Okay so firstly, i am not a noob, i have recovered from numerous hard bricks up until now.
But this kind of thing has happened to me for the first time ever.
I accidentally flashed a wrong firmware on my TCL M3G 3S from qfil.
after the flashing process, the phone was not booting into system, no recovery, no fastboot, no emergency download mode, no vibrations. Just the LED lights up when i connect to a charger or my PC.
My PC is not detecting my device as Qualcomm HS-USB port 9008. It instead shows up in the Human Interface Devices section as USB Input Device and HID compliant vendor defined device.
If i use the usb cable that came with my phone, it shows up as Unknown USB device driver descriptor request failed.
I can easily recover my phone if it just shows in any form og qualcomm device.
I have seen some tutorials of other similar hardware phones being hard bricked that showed up as port 9008 by connecting to points on the motherboard with a copper wire. But i dont want to try this because my phone is still under warranty.
Are there any other ways of trying to resurrect my device before i give up and give it in a service centre for repair??
Please Help. I will provide any details you need.
Thank You.
iball user said:
Okay so firstly, i am not a noob, i have recovered from numerous hard bricks up until now.
But this kind of thing has happened to me for the first time ever.
I accidentally flashed a wrong firmware on my TCL M3G 3S from qfil.
after the flashing process, the phone was not booting into system, no recovery, no fastboot, no emergency download mode, no vibrations. Just the LED lights up when i connect to a charger or my PC.
My PC is not detecting my device as Qualcomm HS-USB port 9008. It instead shows up in the Human Interface Devices section as USB Input Device and HID compliant vendor defined device.
If i use the usb cable that came with my phone, it shows up as Unknown USB device driver descriptor request failed.
I can easily recover my phone if it just shows in any form og qualcomm device.
I have seen some tutorials of other similar hardware phones being hard bricked that showed up as port 9008 by connecting to points on the motherboard with a copper wire. But i dont want to try this because my phone is still under warranty.
Are there any other ways of trying to resurrect my device before i give up and give it in a service centre for repair??
Please Help. I will provide any details you need.
Thank You.
Click to expand...
Click to collapse
Hello and welcome to xda-assist,
we actually don't do technical support, we're here to guide you to the most suitable board on xda, unfortunately the phone you're using has no specific device Forum, so I can only suggest you to visit the general help section..
http://forum.xda-developers.com/android/help
Good luck
Related
Hi all, I'm new here and i have a malfunctioned phone so thought I'd give this a shot and learn some stuff from you guys..
I have a bricked galaxy s3 which cant get into download mode. Computer detects it as Qualcomm HS-USB QDloader 9008 in device manager and QPST software sees it in download mode via the same COM port.
Now I want to know... is there any luck is this phone completely dead? and what if i send it back for repair (i took it for JTAG and i was told the chip that boots the phone is burnt out when flashing a corrupted rom)
If you have any info or experience regarding this your help is much needed and appreciated.
4tunecookie said:
Hi all, I'm new here and i have a malfunctioned phone so thought I'd give this a shot and learn some stuff from you guys..
I have a bricked galaxy s3 which cant get into download mode. Computer detects it as Qualcomm HS-USB QDloader 9008 in device manager and QPST software sees it in download mode via the same COM port.
Now I want to know... is there any luck is this phone completely dead? and what if i send it back for repair (i took it for JTAG and i was told the chip that boots the phone is burnt out when flashing a corrupted rom)
If you have any info or experience regarding this your help is much needed and appreciated.
Click to expand...
Click to collapse
It is hard bricked my friend a lot of us have suffered this also, JTAG or maybe warranty is your only option.
Hello guys,
My Nexus 5 (D820 32gb) wont turn on, after flash a false (I believe) file in TWRP, when i press more than 10 sec or less nothing appear on the screen (he was off) he was recognize by my PC sush as QHSUSB Bulk (I have a driver for Find 7 but I believe that is not 100% compatible, when I install the driver "QHSUSB Bulk" is converted into "Qualcomm HS-USB QDLoader 9008 (COM16)") when I press on power+up+down, when I press on nothing my pc recognize my phone sush as "LGE AndroidNet USB Serial Port (COM15)".
On LGNPST a UNKNOWN model was recognize when my phone is on "LGE AndroidNet USB Serial Port" but I don't have any dll and bin file for "emergency" the phone (D820 32gb), I think LGNPST is the only software to recover my phone.
Please help me.
Thanks
TheQuentincc said:
"Qualcomm HS-USB QDLoader 9008 (COM16)"
Click to expand...
Click to collapse
Once this state is achieved on a Nexus 5, there is nothing we can do about it yet, only LG or other professionals can repair it. Even so, in most cases LG does not bother to repair it and simply does a motherboard swap.
Sorry, but you'll have to send it in for repair/replacement.
Lethargy said:
Once this state is achieved on a Nexus 5, there is nothing we can do about it yet, only LG or other professionals can repair it. Even so, in most cases LG does not bother to repair it and simply does a motherboard swap.
