache, reupdated supersu zip in recovery, rebooted, and stil on93. What am I doing wrong? Is there not a dern ftf file I can use instead? OR, should and could I just wait for another official update?
tweker said:
I'm using D6603_23.0.1.A.5.77_deodex.zip from here: http://forum.xda-developers.com/z3/development/deodex-23-0-1-5-77-deodexed-zipaligned-t3015178 on top of D6603_23.0.A.2.93_Generic_20GLOBAL.ftf which was rooted and dual recovered. I have flashed the above 5.77 zip file like 5 times from recovery mode and still on 93. This last time I noticed I had no file mgr. Installed es, mounted system rw like it says to do after root, reflashed the 77 deodexed zip, wiped dalvik and cache, reupdated supersu zip in recovery, rebooted, and stil on93. What am I doing wrong? Is there not a dern ftf file I can use instead? OR, should and could I just wait for another official update?
Click to expand...
Click to collapse
That is not a ROM file, it does not contain a ROM. It just deodex's your system files if you are on that firmware.
And, No, there is not a FTF you can flash that is rooted. FTF files have to be completely stock as we cannot sign them with Sony's keys as we do not know them. The only way to flash something rooted is via recovery
Post#2 told me I could flash the zip over and it would work. No wonder it doesn't work because it doesn't do anything. I don't want to unlock boot because I may fail official updates. I really just want to update to a working global generic 77 rooted dual recovered system. So basically even if I had the official 77, unrooted, I still couldn't use (nor root) it right? Thanks for the help. I at least know to go another route.
tweker said:
Post#2 told me I could flash the zip over and it would work. No wonder it doesn't work because it doesn't do anything. I don't want to unlock boot because I may fail official updates. I really just want to update to a working global generic 77 rooted dual recovered system. So basically even if I had the official 77, unrooted, I still couldn't use (nor root) it right? Thanks for the help. I at least know to go another route.
Click to expand...
Click to collapse
Post #2 is wrong. Also the thread stated in the first line that a requirement for that to work is that you are already on .77 firmware.
There is no need to unlock your boot.
Just flash a .77 prerooted ROM.
If you cannot find one then make one yourself. Follow the guide in the thread called PRFCreator (Just google it)
Once you have the files downloaded it takes 7 minutes and it is all automated for you
Thank You Very Much. At present I have access to two pc's. One is my roomies (win8.1) and mine (win7). My roomies has some sort of java issue and xperifirm fails right when you click the file you want. Tried fixing java didn't work. Mine is wireless, dns disabled, mac changed, hosts file, and tiny wall fw. Experifrm says no net access even though it works fine. Tried a cable and for the life of me got the same error (couldn't quite reconfigure it to work correctly-pita). If I ever get the file I will do the prfcreator magic, and I'm assuming, flash it through ndr tools in recovery mode. In the mean, I might request an xda user in another thread to grab one for me and post it. Should help lots of people not just me. Again, thank you for your help, saved a lot of hair pulling.
tweker said:
Thank You Very Much. At present I have access to two pc's. One is my roomies (win8.1) and mine (win7). My roomies has some sort of java issue and xperifirm fails right when you click the file you want. Tried fixing java didn't work. Mine is wireless, dns disabled, mac changed, hosts file, and tiny wall fw. Experifrm says no net access even though it works fine. Tried a cable and for the life of me got the same error (couldn't quite reconfigure it to work correctly-pita). If I ever get the file I will do the prfcreator magic, and I'm assuming, flash it through ndr tools in recovery mode. In the mean, I might request an xda user in another thread to grab one for me and post it. Should help lots of people not just me. Again, thank you for your help, saved a lot of hair pulling.
Click to expand...
Click to collapse
Sorry about the confusion, indeed the first link that I provided was just a patch to deodex your room (I always use deodex so I can mod my rom)....anyway you can use this one it's a generic prerooted .77 from the z3 android development section in this forum, then you can patch it with the other one if you have the need to...just follow the instructions in this link and you should be on your way
Again sorry about that first post, I rooted my phone the minute root was available on locked bootloader so it's been some time now
I have been to that link. The only one I can see that says generic global is the 23.0.A.2.93 one. The others say, Generic_DE, Generic_NCB, or Generic_AU. Which looks to me like Deutch, Generic Nordic?, and Australian? Since I speak english and am nowhere near any of those places, I did not touch them. Which one is safe to use and will there be any post config for my locale and radios?? Plus I have no clue what the purpose is of de-odexing the file system (flashing that zip) does. I still have read write issues with apk's I install when I tell them to use my 128gb sd card. I did recover my setup prior to the zip flash you pointed me to which I still have-thank you.
tweker said:
I have been to that link. The only one I can see that says generic global is the 23.0.A.2.93 one. The others say, Generic_DE, Generic_NCB, or Generic_AU. Which looks to me like Deutch, Generic Nordic?, and Australian? Since I speak english and am nowhere near any of those places, I did not touch them. Which one is safe to use and will there be any post config for my locale and radios?? Plus I have no clue what the purpose is of de-odexing the file system (flashing that zip) does. I still have read write issues with apk's I install when I tell them to use my 128gb sd card. I did recover my setup prior to the zip flash you pointed me to which I still have-thank you.
Click to expand...
Click to collapse
1) its called a FTF file not a TFT file. It's a FlashTool File.
2) your sd write card issues are a feature of KK, and nothing to do with any error or bug to do with your phone. Just Google KK write to sd card to read more about it and how to circumnavigate this issue that was deliberately introduced by Google.
3) i have read some of the advice you have banded about in several of the thread here. Some of it is just plain wrong. Although not dangerous to anyones device it may be worth reading and learning a bit more first.
4) please stick to asking questions in just one thread, there is no need to ask in several thread because the first time you did not get an immediate answer
5) you can safely flash a FTF from any region as long as it is for the same model you have. Especially as you are only going to be on that version for a few minutes whilst you root them immediately upgrade.
Ok, great. I'll grab the de one. As for not trying to help; I put down what worked for me. If I don't know everything I can still give input with the little I know. That's how people learn, myself incl. I just got my pc running not two weeks ago so a little overwhelmed with having just rooted as well. Thanks very much for all your help.
tweker said:
Ok, great. I'll grab the de one. As for not trying to help; I put down what worked for me. If I don't know everything I can still give input with the little I know. That's how people learn, myself incl. I just got my pc running not two weeks ago so a little overwhelmed with having just rooted as well. Thanks very much for all your help.
Click to expand...
Click to collapse
No worries. I did not mean to imply that you should not help, only that you should be sure that what you are saying is in fact correct information.
We do all have to learn, but its hard to learn when incorrect information is posted and stated as "fact"
Greg
From install to booted took 4 min. Just had to update supersu and remove a few things. This is awesome! NDR Utils is worth paying for. Now I can finally encrypt my phone. TYSM
Related
**NOTE** For the SM-P900! However steps should be the same for SM-P905 EXCLUDING THE FILE TYPES (THEY ARE DIFFERENT DO NOT ATTEMPT TO USE THE FILES FOR THE SM-P900 OR BYE BYE TO YOUR NOTE 12.2 Pro because now you have a problem that may or may not be repairable/reversible). You just have to make sure you have the coordinating files for the process!
