Good day gents and ladies
Well let me start from the beginning.
I'm was using mi-globe 6.12.22
Last week Friday evening downloaded 7.2.9 mi-globe,read around the mi-globe forum.Didn't see anything funny so flashed via twrp on Saturday morning.Hmmmmmmmm this is when all my problems started.
Basically what I should of done is download 7.2.9,new 3.0.3 twrp for norgat,go into recovery flash new recovery, restart recovery,flash 7.2.9 and then have happy days.But it wasn't to be and now I'm basically sitting with a useless mi4c device.
The device works but warms up and I only get about 4 hours battery life.
If I try boot into recovery I just get black screen.
If I connect device to PC it is not recognized, have tried 3 x different laptop/PC's and different cables.
So fastboot,mi-flash,mi-unlock are all not possible as device is not recognized.
I have been trying different solutions without any success.
I think if it would be possible to root device directly without PC then maybe it will be possible to get flashfire working and I can flash new norgat recovery?
Any suggestions would be greatly appreciated?
NB.I have tried loading Qualcomm drivers ,google drivers etc etc.no luck can't connect my device too PC,either get device not recognized or the PC doesn't even see the device.Enable USB debugging etc etc nothing works.Been fiddling for 4 days!!!!!!!
Tried to root with kingoroot,framaroot directly on device etc nothing works?
Please help,else device is a nice piece of plastic that holds paper down on my table.lol
BR
Ant
have you tried fastboot
fastboot oem edl
Click to expand...
Click to collapse
then MiFlash to flash official rom
Fastboot don't work,as PC don't see the phone?
DeAntman said:
Fastboot don't work,as PC don't see the phone?
Click to expand...
Click to collapse
Is usb charging via pc working and have you tried miui updater? , This seems weird state you have ... If none working might be tried deep flash cable flashing ... Or go to nearest service center. Hope that help. Best luck.
Hi,yes USB chargers device via PC but that's all.
How does one deep flash,could you post link please?
I bought the device in China about 18 months ago,Xiaomi never sold mi4c in my country so doubt they could help me locally.
Seems I have soft bricked the device?Tried every thing no solution.
If it would possible to root without USB cable I could maybe try flash new twrp via flash fire?Then could wipe all and try start again?
DeAntman said:
Hi,yes USB chargers device via PC but that's all.
How does one deep flash,could you post link please?
I bought the device in China about 18 months ago,Xiaomi never sold mi4c in my country so doubt they could help me locally.
Seems I have soft bricked the device?Tried every thing no solution.
If it would possible to root without USB cable I could maybe try flash new twrp via flash fire?Then could wipe all and try start again?
Click to expand...
Click to collapse
You havent answered the miui updater part, have you tried flash miui rom.zip, using miui updater apps ?
Does fastboot mode boot on your phone ? i mean the bunny sceen showed up ?
For dfc here the link http://xiaomitips.com/guide/miui-deep-flash-engineering-cable-solution-to-non-edl-device/
Please take dfc as last resort. And do research more on this... Do with your own risk. Good luck
Hi,
Yes sorry I have tried updater, I download rom start updater it starts but after about 2 minutes stops and phones shuts down.
I then have to restart phone with long press of power button. It restarts but nothing has changed.
Wrt fastboot it goes into fastboot but this is useless cause no Pc can see my device and if it sees it it sees unknown device, spent countless hours trying different things without any success.
Seems have soft bricked the device, phone works but gets hot and battery life maybe 4 hours if I'm lucky?
Not sure what more today?
DeAntman said:
Hi,
Yes sorry I have tried updater, I download rom start updater it starts but after about 2 minutes stops and phones shuts down.
I then have to restart phone with long press of power button. It restarts but nothing has changed.
Wrt fastboot it goes into fastboot but this is useless cause no Pc can see my device and if it sees it it sees unknown device, spent countless hours trying different things without any success.
Seems have soft bricked the device, phone works but gets hot and battery life maybe 4 hours if I'm lucky?
Not sure what more today?
Click to expand...
Click to collapse
Before this has your pc able to use the miflash ? Try to follow this guide to setup it correctly http://en.miui.com/thread-136188-1-1.html ... I follow this guide and the adb n fastboot even works on an old pentium 4, 512mb ram, win xp laptop.
Ps: I think, its only a matter of incorrect driver setup on your side, best luck.
Hi, I tried to get update from C185B320 to C185B560 through https://forum.xda-developers.com/mate-8/general/update-to-nougat-easiest-playstore-app-t3554957, but it didnt go well, so i rollback (coz people saying it works with lesser verison than C185B320) to C900B500 (i think, maybe B320).
