Database Info

[ROOT] Root Your Xperia M2 !! (Update: For Kitkat!!)

:laugh::laugh::laugh:
Hi guys I'll share tutorial how to Root Your Xperia M2 Single & Dual
I just n00bs here, need to share my knowledge
4.3 JELLY BEAN
LOCKED BOOTLOADER
Using Towel Root (Download) download & click Root, Your device will rebooted. After that download SuperSU in Play Store.
UNLOCK BOOTLOADER
Just Download The Recovery For Your Device (Single or Dual) and Download SuperSU.zip and flash the zip You get rooted fast!!
4.4 KITKAT
LOCKED BOOTLOADER
1. Downgrade to JB, Root your Phone using Towel Root in Jelly Bean
2. Update via OTA to KK 4.4.2 or KK 4.4.4 whatever you need (4.4.4 is recommended)
3. In this process, don't try to install or uninstall anything
4. Wait for booting finish
5. Install latest SuperSU from Play Store
6. Open Flashtool in PC
7. Connect your phone to PC
8. Now flashtool will describe your phone information, then click Root Tab in top, after that choose force root by TowelRoot
UNLOCK BOOTLOADER
1. Flash FTF 4.4 Kitkat
2. Flash CWM Kernel (Whatever it's for 4.3 or 4.4) You must get booted to CWM only
3. Download & Flash SuperSU.zip
4. Power Off & Flash Kernel 4.4 From FTF
5. You can find how to fix mount system here
If you have notifications from SuperSU that notice binary needs update, just choose in Normal mode, don't try in CWM/TWRP mode!
Hit Thanks if I helped You :victory:

Tested on M2 (D2305) 18.0.A.1.30. Both ways work stable. Sorry for my bad English

mjckey said:
Tested on M2 (D2305) 18.0.A.1.30. Both ways work stable. Sorry for my bad English
Click to expand...
Click to collapse
OK Bro thanks for feedback:fingers-crossed:

of course its work! :fingers-crossed:

Dickey Kid'deviel said:
of course its work! :fingers-crossed:
Click to expand...
Click to collapse
Hi owner icb
How about v4 :fingers-crossed:

Dickey Kid'deviel said:
of course its work! :fingers-crossed:
Click to expand...
Click to collapse
Yep

mrguru said:
Hi owner icb
How about v4 :fingers-crossed:
Click to expand...
Click to collapse
what is icb? i dont know about that

Dickey Kid'deviel said:
what is icb? i dont know about that
Click to expand...
Click to collapse
In my Country, ICB is a BANK not Custom ROM

still not working on kitkat 4.4.2 bro

@Bin4ry @DooMLoRD kitkat root 4.4.2 Update please

From the towelroot thread:
"..towelroot used a specific vulnerability in kernels dated before June 3. If your kernel is dated after June 3, the vulnerability has been patched and there is nothing GeoHot can "fix" to make towelroot work on your device.."
Click to expand...
Click to collapse
Looks like the kernel for the M2 KitKat update has this fixed. Too bad; might stay on 4.3 Jelly Bean for a while. I just can't give up root access and Xposed Framework.
:silly:

Naufal Sidik said:
4.4 KITKAT
UNLOCK BOOTLOADER
Downgrade Your M2 to 4.3 JB, do root method like Root For 4.3 JB. Flash FTF Kitkat with exclude Kernel.sin & Loader.sin. Very Important!! Don't do Wipe Cache & Data!! Then reboot to homescreen you will get Root!! You can find how to fix mount system here
Click to expand...
Click to collapse
Which part of this makes it impossible to use it on a locked bootloader? Also, I don't seem to be able to untick flashing of loader.sin in flashtool. Did you mean remove it from .ftf?

