{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Connect Sony DriveLink (MirrorLink) With GS4
Full credit to AuRoN89 for uploading HERE.
Intro
This is a tutorial for how to use Sony's car system(s) to their maximum potential. I cant guarantee this works with every model, however, because I only have the XAV601BT (seen in picture above). Before you do this, you need to make sure the latest firmware is installed. For a guide on that CLICK HERE.(NOTE: This link is for the XAV601BT. If you have a different device, go HERE, enter your model number on the bottom left, and click "Update to the Latest Firmware")
Step 1: Enable "Unknown Sources"
From the Home screen, tap Apps > Settings > More tab > Security.
Tap Unknown Sources.
A check mark is displayed to indicate it is active.
This is to make your phone allow the instillation of the modded DriveLink.
Step 2: Download the Mod
On your phone, go to the following link (I will post mirrors at the bottom):
www.sestogomme.it/drive_link/DriveLink.apk
Click to expand...
Click to collapse
Step 3: Install
Now, from the Home screen, tap Apps > Downloads > DriveLink.apk.
You should see this:
Scroll to the bottom, and hit Install.
Note: This app does not cost money. The reason it says that is because it has the ability to answer and make phone calls/texts.
Step 4: Connect to USB
Finally, you need to open MirrorLink on your system. Connect your phone (use your charger cable), and the DriveLink application should instantly start.
Note: You will still get an error on the system when you plug your phone in saying the phone isn't compatible, but you can just ignore it.
Conclusion
I really hope this could help! I spent a while troubleshooting this problem, and luckily found a working link by AuRoN89. It managed to save me money on an additional navigation system. If you have any questions or concerns about this, I will try my best to help. I didn't make this modded version, so I can't answer any questions about what was changed. This guide was simply made as a resource for other people who couldn't find any information on this.
Mirrors
Related
Hi bro, i just wanna help those people who want to root their phone without downgrading. It tested, and work on my Miro on stock firmware 11.0.A.5.5 Okay, all you need is :
1. UnlockRoot (You can download it here)
2. Xperia Miro / Xperia Device (I think this guide will work for most 2011/2012 xperia devices)
3. PdaNet (Needed for Xperia driver. Download here)
ROOTING YOUR DEVICE MAY VOID YOUR WARRANTY!
The steps is :
1. go to your setting phone, and check the USB Debugging in Developers section
2. still at the setting, go to application section, and check the Unknown Source
3. Download the UnlockRoot software, and extract it.
4. Download the PdaNet, and install it. If PdaNet asked the device, select other. If you got this message, then click Install Anyway
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. If needed, restart your PC/laptop. (If you are in win7/win8, when you are in boot, push the F8 button, and then select Disable Driver Signature. And then install the PdaNet)
6. After restarting your PC, then plug your phone on.
7. Run the UnlockRoot software, and click root!
8. Cheers! Your phone is rooted, check your phone if there is a SuperSU app. If there is SuperSU app, you're successfully rooting your phone
Sorry, if you still got a question, you can post it here or PM me Sorry for my bad english, this is my second thread
Does it need internet for anything?
No, you dont need any internet connection after downloading those files. If you dont need PdaNet (PdaNet used to connect to the internet using your phone as modem), then exit it. Its ok
my device does connect
I follow ur all steps but its show ur device does not connect
Hey guys,
Big thanks to @autoprime for mentioning this info on this in the general G4 forum. Figured I'd sum up the steps and repost in our sub-forum for anybody who may be struggling.
If you're like me, you're waiting on root and don't want to accidentally take that new OTA update that was pushed out about a week ago. This OTA has been found to prevent rolling back to previous versions of android, and may also block some/many of the root methods that the developers are preparing to release to us.
