Database Info

[SGH-I337M] Lollipop Official Firmware + Modem - [MEGA]

Due to the high demand I am opening a thread with the stock firmware for the Canadian SGH-I337M with fast links from MEGA.
The firmware is multi-csc, so all Canadian carriers are supported.
Bell
I337MVLUGOC4 - 5.0.1 Lollipop - Click Here
Backup link thanks to nabbasi - Click Here
Rogers
I337MVLUGOC4 - 5.0.1 Lollipop - Click Here
Modem/Baseband
I337MVLUGOC4 - Modem - Click Here
To flash the firmware, extract the zip, and load the .md5 into the AP section of ODIN
Make sure only Auto Reboot and F. Reset Time is checked.
Put your phone into download mode (Press power+home+volume down) and click start in ODIN.
Once the flash is complete, hold volume up + home to boot into recovery. Select Wipe Data/Factory Reset and reboot.
To flash the modem only, load the .bin into the CP section of ODIN
Make sure only Auto Reboot and F. Reset Time is checked.
Put your phone into download mode (Press power+home+volume down) and click start in ODIN.
Phone will reboot and you are done.

If any one need backup link for stock rom for 5.0.1 (BMC) here it
https://mega.co.nz/#!2cN2RSZZ!V7O5uyA-q88dJtPmwstWarEIRCvr-SqIDEV_APaurQE

nabbasi said:
If any one need backup link for stock rom for 5.0.1 (BMC) here it
https://mega.co.nz/#!2cN2RSZZ!V7O5uyA-q88dJtPmwstWarEIRCvr-SqIDEV_APaurQE
Click to expand...
Click to collapse
Thanks, added to OP.

No worry man... actually I download wrong version I am waiting for rogers to release I think they might add support for Volte thats why it delay or I could be wrong....

nabbasi said:
No worry man... actually I download wrong version I am waiting for rogers to release I think they might add support for Volte thats why it delay or I could be wrong....
Click to expand...
Click to collapse
They are all the same.
By the way, the above Mega links don't work for me.
Edit: OP's link works with IE instead Chrome. Thank you!

Dude...
works in i337m telcel, Latin? only the signal... it works?

How does one update the bootloader using this firmware? I'm still on MDJ

stonecoldant said:
How does one update the bootloader using this firmware? I'm still on MDJ
Click to expand...
Click to collapse
If you want to update only the bootloader you can extract it from the firmware (Search the forums to find out how). Or you can just flash the full firmware package and it will update your entire phone including your bootloader. Alternatively, you can remove the bootloader from the firmware, and flash the new firmware while keeping your MDJ bootloader.

thanks for the quick reply, I flashed the firmware package once and it updated the ROM but not the baseband or bootloader for some strange reason. So I rebooted back in to download mode and flashed the package again and it did update that time. Interesting that it required two flashes to change both baseband and bootloader.

Has anyone tried the new OC4 radio with the MDJ/MG1 bootloader? And with KitKat?

Compatible with Mexico i337M
Hey, thanks for the MEGA link.
Apart from that I can confirm this rom is compatible with the Telcel i337M, mine is unlocked and I'm using it right now with Movistar and everything works, LTE and Wi-Fi. Word of advice, I had to flash it twice, the first one "Failed" the second one went through just fine.
Regards.

Thanks for the info about Telcel compatibility
EmmY2K said:
Hey, thanks for the MEGA link.
Apart from that I can confirm thi roms is compatible with the Telcel i337M, mine is unlocked and I'm using it right now with Movistar and everything works, LTE and Wi-Fi. Word of advice, I had to flash it twice, the first one "Failed" the second one went through just fine.
Regards.
Click to expand...
Click to collapse
Hey man, you just made my day.
I was wondering if this rom would work with the i337M.
Now I will download and flash for sure

Will this work with SGH-I337? Just want to make sure

ahmedbatty said:
Will this work with SGH-I337? Just want to make sure
Click to expand...
Click to collapse
No, SGH-I337M only.