Hello,
Does the author of this method root KK, may explain how he was able to make a flash FTF KK (18.3.C.0.37) without kernel.sin and loader.sin ????
Me after this operation the phone at all is not "wake"
Please write exactly step by step how this done.
A loader.sin and kernel.sin I was able to remove the FTF using rar
Because I do not see the possibility of removing loader.sin by flashtool.
Also, this method presented here, unfortunately, did not work.
Back to JB.
In spite of everything thank you to the author's guide to root for the KK .
Regards.
*Written by Google Translate

This is what I'm getting as well. I thought it was because of the bootloader, but yours is unlocked so... The instructions for KK are clearly unclear (no pun intended)

i make easy root for all xpreia M2.
but i need cwm for install this.
any body have cwm or kernel with cwm for kitkat???????
http://www.mediafire.com/download/3chd81anczin4g2/root1.zip
.

alinolaw71 said:
i make easy root for all xpreia M2.
but i need cwm for install this.
any body have cwm or kernel with cwm for kitkat???????
http://www.mediafire.com/download/3chd81anczin4g2/root1.zip
.
Click to expand...
Click to collapse
AFAIK, I don't think there is cwm for KK...
also, does this allow us to mount R/W?

so is your root for unlocked bootloaders only ,or for all ,and have you tested it .alinolaw71

StardustGeass said:
AFAIK, I don't think there is cwm for KK...
also, does this allow us to mount R/W?
Click to expand...
Click to collapse
yup bro.
.
---------- Post added at 06:44 PM ---------- Previous post was at 06:42 PM ----------
wrtease5865 said:
so is your root for unlocked bootloaders only ,or for all ,and have you tested it .alinolaw71
Click to expand...
Click to collapse
this mod for all device with lock and unlock bl.
.

so does it give full root .and what about ndr utils .any news on cwm for us on d2303 kk .also the root give full right on kitkat

alinolaw71 said:
i make easy root for all xpreia M2.
but i need cwm for install this.
any body have cwm or kernel with cwm for kitkat???????
http://www.mediafire.com/download/3chd81anczin4g2/root1.zip
.
Click to expand...
Click to collapse
How to install it ?????
With CWM - of course, no problem, but there is no CWM for the [2303] so as flash .....?

[D2302][4.4.4] Kernel With CWM Recovery 6.0.5.1 for M2 Dual 18.3.1.B.0.18

THIS SOFTWARE NEEDS UNLOCKED BOOTLODER
http://unlockbootloader.sonymobile.com/
Kernel for 18.3.B.0.31(4.4.2) & 18.3.1.B.0.18(4.4.4) fimware with CWM & Ric is diasbled for full root.
Flashing instructions:
*** Download the file & renamed it to boot.img
put the boot.img file in fastboot directory.
Turn OFF your M2 dual and plug in via USB with VOL+ key pressed. Blue LED should blink.
Open terminal/CMD, go to to dir with boot.img and type:
fastboot flash boot boot.img​
Click to expand...
Click to collapse
OR
Flash with Flastool
Download New l 18.3.1.B.0.18 Kernel:
Click Here​
DOWNLOAD .31 Kernel
How to Root
Install Kernel with CWM above.
download the latest SuperSU update.zip from: http://download.chainfire.eu/supersu and save on your SD card
reboot into recovery and flash the supersu package.
reboot your device​
Credits for kernel: freack_v
Original kernelthread

Can you make it for Xperia M2 D2306 please? We need at least a working CWM so we can test and help any developer to test ROM and mods. I can try to help providing files. Thanks in advance.

macabrocabral said:
Can you make it for Xperia M2 D2306 please? We need at least a working CWM so we can test and help any developer to test ROM and mods. I can try to help providing files. Thanks in advance.
Click to expand...
Click to collapse
Sorry mate. i've d2302 & i can only support that. i can only help in those things which are common i both devices.

nilimahona said:
THIS SOFTWARE NEEDS UNLOCKED BOOTLODER
http://unlockbootloader.sonymobile.com/
This is from Stock 18.3.B.0.31 fimware with CWM 6.0.4.6 from DooMLoRD & Ric is diasbled.
Flashing instructions:
*** Download the file & renamed it to boot.img
put the boot.img file in fastboot directory.
Turn OFF your M2 dual and plug in via USB with VOL+ key pressed. Blue LED should blink.
Open terminal/CMD, go to to dir with boot.img and type:
​
OR
Flash with Flastool
DOWNLOAD
How to Root
Install Kernel with CWM above.
download the latest SuperSU update.zip from: http://download.chainfire.eu/supersu and save on your SD card
reboot into recovery and flash the supersu package.
reboot your device​
Click to expand...
Click to collapse
U R AWESOME ric is disabled cwm running and system working fine I was looking for that for 2 months :good::good::good::good::good::good::good::good::good:

Please pack for version 18.3.1.B.0.18 too!

