Database Info

[ROOT] Root Your Xperia M2 !! (Update: For Kitkat!!)

:laugh::laugh::laugh:
Hi guys I'll share tutorial how to Root Your Xperia M2 Single & Dual
I just n00bs here, need to share my knowledge
4.3 JELLY BEAN
LOCKED BOOTLOADER
Using Towel Root (Download) download & click Root, Your device will rebooted. After that download SuperSU in Play Store.
UNLOCK BOOTLOADER
Just Download The Recovery For Your Device (Single or Dual) and Download SuperSU.zip and flash the zip You get rooted fast!!
4.4 KITKAT
LOCKED BOOTLOADER
1. Downgrade to JB, Root your Phone using Towel Root in Jelly Bean
2. Update via OTA to KK 4.4.2 or KK 4.4.4 whatever you need (4.4.4 is recommended)
3. In this process, don't try to install or uninstall anything
4. Wait for booting finish
5. Install latest SuperSU from Play Store
6. Open Flashtool in PC
7. Connect your phone to PC
8. Now flashtool will describe your phone information, then click Root Tab in top, after that choose force root by TowelRoot
UNLOCK BOOTLOADER
1. Flash FTF 4.4 Kitkat
2. Flash CWM Kernel (Whatever it's for 4.3 or 4.4) You must get booted to CWM only
3. Download & Flash SuperSU.zip
4. Power Off & Flash Kernel 4.4 From FTF
5. You can find how to fix mount system here
If you have notifications from SuperSU that notice binary needs update, just choose in Normal mode, don't try in CWM/TWRP mode!
Hit Thanks if I helped You :victory:

Tested on M2 (D2305) 18.0.A.1.30. Both ways work stable. Sorry for my bad English

mjckey said:
Tested on M2 (D2305) 18.0.A.1.30. Both ways work stable. Sorry for my bad English
Click to expand...
Click to collapse
OK Bro thanks for feedback:fingers-crossed:

of course its work! :fingers-crossed:

Dickey Kid'deviel said:
of course its work! :fingers-crossed:
Click to expand...
Click to collapse
Hi owner icb
How about v4 :fingers-crossed:

Dickey Kid'deviel said:
of course its work! :fingers-crossed:
Click to expand...
Click to collapse
Yep

mrguru said:
Hi owner icb
How about v4 :fingers-crossed:
Click to expand...
Click to collapse
what is icb? i dont know about that

Dickey Kid'deviel said:
what is icb? i dont know about that
Click to expand...
Click to collapse
In my Country, ICB is a BANK not Custom ROM

still not working on kitkat 4.4.2 bro

@Bin4ry @DooMLoRD kitkat root 4.4.2 Update please

From the towelroot thread:
"..towelroot used a specific vulnerability in kernels dated before June 3. If your kernel is dated after June 3, the vulnerability has been patched and there is nothing GeoHot can "fix" to make towelroot work on your device.."
Click to expand...
Click to collapse
Looks like the kernel for the M2 KitKat update has this fixed. Too bad; might stay on 4.3 Jelly Bean for a while. I just can't give up root access and Xposed Framework.
:silly:

Naufal Sidik said:
4.4 KITKAT
UNLOCK BOOTLOADER
Downgrade Your M2 to 4.3 JB, do root method like Root For 4.3 JB. Flash FTF Kitkat with exclude Kernel.sin & Loader.sin. Very Important!! Don't do Wipe Cache & Data!! Then reboot to homescreen you will get Root!! You can find how to fix mount system here
Click to expand...
Click to collapse
Which part of this makes it impossible to use it on a locked bootloader? Also, I don't seem to be able to untick flashing of loader.sin in flashtool. Did you mean remove it from .ftf?