So if I flash my I337M(Fido) with this rom in Odin to get stock Lollipop, then flash TWRP in Odin, then supersu.zip from TWRP recovery, will I have root?
Thanks

TRoN_1 said:
So if I flash my I337M(Fido) with this rom in Odin to get stock Lollipop, then flash TWRP in Odin, then supersu.zip from TWRP recovery, will I have root?
Thanks
Click to expand...
Click to collapse
Yes, you will have root with this method.

Just confirming that I also successfully installed the Rogers ROM on my Telcel SGH-I337m, right after Odin loaded the ROM, I pulled the battery out and back in, powered up the phone into download mode and loaded the latest Chainfire root and successfully rooted.

Missing Magazine
I have been playing with a lot of roms lately. I was looking for a TW Android 5. (Yes I like TW so Im weird). I found one that had the MAGAZINE feature. But sadly there was problems with the rom as it was not built for the Canadian Rogers i337m S4. This rom is a Android 5.0.1 but it seems to be missing the MAGAZINE and also shouldn't the Rogers version of this rom have ENGLISH (Canadian) support?
ADDED:
SO I see there is a ROGERS version of the rom out RWC-I337MVLUGOC4-2015041513.. Only there seems to be only two places to get this.. one from this crappy Rapid Gator site and this other German site both don't work and both want you to sign up for premium. Does anyone have this rom please.

sob2141 said:
I have been playing with a lot of roms lately. I was looking for a TW Android 5. (Yes I like TW so Im weird). I found one that had the MAGAZINE feature. But sadly there was problems with the rom as it was not built for the Canadian Rogers i337m S4. This rom is a Android 5.0.1 but it seems to be missing the MAGAZINE and also shouldn't the Rogers version of this rom have ENGLISH (Canadian) support?
ADDED:
SO I see there is a ROGERS version of the rom out RWC-I337MVLUGOC4-2015041513.. Only there seems to be only two places to get this.. one from this crappy Rapid Gator site and this other German site both don't work and both want you to sign up for premium. Does anyone have this rom please.
Click to expand...
Click to collapse
Added Link to OP for Rogers ROM.

sob2141 said:
I have been playing with a lot of roms lately. I was looking for a TW Android 5. (Yes I like TW so Im weird). I found one that had the MAGAZINE feature. But sadly there was problems with the rom as it was not built for the Canadian Rogers i337m S4. This rom is a Android 5.0.1 but it seems to be missing the MAGAZINE and also shouldn't the Rogers version of this rom have ENGLISH (Canadian) support?
ADDED:
SO I see there is a ROGERS version of the rom out RWC-I337MVLUGOC4-2015041513.. Only there seems to be only two places to get this.. one from this crappy Rapid Gator site and this other German site both don't work and both want you to sign up for premium. Does anyone have this rom please.
Click to expand...
Click to collapse
There is no different in rogers or bell stock rom. I have rogers s4 and using bell rom, only thing you have to do is change CSC after flashing the rom. you can use this code once you flash this rom use this on dialer *242*IMEI# than select what even you carrier you want to chose. after it will factory reset...

S6 - SM-G920i Firmware

Hey everyone,
I have a g920idvu1aod1 Samsung that I bought off of eBay, pretty sure it came from Latin America. Anyways, is there an OTA update or a firmware I can flash to get to 5.1.1? Everyone else seems to have this update but when I go into settings, there's nothing.
Any ideas?

India currently has the latest 5.1.1 firmware for the 920i. Download from: http://samsung-updates.com/details/48408/Galaxy_S6_SM-G920I/SM-G920I/INU/G920IDVU2COF8.html and flash with Odin.

The phone isn't from India though, like I said in the OP. It's from Latin America.. will it still work if I flash..? Because I believe that it's a different baseband version. Mine ends in AOD1.. the one you gave me ends in COF8.

self_slaughter said:
India currently has the latest 5.1.1 firmware for the 920i. Download from: http://samsung-updates.com/details/48408/Galaxy_S6_SM-G920I/SM-G920I/INU/G920IDVU2COF8.html and flash with Odin.
Click to expand...
Click to collapse
But I got the phone from Latin America, like I said in the OP. My firmware version ends in AOD1, the one you gave me is COF8.. will it still work?

