Database Info

[SGH-I337M] Lollipop Official Firmware + Modem - [MEGA]

Due to the high demand I am opening a thread with the stock firmware for the Canadian SGH-I337M with fast links from MEGA.
The firmware is multi-csc, so all Canadian carriers are supported.
Bell
I337MVLUGOC4 - 5.0.1 Lollipop - Click Here
Backup link thanks to nabbasi - Click Here
Rogers
I337MVLUGOC4 - 5.0.1 Lollipop - Click Here
Modem/Baseband
I337MVLUGOC4 - Modem - Click Here
To flash the firmware, extract the zip, and load the .md5 into the AP section of ODIN
Make sure only Auto Reboot and F. Reset Time is checked.
Put your phone into download mode (Press power+home+volume down) and click start in ODIN.
Once the flash is complete, hold volume up + home to boot into recovery. Select Wipe Data/Factory Reset and reboot.
To flash the modem only, load the .bin into the CP section of ODIN
Make sure only Auto Reboot and F. Reset Time is checked.
Put your phone into download mode (Press power+home+volume down) and click start in ODIN.
Phone will reboot and you are done.

If any one need backup link for stock rom for 5.0.1 (BMC) here it
https://mega.co.nz/#!2cN2RSZZ!V7O5uyA-q88dJtPmwstWarEIRCvr-SqIDEV_APaurQE

nabbasi said:
If any one need backup link for stock rom for 5.0.1 (BMC) here it
https://mega.co.nz/#!2cN2RSZZ!V7O5uyA-q88dJtPmwstWarEIRCvr-SqIDEV_APaurQE
Click to expand...
Click to collapse
Thanks, added to OP.

No worry man... actually I download wrong version I am waiting for rogers to release I think they might add support for Volte thats why it delay or I could be wrong....

nabbasi said:
No worry man... actually I download wrong version I am waiting for rogers to release I think they might add support for Volte thats why it delay or I could be wrong....
Click to expand...
Click to collapse
They are all the same.
By the way, the above Mega links don't work for me.
Edit: OP's link works with IE instead Chrome. Thank you!

Dude...
works in i337m telcel, Latin? only the signal... it works?

How does one update the bootloader using this firmware? I'm still on MDJ

stonecoldant said:
How does one update the bootloader using this firmware? I'm still on MDJ
Click to expand...
Click to collapse
If you want to update only the bootloader you can extract it from the firmware (Search the forums to find out how). Or you can just flash the full firmware package and it will update your entire phone including your bootloader. Alternatively, you can remove the bootloader from the firmware, and flash the new firmware while keeping your MDJ bootloader.

thanks for the quick reply, I flashed the firmware package once and it updated the ROM but not the baseband or bootloader for some strange reason. So I rebooted back in to download mode and flashed the package again and it did update that time. Interesting that it required two flashes to change both baseband and bootloader.

Has anyone tried the new OC4 radio with the MDJ/MG1 bootloader? And with KitKat?

Compatible with Mexico i337M
Hey, thanks for the MEGA link.
Apart from that I can confirm this rom is compatible with the Telcel i337M, mine is unlocked and I'm using it right now with Movistar and everything works, LTE and Wi-Fi. Word of advice, I had to flash it twice, the first one "Failed" the second one went through just fine.
Regards.

Thanks for the info about Telcel compatibility
EmmY2K said:
Hey, thanks for the MEGA link.
Apart from that I can confirm thi roms is compatible with the Telcel i337M, mine is unlocked and I'm using it right now with Movistar and everything works, LTE and Wi-Fi. Word of advice, I had to flash it twice, the first one "Failed" the second one went through just fine.
Regards.
Click to expand...
Click to collapse
Hey man, you just made my day.
I was wondering if this rom would work with the i337M.
Now I will download and flash for sure

Will this work with SGH-I337? Just want to make sure

ahmedbatty said:
Will this work with SGH-I337? Just want to make sure
Click to expand...
Click to collapse
No, SGH-I337M only.

