This is a stock kernel for the Xperia C3 D2533 and D2502 running stock 5.1.1 firmware.
I am learning from scratch in my free time so updates will be very slow or non-existent, please bear with me until then. Right now I only have a kernel image which must be flashed through ADB (you need to look up in the forums here to install it), nothing else is needed.
Make sure your phone's bootloader is unlocked and has a working recovery, use this guide to do it if you haven't done so.
Basic requirements:
Phone is rooted and bootloader unlocked
You have a working recovery for your device
You know how to backup and flash images/kernels with TWRP
ADB and Fastboot works perfectly in your computer and phone
You know how to use ADB and Fastboot, otherwise Google it
Install instructions
Just flash the zip file through TWRP, it will take a minute or two to finish up. If you're using Magisk, you need to reflash the Magisk zip to patch the new kernel.
Download link
Manjuu Kernel v5
Changelog:
V5
- Remove Linux patch (It was the wrong way to patch this kernel and will cause conflicts)
- Revert commits from another kernel (also caused some conflicts and increased battery drain)
- Added SafetyNet patch
- This is not tested. Please flash UnSU, the kernel, then Magisk. Right now Magisk v12 will result in high CPU usage, use v11.6 instead. You will trip SafetyNet if you have Xposed or SuperSU in your device.
Older changelogs:
V4
- Downgrade Intelliplug to 4.0 for better compatibility
- Cleaned up some coding
- Merge some bugfix and improvements (Refer to github commits)
- Now that we have a flashable zip, driver modules are added as well
V3
- Update Intelliplug to 5.0
- Added overclock to 1600Mhz
- Some compilation optimizations
- General kernel bugfix (refer to github commit)
- Update linux kernel to 3.4.5
V2
- Added Intelliplug hotplug
- Added KCAL support (get control app from here)
V1
- First build with Linaro GCC toolchain
Credits List
bauner and his guidance in building kernels
osmosis for his Anykernel2 and AIK
riccorbypro for his help in bringing development
XDA for providing a platform to contribute and share everything Android
And a special no thank you to Sony for being such a potato. The only difference is a potato is a lot more useful than Sony when it comes to customer service.
XDA:DevDB Information
Manjuu Kernel, Kernel for the Sony Xperia C
Contributors
AutumQueen92
Source Code: https://github.com/AngryManjuu/ManjuuKernel
Kernel Special Features: Compiled with Cortex-A7 optimised toolchain
Version Information
Status: Stable
Current Stable Version: 5.0
Stable Release Date: 2017-04-13
Created 2017-02-27
Last Updated 2017-05-13
Reserved
Great dev , can i use this on D2502 ?
Seem no one use C3 anymore ?!
JustinSang said:
Great dev , can i use this on D2502 ?
Seem no one use C3 anymore ?!
Click to expand...
Click to collapse
Make a backup of your boot.img with TWRP, copy the backup file also into your PC then try flashing it. This might break recovery so be prepared to reflash them if it won't boot. Let me know if it succeeds/fails.
Nobody has yet to tell me about D2502 so this could be a chance to test it out, thanks.
AutumQueen92 said:
Make a backup of your boot.img with TWRP, copy the backup file also into your PC then try flashing it. This might break recovery so be prepared to reflash them if it won't boot. Let me know if it succeeds/fails.
Nobody has yet to tell me about D2502 so this could be a chance to test it out, thanks.
Click to expand...
Click to collapse
work g8t in c3 dual d2502:good::highfive: m used
also xperia m2 xperianze z2 rom work in c3:laugh::good:
monu09 said:
work g8t in c3 dual d2502:good::highfive: m used
also xperia m2 xperianze z2 rom work in c3:laugh::good:
Click to expand...
Click to collapse
So Dual Sim functions are all okay, including data?
AutumQueen92 said:
So Dual Sim functions are all okay, including data?
Click to expand...
Click to collapse
yes work
thkss it work fine
Kernel update to V3, if anyone is still using this thing >.>
What is the benefit to my c3 if I flash the kernel? I'm just wondering.
7thzign said:
What is the benefit to my c3 if I flash the kernel? I'm just wondering.
Click to expand...
Click to collapse
Basically better performance, and better battery life. It also fixes a few bugs here and there, so hopefully it's also more stable.
Thanks for update
error: cannot load 'Manjuu'
chetan3138 said:
error: cannot load 'Manjuu'
Click to expand...