Doesn't matter, still works.
The letters at the end are just the version number.
So long as it is for a 920i you're sweet to go. (My phone is from Australia, works fine on Indian firmware.)
edit: This link here should be faster to download the Samsung-updates, it's the same one I used on my phone.: http://d-h.st/YOpx
Use the "Download Now" button, not the normal "Download" Button for a direct link rather then a dodgy looking .exe file

self_slaughter said:
Doesn't matter, still works.
The letters at the end are just the version number.
So long as it is for a 920i you're sweet to go. (My phone is from Australia, works fine on Indian firmware.)
edit: This link here should be faster to download the Samsung-updates, it's the same one I used on my phone.: http://d-h.st/YOpx
Use the "Download Now" button, not the normal "Download" Button for a direct link rather then a dodgy looking .exe file
Click to expand...
Click to collapse
Alright, I'll try it out tonight! Do I just put this file in the "AP" section of odin and I'm good to go?
Do I have to be in "downloading" mode? Sorry, I'm a noob

SensualPuma said:
Alright, I'll try it out tonight! Do I just put this file in the "AP" section of odin and I'm good to go?
Do I have to be in "downloading" mode? Sorry, I'm a noob
Click to expand...
Click to collapse
Spot on mate. Put phone in Download mode, then flash with ap section of Odin.
Backup anything you want to keep first as this will erase absolutely everything on your phone and update your bootloader, baseband, modem etc. to the latest versions and start up like a brand new phone again.

self_slaughter said:
Spot on mate. Put phone in Download mode, then flash with ap section of Odin.
Backup anything you want to keep first as this will erase absolutely everything on your phone and update your bootloader, baseband, modem etc. to the latest versions and start up like a brand new phone again.
Click to expand...
Click to collapse
Does 5.1.1 have any improvements on the fingerprint sensor? Been kinda slow for me

SensualPuma said:
Does 5.1.1 have any improvements on the fingerprint sensor? Been kinda slow for me
Click to expand...
Click to collapse
Dunno, I gave up on it personally and just went back to swiping to unlock.

Flash this stock 51.1 ROM via odin.
http://www.sammobile.com/firmwares/download/50375/G920IDVU2COF8_G920IODD2COF8_BNG/

COGA is available now too
and success!

self_slaughter said:
COGA is available now too
and success!
Click to expand...
Click to collapse
hey man
- what you did before you download .enc4 ?
- this new version fix ram and battery bugs?
- do you like this new firmware?
- is faster?
Tnx please answer me

kmiloxdxd said:
hey man
- what you did before you download .enc4 ?
- this new version fix ram and battery bugs?
- do you like this new firmware?
- is faster?
Tnx please answer me
Click to expand...
Click to collapse
Dunno, only used it for 5 minutes.
Basically just wanted the new baseband, bootloader and modem then flashed back to a modified bogg for the system itself.

self_slaughter said:
Dunno, only used it for 5 minutes.
Basically just wanted the new baseband, bootloader and modem then flashed back to a modified bogg for the system itself.
Click to expand...
Click to collapse
Hey, how did you do that? I'm about to try a nandroid backup - flash new firmware using odin - restore nandroid backup. Would that work?

Tried to root, failed, total noon here.

Hey guys, today I tried to root my t-mobile s7 from a random YouTube video I found. After flashing a file from Odin, my phone got stuck in a boot loop.
I did a factory reset from recovery and the phone started up fine.
Now here's my problem, after doing a reset, the first thing I noticed was that while I was booting up the phone. It showed the usual Samsung Galaxy S7, followed by an unlocked padlock with the words "Custom" under it.
2nd issue. My phone just looks a lot different than when I originally bought it. It is also very sluggish, experiencing a lot of lag.
I've looked up how to go back to stock firmware but I'm not sure which one to use.
Any help would be appreciated.
I'm currently on the PG1 firmware.