So if I flash my I337M(Fido) with this rom in Odin to get stock Lollipop, then flash TWRP in Odin, then supersu.zip from TWRP recovery, will I have root?
Thanks

TRoN_1 said:
So if I flash my I337M(Fido) with this rom in Odin to get stock Lollipop, then flash TWRP in Odin, then supersu.zip from TWRP recovery, will I have root?
Thanks
Click to expand...
Click to collapse
Yes, you will have root with this method.

Just confirming that I also successfully installed the Rogers ROM on my Telcel SGH-I337m, right after Odin loaded the ROM, I pulled the battery out and back in, powered up the phone into download mode and loaded the latest Chainfire root and successfully rooted.

Missing Magazine
I have been playing with a lot of roms lately. I was looking for a TW Android 5. (Yes I like TW so Im weird). I found one that had the MAGAZINE feature. But sadly there was problems with the rom as it was not built for the Canadian Rogers i337m S4. This rom is a Android 5.0.1 but it seems to be missing the MAGAZINE and also shouldn't the Rogers version of this rom have ENGLISH (Canadian) support?
ADDED:
SO I see there is a ROGERS version of the rom out RWC-I337MVLUGOC4-2015041513.. Only there seems to be only two places to get this.. one from this crappy Rapid Gator site and this other German site both don't work and both want you to sign up for premium. Does anyone have this rom please.

sob2141 said:
I have been playing with a lot of roms lately. I was looking for a TW Android 5. (Yes I like TW so Im weird). I found one that had the MAGAZINE feature. But sadly there was problems with the rom as it was not built for the Canadian Rogers i337m S4. This rom is a Android 5.0.1 but it seems to be missing the MAGAZINE and also shouldn't the Rogers version of this rom have ENGLISH (Canadian) support?
ADDED:
SO I see there is a ROGERS version of the rom out RWC-I337MVLUGOC4-2015041513.. Only there seems to be only two places to get this.. one from this crappy Rapid Gator site and this other German site both don't work and both want you to sign up for premium. Does anyone have this rom please.
Click to expand...
Click to collapse
Added Link to OP for Rogers ROM.

sob2141 said:
I have been playing with a lot of roms lately. I was looking for a TW Android 5. (Yes I like TW so Im weird). I found one that had the MAGAZINE feature. But sadly there was problems with the rom as it was not built for the Canadian Rogers i337m S4. This rom is a Android 5.0.1 but it seems to be missing the MAGAZINE and also shouldn't the Rogers version of this rom have ENGLISH (Canadian) support?
ADDED:
SO I see there is a ROGERS version of the rom out RWC-I337MVLUGOC4-2015041513.. Only there seems to be only two places to get this.. one from this crappy Rapid Gator site and this other German site both don't work and both want you to sign up for premium. Does anyone have this rom please.
Click to expand...
Click to collapse
There is no different in rogers or bell stock rom. I have rogers s4 and using bell rom, only thing you have to do is change CSC after flashing the rom. you can use this code once you flash this rom use this on dialer *242*IMEI# than select what even you carrier you want to chose. after it will factory reset...

Soft bricked SPH-G925P

Sprint s6 edge it was boot looping only staying in Android for maybe 3-5 mins at a time. So i tried to flash it. I may have flashed 5.0.x to it. Now when I try to flash I can flash cm.bin, sboot and it always dies on boot.img. I really need some guidance on what i should try next.
Looking around shows boot.img not flashing is possibly the kernel but I am having trouble finding one that it will let me flash.

peterm20 said:
Sprint s6 edge it was boot looping only staying in Android for maybe 3-5 mins at a time. So i tried to flash it. I may have flashed 5.0.x to it. Now when I try to flash I can flash cm.bin, sboot and it always dies on boot.img. I really need some guidance on what i should try next.
Looking around shows boot.img not flashing is possibly the kernel but I am having trouble finding one that it will let me flash.
Click to expand...
Click to collapse
Were you originally on 5.1.1?
If so, are you having a hard time Odin-ing the stock rom?