Then i unlocked bootloader, installed recovery and twrp, then i tried to root my phone, but it didnt go well too. It only showed me that orange text, that it is unlocked and not safe or something like that, and device is booting in 5 sec, but never happened. I managed to somehow install back C185B160 (not sure how) and rooted phone correctly. Then i tried to rebrand to EU (C432) with guide https://www.youtube.com/watch?v=JZVsIKtdgV4. But at the end, i was getting C900B320, so i went back to C185B160 and it downloaded B560 update(with that app), so i was happy, put into DLOAD and started update, but it failed 5%, so i tried another update (C185B162) and after i put this into DLOAD and succesfully updated phone, it is not responding anymore. Display not working, phone not vibrating when restarting, led when it is plugged into the wall, or PC not lightning up. Only when working with SRK, or italian knife and reboot phone, it makes sounds when you disconnect your device from your pc and connect back in.
Can you please help me, i am pretty screwed up.
EDIT: ok i managed to get into the phone again, but my sim is not working (in DC phoenix is shown at the begining as Current version: NextL09C185EMUI50, but later as Build number: :NXT-L29C185B320, Product model: HUAWEI NXT-L29 how can i make my simcard working again?
Hi, how get back in your phone? i´m in the same trouble but i cant back in the fastboot or something again? Thanks in advance.
Federico
SEoR said:
Hi, I tried to get update from C185B320 to C185B560 through https://forum.xda-developers.com/mate-8/general/update-to-nougat-easiest-playstore-app-t3554957, but it didnt go well, so i rollback (coz people saying it works with lesser verison than C185B320) to C900B500 (i think, maybe B320).
Then i unlocked bootloader, installed recovery and twrp, then i tried to root my phone, but it didnt go well too. It only showed me that orange text, that it is unlocked and not safe or something like that, and device is booting in 5 sec, but never happened. I managed to somehow install back C185B160 (not sure how) and rooted phone correctly. Then i tried to rebrand to EU (C432) with guide https://www.youtube.com/watch?v=JZVsIKtdgV4. But at the end, i was getting C900B320, so i went back to C185B160 and it downloaded B560 update(with that app), so i was happy, put into DLOAD and started update, but it failed 5%, so i tried another update (C185B162) and after i put this into DLOAD and succesfully updated phone, it is not responding anymore. Display not working, phone not vibrating when restarting, led when it is plugged into the wall, or PC not lightning up. Only when working with SRK, or italian knife and reboot phone, it makes sounds when you disconnect your device from your pc and connect back in.
Can you please help me, i am pretty screwed up.
EDIT: ok i managed to get into the phone again, but my sim is not working (in DC phoenix is shown at the begining as Current version: NextL09C185EMUI50, but later as Build number: :NXT-L29C185B320, Product model: HUAWEI NXT-L29 how can i make my simcard working again?
Click to expand...
Click to collapse
First of all i tried unbrick via srk tool, but didnt work for me, si i used dcphoenix tool and it worked
Thanks, what tool of all of DCPhoenix?
SEoR said:
First of all i tried unbrick via srk tool, but didnt work for me, si i used dcphoenix tool and it worked
Click to expand...
Click to collapse
Hello, I will show you the method that I use to unbrick my nubia red magic 3s, also works for 3
and this is the message that we will find:
1-we occupy having a USB of at least 4 gb, and OTG USB
2-have the ADB drivers installed and fastboot I recommend V1.3 https://forum.xda-developers.com/showthread.php?t=2588979
3-first you have to put the device in fastboot mode, this is achieved by having the phone completely turned off,
turn on and at the same time press the volume down key, with this we will be in fastboot mode
4-download the file recovery.img this is the factory recovery I will leave 2 versions one for the filmware of the 3s and the other for the 3 and copy it to the adb folder
Recovery 3s V114 Nort America:
http://www.mediafire.com/file/17kxwkxzz4yjiis/recovery.img/file
Recovery 3 V118 Nort America rename the file to recovery.img before going to the adb folder:
http://www.mediafire.com/file/u3n1kumg0m4f6wk/3recovery.img/file
5-download the filmware that corresponds to your device https://help.redmagic.gg/hc/en-us/sections/360005986031-Global-ROMs-and-Updates
6-connect the device to the computer and open a cmd window inside the adb folder
and we execute the following commands:
"fastboot devices" omit the quotes
"fastboot oem nubia_unlock NUBIA_NX629J"
"fastboot flash recovery recovery.img"
7-You can now disconnect your device from the computer, now copy the filmware that I previously downloaded to the root of the USB, now connect the USB to the device using the OTG USB
with the volume up / down buttons navigate to the option to restart in recovery mode
8-within recovery choose the language and proceed to install the filmware through disk
9-on the first reboot your device might get stuck in boot logo, but don't despair if this happens hold down the shutdown button until the device turns off completely, now turn it on and hold down the volume down button to enter fastboot mode again, browse again and reboot the device in recovery mode