Hello,
Does the author of this method root KK, may explain how he was able to make a flash FTF KK (18.3.C.0.37) without kernel.sin and loader.sin ????
Me after this operation the phone at all is not "wake"
Please write exactly step by step how this done.
A loader.sin and kernel.sin I was able to remove the FTF using rar
Because I do not see the possibility of removing loader.sin by flashtool.
Also, this method presented here, unfortunately, did not work.
Back to JB.
In spite of everything thank you to the author's guide to root for the KK .
Regards.
*Written by Google Translate

This is what I'm getting as well. I thought it was because of the bootloader, but yours is unlocked so... The instructions for KK are clearly unclear (no pun intended)

i make easy root for all xpreia M2.
but i need cwm for install this.
any body have cwm or kernel with cwm for kitkat???????
http://www.mediafire.com/download/3chd81anczin4g2/root1.zip
.

alinolaw71 said:
i make easy root for all xpreia M2.
but i need cwm for install this.
any body have cwm or kernel with cwm for kitkat???????
http://www.mediafire.com/download/3chd81anczin4g2/root1.zip
.
Click to expand...
Click to collapse
AFAIK, I don't think there is cwm for KK...
also, does this allow us to mount R/W?

so is your root for unlocked bootloaders only ,or for all ,and have you tested it .alinolaw71

StardustGeass said:
AFAIK, I don't think there is cwm for KK...
also, does this allow us to mount R/W?
Click to expand...
Click to collapse
yup bro.
.
---------- Post added at 06:44 PM ---------- Previous post was at 06:42 PM ----------
wrtease5865 said:
so is your root for unlocked bootloaders only ,or for all ,and have you tested it .alinolaw71
Click to expand...
Click to collapse
this mod for all device with lock and unlock bl.
.

so does it give full root .and what about ndr utils .any news on cwm for us on d2303 kk .also the root give full right on kitkat

alinolaw71 said:
i make easy root for all xpreia M2.
but i need cwm for install this.
any body have cwm or kernel with cwm for kitkat???????
http://www.mediafire.com/download/3chd81anczin4g2/root1.zip
.
Click to expand...
Click to collapse
How to install it ?????
With CWM - of course, no problem, but there is no CWM for the [2303] so as flash .....?

[Q] how to root the xperia m2 with kitkat ?

how to root the xperia m2 with kitkat? :crying::crying::crying:

cidneyebruna said:
how to root the xperia m2 with kitkat? :crying::crying::crying:
Click to expand...
Click to collapse
1 Unlock the bootloader
2 Install CWM from D2302
3 Go to the CWM and install SuperSU
4 Go back stock kernel of 4.4 kernel.sin and fotakernel.sin
5. Reboot
at the moment the only way

how to make root on d2303?

I think people wants to make root without unlock bootloader.
So actually, there's no solution..... you must unloack your bootloader or wait

help
you must use towelroot to root your device

ravendra275 said:
you must use towelroot to root your device
Click to expand...
Click to collapse
On KitKat of Xperia M2, Towelroot doesn't works...

joeljr38 said:
On KitKat of Xperia M2, Towelroot doesn't works...
Click to expand...
Click to collapse
ok dude
have you tried frama root

Hi,
Big problem..... I've got a D2303, unlock bootloader is OK, CWM and supersu flashed.
Root is done on my system but, I'can't mount the system with read/write permission..... so, no busybox, no xposed.....
Titanium back up works very well (restoring my app right now)
Anybody got an idea of what happen ?

if this works for d2305? i want UBL and deodex it

have you try vroot?

vroot did not work

ripp2003 said:
Hi,
Big problem..... I've got a D2303, unlock bootloader is OK, CWM and supersu flashed.
Root is done on my system but, I'can't mount the system with read/write permission..... so, no busybox, no xposed.....
Titanium back up works very well (restoring my app right now)
Anybody got an idea of what happen ?
Click to expand...
Click to collapse
Ok so the boot .img needs to be modified cause actually, this line block the write remount command : r.o secure=0

NFound said:
1 Unlock the bootloader
2 Install CWM from D2302
3 Go to the CWM and install SuperSU
4 Go back stock kernel of 4.4 kernel.sin and fotakernel.sin
5. Reboot
at the moment the only way
Click to expand...
Click to collapse
Please Build Kernel Support Cwm For Kitkat Sir....

i've tried with towelroot V.3,, wich can handle the problem (rooting on kitkat) but it didnt work
The towelroot v3 only support kernel before june 2014,,,n the other side the M2 Kitkat has a new kernel..

