Hi after trying to fix a brick, with SRKTools, Italian Knife and later DC Phoenix solutions, power off the phone from the fastboot and I can´t boot again(bad load to bootloader?). Can´t recognize by pc, only make a sound when be connected. No fastboot, download or any other mode. Really dead. Any advice?
Thanks in advance.
Federico.
Related
i rooted my phone and i wanted to switch rom for it,i flashed h850 rom rebooted device and it wont boot...i figured im on qualcomm 9008 mode in my computer so what can i do?
please please help me!!
thanks in advance..
Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...
Dark Nightmare said:
Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...
Click to expand...
Click to collapse
You probably didnt understand me well.. I cant put it in any mode...it wont turn on on any condition..
You said you rebooted twice, that tells me the device powers on, therefore, by doing a battery pull, holding the recovery or download mode button combos and powering up should get you into the desired mode. IF its not powering on at all:
1. Try charging the battery externally and try again.
2. See if the device is being recognized by a pc, if so there is hope that resting the device and trying again may work or we can see what mode it is in via adb/fastboot to get the device into a recoverable mode.
So....
Dark Nightmare said:
You said you rebooted twice, that tells me the device powers on, therefore, by doing a battery pull, holding the recovery or download mode button combos and powering up should get you into the desired mode. IF its not powering on at all:
1. Try charging the battery externally and try again.
2. See if the device is being recognized by a pc, if so there is hope that resting the device and trying again may work or we can see what mode it is in via adb/fastboot to get the device into a recoverable mode.
So....
Click to expand...
Click to collapse
The computer recognizes my device as qualcomm 9008
I have the same problem. My phone is dead only shows Qualcomm 9008.
Silly... If it's not for your phone why would you flash it??? Might have to wait for the official kdz from lg assuming you can some how get it into download mode. Or simply use your insurance for a new device. Expensive lesson learned
Maybe you can try the lg mobile support tool, since a tot file is available LG may have the stock kdz file available now, so try the recovery option for the mobile support tool.
Pretty sure that Qualcomm message thing is the true hard brick...
Sent from my pretty nifty brand new LG V10
This might sound stupid and it is usually for devices which have problems turning on or similar. I think is better to try anything that not trying all the options.
Why dont you try removing the battery, then close the module part without the battery. Press and hold the power button for at least 30 seconds. then release it. then put the batttery back on and try to make it boot into download mode. Chances are slim but the chance still there. This worked with my Samsung galaxy s5 after i flashed a rom that claimed to be for all models including the tmobile version when it clearly was for the g900f version . and i decided to try what i have done with other types of electronics and it worked.
Just tried on my phone. No go. Still dead. Trying lg repair. Hope I can get it fixed and not cost a arm and a leg.
Here is a guide to recover from 9008 mode
Here is a tool to extract kdz from tot
I've not read through these all the way, but if the PC sees it at all, it's not truly bricked... It might just be a pain in the ... to get it fixed. Those 2 links are good starting points for you. I hope you get this resolved.
I have the same error... My LG g5 H860 no turn on only connect in the PC on mode Qualcomm HS-USB QDLoader 9800.
Any idea or solution to resolve this?
Thx
BR
Dark Nightmare said:
Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...
Click to expand...
Click to collapse
same issue just that my lgg5 tm is stuck on the firmware update for trying to root via lgup/tot file now not even lg bridge reads the phone it wants to then it says can not odetect nothin has worked
Hello to everybody.
I have a problem with my mate8.
After flash rom on TWRP phone will not boot. Only a black screen (phone off), no logo, no bootloop. Twrp recovery does not run, eRecovery not run.
Phone does not react to any combination of volume + - and power. After connecting to the PC is still in fastboot mode. Even with the battery disconnected.
Rayglobe knife or SRKtool performs unbrick but the phone will not boot, it is still only in fastboot. TWRP or eRecovery installs, but will not boot.
Fastboot commands some works, adb commands says "device not found " , "waiting for device" or remote: command not allowed.
It is possible to install UPDATE.APP via fastboot?
Bootloader is unlocked and FRP locked. I can not turn on USB debugging.
Is there any way to recover your phone, or is totally dead?
Helps DC Phoenix?
Thanks for any ideas.