If anyone else has issues try this and these steps to complete the Root/Custom ROM/TWRP Recovery installations successfully for a "First time go":
1. Remove Kies and Kies3 files, related files, folders, and everything that has anything to do with the primary installation of either the two programs on your PC and your devices. When/if prompted, select the checkable box and elect not save any type of files... if you want to keep them save them OFF your main PC on a flash or removable storage device.
2. REMOVE ALL SAMSUNG DRIVERS AND REPLACE WITH ONLY OFFICIAL SAMSUNG DRIVES!!! THIS IS A BIG MUST!
3. Using your USB 2.0 cable and ports Install the Custom Rom "P900XXUANB3-RecoveryImg.tar" FIRST and flash it via ODIN 3.07 under the PDA checkbox that is "fixed" (so you noobs don’t make any soft bricks if this is your first attempt at rooting), and only use the ODIN 3.07 THAT COMES W/ CHAINFIRES AUTO ROOT .zip file and then unzip the folder to open ODIN 3.07 ONLY! This is only because I have read that there have been issues installing the SU via Chain Fires Auto Root Process... the file is called (currently as of 25 JUNE 2014) "P900XXUANB3-RecoveryImg.tar" PDA select it and then start when in DOWNLOAD MODE on your device. Manually select DOWNLOAD MODE if you have to BEFORE PRESSING START! Otherwise, one is just going to sit there and not accomplish anything.
http://forum.xda-developers.com/attachment.php?attachmentid=2591013&d=1392923580
http://forum.xda-developers.com/attachment.php?attachmentid=2591159&d=1392930654
http://forum.xda-developers.com/attachment.php?attachmentid=2775098&d=1401644348
4 Reboot back into DOWNLOAD MODE. Flash in ODIN 3.07 with the PDA section and select this file next to install: "openrecovery-twrp-2.7.1.0-v1awifi.img.tar"
5. In DOWNLOAD MODE and flash the file under the PDA box TWRP (OR CURRENT RECOVERY OF YOUR CHOICE THAT IS AVAILABLE)
6. AGAIN... Restart your device into DOWNLOAD MODE via ODIN 3.07 and select PDA and then finally root this: "CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5" Then you can backup, restore, flash anything, and be happy! YOU SHOULD FINALLY HAVE A SUCCESSFUL ROOT! Turn off and REBOOT into RECOVERY to see if TWRP stuck and then reboot to see if the SU stuck. IF everything stuck reboot back into TWRP to flash whatever rom is available MAKE SURE TO BACK UP EVERY FILE BEFORE YOU FLASH ANY NON-STOCK ROMS. If not successful rinse wash and repeat until it does!
http://download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
7. That’s it you should have root and a custom rom and recovery if you followed these instructions for flashing via ODIN 3.07 and Chainfires AutoRoot files. If you still have an issue repeat until root/recovery/Rom sticks. If you have to update the Binary for the SU just go to the Google Play Store and install the app and then try it again till it works. GOOD LUCK it worked for me this way!
**IMPORTANT**
BACK UP BACK UP BACK UP BACK UP after every flash that is possible to back up. If you can, back up the NON-SU stock ROM BEFORE installing SU, after installing the recovery and/or back up.
***IF I HELPED YOU OUT THANK ME***
DISCLAIMER - all research was observed via comments on the thread according to issues people have been having during ROOTING the device I simply have compiled the data and made a check list!
Need a link to the files you mentioned.
Thanks. Very helpful.
I have a P900. Is there a way to unroot and bring a unit back to stock? My main concern is if Samsung sends out a software/firmware update, and a device is already rooted, can the update be applied?
sstea said:
Thanks. Very helpful.
I have a P900. Is there a way to unroot and bring a unit back to stock? My main concern is if Samsung sends out a software/firmware update, and a device is already rooted, can the update be applied?
Click to expand...
Click to collapse
Read THIS
But still one quiestion, why the heck you root your device if you are going to update it via Samsung's official ways. Ah and one more question.. why the heck would you want to update your device if it's rooted?
A new update from Samsung can patch all known security holes and make your device unrootable, and since you are rooted now, one would think that you don't want to loose it. Or where do I know if you rooted because it sounded nice and cool, without knowing what you did and most importantly WHY you did.
Spere said:
Read THIS
But still one quiestion, why the heck you root your device if you are going to update it via Samsung's official ways. Ah and one more question.. why the heck would you want to update your device if it's rooted?
A new update from Samsung can patch all known security holes and make your device unrootable, and since you are rooted now, one would think that you don't want to loose it. Or where do I know if you rooted because it sounded nice and cool, without knowing what you did and most importantly WHY you did.
Click to expand...
Click to collapse
Thanks. I appreciate the reply. I have rooted many devices before. I have to admit that it was more of following posted instructions and not fully understanding the details. What gives me pause is how extremely limited the support is for this tablet. I want to root my note if I can make it more responsive, get rid of bloatware, enable more apps for multi-window, titanium backup, etc. I want to make sure that if I root that I don't get stuck with on an old release. So will previously rooted Notes be able to get the necessary files to easily update and maintain root, or does rooting now mean that a tablet may be stuck at the current release? Thanks
sstea said:
Thanks. I appreciate the reply. I have rooted many devices before. I have to admit that it was more of following posted instructions and not fully understanding the details. What gives me pause is how extremely limited the support is for this tablet. I want to root my note if I can make it more responsive, get rid of bloatware, enable more apps for multi-window, titanium backup, etc. I want to make sure that if I root that I don't get stuck with on an old release. So will previously rooted Notes be able to get the necessary files to easily update and maintain root, or does rooting now mean that a tablet may be stuck at the current release? Thanks
Click to expand...
Click to collapse
You can always flash stock firmware via odin
I was just wondering if everyone was having a much easier time with achieving root now? Kies caused me to "Hang" a lot during the Root and custom rom to stick w root... as of right now i can not get the only ONE custom ROM that looks promising, i have found by GWatts (correct me if i am wrong and i apologize if i have typed the wrong screen name handle) i believe his handle is... at this point im not sure what i am doing wrong as of yet but im sure i am missing a step or i just need to start back at unroot back to stock firmware and try and try again lol. not saying anything is wrong with his work at all by any means because people other than me with the same device have gotten it to stick and im just wishing i could as well because its sweet looking ROM! NOT TO MENTION THE ONLY ONE THAT IS OUT (that is which i know about. i haven't been on in a few months idk), SO KUDOS TO WATTS i just haven't been successful at installing his custom rom just yet... Im hoping that its just going to need to be erased again and then reformatted after a factory reset and what not, i pray it sticks because his incorporation of the aroma installer was a nice touch and his ROM really looks good... Now if i can just get it not to stick at samsung boot logo and freeze id be good lol!
sanvara said:
Need a link to the files you mentioned.