Root for a D2303 model with 4.4.2 build 18.3.C.0.37
NFound said:
1 Unlock the bootloader
2 Install CWM from D2302
3 Go to the CWM and install SuperSU
4 Go back stock kernel of 4.4 kernel.sin and fotakernel.sin
5. Reboot
at the moment the only way
Click to expand...
Click to collapse
Could anyone elaborate further on a similar approach applicable to a D2303 model with 4.4.2 build 18.3.C.0.37?
Any successful attempt?
Many thanks

I have the same problem - any help would be much appreciatted

root on D2303 with kitkat
Originally Posted by ripp2003 View Post
Hi,
Big problem..... I've got a D2303, unlock bootloader is OK, CWM and supersu flashed.
Root is done on my system but, I'can't mount the system with read/write permission..... so, no busybox, no xposed.....
Titanium back up works very well (restoring my app right now)
Anybody got an idea of what happen ?
Any app that accesses the system (busybox, exposed ect.) Must be flashed via recovery. This method works fine on my device. Although each time the recovery must be flashed and once the appropriate apps are flashed, must be the stock kernel flashed via flash tool again, but this is at the moment the only way to get a system with the appropriate apps and root privileges!
sorry for the bad english

dotzi75 said:
Originally Posted by ripp2003 View Post
Hi,
Big problem..... I've got a D2303, unlock bootloader is OK, CWM and supersu flashed.
Root is done on my system but, I'can't mount the system with read/write permission..... so, no busybox, no xposed.....
Titanium back up works very well (restoring my app right now)
Anybody got an idea of what happen ?
Any app that accesses the system (busybox, exposed ect.) Must be flashed via recovery. This method works fine on my device. Although each time the recovery must be flashed and once the appropriate apps are flashed, must be the stock kernel flashed via flash tool again, but this is at the moment the only way to get a system with the appropriate apps and root privileges!
sorry for the bad english
Click to expand...
Click to collapse
ok, I understrand : so I have to install cwm recovery, install busybox and xposed then reflash only kernel... will try Thanks

Clarifications pending
dotzi75 said:
I've got a D2303, unlock bootloader is OK, CWM and supersu flashed.
Click to expand...
Click to collapse
Your post raised a few questions:
1. Did you root your D2303 running Android 4.4.2? How?
2. What recovery did you flash? Where did you find it? Did you use one dedicated to D2302 or D2305?
Many thanks for your clarifications
Regards

hi
no any way to root Sony Xperia M2 Dual ( d2302 ) Kitkat ?
i dont like to open bootloader or update my phone from 4.3 to 4.4 with ota , i flashin my phone with flashtool to update 4.4. soo , i try to root with towelroot v1 , 2 , 3 and vrot but all of them not working .
no way ?

Xperia M2 - unlock Bootloader on Software 18.6.A.0.182.

hello Guys,
ive got an M2 (D2303) sice 2 Weeks with Stock Lollipop 5.1.1
BL unlocked allowed = YES
But Sony dev says "Important note! In order to unlock your Xperia™ M2 you need to be on software version 18.3.C.0.37"
My M2 works with 18.6.A.0.182.
need to root the Phone for a Special App which Needs root permission.
Question, whats the way, if there is one, to unlock my Bootloader for rooting the device.
P.S. sorry for my "beginner-english" and many thanks to help me out!