10-inside recovery make factory reset and reboot, finally it will have come out of brick:good:. and you can use this guide to customize your device:
https://forum.xda-developers.com/red-magic-3/themes/dark-theme-navigation-gestures-global-t4080157
This was the solution I found, I hope it will serve you very much
Something strange happen to my red magic 3s , practically every 7 months i should buy one cable because charge less (mA) so the first time i did buy the phone with the (normal default charger) + the (Quick charger 3.0 with the usb type-c cable for spare) , this this Quick charger cable did work for 7 month because afther did start with the less charger like 200 (mA), so i did buy another usb type-c cable and did work , so 15 day ago this cable did start again with less charger, so i did buy another cable and in this while i did use the (default charger cable) and strange thing did happen , the default charger that was new did charger good like 3.000 mA for 1 day , the next day did start to charger less, and this is impossible because i did use this charger cable just 6 day , because this charger was for spare and i did use just when i waited shipment of the package for the other cable , so today i did get the new cable , i did try and charger less mA i dont believe really , so i did try all the charger with the new cable but same problem less mA, so i remembered had the adpater universal rampow that charger to 1a 2a for phone and tablet and i did use for years with my old iphone and android device , so i did put the new cable to port 2a and the magic thing happen again , charger less (mA) like every one , but afther 10 sec the screen block and the phone reboot ,when did reboot work fine but if i put to charger will get blocked screen and reboot , so i say "omg i can t charger more if will block and reboot while charger " so i did try to reset the phone , i download the roms Europe & Asia: V212 on the root folder and install local, when did get 100% this did happen "Device is corrupt. It can't be trusted and will not boot" so i did think omg what going on , practically if you put one charger or one cable not original will brick your phone , but the problem is if i put the cable on windows for install a new roms , windows will not detected the new hardware so i can t use adb or another thing, and i want remember that this default cable it new i did use like 6 day ,so now I'm thinking what can i do for unbrick the phone and afther discovery the problem about the less mA .
cacaocaca said:
Something strange happen to my red magic 3s , practically every 7 months i should buy one cable because charge less (mA) so the first time i did buy the phone with the (normal default charger) + the (Quick charger 3.0 with the usb type-c cable for spare) , this this Quick charger cable did work for 7 month because afther did start with the less charger like 200 (mA), so i did buy another usb type-c cable and did work , so 15 day ago this cable did start again with less charger, so i did buy another cable and in this while i did use the (default charger cable) and strange thing did happen , the default charger that was new did charger good like 3.000 mA for 1 day , the next day did start to charger less, and this is impossible because i did use this charger cable just 6 day , because this charger was for spare and i did use just when i waited shipment of the package for the other cable , so today i did get the new cable , i did try and charger less mA i dont believe really , so i did try all the charger with the new cable but same problem less mA, so i remembered had the adpater universal rampow that charger to 1a 2a for phone and tablet and i did use for years with my old iphone and android device , so i did put the new cable to port 2a and the magic thing happen again , charger less (mA) like every one , but afther 10 sec the screen block and the phone reboot ,when did reboot work fine but if i put to charger will get blocked screen and reboot , so i say "omg i can t charger more if will block and reboot while charger " so i did try to reset the phone , i download the roms Europe & Asia: V212 on the root folder and install local, when did get 100% this did happen "Device is corrupt. It can't be trusted and will not boot" so i did think omg what going on , practically if you put one charger or one cable not original will brick your phone , but the problem is if i put the cable on windows for install a new roms , windows will not detected the new hardware so i can t use adb or another thing, and i want remember that this default cable it new i did use like 6 day ,so now I'm thinking what can i do for unbrick the phone and afther discovery the problem about the less mA .
Click to expand...
Click to collapse
First of all unbrick your device via unbrick tool by edl mode if you can after that try to tranfer to cn rom and try again your experiments i think. Because cn rom has more AI features instead of global.
And someone please help me plss
First of all my phone is unlocked,
I can use adb, my phone work smothly with every version of rom, the problem is my device can't recognised in fastboot. Not in win 7/win 10 and also afrer turn the driver signatures off it can't.