EDIT: Solved. Using DC Phoenix, unbrick and phone works again.
How??? My phone is dead also l29 c158
I CAN GET TO FAST BOOT.....FLASHED ALLTHAT T I CAN BUT NO RESULT....I PURCHASED CREDITS ON DC PHOENIX BUT TILL NOW NO RESULT AS IT CANT RECOGNIZE MY PHONE...
My phone was still in fastboot mode, so it was easier.
I followed instructions (Huawei Mate S flashing in fastboot by DC Phoenix on YouTube) .
My version is NXT-L29 C432.
I downloaded the official firmware C432 B320 and DC Phoenix performed a flash.
It was then a little problem with the battery, but unplugging, turning on the phone without the battery and then reconnect the battery managed to turn the phone on. Then I flash the firmware update.app in stock recovery and the phone is alive.
Spent 15 euros, but better than brick.
I would try to support dc phoenix. It might help.
Thank you...After trying to flash new firmware by DC phoenix.....My phone is completely dead.....NO power working....I think I must search for a new phone....anyway .......just I advise everyone to be careful when rooting Nougat.....
When connecting a charger flashes red, or does not respond at all?
premda said:
When connecting a charger flashes red, or does not respond at all?
Click to expand...
Click to collapse
NO response at all....no repose to charging or PC at all...
basimzanaty said:
NO response at all....no repose to charging or PC at all...
Click to expand...
Click to collapse
Windows Device Manager does not detect the attached device?
He is probably dead :crying:
My mate 8 NXT -L29 is completely dead.I updated to noughat B563 and i found out my Bluetooth was not working completely,then i tried to downgrade it to B500 ,the update got 99% and then phone got switched off.No waking up no matter what.I tried the hard reset too with all combinations of voume and power button but no response.BUt when i connect my phone to PC Huawei suite opens up but cannot access. I removed the battery and then inserted it , still no life.Please give me a solution.
Hello This is my first post here and i really need help. I got a phone that is hardbricked and when i turn it on it is stuck on LG Logo. I cant enter download mode, recovery mode, hard reset mode its just stuck.
When i plug it in into the PC nothing happens, i installed all the drivers for it and still nothing not even a sound that it loaded. I did a lot of google research and i see that there is an option to do it in Qualcom mode.
But to do that i need to find the testpoint first. This is the only thing that i found https://forum.xda-developers.com/android/general/lg-d320-l70-testpoint-location-t3422105 but the problem is that i cant turn on my phone when my components are apart and everything is disconnected. So later i saw that this cannot be and i was wondering if anyone knows where i can find testpoint and how to i repair my phone.
Thank you and sorry for any missunderstanding that i caused
I tried to downgrade my phone from the Oreo version to Nugat, the process started, but after the first reboot looks like the bricked is device, I tried to start in fastboot or recovery mode but it doesnt work...When I put the phone to charge nothing happens ... When I plug the phone to the pc does not recognize, however the windows plays the sound of the device when connects.
Can someone help me please? thank you!
Sorry for my bad english
hi
your from Brasil ??
leandro9000 said:
I tried to downgrade my phone from the Oreo version to Nugat, the process started, but after the first reboot looks like the bricked is device, I tried to start in fastboot or recovery mode but it doesnt work...When I put the phone to charge nothing happens ... When I plug the phone to the pc does not recognize, however the windows plays the sound of the device when connects.
Can someone help me please? thank you!
Sorry for my bad english
Click to expand...
Click to collapse
how did you be able to downgrade it?
no need help ....no return here...no need fix nothing
Model:Huawei p40 lite
Hello, recently I flashed most propably bad firmware version and now the device seems to be soft bricked.
Black screen, no vibration while pressing power button, nothing.
However when I connect phone to PC, it does detect a device, I download HiSuite and device gets detected as Sooner ADB interface, but via HiSuite shows that recovery is not supported within the model.
ADB is also installed but devices show no devices at all.
When I press power button and volume down it seems to enter another state but device name/driver is the same. No fastboot.
It seems like it is not dead at all but I would have to use somekind of flash tool.
Any ideas would be appreciated
Thanks
Hi, is there a solution?
I need a solution to. Someone?
I am in the same situation. Is there someone to help?