koesven said:
hello Guys,
ive got an M2 (D2303) sice 2 Weeks with Stock Lollipop 5.1.1
BL unlocked allowed = YES
But Sony dev says "Important note! In order to unlock your Xperia™ M2 you need to be on software version 18.3.C.0.37"
My M2 works with 18.6.A.0.182.
need to root the Phone for a Special App which Needs root permission.
Question, whats the way, if there is one, to unlock my Bootloader for rooting the device.
P.S. sorry for my "beginner-english" and many thanks to help me out!
Click to expand...
Click to collapse
You can root your phone without unlock the bootloader.
You can unlock the bootloader in Any versión (i did in lollipop) you can do it with Sony way or with flashtool

thanks for reply!
can you tell me what is the easiest way to root my M2 with Lollipop? how do you did it?
so the bootloader unlock is only need for flashing Custom-Roms?
Big thanks

koesven said:
can you tell me what is the easiest way to root my M2 with Lollipop? how do you did it?
Click to expand...
Click to collapse
The easiest way is in this case NOT the safest way! KingRoot should do the trick on 18.6.A.0.182 FW but it also sends your phones IMEI to a cloud in China. I wouldn't recommend it!
I did it like this:
1. Use XperiFirm to download and FlashTool to create (e.g.) D2303_18.3.1.C.1.17_CE.ftf [4.4.4 Kitkat] (or search on this forum for it)
2. Flash: (e.g.) D2303_18.3.1.C.1.17_CE.ftf with FlashTool
3. Unzip & use: rootkitXperia_20150926-20151005.zip to root
4. Unzip & use: XperiaM2-MultiRecovery-PhilZ-TWRP-CWM-0.8.zip to install multi-recovery
5. Use XperiFirm to download and FlashTool to create 18.6.A.0.182 FW FTF for your D2303, country and provider (or a customized version)
6. Use PRFCreator, UPDATE-SuperSU-v2.46.zip and XperiaM2-MultiRecovery-PhilZ-TWRP-CWM-0.8-flashable.zip to create flashable pre-rooted zip with multi-recovery
7. Reboot into TWRP recovery (when the cyan led glows push/press Volume UP)
8. Flash flashable pre-rooted zip with multi-recovery (using TWRP)
9. Flash zip: ric_disabler-flashable.zip in case you don't have full root access (using TWRP)
Before you begin make sure you have downloaded all needed files and made a backup from all your important phone data!
so the bootloader unlock is only need for flashing Custom-Roms?
Click to expand...
Click to collapse
That is correct. But please read this carefully before you want to unlock the bootloader!
Succes... and don't forget to click on the Thanks! button if you want to thank me.

You Can Root Via Kingroot And Than Replace Kingroot To SuperSU. I Did It For My LB M2 Aqua 182 Firmware And Works Fine. Root Via Kingroot Link Is Here:http://forum.xda-developers.com/xperia-m2/general/news-root-xperia-m2-kingrootlollipop-t3242654 And How To Replace Kingroot To SuperSU Here:http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html?m=1 When You Root Your Smartphone, Finaly Don't Forget RIC Disabler. Download RIC Disabler zip File To Your PC Extract It, Connect Your Smartphone To PC Via USB. Check USB Debug Is ON. Then Tap RIC Disabler's Setup.exe In Your PC While Your Smartphone Is Connected And Follow The Instruction. Here Is RIC Disabler Link: http://sergiocastell.com/ftf/ric_disabler.zip