Click to collapse
Be more specific. How did you try to flash it?
AutumQueen92 said:
Be more specific. How did you try to flash it?
Click to expand...
Click to collapse
through command window
chetan3138 said:
through command window
Click to expand...
Click to collapse
Weird, it should work. Try renaming the file to kernel.img and the change the name in the command line as well.
When you installed the fastboot drivers, did you disable signature verification in windows first? If not, google how to do it then reinstall drivers and reboot.
If it's still not working try using TWRP instead.
chetan3138 said:
error: cannot load 'Manjuu'
Click to expand...
Click to collapse
Try renaming the file then flash as what autumnqueen said. Thats also my problem at first but when i renamed the file. It fixes the error.
AutumQueen92 said:
Weird, it should work. Try renaming the file to kernel.img and the change the name in the command line as well.
When you installed the fastboot drivers, did you disable signature verification in windows first? If not, google how to do it then reinstall drivers and reboot.
If it's still not working try using TWRP instead.
Click to expand...
Click to collapse
Adb doesnt read spaces. Worked after rename and go bootlooped for odexed one.
chetan3138 said:
Adb doesnt read spaces. Worked after rename and go bootlooped for odexed one.
Click to expand...
Click to collapse
Alright, renamed it already. Btw, what odexed?
This should work on stock rom and the deodex patch as well. Is your phone's bootloader unlocked?
AutumQueen92 said:
Alright, renamed it already. Btw, what odexed?
This should work on stock rom and the deodex patch as well. Is your phone's bootloader unlocked?
Click to expand...
Click to collapse
Yeah, unlocked. Btw I have tried it on c3 dual sim. I think its for lte version only
monu09 said:
work g8t in c3 dual d2502:good::highfive: m used
also xperia m2 xperianze z2 rom work in c3:laugh::good:
Click to expand...
Click to collapse
Hi, well thats grt that this kernel works fine. But you mentioned about some rom(Xperia m2 Xperianze z2 rom) working in xperia c3 with this kernel. Can u please give the link to it. Xperia c3 dual do not have any custom rom till date. If the rom given by you works then you will be a God to al the xperia c3 users. I tried to search the rom u mentioned but I found nothing.
Thanks
Related
THIS SOFTWARE NEEDS UNLOCKED BOOTLODER
http://unlockbootloader.sonymobile.com/
Kernel for 18.3.B.0.31(4.4.2) & 18.3.1.B.0.18(4.4.4) fimware with CWM & Ric is diasbled for full root.
Flashing instructions:
*** Download the file & renamed it to boot.img
put the boot.img file in fastboot directory.
Turn OFF your M2 dual and plug in via USB with VOL+ key pressed. Blue LED should blink.
Open terminal/CMD, go to to dir with boot.img and type:
fastboot flash boot boot.img
Click to expand...
Click to collapse
OR
Flash with Flastool
Download New l 18.3.1.B.0.18 Kernel:
Click Here
DOWNLOAD .31 Kernel
How to Root
Install Kernel with CWM above.
download the latest SuperSU update.zip from: http://download.chainfire.eu/supersu and save on your SD card
reboot into recovery and flash the supersu package.
reboot your device
Credits for kernel: freack_v
Original kernelthread
Can you make it for Xperia M2 D2306 please? We need at least a working CWM so we can test and help any developer to test ROM and mods. I can try to help providing files. Thanks in advance.
macabrocabral said:
Can you make it for Xperia M2 D2306 please? We need at least a working CWM so we can test and help any developer to test ROM and mods. I can try to help providing files. Thanks in advance.
Click to expand...
Click to collapse
Sorry mate. i've d2302 & i can only support that. i can only help in those things which are common i both devices.
nilimahona said:
THIS SOFTWARE NEEDS UNLOCKED BOOTLODER
http://unlockbootloader.sonymobile.com/
This is from Stock 18.3.B.0.31 fimware with CWM 6.0.4.6 from DooMLoRD & Ric is diasbled.
Flashing instructions:
*** Download the file & renamed it to boot.img
put the boot.img file in fastboot directory.
Turn OFF your M2 dual and plug in via USB with VOL+ key pressed. Blue LED should blink.