It appears you still have the eng kernal... You can just re-run the root.bat and install SuperSu, or if you want complete stock follow the steps below:
*Also Before you try this turn it off and let it charge for 45 min-1 hour or so...*
1. Volume Down + Power + Home to put it in download mode
2. Then press Volume Up to continue past the warning screen even if nothing is displayed.
3. Grab The Latest Version of Odin here
4. Then Download The Stock Firmware, in this case you will need whichever version you have (if you do not remember you can just download the latest available firmware) Download Firmware and then extract it. (If you have 5 different files in the zip go to step 8)
5. Then install Samsung device drivers(if not already).
6. Start Odin, Plug in the S7, Load in the tar.md5 in the AP/PDA and uncheck Auto Reboot and Repartition.
7. Let the phone restart... VIOLA!!!
8. Alternatively if the zip has 5 files... They should all start with the corresponding buttons in Odin For Example:
AP_G930TUVS3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
BL_G930TUVS3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930TUVS3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_TMB_G930TTMB3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_TMB_G930TTMB3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
After they are entered into Odin you hit start and after a few minutes ... It should be fixed....
Let me know if you have any further questions or issues...

The custom is normal since you flashed a modified kernel.
Follow this instructions here for rooting / unrooting.
Most of these applies to Tmobile S7, expect specific ones mentioned for Verizon.
http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039

Thanks man, I'm gonna try to finish rooting. I thought my phone was just screwing up and the first part of the rooting process failed, since the bootloader.
I also tried sammobile and the download won't start.
If I were to download an earlier firmware, would I be able to update it to the most recent one?

Is it possible to revert to stock without wiping data?

Can I flash a custom kernel with flashfire?
Sent from my SM-G930T using XDA-Developers mobile app

xda23 said:
Can I flash a custom kernel with flashfire?
Click to expand...
Click to collapse
No you cannot. Or rather, science threw bootloader is still locked, your phone will not boot if you try.

KillerClaw321 said:
It appears you still have the eng kernal... You can just re-run the root.bat and install SuperSu, or if you want complete stock follow the steps below:
*Also Before you try this turn it off and let it charge for 45 min-1 hour or so...*
1. Volume Down + Power + Home to put it in download mode
2. Then press Volume Up to continue past the warning screen even if nothing is displayed.
3. Grab The Latest Version of Odin here
4. Then Download The Stock Firmware, in this case you will need whichever version you have (if you do not remember you can just download the latest available firmware) Download Firmware and then extract it. (If you have 5 different files in the zip go to step 8)
5. Then install Samsung device drivers(if not already).
6. Start Odin, Plug in the S7, Load in the tar.md5 in the AP/PDA and uncheck Auto Reboot and Repartition.
7. Let the phone restart... VIOLA!!!
8. Alternatively if the zip has 5 files... They should all start with the corresponding buttons in Odin For Example:
AP_G930TUVS3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
BL_G930TUVS3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930TUVS3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_TMB_G930TTMB3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_TMB_G930TTMB3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
After they are entered into Odin you hit start and after a few minutes ... It should be fixed....
Let me know if you have any further questions or issues...
Click to expand...
Click to collapse
New to samsung here, quick question. I soft bricked with an xposed app and have to restore.
What is the difference between the csc and the home csc files and which is the correct one. I don't see a home tab in odin
Sorry for the noob question, My first Samsung device

kc6wke said:
New to samsung here, quick question. I soft bricked with an xposed app and have to restore.
What is the difference between the csc and the home csc files and which is the correct one. I don't see a home tab in odin
Sorry for the noob question, My first Samsung device
Click to expand...
Click to collapse
You can just use CSC and not the CSC Home.

Quick question, I bought a used s7 edge off Craigslist and when it's asking me to log in with another guys email. I tried contacting the guy I bought it from but he hasn't texted me back yet. Can I root it and install another rom on it to bypass the lollipop lock? Thanks guys.