Nice :good:
waiting for 18.3.1.B.0.18 :angel:

Thanks for the quick response!!
Really awesome work!

It is not good to assign someone else currently. My kernel for their outstanding, and I can prove that it's mine.

quick response :good::good::good:

Amor Cbr said:
quick response :good::good::good:
Click to expand...
Click to collapse
Work on D2305 .. thanks bro :good::good:

thanks
Work on my D2302 with 18.3.1.B.0.18(4.4.4)

Bro please make kernel with CMW for D2303 firmware .22 latest. Need kernel with CMW.
Thanks.

[Request]
Needed deodexer and zipalin for D2302 kitkat 4.4.4 pleasee..

working great. thanks

johnsamte said:
Needed deodexer and zipalin for D2302 kitkat 4.4.4 pleasee..
Click to expand...
Click to collapse
For deodexing ROM, you can do it by your own.
Follow this link for instruction. Credits goes to creator.
http://forum.xda-developers.com/showthread.php?t=2713329
Thanks

hello all
I just bought this device. And I don't want to unlock boot loader quite yet. My problem is flashtool is not installing drivers for my device. It always says drivers need to be installed. My previous device was xperia u so i know little details that noobs encounter so please help me.

thank you, sir. awesome

Vtrendzzy said:
hello all
I just bought this device. And I don't want to unlock boot loader quite yet. My problem is flashtool is not installing drivers for my device. It always says drivers need to be installed. My previous device was xperia u so i know little details that noobs encounter so please help me.
Click to expand...
Click to collapse
U can use adbdriverInstaller to install the driver.

Is possible make this for LockedBootloader?.. I Have 4.4.4 LockedBoot disable ric - full access root

noob question
hi all,
can ayone tell me how to : "go to to dir with boot.img and type:"
Yes, I know this is a noob question. so please help me.
thanks.

[Q] Official Lollipop System R/W?

Hi all!
Is there any way to regain system R/W access on stock lollipop rom?
Or is there any "fixed" flashable prerooted ROM to download?
I was on rooted 4.4 LB and flashed this rom http://forum.xda-developers.com/z3/development/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361 , ROOT is working fine without system R/W access so i cannot edit build.prop
Also, since recovery isnt working anymore it is quite difficult to revert to prevous 4.4 ROM.

"Turn off mount namespace, reboot, reinstall your choice of file explorer" doesent work for me, i use root explorer.
Any ideas?

mad_max911 said:
Hi all!
Is there any way to regain system R/W access on stock lollipop rom?
Or is there any "fixed" flashable prerooted ROM to download?
I was on rooted 4.4 LB and flashed this rom http://forum.xda-developers.com/z3/development/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361 , ROOT is working fine without system R/W access so i cannot edit build.prop
Also, since recovery isnt working anymore it is quite difficult to revert to prevous 4.4 ROM.
Click to expand...
Click to collapse
You must have an unlocked bootloader
Justo go here: http://nut.xperia-files.com/
Click on XZDualRecovery Kernel and download the proper kernel for your device. On Flashtool (PC/Mac) flash a previous kernel with recovery (just google it). After, boot your devie in recovery (it will not boot on system because of the kernel) and flash the file you have downloaded first. You should have R/W system access, but no recovery (kernel and recovery are links).
You can roll back to KitKat with flashtool

DJPops said:
You must have an unlocked bootloader
Justo go here: http://nut.xperia-files.com/
Click on XZDualRecovery Kernel and download the proper kernel for your device. On Flashtool (PC/Mac) flash a previous kernel with recovery (just google it). After, boot your devie in recovery (it will not boot on system because of the kernel) and flash the file you have downloaded first. You should have R/W system access, but no recovery (kernel and recovery are links).
You can roll back to KitKat with flashtool
Click to expand...
Click to collapse
Yes, only problem is that my boot-loader is not unlock-able. Furthermore i would not unlock it anyway because of DRM and warranty.
So, i am waiting for solution on LB and lollipop. Kitkat has full RW access to system.

mad_max911 said:
Yes, only problem is that my boot-loader is not unlock-able. Furthermore i would not unlock it anyway because of DRM and warranty.
So, i am waiting for solution on LB and lollipop. Kitkat has full RW access to system.
Click to expand...
Click to collapse
So I'm sorry, IDK what to do with LB...