Click to expand...
Click to collapse
ok
I followed your instructions but while flashing the cf-auto-root file my screen got all distorted (speckled grains of color), and nothing else happened for about 15 minutes, until I just unplugged it and shut it off.
Now when I power it on it gives me the error "Firmware upgrade uncountered an issue. Please select recovery mode in Kies & try again."
I wonder what I did wrong.
pnuker said:
I followed your instructions but while flashing the cf-auto-root file my screen got all distorted (speckled grains of color), and nothing else happened for about 15 minutes, until I just unplugged it and shut it off.
Now when I power it on it gives me the error "Firmware upgrade uncountered an issue. Please select recovery mode in Kies & try again."
I wonder what I did wrong.
Click to expand...
Click to collapse
**Edit**
I went back and reflashed the twrp file and it got me out of the error screen. I installed supersu, and then re-flashed the cf-auto-root file, and it worked like a charm. I'm not sure if it was the installation of supersu, or just repeating the process that fixed it, but I'm happy either way...
Thank you! I succesfully rooted my SM-P900 after all mentioned problems ( hanging in the cache.img and after a while a disturbed screen etc.) with your guide. I am a very happy rooter now.
Thanks,
Thanks to the poster. I tried rooting with the instructions from a few other sites and thought I bricked it,
Followed your instructions, and presto.. Rooted! :good:
Rooted!
Thanks for your post. This is my first time ever rooting a device. Your method worked perfectly!
your welcome!
frankiecxyz said:
Thanks for your post. This is my first time ever rooting a device. Your method worked perfectly!
Click to expand...
Click to collapse
your very welcome! it took me a bit to get it down but i eventually figured it out and at the time information on rooting the device was hard to find with this specific model. then i discovered what the issues where and felt the need to post it! im glad i could help!:laugh:
Flash SU with TWRP not ODIN
Here's my story...
Received my new UK spec SM-P900 Note Pro 12.2, ran through the initial setup, performed two OTA upgrades to KOT49H.P900XXUANI1, then attempted to flash SU using Odin 3.07 using the various instructions on this forum. Result: failed cache flash and soft brick!
Used Keis 3 to recover the tablet which took two hours! After more reading I discovered the quick boot recovery flash method, so re-attempted on a different PC, with exactly the same result. Re-flashed the boot, tried again, fail, again, fail, etc, etc. Various permutations of PCs, Odin versions and USB ports were tried.
Concluded that the Odin method was NEVER going to work, so had a rethink. Used Odin to flash TWRP v2.8. Downloaded the latest SU-BETA v2.7 flash for TWRP (not Odin), copied it to the root of the tablet SD and then flashed it with TWRP. Worked first time with no messing about!!!
Booted, ran SU and upgraded to Premium, disabled KNOX from within SU. Tablet locked up. Booted, re-ran SU, disabled KNOX again, this time successfully. Ran Titanium, filtered with KNOX and froze all occurrences, then de-installed KNOX completely. :good:
Lesson learnt... DO NOT use Odin to flash SU on a P900 !
soft bricked
Hello!
First of all let me say that I'm a complete newbie, this is my first android device. I tried to root my SM-P900 (P900XXUANI1) using an online guide (image with URL attached, as I am not allowed to paste URLs)
Unfortunately at Step 10 (flashing with Odin) the operation failed and now I ended up with a soft bricked device (I assume this is the correct definition). It will only show the message asking me to connect it to KIES to recover it.
I know i can try to use KIES 3 and restore it, but before that i would like to ask if there is any alternative which will allow me to unbrick the device without losing all my data... (yeah i know...).
If i follow this guide will this help? I'm not sure if I can even put the device in download mode again as it shows the error message about connecting it to KIES...
At this point I don't care about rooting, I just want to unbrick the device.... I understand the guide up to (and including) step 3. But for the rest of the steps I'm lost Could anyone please explain them in a bit more detail? I don't want to install any custom firmware, just to unbrick it...
Any help would be very appreciated!
Thank you
Yemble said:
Here's my story...
Received my new UK spec SM-P900 Note Pro 12.2, ran through the initial setup, performed two OTA upgrades to KOT49H.P900XXUANI1, then attempted to flash SU using Odin 3.07 using the various instructions on this forum. Result: failed cache flash and soft brick!
Used Keis 3 to recover the tablet which took two hours! After more reading I discovered the quick boot recovery flash method, so re-attempted on a different PC, with exactly the same result. Re-flashed the boot, tried again, fail, again, fail, etc, etc. Various permutations of PCs, Odin versions and USB ports were tried.
Concluded that the Odin method was NEVER going to work, so had a rethink. Used Odin to flash TWRP v2.8. Downloaded the latest SU-BETA v2.7 flash for TWRP (not Odin), copied it to the root of the tablet SD and then flashed it with TWRP. Worked first time with no messing about!!!
Booted, ran SU and upgraded to Premium, disabled KNOX from within SU. Tablet locked up. Booted, re-ran SU, disabled KNOX again, this time successfully. Ran Titanium, filtered with KNOX and froze all occurrences, then de-installed KNOX completely. :good:
Lesson learnt... DO NOT use Odin to flash SU on a P900 !
Click to expand...
Click to collapse
Have you got a link to the odin rwrp 2.7 you used and the su 2.7 flash for twrp please?
VenomousViper said:
**NOTE** For the SM-P900! However steps should be the same for SM-P905 EXCLUDING THE FILE TYPES (THEY ARE DIFFERENT DO NOT ATTEMPT TO USE THE FILES FOR THE SM-P900 OR BYE BYE TO YOUR NOTE 12.2 Pro because now you have a problem that may or may not be repairable/reversible). You just have to make sure you have the coordinating files for the process!
If anyone else has issues try this and these steps to complete the Root/Custom ROM/TWRP Recovery installations successfully for a "First time go":
1. Remove Kies and Kies3 files, related files, folders, and everything that has anything to do with the primary installation of either the two programs on your PC and your devices. When/if prompted, select the checkable box and elect not save any type of files... if you want to keep them save them OFF your main PC on a flash or removable storage device.
2. REMOVE ALL SAMSUNG DRIVERS AND REPLACE WITH ONLY OFFICIAL SAMSUNG DRIVES!!! THIS IS A BIG MUST!.......
Click to expand...
Click to collapse
When i trying root, my SGN freeze in "cache". Odin show error and tablet goes to Emergency Firmware Recovery. Аnd it does not matter what program I use and how I do it.
Mine Reboots Constantly
I rooted my SM-900 about two weeks ago.
It worked great for a week until the device started rebooting by itself.
The first time a couple times a day, now it does it whenever as often as twice in 5 minutes.
Is there a way to see which app is causing this or does anyone know why this might be happening?
Though I rooted I haven't been poking around. I figured it'd be like using Linux but now I see it's not quite like that.
Thanks in advance.
sunnykhs said:
I rooted my SM-900 about two weeks ago.
It worked great for a week until the device started rebooting by itself.
The first time a couple times a day, now it does it whenever as often as twice in 5 minutes.