Sorry, but you'll have to send it in for repair/replacement.
Click to expand...
Click to collapse
F***, it is no longer recognized by the pc (fail when flash with LGNPST), so for next guys who read the topic I think this program can restore a hard brick from nexus 5 : http://forum.xda-developers.com/attachment.php?attachmentid=3007071&d=1415553921
TheQuentincc said:
F***, it is no longer recognized by the pc (fail when flash with LGNPST), so for next guys who read the topic I think this program can restore a hard brick from nexus 5 : http://forum.xda-developers.com/attachment.php?attachmentid=3007071&d=1415553921
Click to expand...
Click to collapse
Nobody here has ever successfully unbricked a Nexus 5 after it has been to 9008. Attempts have only resulted in being completely dead or a unrecognized device.
I'm having a huge problem. My phone is ZTE BLADE Q Maxi and it's bricked. In order to unbrick it, I need to connect it to my PC/Laptop.
But whenever I try, my phone keeps getting disconnect (I get the beeps for connecting and disconnecting). The drivers I have installed are: ADB Interface, DA USB VCOM Port, Gadget Serial, PreLoader USB VCOM port and others (that I belive they have no influence in this).
Any help would be greatly appreciated!
Anony39 said:
I'm having a huge problem. My phone is ZTE BLADE Q Maxi and it's bricked. In order to unbrick it, I need to connect it to my PC/Laptop.
But whenever I try, my phone keeps getting disconnect (I get the beeps for connecting and disconnecting). The drivers I have installed are: ADB Interface, DA USB VCOM Port, Gadget Serial, PreLoader USB VCOM port and others (that I belive they have no influence in this).
Any help would be greatly appreciated!
Click to expand...
Click to collapse
Hello,
I guess your USB cable is at fault.
-Vatsal
Vatsal said:
Hello,
I guess your USB cable is at fault.
-Vatsal
Click to expand...
Click to collapse
Forgot to mention that I've also tried with my USB cable from LG, and still got the same problem.
Anony39 said:
Forgot to mention that I've also tried with my USB cable from LG, and still got the same problem.
Click to expand...
Click to collapse
Hello,
Try posting your query here Ask any Q Noobfriendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
i tryed some tutorial where is guy give me img files which I pushed (by my mistake) install with "DiskImageRev2" (it is alot solutions no one can know what is best solution for those phones...)... display on my phone don't poweing on, i have installed only devices RELINK HS-USB QDLoader 9008 (on some port)
bifore i have made any kind of changes i had problem with "Security boot error" with pink screen and m not have USB Debugging enabled in phone couse is alrdy been down and m been unable to enable usb debugging....
did have any kind of repair excluding flash box?
sorry for my bad english..
Try this first
In the following thread, you can see my post as a reply. Refer to that and see whether you can fix your phone. You'll need your data cable came with your phone..
https://forum.xda-developers.com/android/help/help-bootloop-lg-l70-d320-t3304382#post70962321
I'm wondering if anyone has a Nexus 5 D821 motherboard in working condition that they would like to get rid of. Or if anyone knows of a way to get into Qualcomm 9008 mode from LGE Android Platform USB Serial Port. The phone seems dead, doesnt react to button presses, Vol Up+Vol Down+ Power doesnt change anything, the phone restarts back into LGE Android Platform USB Serial Port mode. No download mode. From what I know my EMMC wasn't dead (passed all the Board Diag Tests). Phone died after I flashed SBL1 with boarddiag (Even though I was told not to...)
There is a guide in general forums.
wangdaning said:
There is a guide in general forums.
Click to expand...
Click to collapse
Any links? From what i know i have tried all of them (LG flash tool, Board diag) I just cant get the phone to show up as anything other than the LGE Android Platform USB Serial Port
Excudent said:
Any links? From what i know i have tried all of them (LG flash tool, Board diag) I just cant get the phone to show up as anything other than the LGE Android Platform USB Serial Port
Click to expand...
Click to collapse
I hard bricked my phone yesterday and was stressing out quite a bit! Luckily I found this guide: http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Note: I assume that you know what you are doing. Since you know about Qualcomm HS-USB QDLoader 9008 mode, you probably do, but you can do some serious harm with this mode.
Essentially, the gist of the guide comes down to installing the qualcomm drivers so that the phone becomes detected as a Qualcomm HS-USB QDLoader 9008. After this, you can use Boarddiag as you are used to to reflash the partitions. Note that for me, the phone was not in sahara dload mode and Boarddiag would not work. What I had to do was the following (these steps are done after the drivers are properly installed)
Unplug the Nexus 5 from your computer
Open the back cover and remove the 6 top screws holding the other protective cover
Disconnect the battery cable for 5 seconds. Reconnect it after
While holding the volume up and down button, plug it into your computer. It should now be in Sahara download mode and Boarddiag should work.
Let me know how everything goes!