[Kernel][Stock 5.1.1] Manjuu Kernel for Sony Xperia C3 D2533 / D2502

This is a stock kernel for the Xperia C3 D2533 and D2502 running stock 5.1.1 firmware.​
I am learning from scratch in my free time so updates will be very slow or non-existent, please bear with me until then. Right now I only have a kernel image which must be flashed through ADB (you need to look up in the forums here to install it), nothing else is needed.
Make sure your phone's bootloader is unlocked and has a working recovery, use this guide to do it if you haven't done so.​
Basic requirements:
Phone is rooted and bootloader unlocked
You have a working recovery for your device
You know how to backup and flash images/kernels with TWRP
ADB and Fastboot works perfectly in your computer and phone
You know how to use ADB and Fastboot, otherwise Google it
Install instructions
Just flash the zip file through TWRP, it will take a minute or two to finish up. If you're using Magisk, you need to reflash the Magisk zip to patch the new kernel.
Download link
Manjuu Kernel v5
Changelog:
V5
- Remove Linux patch (It was the wrong way to patch this kernel and will cause conflicts)
- Revert commits from another kernel (also caused some conflicts and increased battery drain)
- Added SafetyNet patch
- This is not tested. Please flash UnSU, the kernel, then Magisk. Right now Magisk v12 will result in high CPU usage, use v11.6 instead. You will trip SafetyNet if you have Xposed or SuperSU in your device.​
Older changelogs:
V4
- Downgrade Intelliplug to 4.0 for better compatibility
- Cleaned up some coding
- Merge some bugfix and improvements (Refer to github commits)
- Now that we have a flashable zip, driver modules are added as well
V3
- Update Intelliplug to 5.0
- Added overclock to 1600Mhz
- Some compilation optimizations
- General kernel bugfix (refer to github commit)
- Update linux kernel to 3.4.5
V2
- Added Intelliplug hotplug
- Added KCAL support (get control app from here)
V1
- First build with Linaro GCC toolchain
Credits List
bauner and his guidance in building kernels
osmosis for his Anykernel2 and AIK
riccorbypro for his help in bringing development
XDA for providing a platform to contribute and share everything Android
And a special no thank you to Sony for being such a potato. The only difference is a potato is a lot more useful than Sony when it comes to customer service.​
XDA:DevDB Information
Manjuu Kernel, Kernel for the Sony Xperia C
Contributors
AutumQueen92
Source Code: https://github.com/AngryManjuu/ManjuuKernel
Kernel Special Features: Compiled with Cortex-A7 optimised toolchain
Version Information
Status: Stable
Current Stable Version: 5.0
Stable Release Date: 2017-04-13
Created 2017-02-27
Last Updated 2017-05-13

Reserved

Great dev , can i use this on D2502 ?
Seem no one use C3 anymore ?!

JustinSang said:
Great dev , can i use this on D2502 ?
Seem no one use C3 anymore ?!
Click to expand...
Click to collapse
Make a backup of your boot.img with TWRP, copy the backup file also into your PC then try flashing it. This might break recovery so be prepared to reflash them if it won't boot. Let me know if it succeeds/fails.
Nobody has yet to tell me about D2502 so this could be a chance to test it out, thanks.

AutumQueen92 said:
Make a backup of your boot.img with TWRP, copy the backup file also into your PC then try flashing it. This might break recovery so be prepared to reflash them if it won't boot. Let me know if it succeeds/fails.
Nobody has yet to tell me about D2502 so this could be a chance to test it out, thanks.
Click to expand...
Click to collapse
work g8t in c3 dual d2502:good::highfive: m used
also xperia m2 xperianze z2 rom work in c3:laugh::good:

monu09 said:
work g8t in c3 dual d2502:good::highfive: m used
also xperia m2 xperianze z2 rom work in c3:laugh::good:
Click to expand...
Click to collapse
So Dual Sim functions are all okay, including data?

AutumQueen92 said:
So Dual Sim functions are all okay, including data?
Click to expand...
Click to collapse
yes work
thkss it work fine

Kernel update to V3, if anyone is still using this thing >.>

What is the benefit to my c3 if I flash the kernel? I'm just wondering.

7thzign said:
What is the benefit to my c3 if I flash the kernel? I'm just wondering.
Click to expand...
Click to collapse
Basically better performance, and better battery life. It also fixes a few bugs here and there, so hopefully it's also more stable.

Thanks for update

error: cannot load 'Manjuu'

chetan3138 said:
error: cannot load 'Manjuu'
Click to expand...
Click to collapse
Be more specific. How did you try to flash it?