Is there a way to see which app is causing this or does anyone know why this might be happening?
Though I rooted I haven't been poking around. I figured it'd be like using Linux but now I see it's not quite like that.
Thanks in advance.
Click to expand...
Click to collapse
Have you cleared dalvic cache and cache in TWRP recovery? Be forewarned the process takes a while for cache wipe.
Sent from my SM-P900 using Tapatalk
I was trying to find a custom recovery, or any recovery that will work on my lg realm. I boot recovery and it gives me a error message so im guessing its either wiped out or blocked...any ideas out there on how to correct or replace it
twtoned said:
I was trying to find a custom recovery, or any recovery that will work on my lg realm. I boot recovery and it gives me a error message so im guessing its either wiped out or blocked...any ideas out there on how to correct or replace it
Click to expand...
Click to collapse
Looking for one as well. I have not found one.
Recovery is actually preinstalled
I found this just tooling around. Use your favorite file browser, I used
Total commander. /system/vender/itson
The zip file is there. Hope this helps. (Rooted LG ls620)
Could you explain in a little better detail on what you mean Enigmatic177... I'm pulling my hair out Hehe
If anyone makes or finds a working recovery please post it.
Itson is a zip file that was installed after last update it has the basics to unlock the boot loader. I unpacked it used Rom toolbox pro rebooted to RECOVERY did regular reboot system upgraded.
A couple if bit mapp errors 11111. Then I basically flashed CWM.
Before you do this the partitions change from ext2-ext4. I'd advise
Backing them up.
LG Realm & exceed 2 TWRP recovery/fastboot files
No computer needed!!!
Lg realm & exceed 2 twrp custom recovery/fastboot downloade
All you need to do is follow the steps in the read me and you will have the recovery or fast boot to do as you please! Make sure u do a backup!!!!!!
I spent countless hours trying to do this and i finaly got it to work
Now all we need is them roms please make some if you can wold like cm12!
Sorry for not spacing the link im a newb so i cant post links yethttps://mega.co.nz/#!FVQ0GSaI!525LBPtwo696CvZrjY032tKkfS7aaURG-xATm2uzWhw
TWRP recovery help L620 LG Realm
hello I followed the steps in the read me file and i succeeded in installing twrp although im having troubles booting up to my system os. when i power on my device it takes me straight to twrp. i have a feeling i might of missed a step. i tried creating a backup but i cant because i noticed my screen turns off fast. do you think you might know what might be the problem why i cant boot up to my os? thanks!
I think i know what seems to be the problem. I think i might have accidentally replaced the boot img with the twrp recovery img. i did not make a backup before this happened. is there anything i can do to make my phone boot up to its normal image? thanks
Nope. It is officially a paperweight and no one I know of has access to the stock ROM either.
Sent from my LGLS620 using XDA Premium 4 mobile app
Hey
Has anybody found a custom rom?
Finally. Easy as pie
Ok, I downloaded an image (w5c_twrp_bumped.img)
put that img on the root of my sd card
downloaded Rashr from the google play store
opened rashr and tapped 'recovery from storage', navigated to external sd and tapped the image and tapped
ýes please'
flashed it. after the flash the phone rebooted into the twrp recovery.
then just rebooted back into the system
worked perfectly.
im new here im not allowed to post outside links yet, just google "w5c_twrp_bumped.img" should take you to a link for a download of that recovery
i got twrp now as a custom recovery. on my lg realm.
That_One_Person760 said:
hello I followed the steps in the read me file and i succeeded in installing twrp although im having troubles booting up to my system os. when i power on my device it takes me straight to twrp. i have a feeling i might of missed a step. i tried creating a backup but i cant because i noticed my screen turns off fast. do you think you might know what might be the problem why i cant boot up to my os? thanks!
Click to expand...
Click to collapse
You have the bumped recovery so all i can say if u messed up is to flash a stock rom u can find on google i had to re flash mine a few times messing with root
right on, thanks for the info. I had no problems at all. it all fell in place like i was hoping. The Realm is the easiest device Iv ever rooted, flashed, and messed with. Well, as far as rooting and flashing a custom recovery. dunno bout roms though. Im sure its simple?
The_android_Modder said:
No computer needed!!!
Lg realm & exceed 2 twrp custom recovery/fastboot downloade
All you need to do is follow the steps in the read me and you will have the recovery or fast boot to do as you please! Make sure u do a backup!!!!!!
I spent countless hours trying to do this and i finaly got it to work
Now all we need is them roms please make some if you can wold like cm12!
Sorry for not spacing the link im a newb so i cant post links yethttps://mega.co.nz/#!FVQ0GSaI!525LBPtwo696CvZrjY032tKkfS7aaURG-xATm2uzWhw
Click to expand...
Click to collapse
OK, I grabbed and extracted this. I used Flashify to simply flash the recovery (w5c_twrp_bumped.img) and it works like a dream on my LG Realm.
OTOH, trying the same on an Exceed 2 gets me TWRP, but it cannot mount much of anything and the backup fails. After failing, it tells me "No OS found, continue?" I continue and get the message "Appears your device has no Root, install now?' I am absolutely certain I have root, or wouldn't even be able to run Flashify, so I continue and it simply boots into the OS just fine. Perhaps the readme isn't complete, as I see the following file in the extracted folder (resources.zip) with no explanation of why it's there. It "appears" to be a flash-able zip that installs "itson" (whatever THAT is). Note that the Realm has this in the /system/vendor/itson, yet the Exceed 2 doesn't.
Have you actually used this on an Exceed 2? And if so, what am I missing here?
The_android_Modder said:
No computer needed!!!
Lg realm & exceed 2 twrp custom recovery/fastboot downloade
All you need to do is follow the steps in the read me and you will have the recovery or fast boot to do as you please! Make sure u do a backup!!!!!!
I spent countless hours trying to do this and i finaly got it to work
Now all we need is them roms please make some if you can wold like cm12!
Sorry for not spacing the link im a newb so i cant post links yethttps://mega.co.nz/#!FVQ0GSaI!525LBPtwo696CvZrjY032tKkfS7aaURG-xATm2uzWhw
Click to expand...
Click to collapse
Link is DEAD. Any chance you can reupload this file? I can't make heads or tails of some of this thread and I don't want to destroy this phone. Thanks!!!
petermg said:
Link is DEAD. Any chance you can reupload this file? I can't make heads or tails of some of this thread and I don't want to destroy this phone. Thanks!!!
Click to expand...
Click to collapse
I'll do you one better. Just forget about the post you replied to, as it's convoluted as hell. Install TWRP 2.8.6 from here. Ignore the big red warning about the Realm, as he evidently hasn't updated the OP. You can view my notes regarding the Realm in this reply. Tested several times and verified working better than anything else available. Easiest recovery to install I've ever dealt with (all done with an .apk). The option to access via cold boot (battery pull procedure) is something to behold
Be sure to thank the developer, even if you need to create an account to do so. Very VERY nice work!
fathergweedo said:
I'll do you one better. Just forget about the post you replied to, as it's convoluted as hell. Install TWRP 2.8.6 from here. Ignore the big red warning about the Realm, as he evidently hasn't updated the OP. You can view my notes regarding the Realm in this reply. Tested several times and verified working better than anything else available. Easiest recovery to install I've ever dealt with (all done with an .apk). The option to access via cold boot (battery pull procedure) is something to behold
Be sure to thank the developer, even if you need to create an account to do so. Very VERY nice work!