Robbie Doo said:
Were you originally on 5.1.1?
If so, are you having a hard time Odin-ing the stock rom?
Click to expand...
Click to collapse
yes, it is a phone of a friend though I was trying to repair it. I downloaded the 5.1.1 from that slow sammoble site.

peterm20 said:
yes, it is a phone of a friend though I was trying to repair it. I downloaded the 5.1.1 from that slow sammoble site.
Click to expand...
Click to collapse
Since you were on 5.1.1 I don't think you would have any trouble Odining the stock ROM onto the phone. I've done it a few times and it worked OK. After you push the stock ROM you can root it if you want to.

Robbie Doo said:
Since you were on 5.1.1 I don't think you would have any trouble Odining the stock ROM onto the phone. I've done it a few times and it worked OK. After you push the stock ROM you can root it if you want to.
Click to expand...
Click to collapse
Well the problem is it won't flash past boot.img
As soon as boot.img is started it goes a green bar on Oden about 3/4 of the way and then goes FAILED! and oden disconnects the device.

peterm20 said:
Well the problem is it won't flash past boot.img
As soon as boot.img is started it goes a green bar on Oden about 3/4 of the way and then goes FAILED! and oden disconnects the device.
Click to expand...
Click to collapse
If you went from 5.1.1 to 5.0.X it's most likely hard bricked.

Soooperstar said:
If you went from 5.1.1 to 5.0.X it's most likely hard bricked.
Click to expand...
Click to collapse
Even if i can get in to download mode?

peterm20 said:
Even if i can get in to download mode?
Click to expand...
Click to collapse
Yea.... You have to stay within the same android version, ex. Any of the 5.1.1 updates. The firmware version that you're trying to restore with, is it OF7?

Soooperstar said:
Yea.... You have to stay within the same android version, ex. Any of the 5.1.1 updates. The firmware version that you're trying to restore with, is it OF7?
Click to expand...
Click to collapse
I think it is OF7.

peterm20 said:
I think it is OF7.
Click to expand...
Click to collapse
It should say it on the tar file. It's worth a try but you're probably dead. Here is the file if you need it but like I said, most likely you're done.
http://forum.xda-developers.com/showthread.php?t=3154757

peterm20 said:
Well the problem is it won't flash past boot.img
As soon as boot.img is started it goes a green bar on Oden about 3/4 of the way and then goes FAILED! and oden disconnects the device.
Click to expand...
Click to collapse
Which version of the Odin are you using?

Soooperstar said:
It should say it on the tar file. It's worth a try but you're probably dead. Here is the file if you need it but like I said, most likely you're done.
http://forum.xda-developers.com/showthread.php?t=3154757
Click to expand...
Click to collapse
It worked for me. I have a friend who did the same thing and thought the phone was a gonner. I told her I'd give it a try and I was able to Odin (v.3.10.6) to OF7, took the OTA to OH1 and flashed Wicked One SS v.3.0 from @dazednconfused and she says it's running perfect.
Also, @Soooperstar Odin file here.

JediMindTrixx said:
It worked for me. I have a friend who did the same thing and thought the phone was a gonner. I told her I'd give it a try and I was able to Odin (v.3.10.6) to OF7, took the OTA to OH1 and flashed Wicked One SS v.3.0 from @dazednconfused and she says it's running perfect.
Also, @Soooperstar Odin file here.
Click to expand...
Click to collapse
Your friend went from 5.1.1 to 5.0.X? That's the link I just gave him

Yes she did. Sorry about that, saw that afterwards.
Sent from a Galaxy S6 Edge... Far, Far, Away...