AutumQueen92 said:
Be more specific. How did you try to flash it?
Click to expand...
Click to collapse
through command window

chetan3138 said:
through command window
Click to expand...
Click to collapse
Weird, it should work. Try renaming the file to kernel.img and the change the name in the command line as well.
When you installed the fastboot drivers, did you disable signature​ verification in windows first? If not, google how to do it then reinstall drivers and reboot.
If it's still not working try using TWRP instead.

chetan3138 said:
error: cannot load 'Manjuu'
Click to expand...
Click to collapse
Try renaming the file then flash as what autumnqueen said. Thats also my problem at first but when i renamed the file. It fixes the error.

AutumQueen92 said:
Weird, it should work. Try renaming the file to kernel.img and the change the name in the command line as well.
When you installed the fastboot drivers, did you disable signature​ verification in windows first? If not, google how to do it then reinstall drivers and reboot.
If it's still not working try using TWRP instead.
Click to expand...
Click to collapse
Adb doesnt read spaces. Worked after rename and go bootlooped for odexed one.

chetan3138 said:
Adb doesnt read spaces. Worked after rename and go bootlooped for odexed one.
Click to expand...
Click to collapse
Alright, renamed it already. Btw, what odexed?
This should work on stock rom and the deodex patch as well. Is your phone's bootloader unlocked?

AutumQueen92 said:
Alright, renamed it already. Btw, what odexed?
This should work on stock rom and the deodex patch as well. Is your phone's bootloader unlocked?
Click to expand...
Click to collapse
Yeah, unlocked. Btw I have tried it on c3 dual sim. I think its for lte version only

monu09 said:
work g8t in c3 dual d2502:good::highfive: m used
also xperia m2 xperianze z2 rom work in c3:laugh::good:
Click to expand...
Click to collapse
Hi, well thats grt that this kernel works fine. But you mentioned about some rom(Xperia m2 Xperianze z2 rom) working in xperia c3 with this kernel. Can u please give the link to it. Xperia c3 dual do not have any custom rom till date. If the rom given by you works then you will be a God to al the xperia c3 users. I tried to search the rom u mentioned but I found nothing.
Thanks

ROOTED KERNEL E6833-E6853-E6883- 32.4.A.0.160, Android7.1.1 + TWRP

This post is successor to
https://forum.xda-developers.com/z5...ting-xperia-z5-z5p-variants-drm-keys-t3437902
SONY has pushed update 32.4.A.0.160 for XPERIA Z5 E6833 / E6853 and E6883 which is on Android 7.1.1 (unexpectedly)
THOSE WHO NEVER ROOTED THEIR Z5 / Z5P AND POSSIBLY HAVE LOCKED BOOT LOADER MUST READ THIS
https://forum.xda-developers.com/z5...ting-xperia-z5-z5p-variants-drm-keys-t3437902
THOSE WHO ALREADY HAVE ROOTED Z5P CAN PROCEED because you are already aware of
- method of extracting TA.img either via DIRTYCOW SCRIPT (android6) and ivoryroot (android 5x)
- flashing Nougat by latest flashtool v0.9.23.2 (also knows replacing xjar files to make flashtool uptodate )
- ALL mother board and related drivers are installed
- you already have downloaded FTF 32.4.A.0.160 of your VARIANT/region and
- ftf downloaded by XPERIFIRM tool (recommended)
the twrp installed stock modified kernel of 32.4.A.0.160 can be found at
https://mega.nz/#F!uVBgFTwQ!xYufkAlsDsajEIEJ3BoDDg
thanks @ytheekshana / @fdson12 for providing sin files
Simply,
1. put superSU in sdcard
2. flash the firmware (if you havent already)
3. flash the kernel
4. boot in to recovery
5. flash the superSU
6 reboot
ORRR if you prefer superuser-r259 then
1. put superuser-r259.zip in sdcard
2. phh_SuperUser_v1.0.3.3.apk also in sdcard
3. flash the firmware (if you havent already)
4.reboot in to recovery
5. flash the superuser-r259.zip
6. Reboot
7. instal phh_SuperUser_v1.0.3.3.apk
8. reboot
9. check for rootaccess
MAKE SYSTEM WRITABLE !
https://forum.xda-developers.com/xperia-z5/general/z5-making-writable-32-3-0-372-root-t3551067