Click to expand...
Click to collapse
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Before you replied I installed the version 2.8.5 from here:
http://androidforums.com/threads/twrp-2-8-5-0-for-realm-ls620-and-exceed-2-vs450pp.908704/
Is 2.8.6 better? Looks like the 2.8.5 can't be booted into via key combo from power off? Are there any other differences? I just used the Rashr flash tool from the market to flash 2.8.5. Worked flawlessly. This is actually my mom's phone and it wanted to do a system upgrade but I wanted to back it up first so that's the reason I wanted a recovery.
Pretty cool though, this recovery installs just via an APK!!!? That's amazing!
I'm tempted to install this on her phone next time she comes over... it should be fine right?
Thanks again!!!!!!!!!!
petermg said:
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Before you replied I installed the version 2.8.5 from here:
http://androidforums.com/threads/twrp-2-8-5-0-for-realm-ls620-and-exceed-2-vs450pp.908704/
Is 2.8.6 better? Looks like the 2.8.5 can't be booted into via key combo from power off? Are there any other differences? I just used the Rashr flash tool from the market to flash 2.8.5. Worked flawlessly. This is actually my mom's phone and it wanted to do a system upgrade but I wanted to back it up first so that's the reason I wanted a recovery.
Pretty cool though, this recovery installs just via an APK!!!? That's amazing!
I'm tempted to install this on her phone next time she comes over... it should be fine right?
Thanks again!!!!!!!!!!
Click to expand...
Click to collapse
That one will cold boot with the battery pull procedure too. A little further down that thread you'll see I modded it to work correctly with the Exceed 2 in addition to the Realm. I like the 2.8.6 better if only that the dates of the backup are correct now. The 286.apk will work fine and overwrite your current recovery. If you leave it installed, you can always open it and reboot to recovery from within the app. If I have more time I'll post a screenshot, but running late for work. I think the screen dimming/timeout issue was fixed as well, but I haven't verified that. I normally disable that in TWRP anyway, as I like to monitor what it's doing during a backup/restore in case of errors.
fathergweedo said:
That one will cold boot with the battery pull procedure too. A little further down that thread you'll see I modded it to work correctly with the Exceed 2 in addition to the Realm. I like the 2.8.6 better if only that the dates of the backup are correct now. The 286.apk will work fine and overwrite your current recovery. If you leave it installed, you can always open it and reboot to recovery from within the app. If I have more time I'll post a screenshot, but running late for work. I think the screen dimming/timeout issue was fixed as well, but I haven't verified that. I normally disable that in TWRP anyway, as I like to monitor what it's doing during a backup/restore in case of errors.
Click to expand...
Click to collapse
THANKS!!!! I'll make it a point to flash that to my mom's phone next time I get the chance!
I've been using Gnabo v_7 version for quite a long time, and a very simple and beautiful day when I woke up my Samsung GT-N8000 was stuck on bootscreen. I wasn't able to do much so I got this "Brazil stock rom" that I found in a website, and it flashed all right, except for the detail that there is something at the screen that I haven't got a bloody clue how to remove. hahaha
And still, whenever I try to install another room, I got stuck at bootlogo and so on. I'm kinda lost here, mind a little help?
I traveled around the forum but well, I'm a little dumb so I couldn't find any proper information about, how to solve this. I would like to know if there is a way to remove this thing from the main screen, and post here the image for you guys to see it please.
I tried to post the image here to make it easier understanding, but since I got this login recently I can't =\
Thanks
Install custom recovery (if you haven't already. If you already have it installed, make sure to update to latest version), root device, wipe everything and flash custom ROM.
DroidTwe4kz said:
Install custom recovery (if you haven't already. If you already have it installed, make sure to update to latest version), root device, wipe everything and flash custom ROM.
Click to expand...
Click to collapse
So far I've tried the rom = N8000XXUDNE4 [still bootloop], then another 4.1 android version of other German rom XXALGA and nothing. Downloaded 3 Brazilian versions, and nothing. [I am from Brazil]. The only one that worked flashing using Odin was one called "KIES_HOME_N8000UBALGA_N8000ZTOALG3_N8000UBLG5.tar". And still, not recognizing my cellphone chip, and with some big watermark at the middle of the screen showing some information about the ROM and the version is 4.0. Even though this one worked fine, I was able to root and when I tried to flash another room, BANG! Bootloop again! =\
I was looking at the forum topics and I read some about ADB or something like that can fix this and "break" this bootloop making the device work normally again with the roms. But i haven't got a clue how to use it. Please help me! =\
vitortakeda said:
So far I've tried the rom = N8000XXUDNE4 [still bootloop], then another 4.1 android version of other German rom XXALGA and nothing. Downloaded 3 Brazilian versions, and nothing. [I am from Brazil]. The only one that worked flashing using Odin was one called "KIES_HOME_N8000UBALGA_N8000ZTOALG3_N8000UBLG5.tar". And still, not recognizing my cellphone chip, and with some big watermark at the middle of the screen showing some information about the ROM and the version is 4.0. Even though this one worked fine, I was able to root and when I tried to flash another room, BANG! Bootloop again! =\
I was looking at the forum topics and I read some about ADB or something like that can fix this and "break" this bootloop making the device work normally again with the roms. But i haven't got a clue how to use it. Please help me! =\
Click to expand...
Click to collapse
You can use ADB to push/pull files to Android. I don't know if you can use it to fix bootloop. With it, you can also reboot to recovery and sideload zip
DroidTwe4kz said:
You can use ADB to push/pull files to Android. I don't know if you can use it to fix bootloop. With it, you can also reboot to recovery and sideload zip
Click to expand...
Click to collapse
Well, after 2 days of research and paying attention on things here, I found out that my problem is "/EFS error". Meaning to use ADB to recover or fix it? But I don't know how to use this. I've downloaded 3GB of it but I was lost about using, and uninstalled. Is is there any short or better version and some good tutorial about using to retrieve my EFS so I can install another roms? I'm using original stock rom now, Brazilian android 4.0 and that's the only only the device is working fine but of course missing things as my cellphone card and the yellow message at the top of the screen. Please guide me through ADB.
P.s Is there a way to create /efs or something like so the device work properly? Cause I've deleted when I installed some rom, and I have no backup here. =\
Thanks!
vitortakeda said:
Well, after 2 days of research and paying attention on things here, I found out that my problem is "/EFS error". Meaning to use ADB to recover or fix it? But I don't know how to use this. I've downloaded 3GB of it but I was lost about using, and uninstalled. Is is there any short or better version and some good tutorial about using to retrieve my EFS so I can install another roms? I'm using original stock rom now, Brazilian android 4.0 and that's the only only the device is working fine but of course missing things as my cellphone card and the yellow message at the top of the screen. Please guide me through ADB.