Open terminal/CMD, go to to dir with boot.img and type:
OR
Flash with Flastool
DOWNLOAD
How to Root
Install Kernel with CWM above.
download the latest SuperSU update.zip from: http://download.chainfire.eu/supersu and save on your SD card
reboot into recovery and flash the supersu package.
reboot your device
Click to expand...
Click to collapse
U R AWESOME ric is disabled cwm running and system working fine I was looking for that for 2 months :good::good::good::good::good::good::good::good::good:
Please pack for version 18.3.1.B.0.18 too!
Nice :good:
waiting for 18.3.1.B.0.18 :angel:
Thanks for the quick response!!
Really awesome work!
It is not good to assign someone else currently. My kernel for their outstanding, and I can prove that it's mine.
quick response :good::good::good:
Amor Cbr said:
quick response :good::good::good:
Click to expand...
Click to collapse
Work on D2305 .. thanks bro :good::good:
thanks
Work on my D2302 with 18.3.1.B.0.18(4.4.4)
Bro please make kernel with CMW for D2303 firmware .22 latest. Need kernel with CMW.
Thanks.
[Request]
Needed deodexer and zipalin for D2302 kitkat 4.4.4 pleasee..
working great. thanks
johnsamte said:
Needed deodexer and zipalin for D2302 kitkat 4.4.4 pleasee..
Click to expand...
Click to collapse
For deodexing ROM, you can do it by your own.
Follow this link for instruction. Credits goes to creator.
http://forum.xda-developers.com/showthread.php?t=2713329
Thanks
hello all
I just bought this device. And I don't want to unlock boot loader quite yet. My problem is flashtool is not installing drivers for my device. It always says drivers need to be installed. My previous device was xperia u so i know little details that noobs encounter so please help me.
thank you, sir. awesome
Vtrendzzy said:
hello all
I just bought this device. And I don't want to unlock boot loader quite yet. My problem is flashtool is not installing drivers for my device. It always says drivers need to be installed. My previous device was xperia u so i know little details that noobs encounter so please help me.
Click to expand...
Click to collapse
U can use adbdriverInstaller to install the driver.
Is possible make this for LockedBootloader?.. I Have 4.4.4 LockedBoot disable ric - full access root
noob question
hi all,
can ayone tell me how to : "go to to dir with boot.img and type:"
Yes, I know this is a noob question. so please help me.
thanks.
COLLECTION OF FRESH FTFs ; )
D2303 new!
CDA: 1281-1576
Market: Customized IT
Network: GLOBAL-LTE
Release: 18.3.1.C.1.16 / R1B
Size: 1021.04 MB
Click to expand...
Click to collapse
DOWNLOAD: https://mega.nz/#!61wE2aBT!RagTb52Hw8wHkXfwAzaIqi-DF2Oo0dxTcUBzuJF-G3Y
D2302
CDA: 1280-6952
Market: Customized SG
Network: Global
Release: 18.3.1.B.1.10 / R1B
Click to expand...
Click to collapse
DOWNLOAD: https://mega.co.nz/#!H84zUKQK!Z2mE9UhteXtb3TFMRNi4tIqjIPWGs8l5s9LTa7P0gEg
D2305
CDA: 1281-0446
Market: Customized AR
Network: Global
Release: 18.3.1.A.1.9 / R1B
Click to expand...
Click to collapse
DOWNLOAD: https://mega.nz/#!78wzFCRJ!VlHAod6DP5s9PyDOGNGb2EbNQvuPPt2FNf2LrtKeQu0
D2403 new!
CDA: 1288-9929
Market: Customized Switzerland
Network: GLOBAL-LTE
Release: 18.3.1.C.1.17 / R3B
Click to expand...
Click to collapse
DOWNLOAD: https://mega.nz/#!5hB02SiA!HwwOfmD-zEa9P59IVqWk9KVO4daQ4Kqx1MIW5D5lPHs
D2406 new!
CDA: 1287-4566
Market: Commercial and Journalists
Network: AMERICAS-LTE
Release: 18.3.1.C.1.17 / R1B
Click to expand...
Click to collapse
DOWNLOAD: https://mega.nz/#!ZooSzLZA!bp0gTy2Qo6ah9iHcaS3i5cAHUA6MZrsqeRsSoVSlfb8
D2306 new!
CDA: 1281-2418
Market: Customized US
Network: AMERICAS-LTE
Release: 18.3.1.C.1.17 / R1B
Click to expand...