JediMindTrixx said:
Yes she did. Sorry about that, saw that afterwards.
Sent from a Galaxy S6 Edge... Far, Far, Away...
Click to expand...
Click to collapse
Interesting

Robbie Doo said:
Which version of the Odin are you using?
Click to expand...
Click to collapse
the latest one. I've seen various other flashing posts saying you should use a slightly older Oden.
Also side rant. I did a chat with samsung support and they said the Smart Switch recovery doesn't work with the S6? I cannot get it to verify the serial number of my phone (s6) and the broken one (s6 e)

peterm20 said:
the latest one. I've seen various other flashing posts saying you should use a slightly older Oden.
Also side rant. I did a chat with samsung support and they said the Smart Switch recovery doesn't work with the S6? I cannot get it to verify the serial number of my phone (s6) and the broken one (s6 e)
Click to expand...
Click to collapse
3.10.6 is what I use

peterm20 said:
the latest one. I've seen various other flashing posts saying you should use a slightly older Oden.
Also side rant. I did a chat with samsung support and they said the Smart Switch recovery doesn't work with the S6? I cannot get it to verify the serial number of my phone (s6) and the broken one (s6 e)
Click to expand...
Click to collapse
I'm not sure which version you are referring to as the latest one, but the only version that will work with what you're trying to accomplish is 3.10.6

Soooperstar said:
It should say it on the tar file. It's worth a try but you're probably dead. Here is the file if you need it but like I said, most likely you're done.
http://forum.xda-developers.com/showthread.php?t=3154757
Click to expand...
Click to collapse
Well your file got me way further than I've got before. I can get it to write the system.img in "BL" but if i use AP it fails about 1/2 the way through

peterm20 said:
Well your file got me way further than I've got before. I can get it to write the system.img in "BL" but if i use AP it fails about 1/2 the way through
Click to expand...
Click to collapse
Like I said from my knowledge, you should be hard bricked, but if someone else went from 5.1.1 to 5.0.X and back, you might want to find out what they did. Don't think it's possible

custom binary blocked by frp lock

Got myself in a bind. Bought a new Note 5 today to upgrade to 64GB. Forgot to OEM unlock, and the phone is bricked for the moment. The new image N920TUVU3DPG1 isn't available to download yet. Any suggestions, or does anyone know where the new image can be found yet? What a rookie mistake! Smart Switch in emergency recovery tries to flash N920TUVU2DPD1 and fails. Downgrading doesn't work either.

same here. where can we get it from?

rmarinella said:
Got myself in a bind. Bought a new Note 5 today to upgrade to 64GB. Forgot to OEM unlock, and the phone is bricked for the moment. The new image N920TUVU3DPG1 isn't available to download yet. Any suggestions, or does anyone know where the new image can be found yet? What a rookie mistake! Smart Switch in emergency recovery tries to flash N920TUVU2DPD1 and fails. Downgrading doesn't work either.
Click to expand...
Click to collapse
Just downgrade to an older version via Odin if possible. It can be done on Verizon so I don't see why not on yours.

MrMike2182 said:
Just downgrade to an older version via Odin if possible. It can be done on Verizon so I don't see why not on yours.
Click to expand...
Click to collapse
I tried the previous version while in download mode using Odin. Loaded the stock rom in the AP slot and started it then it failed pretty quick. The com shows connected before I hit start but it still fails.

mistaedster said:
I tried the previous version while in download mode using Odin. Loaded the stock rom in the AP slot and started it then it failed pretty quick. The com shows connected before I hit start but it still fails.
Click to expand...
Click to collapse
You have to make sure you have the correct firmware! You should be able to see which one is already on the phone while in recovery mode.

MrMike2182 said:
You have to make sure you have the correct firmware! You should be able to see which one is already on the phone while in recovery mode.
Click to expand...
Click to collapse
That's the problem. I can't find the right firmware

mistaedster said:
That's the problem. I can't find the right firmware
Click to expand...
Click to collapse
I think we're stuck with a very expensive paperweight until Samsung releases full firmware for the N920TUVU3DPG1 update.

rmarinella said:
I think we're stuck with a very expensive paperweight until Samsung releases full firmware for the N920TUVU3DPG1 update.
Click to expand...
Click to collapse
I actually got darthstalker rom working on mine then moved to sick ass rom. I flashed the stock deodexed kernel from original android development then the rom via twrp

mistaedster said:
I actually got darthstalker rom working on mine then moved to sick ass rom. I flashed the stock deodexed kernel from original android development then the rom via twrp
Click to expand...
Click to collapse
Stock Kernel from where?

rmarinella said:
Stock Kernel from where?
Click to expand...
Click to collapse
http://forum.xda-developers.com/tmo...ernel-stock-modified-kernel-touchwiz-t3194148

mistaedster said:
http://forum.xda-developers.com/tmo...ernel-stock-modified-kernel-touchwiz-t3194148
Click to expand...
Click to collapse
OK, thanks. Looks like we aren't in the same situation though. I can't get into, or flash TWRP.