P.s Is there a way to create /efs or something like so the device work properly? Cause I've deleted when I installed some rom, and I have no backup here. =\
Thanks!
Click to expand...
Click to collapse
Here is tutorial about how to install ADB and Fastboot drivers and use them. Unfortunately, I don't know how to use it to restore efs. Sorry.
Hey guys!
To start, I want to say what an amazing place XDA is and how much information and knowledge you can get from here and how awesome the moderators are. I don't think I could ever find another amazing and/or helpful community such as those found here! Thanks to all who have helped me out with my Android issues!
Now to my issue and I apologize ahead of time if there is another thread (or related thread) found in the forum.
As the title states, I have a 2013 Motorola Moto G XT1031 Boost Mobile device. I had upgraded it to Lollipop 5.0.2 or 5.1 when it came out (I can't remember which one it was) and I had then decided to root it. I can say that I believe I was successful in rooting the device because I was able to install Supersu and use RootChecker to verify the install. Everything was going okay until i decided to research and eventually install a custom recovery and attempt to install a custom ROM. Well, let's just say that the recovery install was a bust...
In doing my research for a custom recovery, I found that TWRP had a custom recovery for my phone and apparently for my firmware via TWRP's app on the Play Store. So, I searched for my device in their in-app search for a custom recovery, downloaded it and installed it from the app. Now, my gut told me that this probably wouldn't work and that I should probably be installing a custom recovery via CLI. Nope. I didn't do this. Instead, like I said, I installed a custom recovery from the app itself. That screwed things up for me. I have no idea if it was the install, but my phone began to act incredibly strange. When in the TWRP recovery, my screen had this line that would continuously scroll from top to bottom. It wasn't a completely solid line, but it was transparent, almost like an empty thermometer glass stick was going down the screen. It was weird and not normal. I figured the phone's software was partially broken. It only did this in the TWRP recovery. Nowhere else did this happen. It was slightly annoying.
Later on I decided to install a custom ROM. Again, I did the necessary research to find out if there were any ROMs available for my phone (using XDA of course and others) and found that there were a few out there. So, I downloaded one (wish I could remember which one) and attempted to install it...keyword there. After attempting the install, my phone would not boot. Like at all. Dead. So back to the drawing board I went to try and reverse the damage. Using XDA (ironically) and a plethora of other sites, I tried to resurrect my phone and bring it back to life. After countless hours of trying and trying and trying and more and more research, I just gave up. The phone is dead. Great. $170 spent on a phone to break it a year later.
It's been roughly 4-5 months since I have attempted to redo the process and after another minor attempt, somehow I was able to remove the root completely, including the custom recovery and ROM. I don't know what the heck I did, but it worked....sort of. The phone is now stuck in a bootloop on the logo and sometimes the "bootloader has been unlocked" screen when try and factory reset the phone from the default recovery. When trying to reinstall the stock firmware, I read everywhere that I need the phone to have USB-debugging set and to have this and that. I have this and that installed on my PC, but obviously cannot enable USB-debugging which is needed for ADB and fastboot to recognize my device.
So, my question for anyone who would like to help me out is this: what are my options? Is the phone recoverable? Is there any way I can get ADB/fastboot to see my device and finally install the stock firmware on the phone? I have the proper drivers installed and ADB/fastboot are on my PC. Any help would be amazing, even if you have to tell me to junk it.
blckdragn22 said:
When trying to reinstall the stock firmware, I read everywhere that I need the phone to have USB-debugging set
Click to expand...
Click to collapse
This is incorrect, where did you read that? To reinstall the stock firmware using fastboot, you must be able to boot to the bootloader menu only.
I heard this from a few websites actually, although I could never find a situational fix for my phone. I am trying to restore back to Lollipop without a custom recovery, because within the past hour I found out TWRP was never fully removed when I tried booting into recovery from the AP Fastboot menu when doing to power+vol down option. The TWRP logo shows for about 10 seconds and then the phone tries booting normally, showing the unlocked bootloader warning.
So, yes I can boot into the bootloader menu all day long with no problems. It's just an selection I make doesn't get me anywhere. My question I guess now is: how do I go about reinstalling stock firmware via the bootloader menu. I have Minimal ADB and Fastboot installed on my PC. If I need the full ADB, I can download that. And of course I'd need the firmware, too.
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
_that said:
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
This thread had the firmware I was looking for thank you. I believe I have the flashing stock firmware process down, I hope. I'l refer to the guide if I need help. Thank you so much!
_that said:
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
I am trying to follow the steps listed here http://forum.xda-developers.com/showthread.php?t=2542219&page=35 and for some reason I cannot run any of the commands pertaining to the sparsechunks. This is what I get:
Is there anything you could tell me about that?
Edit: I was able to figure what the issue was when trying to write the sparsechunks. I had to insert a "." after 'sparsechunk' because that is how the file is named in the folder. However, now I am getting a new error, but it takes place on the phone screen. Every time I attempt to write a sparsechunk, it will initiate the process of doing so, but on the phone I'll get what appears to be an error saying, "Image is too large" in pink lettering. Why does this happen? Each sparsechunk file is at least 4MB less than the max-sparse-size according to the ADB and my phone, which is set to 256MB. Is there any way to change that?
blckdragn22 said:
However, now I am getting a new error, but it takes place on the phone screen. Every time I attempt to write a sparsechunk, it will initiate the process of doing so, but on the phone I'll get what appears to be an error saying, "Image is too large" in pink lettering. Why does this happen? Each sparsechunk file is at least 4MB less than the max-sparse-size according to the ADB and my phone, which is set to 256MB. Is there any way to change that?
Click to expand...
Click to collapse
Check which sparsechunk files you have and make sure you flash all of them in ascending order. If it still fails, copy/paste the contents of your command prompt window (no screenshots please).
_that said:
Check which sparsechunk files you have and make sure you flash all of them in ascending order. If it still fails, copy/paste the contents of your command prompt window (no screenshots please).
Click to expand...
Click to collapse
I will try that. There was a ...sparsechunks.0 as well apart from sparsechunks.1, sparsechunks.2 and sparsechunks.3. Shall I include that, too?
And adding the screenshot was an amateur mistake. My bad.
@_that this worked like a charm. Phone is 100% working ans usable now. Incredibly helpful. Thank you so much!
hello i am rooted with twrp recovery installed. I was able to unroot and download the latest 5.0.2-01001 ota but im not able to install the update it would just take me to twrp recovery and stop there.?? i found the update zip and tried to flash it in twrp but it says it cant mount and failed to flash any help would be appreciated.
OTA updates will require a stock recovery. I'm in the process of getting an Idol 3 but I used to have an Idol 2 and, to return to a completely stock ROM, I had to use the Alcatel Mobile upgrade too which identified my phone, downloaded the correct firmware, and restored the phone. Prior to restoring back to stock, I had cwm and root.