Click to collapse
DOWNLOAD: https://mega.nz/#!x5hmjITD!U3yYhR2WR6E5ZjaPpS-WeHflFSB52zJZOqFvv3rqzCQ
Pre-Rooted flashable Zip for D2303, made by @AleksJ
CDA: 1281-1516
Market: Mobitel BG
Network: GLOBAL-LTE
Release: 18.3.1.C.1.15 / R4B
Click to expand...
Click to collapse
DOWNLOAD: https://mega.co.nz/#!OhNTTIDT!rgZE76kKIP2HhjMZEZinuZU52x-8zVm1rToAvuGejzI
MODEM: https://mega.co.nz/#!u443WCRB!KDp43GmDtY8IeLmUbD2PuobQ4t4LjhiBLz3_qFfivCk
Steps: Flash zip via PhilZ, then poweroff your device, flash the MODEM FTF. Reboot & Enjoy
WARNING: This is NOT a recompilation of links. All .16 FTF's were made by me and uploaded to my cloud accounts. If you want to share them you are able to, but do not forget to give credits. (Gizmobolt ).
Kudos to XperiaBlog, specially to John, for the D2403, D2406 and the D2306 latest links.
linuxct said:
I still don't know what comes inside of it (surely not lollipop), but I'm going to try it now
DOWNLOAD: https://mega.co.nz/#!7tw21QrA!WyAg9wdAUiJM7M4eaTvgE5YJxOqaK18ujRHlZo_5ZCA
Click to expand...
Click to collapse
That update rolled out mainly for new bootloader (you cant throw bootloaders unofficially).
galaxyfreak said:
That update rolled out mainly for new bootloader (you cant throw bootloaders unofficially).
Click to expand...
Click to collapse
Then, can anyone install it even though they have locked (old) bootloaders?
I didn't see any new .sin over there, btw..
linuxct said:
Then, can anyone install it even though they have locked (old) bootloaders?
I didn't see any new .sin over there, btw..
Click to expand...
Click to collapse
Actually I'm not sure how they did it with stock ROM, probably recovery partition is there but not writable while BL is locked.
galaxyfreak said:
Actually I'm not sure how they did it with stock ROM, probably recovery partition is there but not writable while BL is locked.
Click to expand...
Click to collapse
Yeah, most probably...
BTW, I'm preparing FTF's for D2302 and D2305 (unique devices that got the update). Expect them in an hour or so.
New links added. Enjoy
It seems that there is nothing new for locked devices, but all old available solutions are compatible with this version.
I tried with this bundle.
AleksJ said:
It seems that there is nothing new for locked devices, but all old available solutions are compatible with this version.
I tried with this bundle.
Click to expand...
Click to collapse
Something seems to be wrong there
EDIT: Nope, forget it, it was just temporal... My bad
it was minor update but require to download all system
is there any advantage or optimization in this build?
i read galaxyfreak post about new bootloader but dont know what it means
batoem said:
it was minor update but require to download all system
is there any advantage or optimization in this build?
i read galaxyfreak post about new bootloader but dont know what it means
Click to expand...
Click to collapse
There is a new (official) bootloader for our phone which allows to boot from a recovery partition (separated from the kernel). The kernel should have been upgraded to 3.10 as well. The problem is that the new feature works only with unlocked bootloaders. Having the ability to boot from the recovery partition simplifies the installation of any ROM into the phone (basically you put the new ROM in a zip file into the SD card and then install it from the recovery partition. No need for a computer with Flashtool). Also flashing a new ROM won't overwrite the recovery, unless it is made to do so.
Hating this .15 compilation so far. Phone is getting warmer and warmer, and moving between apps is tedious...
Great. I can't downgrade the kernel to the JB version, so no more rooting (locked bootloader). I get this error message in Flashtool:
Code:
ERROR - Processing of loader.sin finished with errors
Is it something wrong with my setup or Sony just screwed us up on purpose?
Miche1asso said:
Great. I can't downgrade the kernel to the JB version, so no more rooting (locked bootloader). I get this error message in Flashtool:
Code:
ERROR - Processing of loader.sin finished with errors
Is it something wrong with my setup or Sony just screwed us up on purpose?
Click to expand...
Click to collapse
I'm going to try to do it right now o.0
EDIT: YES!! They f*cked up!!