Stock N920TUVU3DPG1 Firmware now available here: https://www.androidfilehost.com/?fid=24588232905721433

rmarinella said:
Stock N920TUVU3DPG1 Firmware now available here: https://www.androidfilehost.com/?fid=24588232905721433
Click to expand...
Click to collapse
Hope u fixed ur problem, I'm still on Note 4, was waiting for u to fix the new firmware for us last month, and now we just got another one, so shocked Samsung is actually taking care of the Note 4 N910T,
My rom boots up, but can't see sim card, external storage, wifi doesn't connect and so forth, I guess they did something with the new MM that @dsixda kitchen doesn't work correctly somewhere anymore,
need to learn Ubuntu, not easy with no help,,, I made an external drive with 16.04 but need to java development and figure the rest out, not easy with 2 kids.. and wifey..
and u r also in FL, by the way thanks for the updater script for the past v5.1.1 roms we had...
Samsung keeps raising prices on these phones, ridiculous no reason the new Note 7 will be $849 cause they r only making egde style phones.
I'm glad they pushed me to my limits, first it was HTC, I had all the HTC phone till M7, for when they had the first tmobile dash windows phone.. haha..
don't know whats next, maybe crapple... no rush since the note 4 is still rocking good,
but the Note 7, water resistence is awesome is the only kool thing I guess.

Seems like I'm having the same problem frp lock and drk has anyone found a solution yet. I can't seem to find any way to fix this yet. Appreciate any help in advance

I could help with this issue, just let me know if you need my assistant I would have to remotely do this to accomplish this thanks..

[How-To] Flash AT&T Nougat to T-Mobile S7

Hey everyone,
Here is a guide to flash AT&T Nougat to our T-Mobile S7. For convenience I have uploaded everything needed to google drive.
So far the only thing I have found that isn't working is Wi-Fi Calling.
1) Download everything from this Google Drive folder:
https://drive.google.com/drive/folders/0B6HE3dipVfjZOVRMcWd1S3IzOVE?usp=sharing
2) Copy the "update.zip" to your SD card. If you don't have an SD Card, you may need to copy it to your phone after step (4)
3) Put your phone into Download mode
4) Flash the PK1 files in Odin (AP, CSC, BL, and CP)
5) Once your phone restarts to the setup screen (could take 10-15 minutes) restart back into Recovery mode. No need to do any setup here
6) Flash update from SD Card and select "update.zip". This step can take over 30 minutes.
7) Once you have gone through the initial setup, you need to fix the APN settings.
a) Go to Settings - Connections - Mobile Network - Access Point Names
b) Click Add
c) Fill in these APN Settings
Name: T-Mobile US LTE
APN - fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
APN type: default,mms,supl
d) Click the 3dots menu - Save
e) Click on the newly created menu
f) Now your LTE data should work
And Voila! You now have a working final version of Nougat. You can disable almost everything that AT&T puts on there.
EDIT: I've updated the Google Drive link with a compressed file containing all the needed AT&T files.
If this works for you please go to the following post and thank the OP. Without his instructions, I would have not been able to do this.
https://forum.xda-developers.com/at...to-update-galaxy-s7-edge-firmware-to-t3541296

Are there any connection drops: Bluetooth, Wi-Fi, or cellular drop? Is the signal good where it is supposed to be good?

Illyakulinych said:
Are there any connection drops: Bluetooth, Wi-Fi, or cellular drop? Is the signal good where it is supposed to be good?
Click to expand...
Click to collapse
No, I haven't had any connection drops. I only flashed it last night, I will definitely keep everyone here updated. Cell signal is just as good as the latest tmobile features.
Also, I realized I posted this in the Q&A section. Any chance an admin could move it to the Guide section

plz compress it and upload again impossible to download

popmpopm said:
plz compress it and upload again impossible to download
Click to expand...
Click to collapse
Sorry about that. Reuploading now. The same link should work and it will be ready in about 20 minutes. I'll edit this post when it is uploaded.