Palatis3 said:
Quick question, I bought a used s7 edge off Craigslist and when it's asking me to log in with another guys email. I tried contacting the guy I bought it from but he hasn't texted me back yet. Can I root it and install another rom on it to bypass the lollipop lock? Thanks guys.
Click to expand...
Click to collapse
I don't know if this will work, but try this:
---------- Post added at 02:09 AM ---------- Previous post was at 02:07 AM ----------
Palatis3 said:
Quick question, I bought a used s7 edge off Craigslist and when it's asking me to log in with another guys email. I tried contacting the guy I bought it from but he hasn't texted me back yet. Can I root it and install another rom on it to bypass the lollipop lock? Thanks guys.
Click to expand...
Click to collapse
Wait did you try rooting the s7 or s7 edge... (Or is the s7 edge completely unrelated to the brick)

How do I downgrade my device?

Hello,
I'm on Android 6.0.1 and using the custom ROM called ROMX. How do I downgrade my device because I'm having issues?
Thanks.
Sent from my E6653 using Tapatalk

EpicMedz said:
Hello,
I'm on Android 6.0.1 and using the custom ROM called ROMX. How do I downgrade my device because I'm having issues?
Thanks.
Click to expand...
Click to collapse
What are your problems on the ROMX and why aren't you posting about them in the ROMX thread? I've used the ROM aswell and rarely had issues on it.
I suggest you post your issues on the ROMX thread, and im sure you will get some help if someone (maybe myself) can help you with it.
If that won't be the case, ill help you to go back to stock or move to another ROM
Sent from my Sony Xperia Z5 using XDA Labs

koekoek91 said:
What are your problems on the ROMX and why aren't you posting about them in the ROMX thread? I've used the ROM aswell and rarely had issues on it.
I suggest you post your issues on the ROMX thread, and im sure you will get some help if someone (maybe myself) can help you with it.
If that won't be the case, ill help you to go back to stock or move to another ROM
Sent from my Sony Xperia Z5 using XDA Labs
Click to expand...
Click to collapse
I asked there a month ago and tried the solutions but the problems are continuing (WiFi drops and restarts every 5 to 10 mins). So I thought downgrading could maybe solve the problem.
Sent from my E6653 using Tapatalk

EpicMedz said:
I asked there a month ago and tried the solutions but the problems are continuing (WiFi drops and restarts every 5 to 10 mins). So I thought downgrading could maybe solve the problem.
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
Oh I see, sorry I missed your post there then (or I forgot about it).
Have you tried to clean flash the ROM again? What version of ROMX are you running?
All you have to do to go back to stock Sony ROM:
- Download flashtool and in flashtool go to Xperifirm and download the latest firmware for your device model.
- After downloading the firmware you want, you'll have to click the lightning button and chose flashmode.
- Select every box under wipe..
- Turn off your phone and plug it in your usb port on PC with USB cable while pressing volume DOWN button (green led should light up)
- Click flash to start the flashing process.
You can flash MarshMallow 5.11 firmware, or if you want the latest android version then download 32.3.A.2.33 Nougat firmware.
- Make sure to backup your files first before flashing anything.
If you need more help let us know

koekoek91 said:
Oh I see, sorry I missed your post there then (or I forgot about it).
Have you tried to clean flash the ROM again? What version of ROMX are you running?
All you have to do to go back to stock Sony ROM:
- Download flashtool and in flashtool go to Xperifirm and download the latest firmware for your device model.
- After downloading the firmware you want, you'll have to click the lightning button and chose flashmode.
- Select every box under wipe..
- Turn off your phone and plug it in your usb port on PC with USB cable while pressing volume DOWN button (green led should light up)
- Click flash to start the flashing process.
You can flash MarshMallow 5.11 firmware, or if you want the latest android version then download 32.3.A.2.33 Nougat firmware.
- Make sure to backup your files first before flashing anything.
If you need more help let us know
Click to expand...
Click to collapse
Thank you! Much easier than I thought ?
Sent from my E6653 using Tapatalk