I Can't go backwards!! I can't even flash .13! OMFG
@Miche1asso I GOT IT
Uncheck Bootbundle in exclude !!!
linuxct said:
I'm going to try to do it right now o.0
EDIT: YES!! They f*cked up!!
I Can't go backwards!! I can't even flash .13! OMFG
Click to expand...
Click to collapse
Damn!! Will the Z3 rooting work with it? I can't even downgrade to the previous KK version!!
Miche1asso said:
Damn!! Will the Z3 rooting work with it? I can't even downgrade to the previous KK version!!
Click to expand...
Click to collapse
Nope, I already talked with @zxz0O0 about that and almost impossible. Check the comment above
everytime I flash bootbundle from .13 I have to use EMMA to update the bootloader. Curious.
Having problems trying to make pre-rooted zip using the latest updated firmware myself. Keep getting the following errors could not find amss fs1 and could not find amss fs2
Tried Xperiafirm and flashtool got the ftf keep getting the same errors
D2303 stock deodexed 4.4.4 KK rooted philz touch recovery xposed Bravia engine 2 x-reality
linuxct said:
@Miche1asso I GOT IT
Uncheck Bootbundle in exclude !!!
Click to expand...
Click to collapse
? Can you be a bit more specific? I'm using Flashtool. It doesn't give me any option to uncheck (but I have just the kernel. I messed up and deleted the full FTF updating Flashtool).
Never mind. I see now that there is the option with a full FTF. Crap, I must download the full JB ROM again.
Miche1asso said:
? Can you be a bit more specific? I'm using Flashtool. It doesn't give me any option to uncheck (but I have just the kernel. I messed up and deleted the full FTF updating Flashtool).
Never mind. I see now that there is the option with a full FTF. Crap, I must download the full JB ROM again.
Click to expand...
Click to collapse
Use this if you need it
https://mega.co.nz/#!fh4XjDpR!6L1oD3bFVkPbEp-t-dzhCU3bnaXF8kMI3LfaqAHZADU
This week sony release the new upgrade build for MarshMallow 32.2.A.0.224. I am currently using build 32.1.A.1.185 with ROOT ACCESS which I did using this ROOTING GUIDE for XPERIA Z5
http://forum.xda-developers.com/xperia-z5/general/guide-rooting-unlocking-bootloader-t3354307
I have read here in on this page http://forum.xda-developers.com/z5-compact/general/root-partially-upgrade-to-32-2-0-224-t3391235 , that one of the guys upgraded to this new build without loosing ROOT ACCESS to his Z5. All I wanted to ask should I continue like him Upgrading from my PC/PHONE to the new build without loosing root access or is there going to be some long lengthy UPGRADING GUIDE for this new Z5 Build.?:silly::crying::cyclops:
It's easy. Why don't you just flash your Firmware and your Kernel with Recovery again and install SuperSu again? Or you might try FlashFire by Chainfire
ali112 said:
It's easy. Why don't you just flash your Firmware and your Kernel with Recovery again and install SuperSu again? Or you might try FlashFire by Chainfire
Click to expand...
Click to collapse
But what do you mean by Flashing and kernel with Recovery?:crying::silly: I mean I know about Flashing and all this recovery stuff. But please can you elaborate further on what you said ? I will be thankful to you
Well, you do almost exactly the same as in the guide, but you leave out the drm backup Part (not the restore part) and you dont use the firmware version in your guide, you use the newest one avaliable which you can download with xperifirm
ali112 said:
It's easy. Why don't you just flash your Firmware and your Kernel with Recovery again and install SuperSu again? Or you might try FlashFire by Chainfire
Click to expand...
Click to collapse
ali112 said:
Well, you do almost exactly the same as in the guide, but you leave out the drm backup Part (not the restore part) and you dont use the firmware version in your guide, you use the newest one avaliable which you can download with xperifirm
Click to expand...
Click to collapse
Ahan .. Got it .... :good::silly: .. Did you try this method? Maybe the newer build might have some kind of security feature that this old guide will fail to address and thus ending up with NON-ROOTED Upgraded MarshMallow. I am optimistic about the return of Sony' STAMINA MODE. Thats why I want to upgrada ASAP because this current DOZE MODE of MM itself is sucker and doesnt deliver as it is advertised
I think what ali112 said makes sense, the only question I have is wouldn't we require an updated version of the kernel too?