Is there any difference between verizon nougat and at&t nougat ?
I mean i am using verizon nougat on my s7 tmobile but I experience issues with cellular network alot.
Could someone guide me please?

Owi93 said:
Is there any difference between verizon nougat and at&t nougat ?
I mean i am using verizon nougat on my s7 tmobile but I experience issues with cellular network alot.
Could someone guide me please?
Click to expand...
Click to collapse
The main differences I found between the Version nougat I was using and this version is that the latest Verizon version I could find was still just a beta. This is what seems to be a fully finished version of nougat. As I said, I have only had this for 1 day on my phone, but so far I have had absolutely no issues. The Verizon version gave me battery life issues, it caused my phone to overheat quite often, this version has none of those problems.

r3xx3r said:
The main differences I found between the Version nougat I was using and this version is that the latest Verizon version I could find was still just a beta. This is what seems to be a fully finished version of nougat. As I said, I have only had this for 1 day on my phone, but so far I have had absolutely no issues. The Verizon version gave me battery life issues, it caused my phone to overheat quite often, this version has none of those problems.
Click to expand...
Click to collapse
I see.
So No mobile data issues you mean ?

Owi93 said:
I see.
So No mobile data issues you mean ?
Click to expand...
Click to collapse
exactly. I have not had any mobile data issues yet. Battery life so far is amazing. Performance is awesome.

r3xx3r said:
exactly. I have not had any mobile data issues yet. Battery life so far is amazing. Performance is awesome.
Click to expand...
Click to collapse
Thanks for the help man.
I will try this today.
Will I have to go back to the tmobile stock firmware first ? To flash the at&t firmware?

Owi93 said:
Thanks for the help man.
I will try this today.
Will I have to go back to the tmobile stock firmware first ? To flash the at&t firmware?
Click to expand...
Click to collapse
I was on stock t-mobile firmware, but I don't see why you would need to be too flash this.

thanks for y hard work
Are the French language in this rom

r3xx3r said:
I was on sick tmobile firmware, but I don't see why you would need to be too flash this.
Click to expand...
Click to collapse
I don't know bro.
I am new to this game.
I just don't want something bad to happen

popmpopm said:
thanks for y hard work
Are the French language in this rom
Click to expand...
Click to collapse
Yes they are

Owi93 said:
I don't know bro.
I am new to this game.
I just don't want something bad to happen
Click to expand...
Click to collapse
Than flash back to stock firmware.

r3xx3r said:
I was on sick tmobile firmware, but I don't see why you would need to be too flash this.
Click to expand...
Click to collapse
if you know 930U MM rom are great too ( yes 930t is really very bad rom ) am uncertain to change it

can someone confirm that VoLTE works?

Just flashed this. So far so good. Will reply later tomorrow to let people know if I find anything not working

Quick question the, the files I downloaded is a pk1 is that that actual Update file? Or is that the odin files to flash threw odin? Then the update file should be there to do a recovery flash Update?
I'm already on pk1 but the mobile and it didn't flash threw recovery. I thought I'd just have to flash it over this but not being on att started to figure that I need to be on att pk1.
Thanks in advance

dandel0074 said:
Quick question the, the files I downloaded is a pk1 is that that actual Update file? Or is that the odin files to flash threw odin? Then the update file should be there to do a recovery flash Update?
I'm already on pk1 but the mobile and it didn't flash threw recovery. I thought I'd just have to flash it over this but not being on att started to figure that I need to be on att pk1.
Thanks in advance
Click to expand...
Click to collapse
Okay, so there are 5 files in the archive. 4 of them end in .tar.md5 and those are the AT&T PK1. You need to flash those files through Odin, than flash the update.zip through the phones recovery mode. You need to be on the AT&T PK1 before you can flash the update.zip through the recovery. Flashing the update.zip while on the T-Mobile PK1 will fail.