koekoek91 said:
Oh I see, sorry I missed your post there then (or I forgot about it).
Have you tried to clean flash the ROM again? What version of ROMX are you running?
All you have to do to go back to stock Sony ROM:
- Download flashtool and in flashtool go to Xperifirm and download the latest firmware for your device model.
- After downloading the firmware you want, you'll have to click the lightning button and chose flashmode.
- Select every box under wipe..
- Turn off your phone and plug it in your usb port on PC with USB cable while pressing volume DOWN button (green led should light up)
- Click flash to start the flashing process.
You can flash MarshMallow 5.11 firmware, or if you want the latest android version then download 32.3.A.2.33 Nougat firmware.
- Make sure to backup your files first before flashing anything.
If you need more help let us know
Click to expand...
Click to collapse
I did all of this and downgraded to Lollipop and still same problems. Wiped again and upgraded to Nougat and still the same issues. Although I'm sending this from my phone, the random restarts still occur and the WiFi sometimes doesn't work and says 'Turning on' and the on switch is greyed out. Any help?

Have you tried wiping everything in flashtool even ssd and all, if yes then maybe your battery is damaged and phone has not enough power to work properly.

G930P Semi Bricked / Help

I have a Galaxy 7 G930P and i try to reset this phone for unlock a Google Account with Odin and other Boot Loader, but I bricked this phone and now only the phone restarts alone and does not turn up the system. I can put this phone in download mode and i need Help for Install all with the correct stock fimwares. Thanks and i hope fixed this...

billaboy said:
I have a Galaxy 7 G930P and i try to reset this phone for unlock a Google Account with Odin and other Boot Loader, but I bricked this phone and now only the phone restarts alone and does not turn up the system. I can put this phone in download mode and i need Help for Install all with the correct stock fimwares. Thanks and i hope fixed this...
Click to expand...
Click to collapse
Cannot help much if there is no details on what your phone bootloader/firmware versions were before flash, and what versions you were trying to flash.
If you were flashing a lower version of BL to your phone, you can flash your original firmware back to your phone.
If you were flashing a higher version of BL, you will need to find a new version of BL/firmware , such as the latest U firmware, to Odin into the phone..

billaboy said:
I have a Galaxy 7 G930P and i try to reset this phone for unlock a Google Account with Odin and other Boot Loader, but I bricked this phone and now only the phone restarts alone and does not turn up the system. I can put this phone in download mode and i need Help for Install all with the correct stock fimwares. Thanks and i hope fixed this...
Click to expand...
Click to collapse
yves31 said:
Cannot help much if there is no details on what your phone bootloader/firmware versions were before flash, and what versions you were trying to flash.
If you were flashing a lower version of BL to your phone, you can flash your original firmware back to your phone.
If you were flashing a higher version of BL, you will need to find a new version of BL/firmware , such as the latest U firmware, to Odin into the phone..
Click to expand...
Click to collapse
Read this thread
https://forum.xda-developers.com/sprint-galaxy-s7/help/bloat-free-firmware-930u-tried-t3428974
Since you mentioned a Google account, just make sure you know the user and password of the last working Google account on the phone. Sounds like you tried to flash a firmware with an older bootloader.
And if you don't know that info and were trying to carrier unlock it via some back door method, don't follow the thread that I just linked.

semi-bricked
this happened to me as well. dont have access to this device since november. flashing the phone with official samsung firmware doesnt seem to work either,cant boot into recovery

TormentedHeart said:
this happened to me as well. dont have access to this device since november. flashing the phone with official samsung firmware doesnt seem to work either,cant boot into recovery
Click to expand...
Click to collapse
Can you get into download mode? Power + home + volume down?

lvpre said:
Can you get into download mode? Power + home + volume down?
Click to expand...
Click to collapse
yes i can. flashing stock firmware doesnt seem to fix the probelm either

TormentedHeart said:
yes i can. flashing stock firmware doesnt seem to fix the probelm either
Click to expand...
Click to collapse
Do you receive an error message when flashing? Also, have you tried another USB cable and make sure you use an usb 2.0 port too.

lvpre said:
Do you receive an error message when flashing? Also, have you tried another USB cable and make sure you use an usb 2.0 port too.
Click to expand...
Click to collapse
no error message it flashes successfully with odin but when the phone itself starts to update the firmware after 33% it just reboots then fails. then i get a error screen and well no recovery. no one locally seemed to be able to fix the issue either so update: i sent it away to try to fix. https://imgur.com/a/knxKIKM