Thanks for the reply I tried the software update but its not working keep saying I have the latest even when I did a full wipe. Using the latest 4.9.2 version...is there a way to make a twrp flashable ota zip from the downloaded update file in the ota cache..
lude86 said:
hello i am rooted with twrp recovery installed. I was able to unroot and download the latest 5.0.2-01001 ota but im not able to install the update it would just take me to twrp recovery and stop there.?? i found the update zip and tried to flash it in twrp but it says it cant mount and failed to flash any help would be appreciated.
Click to expand...
Click to collapse
You cannot be rooted and install a stock update...it's mentioned in several places throughout the forum. Quickest solution is to use the mobile q to restore the whole phone to factory (and in the process it will put the latest version on it). Otherwise you have to fully unroot AND if you have modified any files such as build.prop or other system files it still won't work. You CAN install with TWRP however in the process of the install it will overwrite it with stock recovery. If I had to guess I'd say you did not do the supersu FULL unroot.
famewolf said:
You cannot be rooted and install a stock update...it's mentioned in several places throughout the forum. Quickest solution is to use the mobile q to restore the whole phone to factory (and in the process it will put the latest version on it). Otherwise you have to fully unroot AND if you have modified any files such as build.prop or other system files it still won't work. You CAN install with TWRP however in the process of the install it will overwrite it with stock recovery. If I had to guess I'd say you did not do the supersu FULL unroot.
Click to expand...
Click to collapse
mobile Q is horse manure now. I ran into the same problem, whereby it says you're up to date (which it's not), even if you're running 5.0.2.7SMA-UEA1 ! I only know that one because I inadvertently flashed 5.0.2.7SMA-UEA1 today when I meant to flash 5.0.2.7SRA-UEA2.
Speaking of 5.0.2-01001, 5.0.2.7SRA-UEA2 is on longer the latest yeah... anyway we can update the firmware page? http://forum.xda-developers.com/idol-3/general/want-to-able-to-install-ota-updates-t3163745
I just tried to OTA update to 5.0.2-01001, but OTA of course does not work if TWRP is acting recovery; it just reboots to TWRP and then if you reboot system, nothing happens. Although seemingly never mentioned, we must remove TWRP (even read only TWRP) before updating OTA?
tekka-maki said:
mobile Q is horse manure now. I ran into the same problem, whereby it says you're up to date (which it's not), even if you're running 5.0.2.7SMA-UEA1 ! I only know that one because I inadvertently flashed 5.0.2.7SMA-UEA1 today when I meant to flash 5.0.2.7SRA-UEA2.
Speaking of 5.0.2-01001, 5.0.2.7SRA-UEA2 is on longer the latest yeah... anyway we can update the firmware page? http://forum.xda-developers.com/idol-3/general/want-to-able-to-install-ota-updates-t3163745
I just tried to OTA update to 5.0.2-01001, but OTA of course does not work if TWRP is acting recovery; it just reboots to TWRP and then if you reboot system, nothing happens. Although seemingly never mentioned, we must remove TWRP (even read only TWRP) before updating OTA?
Click to expand...
Click to collapse
The thread is closed. There is also no reason you NEED the most recent posted as you can flash any of them and then do an update. Mobile Q is the recommended method to re-do your phone if you can't manage to make a backup before messing with it. It has apparently worked just fine for people in this forum for every model type mentioned so the burden of proof is on your part if you can't get it to work.
famewolf said:
The thread is closed. There is also no reason you NEED the most recent posted as you can flash any of them and then do an update. Mobile Q is the recommended method to re-do your phone if you can't manage to make a backup before messing with it. It has apparently worked just fine for people in this forum for every model type mentioned so the burden of proof is on your part if you can't get it to work.
Click to expand...
Click to collapse
Why would the thread be 'closed'. OP's problem is unresolved.
'Worked' is the operative term for. Perhaps you haven't used to Mobile Q tool lately? As OP (and I) said (today), running OTA from 6045 now just reboots to TWRP, no install. Alternately, when attempting to update 6045 from Mobile Q, it just throws a funny English 'update no needed' kinduva message (pic). Incidentally, have you been to their website to find an update to this tool? Holy crap, in that respect, Mobile Q must be a virtual breakthrough for these boys! :laugh:
You're so helpful here famewolf. I've both appreciated and have been comforted by seeing your knowledge all over this subforum, since day 1. Please provide help. You tell me where this 'people' person is, and I'll wank on his boner for you. Then we have a definition of 'working fine' in stead of 'worked fine'. ? :angel:
tekka-maki said:
Why would the thread be 'closed'. OP's problem is unresolved.
'Worked' is the operative term for. Perhaps you haven't used to Mobile Q tool lately? As OP (and I) said (today), running OTA from 6045 now just reboots to TWRP, no install. Alternately, when attempting to update 6045 from Mobile Q, it just throws a funny English 'update no needed' kinduva message (pic). Incidentally, have you been to their website to find an update to this tool? Holy crap, in that respect, Mobile Q must be a virtual breakthrough for these boys! :laugh:
You're so helpful here famewolf. I've both appreciated and have been comforted by seeing your knowledge all over this subforum, since day 1. Please provide help. You tell me where this 'people' person is, and I'll wank on his boner for you. Then we have a definition of 'working fine' in stead of 'worked fine'. ? :angel:
Click to expand...
Click to collapse
The thread that is closed is the one YOU mentioned.... not the op. http://forum.xda-developers.com/idol-3/general/want-to-able-to-install-ota-updates-t3163745
I dont use mobile Q as I use Linux and they don't have a linux version. I use 3rd party roms such as AICP with the ARDE non OC rom. TWRP puts a log in /tmp...did you look at what the error message says? OTA updates will NOT apply if you have updated system files such as build.prop. Thats all I can tell you because I can't try what you are using.
famewolf said:
The thread that is closed is the one YOU mentioned.... not the op. http://forum.xda-developers.com/idol-3/general/want-to-able-to-install-ota-updates-t3163745
I dont use mobile Q as I use Linux and they don't have a linux version. I use 3rd party roms such as AICP with the ARDE non OC rom. TWRP puts a log in /tmp...did you look at what the error message says? OTA updates will NOT apply if you have updated system files such as build.prop. Thats all I can tell you because I can't try what you are using.
Click to expand...
Click to collapse
I haven't updated the build.prop, I doubt the OP has either.
'There is no greater software version available to upgrade your phone,actual version of your phone is the latest'
Hehe! Only thing that would make this funnier is if they misspelled 'version'. At least I can derive some amusement from that message and their ****ty, convoluted website.
Shame you can't help on that front, but maybe you can at least guide me on what should be normal flow of this procedure.
When one does OTA update unrooted (but with custom recovery), at the point that the phone reboots, it should not (in theory) boot into TWRP right? I would think just continue with update, and maybe that's why I would need to remove TWRP in favor of stock recovery.