This hasn't been updated yet: http://forum.xda-developers.com/xpe...-twrp3-0-z5-adv-stock-kernel-2016-03-t3333829
And from what I see, this one had a SIM detection error (haven't tried it myself): http://forum.xda-developers.com/xperia-z5/development/32-2-0-224-ftf-rootable-kernel-t3391071/page4
Dr. Mantis Toboggan said:
I think what ali112 said makes sense, the only question I have is wouldn't we require an updated version of the kernel too?
This hasn't been updated yet: http://forum.xda-developers.com/xpe...-twrp3-0-z5-adv-stock-kernel-2016-03-t3333829
And from what I see, this one had a SIM detection error (haven't tried it myself): http://forum.xda-developers.com/xperia-z5/development/32-2-0-224-ftf-rootable-kernel-t3391071/page4
Click to expand...
Click to collapse
It's easy to upgrade, download the latest . ftf extract the kernel and prepair it as before, flash the new .ftf with flashtool without wiping any, then flash the new prepaired kernel with fastboot.
This worked for me
/MKL
Yes, MKL is right. Mantis is right. I havent read the whole guide, I thought it includes the extraction of the kernel and patching it. Alternatively you could use AndroPlus Kernel v31 or higher
Don't be too exciting for stamina mode. It is really bad... I mean it disables all animations....
This post is successor to
https://forum.xda-developers.com/z5...ting-xperia-z5-z5p-variants-drm-keys-t3437902
SONY has pushed update 32.4.A.0.160 for XPERIA Z5 E6833 / E6853 and E6883 which is on Android 7.1.1 (unexpectedly)
THOSE WHO NEVER ROOTED THEIR Z5 / Z5P AND POSSIBLY HAVE LOCKED BOOT LOADER MUST READ THIS
https://forum.xda-developers.com/z5...ting-xperia-z5-z5p-variants-drm-keys-t3437902
THOSE WHO ALREADY HAVE ROOTED Z5P CAN PROCEED because you are already aware of
- method of extracting TA.img either via DIRTYCOW SCRIPT (android6) and ivoryroot (android 5x)
- flashing Nougat by latest flashtool v0.9.23.2 (also knows replacing xjar files to make flashtool uptodate )
- ALL mother board and related drivers are installed
- you already have downloaded FTF 32.4.A.0.160 of your VARIANT/region and
- ftf downloaded by XPERIFIRM tool (recommended)
the twrp installed stock modified kernel of 32.4.A.0.160 can be found at
https://mega.nz/#F!uVBgFTwQ!xYufkAlsDsajEIEJ3BoDDg
thanks @ytheekshana / @fdson12 for providing sin files
Simply,
1. put superSU in sdcard
2. flash the firmware (if you havent already)
3. flash the kernel
4. boot in to recovery
5. flash the superSU
6 reboot
ORRR if you prefer superuser-r259 then
1. put superuser-r259.zip in sdcard
2. phh_SuperUser_v1.0.3.3.apk also in sdcard
3. flash the firmware (if you havent already)
4.reboot in to recovery
5. flash the superuser-r259.zip
6. Reboot
7. instal phh_SuperUser_v1.0.3.3.apk
8. reboot
9. check for rootaccess
MAKE SYSTEM WRITABLE !
https://forum.xda-developers.com/xperia-z5/general/z5-making-writable-32-3-0-372-root-t3551067
Screenshot, my device on kernel given above
Finally
ytheekshana said:
Finally
Click to expand...
Click to collapse
please send me your kernel.sin for 32.A.Z.0.160- E6853
thank you
YasuHamed said:
please send me your kernel.sin for 32.A.Z.0.160- E6853
thank you
Click to expand...
Click to collapse
sent it
ytheekshana said:
sent it
Click to expand...
Click to collapse
updated the link
please check
That's fast. Amazing!!
---------- Post added at 11:52 PM ---------- Previous post was at 11:48 PM ----------
It has drm fix and the other things?
Waiting for E6883..
Kernel.sin sent.....
fdson12 said:
Waiting for E6883..
Kernel.sin sent.....
Click to expand...