Please help me!!! I'm in need of assistance

I just bought a galaxy s8 plus phone. The Wi-Fi keeps saying turning on, but doesn't actually turn on. It's not my router because I can get my galaxy s7 phone to connect no issue. It's a Samsung G955U and 7.0
Any thoughts?

You can try a factor y reset and or stock firmware
Reinstall. Sometimes stock can be broken as well.

TheMadScientist said:
You can try a factor y reset and or stock firmware
Reinstall. Sometimes stock can be broken as well.
Click to expand...
Click to collapse
Could you guide me to a thread where I can do that? I know I'll need to reinstall Odin and flash everything

vrahn said:
Could you guide me to a thread where I can do that? I know I'll need to reinstall Odin and flash everything
Click to expand...
Click to collapse
First you need your firmware. Which can be found in about phone and baseband.
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950U/
This is for the U or snapdragon. If yours is differ click firmwares and type in your model select your carriers firmware from the list

TheMadScientist said:
First you need your firmware. Which can be found in about phone and baseband.
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950U/
This is for the U or snapdragon. If yours is differ click firmwares and type in your model select your carriers firmware from the list
Click to expand...
Click to collapse
Mine is Verizon. SnapDragonG955U. I found the firmware for my phone. Can you direct me to the thread where I can flash the firmware for this phone? Ive found a thread for rooting that is part cyborg. It looks like I can use that to root the phone. But I need to reflash the stock firmware first.
https://forum.xda-developers.com/ga...root-partcyborgrom-aqk3-samfail-odin-t3717702

vrahn said:
Mine is Verizon. SnapDragonG955U. I found the firmware for my phone. Can you direct me to the thread where I can flash the firmware for this phone? Ive found a thread for rooting that is part cyborg. It looks like I can use that to root the phone. But I need to reflash the stock firmware first.
https://forum.xda-developers.com/ga...root-partcyborgrom-aqk3-samfail-odin-t3717702
Click to expand...
Click to collapse
You should be able to just flash this out of the gate

TheMadScientist said:
You should be able to just flash this out of the gate
Click to expand...
Click to collapse
I have the stock firmware. But im unsure of which CSC to use. Here is what I have.
AP_G955USQU2BQK5_CL12523989_QB15659348_REV00_user_low_ship_MULTI_CERT_meta.tar.md5.md5
BL_G955USQU2BQK5_CL12523989_QB15659348_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_G955USQU2BQK5_CP8026183_CL12523989_QB15659348_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_OYN_G955UOYN2BQK5_CL12523989_QB15659348_REV00_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYN_G955UOYN2BQK5_CL12523989_QB15659348_REV00_user_low_ship_MULTI_CERT.tar.md5
USERDATA_USC_G955USQU2BQK5_CL12523989_QB15659348_REV00_user_low_ship_MULTI_CERT.tar.md5
Also, which order do I flash them?

You put ap bl and co in respective slots in Odin. And I use the home csc in csc slot. Flash all together
You won't use the user data

TheMadScientist said:
You put ap bl and co in respective slots in Odin. And I use the home csc in csc slot. Flash all together
You won't use the user data
Click to expand...
Click to collapse
So I tried this and wifi still isnt turning on. Am I missing something?

If software didn't fix. Then it's a hardware issue. But In my life I've seen out like 5 times or so

TheMadScientist said:
You can try a factor y reset and or stock firmware
Reinstall. Sometimes stock can be broken as well.
Click to expand...
Click to collapse
So what can I do about it

vrahn said:
So what can I do about it
Click to expand...
Click to collapse
Only other thing I know to do is try a couple firmwares and maybe one of the combo files around. If none of that works then a ram with Sammy may be the only option. As this is about everything you can try on your end.
Unless some one else wants to chime in with something I didn't think of.
Ps I had this happen on my LG g3. Camera could not connect. Flash many roms. Flash this that. Nothing. And all because they used apparently the same base I had. I bricked. Or something downloaded a new firmware from a new site and flashed and bam. No camera issue from there on out