About:
This windows application will have you connect your Android device to your windows pc and allow you to show or hide android apps. Root is not required to do this. All of these commands can be done manually as well. This application allows you to do so with just a few clicks! Clear out your app drawer by hiding apps you do not use!
Disclaimer:
I am not responsible for what you do with this application, you are using it at your own risk and you assume all liabilities.
Version:
1.0 – Initial Release
Needed:
Windows PC (at least Windows 7 +)
Android Device with drivers installed
USB cable for device to pc
Directions:
1. Connect your device to your pc
a. Ensure appropriate drivers are already installed
2. Open the WinADB.exe application and then click the “Connect Device and Click Here to Start” button.
3. From there, you should notice device information populate in the application.
a. The “Show/Hide Apps” and “Reboot” options will become active.
4. To show/hide apps, click the “Show ALL” button and give it a few moments to populate the list.
a. This will not remove apps, it will only hide them from your app drawer!
b. Once the list loads, you can then select (one app at a time) an app by clicking it.
c. To hide it, click the “HIDE” button.
d. If you need to show the app again later, you may need to click on the “Show Uninstalled” button to see it again. You can then select the app from that list and click the “SHOW” button to see it again.
Depending on your version of Android and the device you have, not all features may work or work as intended. Please keep this in mind. I have tested this application directly with an ATT Samsung Galaxy S5 (rooted) and an ATT Asus MemoPad 7 LTE (not rooted) and has worked for both with no issues. All feedback is welcome!
Download:
1. Download and unzip the package from: https://drive.google.com/open?id=0B0fKccJIuWsnVUJTeVhrMmx5Sms
2. View the Read Me file before using.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Hey guys!
Here comes a little howto download any free (non-paid) apps from Google Market/Play Store with the PC Chrome Browser.
1. pls download and install the Chrome Browser
2. pls download the attachment and unzip it to "download_app.crx"
3. open your Chrome Browser and drag the *.crx into the browser window
4. install the extension
5. after this you will get a new window
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. now you must disable SSL error warnings (its very important!)
7a. If you're on MS Windows pls follow this:
* right klick on Chrome shortcut
* select Properties
* add --ignore-certificate-errors @ the end of Target field
* now press OK
* restart Chrome
Pls note:
Dont forget a [Space] between ...chrome.exe and --ignore-certificate-errors
7b. If you're on Linux pls follow this:
* make a shortcut of Chrome on your desktop
* right klick on it and choose Properties
* now find follow line...
...and add this line --ignore-certificate-errors
Pls note:
Dont forget a [Space] between .../google/chrome %U and --ignore-certificate-errors
* close it and restart Chrome
8. now open Chrome and find in the menu/tools/extensions this:
9. klick on options
10. login your GoogleAccount
11. to find your Device ID...take your phone and type in the dialpad *#*#8255#*#*
12. looking for your Device ID and type it in the field (without "-"!)
13. login and save settings
14. now you can download any free app from Google Market.
15. open the app description
16. note and press on the green droid in the adress line
Thats it
Thanks, works as a charm.
Does it matter what you choose on 'Sim operator'?
And i hope this app doesn't hi-jack my google account.
Cheers.
Your "question" is justified.
Some reputable vendors publish this type of download.
I think yes it is safe.
Source of Chrome extension.
I use the Sim OP "USA - T-Mobile" because then all the apps appear.
Some users know the "Market Enabler" for the Market in our phone. This is a similar principle.
Greets
I use two step verification on my Google account. I think that is a good thing to use for everyone. Then you don't have to use your main password for applications that need your password.
Skickat från min GT-N7000 via Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Connect Sony DriveLink (MirrorLink) With GS4
Full credit to AuRoN89 for uploading HERE.
Intro
This is a tutorial for how to use Sony's car system(s) to their maximum potential. I cant guarantee this works with every model, however, because I only have the XAV601BT (seen in picture above). Before you do this, you need to make sure the latest firmware is installed. For a guide on that CLICK HERE.(NOTE: This link is for the XAV601BT. If you have a different device, go HERE, enter your model number on the bottom left, and click "Update to the Latest Firmware")
Step 1: Enable "Unknown Sources"
From the Home screen, tap Apps > Settings > More tab > Security.
Tap Unknown Sources.
A check mark is displayed to indicate it is active.
This is to make your phone allow the instillation of the modded DriveLink.
Step 2: Download the Mod
On your phone, go to the following link (I will post mirrors at the bottom):
www.sestogomme.it/drive_link/DriveLink.apk
Click to expand...
Click to collapse
Step 3: Install
Now, from the Home screen, tap Apps > Downloads > DriveLink.apk.
You should see this:
Scroll to the bottom, and hit Install.
Note: This app does not cost money. The reason it says that is because it has the ability to answer and make phone calls/texts.
Step 4: Connect to USB
Finally, you need to open MirrorLink on your system. Connect your phone (use your charger cable), and the DriveLink application should instantly start.
Note: You will still get an error on the system when you plug your phone in saying the phone isn't compatible, but you can just ignore it.
Conclusion
I really hope this could help! I spent a while troubleshooting this problem, and luckily found a working link by AuRoN89. It managed to save me money on an additional navigation system. If you have any questions or concerns about this, I will try my best to help. I didn't make this modded version, so I can't answer any questions about what was changed. This guide was simply made as a resource for other people who couldn't find any information on this.
Mirrors
Hey guys,
Big thanks to @autoprime for mentioning this info on this in the general G4 forum. Figured I'd sum up the steps and repost in our sub-forum for anybody who may be struggling.