DJPops said:
You must have an unlocked bootloader
Justo go here: http://nut.xperia-files.com/
Click on XZDualRecovery Kernel and download the proper kernel for your device. On Flashtool (PC/Mac) flash a previous kernel with recovery (just google it). After, boot your devie in recovery (it will not boot on system because of the kernel) and flash the file you have downloaded first. You should have R/W system access, but no recovery (kernel and recovery are links).
You can roll back to KitKat with flashtool
Click to expand...
Click to collapse
Not true. I am on locked bootloader and have full system rw in lollipop.
Sent from my D6603 using XDA Free mobile app

ondrejvaroscak said:
Not true. I am on locked bootloader and have full system rw in lollipop.
Sent from my D6603 using XDA Free mobile app
Click to expand...
Click to collapse
I hope somebody figure this out...
Some are saying you need unlocked BL and for somebody you don't...

mad_max911 said:
I hope somebody figure this out...
Some are saying you need unlocked BL and for somebody you don't...
Click to expand...
Click to collapse
My experience is that usually people are running into problems when:
1. Not following instructions properly
2. Altering instructions
3. Not doing clean wipes or installs
Sent from my D6603 using XDA Free mobile app

I had the problem, that /system was shown as mounted r/w, but after a reboot all changes were gone. I had to lower the SELinux policy to permissive, after that all changes were permanent. However, you have to do that every time you reboot, so if some add-ons (like XPosed framework) need /system r/w at boot time, you have to alter the kernel package. Since I went back to 4.4.4, I can't help you with the latter one.
Forget that, just try this:
http://forum.xda-developers.com/z3-...-sgp621-lollipop-23-1-0-690-noba-ftf-t3058400

Upgrade from 32.2.A.0.305 to 32.2.A.5.11

Hi!
Did anybody managed to upgrade from unlocked an rooted 32.2.A.0.305 to 32.2.A.5.11?!
I tried it at least five times and I failed.
Everything seems to work, except unlocking the bootloader and gaining root access.
1) Flashed the new firmware with Flashtool (without TA partitions!).
2) Tried to unlock the bootloader but this is not working as expected.
The service menu tells me that I can unlock my bootloader.
But when I try to unlock it via fastboot I am getting a message, that my device is already rooted/unlocked.
FAILED (remote: Device is already rooted)
So I locked it again using the "Sony Mobile Flasher". After a reboot the "fastboot -i 0x0fce oem unlock 0x....." command gives me an OKAY and after the next reboot my device is automatically wiped.
But the service menu still tells me that my bootloader is unlockable and not that is unlocked!
Installing the patched kernel and TWRP seems to work because fastboot returns an "OKAY".
But neither I can access the TWRP recovery (LED won't get amber) nor the device is rooted.
Okay.... does anybody can give me a hint, how to root the current FW version?!

Ok, I downgraded to 32.2.A.0.305 and everything is working fine again!
I have root access and I can boot into recovery!
What is wrong with 32.2.A.5.11?

im on .I 1 , bootloader unlocked , rooted
got same error as u
device already rooted
so i just didnt check what services menu say and rooted my z5

mohalazio said:
so i just didnt check what services menu say and rooted my z5
Click to expand...
Click to collapse
How did you do this?
I flashed a modifyed kernel (dm-verity: off, RIC: off, TWRP: no, DRM fix: yes, busybox: no) with
fastboot flash boot boot.img
But I cannot install SuperSU from PlayStore.
It sais that the su binary is missing and that it cannot be installed.
So, next I tried to install TWRP with
fastboot install recovery twrp-3.0.2-0-E6653-20160504.img
But on a reboot the LED is not getting amber and I cannot enter recovery.
It seems that neither the patched kernel nor the recovery has been installed. Even though fastboot returned with an OKAY for both install commands!
First I thought that something went wrong patching the kernel with rootkernel5.0. So I downloaded and flashed an already patched one for 32.2.A.5.11. But I have still no root access!
From loud despair I flashed the SLIMX REBORN ROM (1.17BEATMODE). Now I have full root access again, but on 32.2.A.0.305 with my old problems: a) The SU binary cannot be updated from within SuperSU app and b) SONY annoys me to update to the new version every day.
I can't believe that it is not possible to root the new version or that it just doesn't work for my device.