Screenshot, my device on kernel given above

Finally

ytheekshana said:
Finally
Click to expand...
Click to collapse
please send me your kernel.sin for 32.A.Z.0.160- E6853
thank you

YasuHamed said:
please send me your kernel.sin for 32.A.Z.0.160- E6853
thank you
Click to expand...
Click to collapse
sent it

ytheekshana said:
sent it
Click to expand...
Click to collapse
updated the link
please check

That's fast. Amazing!!
---------- Post added at 11:52 PM ---------- Previous post was at 11:48 PM ----------
It has drm fix and the other things?

Waiting for E6883..
Kernel.sin sent.....

fdson12 said:
Waiting for E6883..
Kernel.sin sent.....
Click to expand...
Click to collapse
Sir
I have updated E6883.... .img file at https://mega.nz/#F!uVBgFTwQ!xYufkAlsDsajEIEJ3BoDDg
after putting superSU in sd card , kindly flash it
just incase, if device goes in to bootloops or softbricks
holding power+volumup for 15 seconds will make the device vibrate THRICE , and on second vibration. releasing fingers IMMEDIATELY will switchoff the device for you to connect in flashmode/fastboot mode to flash the roms/kernels again

YasuHamed said:
Sir
I have updated E6883.... .img file at https://mega.nz/#F!uVBgFTwQ!xYufkAlsDsajEIEJ3BoDDg
after putting superSU in sd card , kindly flash it
just incase, if device goes in to bootloops or softbricks
holding power+volumup for 15 seconds will make the device vibrate THRICE , and on second vibration. releasing fingers IMMEDIATELY will switchoff the device for you to connect in flashmode/fastboot mode to flash the roms/kernels again
Click to expand...
Click to collapse
thanks for update friend e6883

It has DRM fix???

Shivam1754 said:
It has DRM fix???
Click to expand...
Click to collapse
yes it has

How do I restore my DRM keys if I have TA-xxxxxx.img from iovyroot?
Thank you!

YasuHamed said:
Screenshot, my device on kernel given above
Click to expand...
Click to collapse
can you add latest TWRP recovery or any upper version because in this TWRP recovery not showing Internal storage......

icaruswalks said:
How do I restore my DRM keys if I have TA-xxxxxx.img from iovyroot?
Thank you!
Click to expand...
Click to collapse
please see this
its for XZ but it applies to X also
https://forum.xda-developers.com/xperia-xz/how-to/how-to-unlock-bl-kernel-twrp-root-t3541648

@YasuHamed couldnt get my phone to boot, when trying to install phh supersu, i wouldnt install from twrp e6853 NOBA rom from flashtool download

claesr said:
@YasuHamed couldnt get my phone to boot, when trying to install phh supersu, i wouldnt install from twrp e6853 NOBA rom from flashtool download
Click to expand...
Click to collapse
if you are installing phh superuser then
1. flash superuser-r259.zip from twrp
2. boot and install phh_superuser...apk
then reboot.
however i am personally using superSU. since on phh_superuser i was unable to give /system RW access

Just unable to boot into TWRP recovery.It stuck on splash screen and the LED is yellow.I tried the rootkernel in this thread too:https://forum.xda-developers.com/z5-premium/general/firmware-32-3-0-372-certified-android-7-t3537948
and got same problem.My device is z5p dual,E6883,I have already install the 32.4.A.0.160 firmare downloaded from xperifirm.Root access and DRM fix works perfectly,the only problem is that I cannot boot into TWRP.I dont know what's wrong.Any advice please?

do this kernel support SafetyNet and magisk?

Hi!
I don't understand this, if the kernel has the drm fix, is necessary downgrade the phone and backup the original drm? Or can I install this kernel, twrp and root directly the stock 7.1.1 version?