If you're like me, you're waiting on root and don't want to accidentally take that new OTA update that was pushed out about a week ago. This OTA has been found to prevent rolling back to previous versions of android, and may also block some/many of the root methods that the developers are preparing to release to us.
If System Update is constantly bugging you to update, follow the directions below:
1) Enable USB Debugging
-Go to About phone and tap on Build number 10 times to enable Dev Options
-Enter Developer Options and enable USB Debugging
2) Download and Install the Debloater tool (this happens on your computer)
-Windows http://rootjunkysdl.com/getdownload.php?file=Gates/DeBloater/Debloater-setup-v3.85.exe
-OSX http://rootjunkysdl.com/getdownload.php?file=Gates/DeBloater/Debloater.v.3.85.dmg
3) Connect your phone via USB. Make sure to install any drivers needed
4) Watch for pop up requesting ADB Access on your phone
5) Launch the Debloater tool
6) Select OK on the popup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7) Click the top left button
8) Find LGDMSClient.apk and put a checkmark next to it. Then select Apply at the top
Congratulations! You no longer have to worry about pocket-updating your G4 and not being able to root down the road!
I just got the G4 yesterday. I didn't do my homework first and did the updates. Am I screwed when it comes time to root? (If ever)
Delete
I just went into Settings/Apps/Google Services Framework and unselected Show Notifications. This took the warning out of the Notification Bar.
Not certain yet in the event that it will keep the popup for the framework OTA overhaul.
Deleted
I saw on a website that there were other things listed in addition to what you blocked to avoid OTA updates. Should these be taken into consideration?
LGUpdateCenter.apk
LGFOTA.apk
LGLDB.apk
EDIT: I used that debloater tool and disabled that stuff. I've had no problems with the phone after that except for the AT&T bloatware.
Hello guys since the android 6.0 update is out for this phone and many seemed to have issues upgrading it, i wrote down a guide on how to update it . Firstly there are two ways you can update your phone.
1) Via the wireless update app
2) Manually flashing the firmware
Steps:
1) Find the wireless update app on your phone and press check
2) You will be prompted to download the update file
3) Download.Install.Done.
If for some reason the first method does NOT work you can try this
1) Download the firmware file from here https://mega.nz/#!PQVWDaLZ!2ituEPLWpcAkbz9dR6dNk3E3rnl2z8YNELQ7xcYi7t0
2) Download the flash tool from here https://mega.nz/#!7AcjGCLY!5LtavmoUaz8N_GzRwJqhD9tWwRDapplAKu7TMmON7F4
3) Now open the flash tool by double clicking the SPMultiPortFlashDownloadProject.exe file
4) File -> Open Download Agent File and open this file MTK_AllInOne_DA.bin from this folder MDT_V1620_ForUpgrade
5) Click the button Scatter File and select the file MT6735M_Android_scatter which is located in
OUKITEL_K10000_V8.0_20160620 folder
6) Click Scan
7) Long press volume (+) key on your device (phone in power off state) and connect it to your PC. When green bar shows, scan successfully disconnect your phone.
8) Click Stop All and then Start All, when the small window finishes connect again your phone to the PC and the update will start automatically.
9) When the first line goes grey (COM 4 + COM 3) it means its completed.
Voila!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PS: Please let me know if i am allowed to post the download links, if not i will upload them as attachments here!
Thank you.
Bypass Google Account Problem with K10000
Hi
After auto-update my Oukitel K10000 asks for google account I do not have (I have tried every known to me email but nothing happend). I have read all internet, have seen a lot of films - nothing.
1.I cannot enter the developer option (to enable USB) because tapping the build number does not work - ANY sugestions? or step-by-step method
2.I cannot install Quick Shortcut Maker Apk in any mode.
PLEASE help
Flash tool is down.
Edit:
Found alternatives here http://spmdttool.com/category/download
v5 is buggy.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
I'm not the one who build this method I just wanna share the only way I found to downgrade this phone to android stock. I'm not responsible for any brick or bad use you may have with your phone.
Requirements:
* Bootloader Unlocked
* Motorola Drivers Installed on your PC.
* USB Debugging Enabled on your Device
* A Moto G8+ XT2019-2 Compatible with this firmware version
(All your information and data will be erased from your device. Please make a backup before proceed).
Your can download the firmware build without bloatware or pre-installed apps from my one drive storage here
After decompressing the file your can read the "DOHA" .txt to see all details of this android 9 build. Also you can right click to "Flash ROM" and "edit" to check all command line on the main file.
The last step its connect your Moto G8+ on fastboot mode to your PC and double click to "Flash ROM.bat" a CMD window automatically open to flash your device. DO NOT CLOSE THE WINDOW. Wait until finish and the device will be downgrade to android 9 stock.
If everything was fine the CMD window will automatically close and the device will be restart.
Additional Notes:
* With this firmware version will NOT work some moto gestures.
* The system goes more smoothly and apps open more faster.
* Battery life improved a lot more compared to android 10
* You can still receive OTA updates
Does it work if I have latest update with Android 10 version? QPIS30.28-Q3-28-26-4-1-7 (amxmx)
micklov said:
Does it work if I have latest update with Android 10 version? QPIS30.28-Q3-28-26-4-1-7 (amxmx)
Click to expand...
Click to collapse
Sorry for the late reply.
I was on android 10 at the moment of flashing the rom and since then i'm still using it. Not problem at all if u follow the steps on this post.