Device manager act like nothing connected to pc when it is in fastboot mode, i also try cn rom ,unbrick via local update to asia , unbrick via edl mode to asia etc... So if anybidy can help please tell me, i am gettting tired by searching for solution.
RoseRahman said:
First of all unbrick your device via unbrick tool by edl mode if you can after that try to tranfer to cn rom and try again your experiments i think. Because cn rom has more AI features instead of global.
Click to expand...
Click to collapse
how can i transfer if windows dont want detect the phone and i did install all the driver
cacaocaca said:
how can i transfer if windows dont want detect the phone and i did install all the driver
Click to expand...
Click to collapse
Try to enter in 9008 mode
i did but windows doesn t detect nothing
cacaocaca said:
i did but windows doesn t detect nothing
Click to expand...
Click to collapse
Then it should be hardbrick and i think the QDL ports are need to be sort in the motherboard to unbrick it, i think try service centre is the best way now.
I did talk with service center already I wait
cacaocaca said:
I did talk with service center already I wait
Click to expand...
Click to collapse
Wait untill they reply but i think they will say motherboard failure which i think not possible, but if they successfully unbrick it then it will be a good news for you.
Motherboard failure or not them will fix it and the phone it still in warranty , I from Italy and the warranty from europe it 2 years, has passed 1 years and 2 months still, I don’t know still if I should to tell to them that I did use another charge when did happen that , but the charge I think it not the real problem , because I did use this charge with my old iPhone 6s to 2 ampere , and the red magic support also the charge to 3 ampere so I don’t think it the the problem , maybe them have some script where if I use another charger will happen that.
cacaocaca said:
Motherboard failure or not them will fix it and the phone it still in warranty , I from Italy and the warranty from europe it 2 years, has passed 1 years and 2 months still, I don’t know still if I should to tell to them that I did use another charge when did happen that , but the charge I think it not the real problem , because I did use this charge with my old iPhone 6s to 2 ampere , and the red magic support also the charge to 3 ampere so I don’t think it the the problem , maybe them have some script where if I use another charger will happen that.
Click to expand...
Click to collapse
Which Room you used?
lilo_ind said:
Which Room you used?
Click to expand...
Click to collapse
The official roms eu 212
What if may device is lock? It will unlock may device or end up hardbrick may device because its lock? Or working on unlock and lock device? May rm3s is lock and not root. Im scared please help me
mojako09 said:
What if may device is lock? It will unlock may device or end up hardbrick may device because its lock? Or working on unlock and lock device? May rm3s is lock and not root. Im scared please help me
Click to expand...
Click to collapse
Unlock for permission to root, if you want to lock without brick u must wipe cache data system then flash your rom then reboot to recovery then install rom again
pablo2005 said:
Hello, I will show you the method that I use to unbrick my nubia red magic 3s, also works for 3
and this is the message that we will find:
1-we occupy having a USB of at least 4 gb, and OTG USB
2-have the ADB drivers installed and fastboot I recommend V1.3 https://forum.xda-developers.com/showthread.php?t=2588979
3-first you have to put the device in fastboot mode, this is achieved by having the phone completely turned off,
turn on and at the same time press the volume down key, with this we will be in fastboot mode
4-download the file recovery.img this is the factory recovery I will leave 2 versions one for the filmware of the 3s and the other for the 3 and copy it to the adb folder
Recovery 3s V114 Nort America:
http://www.mediafire.com/file/17kxwkxzz4yjiis/recovery.img/file
Recovery 3 V118 Nort America rename the file to recovery.img before going to the adb folder:
http://www.mediafire.com/file/u3n1kumg0m4f6wk/3recovery.img/file
5-download the filmware that corresponds to your device https://help.redmagic.gg/hc/en-us/sections/360005986031-Global-ROMs-and-Updates
6-connect the device to the computer and open a cmd window inside the adb folder
and we execute the following commands:
"fastboot devices" omit the quotes
"fastboot oem nubia_unlock NUBIA_NX629J"
"fastboot flash recovery recovery.img"
7-You can now disconnect your device from the computer, now copy the filmware that I previously downloaded to the root of the USB, now connect the USB to the device using the OTG USB
with the volume up / down buttons navigate to the option to restart in recovery mode
8-within recovery choose the language and proceed to install the filmware through disk
9-on the first reboot your device might get stuck in boot logo, but don't despair if this happens hold down the shutdown button until the device turns off completely, now turn it on and hold down the volume down button to enter fastboot mode again, browse again and reboot the device in recovery mode
10-inside recovery make factory reset and reboot, finally it will have come out of brick:good:. and you can use this guide to customize your device:
https://forum.xda-developers.com/red-magic-3/themes/dark-theme-navigation-gestures-global-t4080157
This was the solution I found, I hope it will serve you very much
Click to expand...