u missed 1 small detail
first : download flashable supersu ( supersu. zip )
then put it in rootkernel folder
build the kernel
u will get extra question asking u to install supersu ( the answer is yes )
flash ur boot. img
thats it

Hi!
I know that I can integrate SuperSU into the kernel image.
But I cannot upgrade a su binary installed that way by using the SuperSU app from playstore.
The PlayStore / TWRP method for SuperSU works like a charm on 32.2.A.0.305.
But I will give it a seventh try with "AndroPlusKernel Permissive v42" instead of the patched stock kernel.
mohalazio said:
u missed 1 small detail
first : download flashable supersu ( supersu. zip )
then put it in rootkernel folder
Click to expand...
Click to collapse

Okay, I am giving up for now!
Buying a SONY phone was one of my worst decisions in 2016.
After a Samsung Galaxy Nexus and a HTC One M8 the SONY Z5 drives me crazy.
After installing 32.2.A.5.11, SuperSU 2.79 and AndroPlus kernel v42 I still have a phone that is unrooted!
And TWRP is reporting the unknown partition "/keymaster"....

so u have supersu installed and working ?
if thats the case i also have binary update problem when updating it from playstore
---------- Post added at 10:53 PM ---------- Previous post was at 10:49 PM ----------
i would suggest one way
first u have 2 IMEI
try unlocking the bootloader with the the other IMEI
UNLOCK using flashtool
then root kernel
---------- Post added at 10:58 PM ---------- Previous post was at 10:53 PM ----------
if things didnt work out
use this rom on .305
http://forum.xda-developers.com/xpe...m-32-2-0-305-e6653-e6683-1-0-0-t3498626/page1

mohalazio said:
so u have supersu installed and working ?
Click to expand...
Click to collapse
I managed to install it via TWRP but as you can see "Root Check" says that my device is not rooted and that the SU binary cannot be found! The same error with the SuperSU app itself. The message means that the su binary cannot be found and SuperSU is not able to install it!
mohalazio said:
i would suggest one way
first u have 2 IMEI
try unlocking the bootloader with the the other IMEI
UNLOCK using flashtool
then root kernel
Click to expand...
Click to collapse
Two IMEI?! My Z5 is the single SIM model.

what supersu version u used?

mohalazio said:
what supersu version u used?
Click to expand...
Click to collapse
SuperSU-v2.79-201612051815

try 2.78

Still not working!
Damn, why I am the only person on this planet that fails to root its XPeria Z5?!

good news for u
new rom based on .11
http://forum.xda-developers.com/xpe...m-32-2-0-305-e6653-e6683-1-0-0-t3498626/page1

Thank you!!
I'll give it a try!

[Guide] Root Oppo R9tm/X9009 F1 Plus Marshmallow D.01

Prerequisites: root permission.
Before to start make a full backup of everything! I cannot warranty this method is working in every phone, actually tested only with the r9tm variant.
With the X9009 and r9 variant must be tested!!
Make attention!! This procedure can brick your device!!
Procedure:
1. Flash this TWRP with Rashr. http://www.mediafire.com/file/e76ptigzjcg4i07/UNOFFICIAL-TWRP-3.1.1_X9009.img
2. Reboot into recovery. (At the first boot the screen can remain black, to solve just press the power button 2 times, then in settings change the brightness different from 100%. )
3. Connect the usb cable and copy the marshmallow zip (R9 variant) http://www.oppo.com/au/supports/announcement/test
4. Copy this file to fix the systemui root warning http://www.mediafire.com/file/9nxmc64x4gm6xro/SystemUI_OppoF1Plus_X9009_LP_MM_TWRP.zip
5. Copy the latest Supersu zip installer (tested v82) http://www.supersu.com/download
6. Backup Nvram and Nvdata
7 Flash the marshmallow rom (Do not consider the final error about the wipe data)
8. make a full wipe data (advanced wipe: select data, cache and dalvik)
9. Flash the supersu
10. Flash SysteUI fix
11. Reboot (First boot will take 10 minutes)
12. If the IMEI is missing, reboot in recovery and restore the nvram and nvdata
13. Enjoy
Release: beta1

Twrp is very good, root is perfect with modified systemui. But I have a nonsense problem that black screen after screen unlock. And I know that it is boot.img related issue. When i flash r9m mm boot.img it is working but no sim. And both r9tm and x9009 6.0 mm firmware, fingerprint is not working.
On 5.1 x9009 i have no issue all is working perfect.