Click to collapse
Sir
I have updated E6883.... .img file at https://mega.nz/#F!uVBgFTwQ!xYufkAlsDsajEIEJ3BoDDg
after putting superSU in sd card , kindly flash it
just incase, if device goes in to bootloops or softbricks
holding power+volumup for 15 seconds will make the device vibrate THRICE , and on second vibration. releasing fingers IMMEDIATELY will switchoff the device for you to connect in flashmode/fastboot mode to flash the roms/kernels again
YasuHamed said:
Sir
I have updated E6883.... .img file at https://mega.nz/#F!uVBgFTwQ!xYufkAlsDsajEIEJ3BoDDg
after putting superSU in sd card , kindly flash it
just incase, if device goes in to bootloops or softbricks
holding power+volumup for 15 seconds will make the device vibrate THRICE , and on second vibration. releasing fingers IMMEDIATELY will switchoff the device for you to connect in flashmode/fastboot mode to flash the roms/kernels again
Click to expand...
Click to collapse
thanks for update friend e6883
It has DRM fix???
Shivam1754 said:
It has DRM fix???
Click to expand...
Click to collapse
yes it has
How do I restore my DRM keys if I have TA-xxxxxx.img from iovyroot?
Thank you!
YasuHamed said:
Screenshot, my device on kernel given above
Click to expand...
Click to collapse
can you add latest TWRP recovery or any upper version because in this TWRP recovery not showing Internal storage......
icaruswalks said:
How do I restore my DRM keys if I have TA-xxxxxx.img from iovyroot?
Thank you!
Click to expand...
Click to collapse
please see this
its for XZ but it applies to X also
https://forum.xda-developers.com/xperia-xz/how-to/how-to-unlock-bl-kernel-twrp-root-t3541648
@YasuHamed couldnt get my phone to boot, when trying to install phh supersu, i wouldnt install from twrp e6853 NOBA rom from flashtool download
claesr said:
@YasuHamed couldnt get my phone to boot, when trying to install phh supersu, i wouldnt install from twrp e6853 NOBA rom from flashtool download
Click to expand...
Click to collapse
if you are installing phh superuser then
1. flash superuser-r259.zip from twrp
2. boot and install phh_superuser...apk
then reboot.
however i am personally using superSU. since on phh_superuser i was unable to give /system RW access
Just unable to boot into TWRP recovery.It stuck on splash screen and the LED is yellow.I tried the rootkernel in this thread too:https://forum.xda-developers.com/z5-premium/general/firmware-32-3-0-372-certified-android-7-t3537948
and got same problem.My device is z5p dual,E6883,I have already install the 32.4.A.0.160 firmare downloaded from xperifirm.Root access and DRM fix works perfectly,the only problem is that I cannot boot into TWRP.I dont know what's wrong.Any advice please?
do this kernel support SafetyNet and magisk?
Hi!
I don't understand this, if the kernel has the drm fix, is necessary downgrade the phone and backup the original drm? Or can I install this kernel, twrp and root directly the stock 7.1.1 version?
Hi I want to root my xa. Plz help me.
Chaminxa said:
Hi I want to root my xa. Plz help me.
Click to expand...
Click to collapse
You can't. We have to wait for Sony to release the open source archive for the Xperia XA and XA Ultra. After we have the archive, we can build the kernel which enables flashing the recovery. You can check when the archive will be uploaded here.
@davixdevelop,
absolutley nonsense.
@Chaminxa,
downgrade with flashtool to mm,
save your ta,
open your bootloader,
update your device to nougat with flashtool,
flash twrp,
flash kernel,
flash supersu.zip &
done.
you can mod your kernel by yourself,
the only things you need is
this tool https://forum.xda-developers.com/crossdevice-dev/sony/poc-real-trim-instead-drm-fix-t3552893 ,
your ta.img backup & your kernel.sin
MysticEnforcer said:
@davixdevelop,
absolutley nonsense.
Click to expand...
Click to collapse
Absolutely nonsense? Say that to the countless people before me, who said the same thing. And your method only works if you made a backup of the TA partition, which I'm sure a lot of people didn't do, as the only widely known tool to do that, worked based on a exploit which was patched.
And before you go out, calling people "absolutely nonsense", you got to understand that not everyone knows everything. That's why forums like this exist, to share knowledge and experience.
not everybody knows everything, is right.
this is why i've appealed to the coarse approach & to the tool
but to say directly, you can't, is in my eyes nonsense
davixdevelop said:
You can't. We have to wait for Sony to release the open source archive for the Xperia XA and XA Ultra. After we have the archive, we can build the kernel which enables flashing the recovery. You can check when the archive will be uploaded here.