Click to collapse
Can i do this using a macbook? And if im successful with the unbrick can i install global rom even tho cn rom was the original rom of my phone?
RoseRahman said:
And someone please help me plss
First of all my phone is unlocked,
I can use adb, my phone work smothly with every version of rom, the problem is my device can't recognised in fastboot. Not in win 7/win 10 and also afrer turn the driver signatures off it can't.
Device manager act like nothing connected to pc when it is in fastboot mode, i also try cn rom ,unbrick via local update to asia , unbrick via edl mode to asia etc... So if anybidy can help please tell me, i am gettting tired by searching for solution.
Click to expand...
Click to collapse
facing the same damn problem phone is not getting detected in fastboot mode everywhere else it works now iam stuck in global rom without root
pablo2005 said:
Hello, I will show you the method that I use to unbrick my nubia red magic 3s, also works for 3
and this is the message that we will find:
1-we occupy having a USB of at least 4 gb, and OTG USB
2-have the ADB drivers installed and fastboot I recommend V1.3 https://forum.xda-developers.com/showthread.php?t=2588979
3-first you have to put the device in fastboot mode, this is achieved by having the phone completely turned off,
turn on and at the same time press the volume down key, with this we will be in fastboot mode
4-download the file recovery.img this is the factory recovery I will leave 2 versions one for the filmware of the 3s and the other for the 3 and copy it to the adb folder
Recovery 3s V114 Nort America:
http://www.mediafire.com/file/17kxwkxzz4yjiis/recovery.img/file
Recovery 3 V118 Nort America rename the file to recovery.img before going to the adb folder:
http://www.mediafire.com/file/u3n1kumg0m4f6wk/3recovery.img/file
5-download the filmware that corresponds to your device https://help.redmagic.gg/hc/en-us/sections/360005986031-Global-ROMs-and-Updates
6-connect the device to the computer and open a cmd window inside the adb folder
and we execute the following commands:
"fastboot devices" omit the quotes
"fastboot oem nubia_unlock NUBIA_NX629J"
"fastboot flash recovery recovery.img"
7-You can now disconnect your device from the computer, now copy the filmware that I previously downloaded to the root of the USB, now connect the USB to the device using the OTG USB
with the volume up / down buttons navigate to the option to restart in recovery mode
8-within recovery choose the language and proceed to install the filmware through disk
9-on the first reboot your device might get stuck in boot logo, but don't despair if this happens hold down the shutdown button until the device turns off completely, now turn it on and hold down the volume down button to enter fastboot mode again, browse again and reboot the device in recovery mode
10-inside recovery make factory reset and reboot, finally it will have come out of brick:good:. and you can use this guide to customize your device:
https://forum.xda-developers.com/red-magic-3/themes/dark-theme-navigation-gestures-global-t4080157
This was the solution I found, I hope it will serve you very much
Click to expand...
Click to collapse
dude thanks a lot you saved my phone. the best alternative for the unbrick tool(EU)
Hello there,
first of all excuse me if its wrong section to post such things.
My Redmi 9A won't turn on after i've flash it using PS Flash Tool , i've tried to charge it, button combinations and other things...
whenever i am connecting 9A to my PC it says "unrecognised USB device" and i am completely out of clue what can i do to bring it back to life.
any help will be appreciated
Got the same problem too i cant find a solution either, been searching for weeks
Same here after trying to unlock bootloader
Hi ! Same problem for me and I'm looking for a solution. I bricked my phone 2 months ago... there is 1 solution that I found but IMEI is lost (not a big problem, you can flash it) and mobile network connection is lost (this is my problem). So you can flash a custom recovery with SP Flash Tools and flash a custom ROM like Havoc OS through it and that's working excepted the mobile network connection...
I found the solution and fixed my friend's 9a. It seems that after doing stuff in brom mode, the phone gets stuck somehow and all hw buttons wouldn't work at all. What I did is I opened the phone and removed the battery cable and put it back to reset the phone state, then turned the phone on.
DummyCode said:
I found the solution and fixed my friend's 9a. It seems that after doing stuff in brom mode, the phone gets stuck somehow and all hw buttons wouldn't work at all. What I did is I opened the phone and removed the battery cable and put it back to reset the phone state, then turned the phone on.
Click to expand...
Click to collapse
Don't work for me
Rares656723 said:
Don't work for me
Click to expand...
Click to collapse
Try holding the volume and power buttons for more 2 seconds when connecting and bypassing