I dont know the threater point. He said Prerequisites: root permission
But everyone here want to root
But he said that for what? ?

xk3v1lx said:
I dont know the threater point. He said Prerequisites: root permission
But everyone here want to root
But he said that for what?
Click to expand...
Click to collapse
Saying that downgrade your system, root your device than reupdate with this procedure, if you want root on marshmallow.
or flash unofficial TWRP3.1 recovery via flash tool , than finish Luxios's tutorial, this is the best way

Oh i see
Thanks
But now how to downgrade F1 plus? Oppo locked this feature that i am not able to root it ?
Line: ttddzz

https://vnrom.net/2016/10/free-rom-stock-oppo-f1-plus-x9009-flashtool-ok/
here is a flashtool rom for F1 Plus download and flash it
https://forum.xda-developers.com/op...-f1plus-irgent-spflashtool-rom-t3516145/page9
and here is a tutorial about it(you dont need to change META.INF).

emreagacli said:
https://vnrom.net/2016/10/free-rom-stock-oppo-f1-plus-x9009-flashtool-ok/
here is a flashtool rom for F1 Plus download and flash it
https://forum.xda-developers.com/op...-f1plus-irgent-spflashtool-rom-t3516145/page9
and here is a tutorial about it(you dont need to change META.INF).
Click to expand...
Click to collapse
Sorry
It getting error 0xc0020029
...Vietnamese User...

Use modified mtk_allinone_da.bin . this is the most important think to flash.

I dont know how to modified it ?
...Vietnamese User...

if you read the subject , you don't need to modify, it is modified.
4_ Use this custom DA file: http://www.mediafire.com/file/69l8nxs22r24m7f/MTK_AllInOne_DA.bin

emreagacli said:
if you read the subject , you don't need to modify, it is modified.
4_ Use this custom DA file: http://www.mediafire.com/file/69l8nxs22r24m7f/MTK_AllInOne_DA.bin
Click to expand...
Click to collapse
Thanks
Let me try ?
...Vietnamese User...

has anyone tried it?

I am using 27.05 firmware with root on my r9tm device. I have flashed Luxios's recovery via şp flash tool than installed latest supersu via twrp. Systemui trick didnt work fir me but no need to it on 27.05 firmware.

emreagacli said:
I am using 27.05 firmware with root on my r9tm device. I have flashed Luxios's recovery via şp flash tool than installed latest supersu via twrp. Systemui trick didnt work fir me but no need to it on 27.05 firmware.
Click to expand...
Click to collapse
is that mm? or lp?

x.nallydb28 said:
has anyone tried it?
Click to expand...
Click to collapse
My X9009 was bricked (only virbrate when start) due to flash in a wrong way (Format and Download)
I sent it to warranty center and wait
They said "main error"
? nothing to say...
PS: i did that before trying to use modified DA bin. I will try after take it back
...Vietnamese User...

emreagacli said:
I am using 27.05 firmware with root on my r9tm device. I have flashed Luxios's recovery via şp flash tool than installed latest supersu via twrp. Systemui trick didnt work fir me but no need to it on 27.05 firmware.
Click to expand...
Click to collapse
xk3v1lx said:
My X9009 was bricked (only virbrate when start) due to flash in a wrong way (Format and Download)
I sent it to warranty center and wait
They said "main error"
nothing to say...
PS: i did that before trying to use modified DA bin. I will try after take it back
...Vietnamese User...
Click to expand...
Click to collapse
Sorry to hear that mate. Still waiting to someone who have already tried this procedure.

İt was not problem ypu could reflash via custom da file.
---------- Post added at 02:26 PM ---------- Previous post was at 02:01 PM ----------
x.nallydb28 said:
is that mm? or lp?
Click to expand...
Click to collapse
Lp

emreagacli said:
İt was not problem ypu could reflash via custom da file.
---------- Post added at 02:26 PM ---------- Previous post was at 02:01 PM ----------
Lp
Click to expand...
Click to collapse
So I can still downgrade my x9009EX to LP??

I am making it every time. The most important thing is , using custom da.bin file.

emreagacli said:
I am making it every time. The most important thing is , using custom da.bin file.
Click to expand...
Click to collapse
I'm on MM now, how can I flash it? Do I need to flash something to activate the fastboot on my F1 Plus?