It would be easier to attack it from that angle as opposed to their crappy win32 program. which they probably didn't pay the GoDaddy bill on.:laugh:
I don't even know why I'm bothering as it's just a backup phone now. I just find it ridiculous that I can get their last measly update either from Q or from device (ostensibly so long as custom recovery remains). Holy bejebus, updating Shamu is so painless (6.0.1)
---------- Post added at 08:41 PM ---------- Previous post was at 08:22 PM ----------
likely they have not updated their server side to to UEN0 from UEA2 for their craptacular tool which would explain that problem.
Curious, did you lose Band 12 with UEN0. I haven't heard anything positive from this most recent update that is giving me a headache to get to. Perhaps it's for naught. They don't even have a changelog do they. Meh... I'm going to forget about it until something notable comes along or maybe even just sell this thing while I might still get over a hundred.
tekka-maki said:
I haven't updated the build.prop, I doubt the OP has either.
'There is no greater software version available to upgrade your phone,actual version of your phone is the latest'
Hehe! Only thing that would make this funnier is if they misspelled 'version'. At least I can derive some amusement from that message and their ****ty, convoluted website.
Shame you can't help on that front, but maybe you can at least guide me on what should be normal flow of this procedure.
When one does OTA update unrooted (but with custom recovery), at the point that the phone reboots, it should not (in theory) boot into TWRP right? I would think just continue with update, and maybe that's why I would need to remove TWRP in favor of stock recovery.
It would be easier to attack it from that angle as opposed to their crappy win32 program. which they probably didn't pay the GoDaddy bill on.:laugh:
I don't even know why I'm bothering as it's just a backup phone now. I just find it ridiculous that I can get their last measly update either from Q or from device (ostensibly so long as custom recovery remains). Holy bejebus, updating Shamu is so painless (6.0.1)
---------- Post added at 08:41 PM ---------- Previous post was at 08:22 PM ----------
likely they have not updated their server side to to UEN0 from UEA2 for their craptacular tool which would explain that problem.
Curious, did you lose Band 12 with UEN0. I haven't heard anything positive from this most recent update that is giving me a headache to get to. Perhaps it's for naught. They don't even have a changelog do they. Meh... I'm going to forget about it until something notable comes along or maybe even just sell this thing while I might still get over a hundred.
Click to expand...
Click to collapse
As I mentioned here: http://forum.xda-developers.com/showpost.php?p=64967202&postcount=4 you CAN install an OTA update with twrp...it will install it just fine however at the completion of the update you will no longer HAVE twrp installed because it will have been overwritten with stock recovery. (it does that at the END) This will be apparent the NEXT time you try to load recovery. Where do you imagine the update is processed? It's processed by the recovery app...it can't be done inside the rom because files would be in use. The last version I ever ran was UER0..was not even aware UEN0 was out. As I indicated, I switched to a rom based on cyanogenmod with some features I wanted...if I was going to switch NOW I'd choose blisspop and it's the one I intend to install the next time I have to do a reinstall. I don't see why you fight on 5.02 when 5.1.1 is available in various flavors and with the ARDE NON OC Kernel is rock steady. If you made full backups of your device (ie dd images of ALL partitions using the Backupall bat file or shell script running around the forum restoring to a previous radio is as simple as reflashing the partition using fastboot commands.
The radio is stored in the "modem" partition fyi.
famewolf said:
As I mentioned here: http://forum.xda-developers.com/showpost.php?p=64967202&postcount=4 you CAN install an OTA update with twrp...it will install it just fine however at the completion of the update you will no longer HAVE twrp installed because it will have been overwritten with stock recovery. (it does that at the END) This will be apparent the NEXT time you try to load recovery. Where do you imagine the update is processed? It's processed by the recovery app...it can't be done inside the rom because files would be in use. The last version I ever ran was UER0..was not even aware UEN0 was out. As I indicated, I switched to a rom based on cyanogenmod with some features I wanted...if I was going to switch NOW I'd choose blisspop and it's the one I intend to install the next time I have to do a reinstall. I don't see why you fight on 5.02 when 5.1.1 is available in various flavors and with the ARDE NON OC Kernel is rock steady. If you made full backups of your device (ie dd images of ALL partitions using the Backupall bat file or shell script running around the forum restoring to a previous radio is as simple as reflashing the partition using fastboot commands.
The radio is stored in the "modem" partition fyi.
Click to expand...
Click to collapse
So where is the latest update to flash with twrp (good dry run for me should a decent upgrade come out that isn't UEN0)? I just went with UER0 posted on yer thread thr with all the megaupload firmwares & flash restored system & boot (after full wipe); as an aside, it took, & I still have TWRP in tact. I'm well aware of your fastboot method & orig backup of ALL partitions. Seemed like a waste of space at the time, still kinda does.
Regarding your rhetorical question, I was referencing Alcatel's w32 Q tool. It seemingly wasn't updated to be keyed in on the latest update either. No wait, it said the same 'no greater version' crap even when I restored the original 6045i US system/boot fw from twrp, lmao
tekka-maki said:
So where is the latest update to flash with twrp (good dry run for me should a decent upgrade come out that isn't UEN0)? I just went with UER0 posted on yer thread thr with all the megaupload firmwares & flash restored system & boot (after full wipe); as an aside, it took, & I still have TWRP in tact. I'm well aware of your fastboot method & orig backup of ALL partitions. Seemed like a waste of space at the time, still kinda does.
Regarding your rhetorical question, I was referencing Alcatel's w32 Q tool. It seemingly wasn't updated to be keyed in on the latest update either. No wait, it said the same 'no greater version' crap even when I restored the original 6045i US system/boot fw from twrp, lmao
Click to expand...
Click to collapse
Why are you assuming I should know where the latest and greatest update for stock should be? Updates are customized based on the rom version you are running at the time you submit a request. I've already stated I'm using a 3rd party rom and using an OS that doesn't allow me to run their software. You consider my recommendations a waste of time so I'll quit making them and continue using my perfectly working device on 5.1.1.
famewolf said:
Why are you assuming I should know where the latest and greatest update for stock should be? Updates are customized based on the rom version you are running at the time you submit a request. I've already stated I'm using a 3rd party rom and using an OS that doesn't allow me to run their software. You consider my recommendations a waste of time so I'll quit making them and continue using my perfectly working device on 5.1.1.
Click to expand...
Click to collapse
Omfg buddy, you said, '... you CAN install an OTA update with twrp' ; all I did was point out that I flashed previous updates (presumably the same way you're talking about), TWRP remained in tact afterward, & asked you to follow through with that point with, you know, the actual update in question here that defies many of your assertions. One of your recommendations is broken (Q), the other is hindsight (full backup) & last (update via TWRP) seemingly not feasible (unless someone were to submit updated /system) . Anyway it's all a moot point now since we're just measuring our junk.
I'm tickled you're running 5.1.1, as you've said repeatedly... I tried it briefly on Shamu & was happy to leave the LP quagmire all together & get to 6.0.1. Sufficed to say, there isn't anything perfect about this device or 5.1.1, which is why I'll leave as is & sell it. :good:
Thanks anyway.