Click to expand...
Click to collapse
How long does it usually take for them to release the archive?
goldblot said:
How long does it usually take for them to release the archive?
Click to expand...
Click to collapse
Well, for the version 33.2.B.4.70 it took them 13 days to release the archive after the version 33.2.B.4.70 was released for the first carrier on 21.2.2017.
Open source archive has been released...
Now we can root. Yeahh.
:fingers-crossed:
MysticEnforcer said:
@davixdevelop,
absolutley nonsense.
@Chaminxa,
downgrade with flashtool to mm,
save your ta,
open your bootloader,
update your device to nougat with flashtool,
flash twrp,
flash kernel,
flash supersu.zip &
done.
you can mod your kernel by yourself,
the only things you need is
this tool https://forum.xda-developers.com/crossdevice-dev/sony/poc-real-trim-instead-drm-fix-t3552893 ,
your ta.img backup & your kernel.sin
Click to expand...
Click to collapse
Mediatek devices have different partition table. Does ta_poc support that?
TA partition is mounted at "/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/ta"
BlueTR said:
Mediatek devices have different partition table. Does ta_poc support that?
TA partition is mounted at "/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/ta"
Click to expand...
Click to collapse
ta_poc is a tool for sony devices & it is not compatible
MysticEnforcer said:
ta_poc is a tool for sony devices & it is not compatible
Click to expand...
Click to collapse
Sorry, I meant mediatek Sony devices. C5U, XA, XAU, XA1, XA1U, L1 etc.
MysticEnforcer said:
ta_poc is a tool for sony devices & it is not compatible
Click to expand...
Click to collapse
XA and Ultra aren't some Sony devices? If this is the case, Xperia X and Z lines are not some Sony devices too but Qualcomm TA and security process are same as Flagship devices but the ta_poc only need to be ported on XA (and XA1). You can look at the ramdisk in the boot.img to understand
davixdevelop said:
You can't. We have to wait for Sony to release the open source archive for the Xperia XA and XA Ultra. After we have the archive, we can build the kernel which enables flashing the recovery. You can check when the archive will be uploaded here.
Click to expand...
Click to collapse
Chaminxa said:
Now we can root. Yeahh.
:fingers-crossed:
Click to expand...
Click to collapse
Now that Sony released the source code for 33.3.A.0.131, what is the next step for rooting Nougat?
I'm not an expert, sorry if this is a noob question:
If I understand correctly, we would need a boot.img (from these sources), a recovery like TWRP, and the SuperSU binary right?
So the only thing missing is the boot.img?
jjmontero9 said:
Now that Sony released the source code for 33.3.A.0.131, what is the next step for rooting Nougat?
I'm not an expert, sorry if this is a noob question:
If I understand correctly, we would need a boot.img (from these sources), a recovery like TWRP, and the SuperSU binary right?
So the only thing missing is the boot.img?
Click to expand...
Click to collapse
Please search a little before posting, the guide is here: https://forum.xda-developers.com/xperia-xa/how-to/f31xx-how-to-root-xperia-xa-noob-t3638727
rrvuhpg said:
Please search a little before posting, the guide is here: https://forum.xda-developers.com/xperia-xa/how-to/f31xx-how-to-root-xperia-xa-noob-t3638727
Click to expand...
Click to collapse
I know the guide, my question was if the only thing missing is the boot.img which contains the kernel
I was planning to try to build it myself.
jjmontero9 said:
I know the guide, my question was if the only thing missing is the boot.img which contains the kernel
I was planning to try to build it myself.
Click to expand...
Click to collapse
Nothing is missing. If your real question is "What I need if I want to make all files alone?"
The answer is:
-the kernel sources,
-a stock boot,
-a TWRP to port or "device tree" sources to build it
-SuperSu or Magisk
-a computer with a Linux OS
rrvuhpg said:
Nothing is missing. If your real question is "What I need if I want to make all files alone?"
The answer is:
-the kernel sources,
-a stock boot,
-a TWRP to port or "device tree" sources to build it
-SuperSu or Magisk
-a computer with a Linux OS
Click to expand...
Click to collapse
Oh sorry, my fault, I didn't notice you already uploaded a boot.img for Nougat on a separate thread
Thanks and sorry for the inconvenience.