If System Update is constantly bugging you to update, follow the directions below:
1) Enable USB Debugging
-Go to About phone and tap on Build number 10 times to enable Dev Options
-Enter Developer Options and enable USB Debugging
2) Download and Install the Debloater tool (this happens on your computer)
-Windows http://rootjunkysdl.com/getdownload.php?file=Gates/DeBloater/Debloater-setup-v3.85.exe
-OSX http://rootjunkysdl.com/getdownload.php?file=Gates/DeBloater/Debloater.v.3.85.dmg
3) Connect your phone via USB. Make sure to install any drivers needed
4) Watch for pop up requesting ADB Access on your phone
5) Launch the Debloater tool
6) Select OK on the popup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7) Click the top left button
8) Find LGDMSClient.apk and put a checkmark next to it. Then select Apply at the top
Congratulations! You no longer have to worry about pocket-updating your G4 and not being able to root down the road!
I just got the G4 yesterday. I didn't do my homework first and did the updates. Am I screwed when it comes time to root? (If ever)
Delete
I just went into Settings/Apps/Google Services Framework and unselected Show Notifications. This took the warning out of the Notification Bar.
Not certain yet in the event that it will keep the popup for the framework OTA overhaul.
Deleted
I saw on a website that there were other things listed in addition to what you blocked to avoid OTA updates. Should these be taken into consideration?
LGUpdateCenter.apk
LGFOTA.apk
LGLDB.apk
EDIT: I used that debloater tool and disabled that stuff. I've had no problems with the phone after that except for the AT&T bloatware.
Hello guys since the android 6.0 update is out for this phone and many seemed to have issues upgrading it, i wrote down a guide on how to update it . Firstly there are two ways you can update your phone.
1) Via the wireless update app
2) Manually flashing the firmware
Steps:
1) Find the wireless update app on your phone and press check
2) You will be prompted to download the update file
3) Download.Install.Done.
If for some reason the first method does NOT work you can try this
1) Download the firmware file from here https://mega.nz/#!PQVWDaLZ!2ituEPLWpcAkbz9dR6dNk3E3rnl2z8YNELQ7xcYi7t0
2) Download the flash tool from here https://mega.nz/#!7AcjGCLY!5LtavmoUaz8N_GzRwJqhD9tWwRDapplAKu7TMmON7F4
3) Now open the flash tool by double clicking the SPMultiPortFlashDownloadProject.exe file
4) File -> Open Download Agent File and open this file MTK_AllInOne_DA.bin from this folder MDT_V1620_ForUpgrade
5) Click the button Scatter File and select the file MT6735M_Android_scatter which is located in
OUKITEL_K10000_V8.0_20160620 folder
6) Click Scan
7) Long press volume (+) key on your device (phone in power off state) and connect it to your PC. When green bar shows, scan successfully disconnect your phone.
8) Click Stop All and then Start All, when the small window finishes connect again your phone to the PC and the update will start automatically.
9) When the first line goes grey (COM 4 + COM 3) it means its completed.
Voila!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PS: Please let me know if i am allowed to post the download links, if not i will upload them as attachments here!
Thank you.
Bypass Google Account Problem with K10000
Hi
After auto-update my Oukitel K10000 asks for google account I do not have (I have tried every known to me email but nothing happend). I have read all internet, have seen a lot of films - nothing.
1.I cannot enter the developer option (to enable USB) because tapping the build number does not work - ANY sugestions? or step-by-step method
2.I cannot install Quick Shortcut Maker Apk in any mode.
PLEASE help
Flash tool is down.
Edit:
Found alternatives here http://spmdttool.com/category/download
v5 is buggy.
About:
This windows application will have you connect your Android device to your windows pc and allow you to show or hide android apps. Root is not required to do this. All of these commands can be done manually as well. This application allows you to do so with just a few clicks! Clear out your app drawer by hiding apps you do not use!
Disclaimer:
I am not responsible for what you do with this application, you are using it at your own risk and you assume all liabilities.
Version:
1.0 – Initial Release
Needed:
Windows PC (at least Windows 7 +)
Android Device with drivers installed
USB cable for device to pc
Directions:
1. Connect your device to your pc
a. Ensure appropriate drivers are already installed
2. Open the WinADB.exe application and then click the “Connect Device and Click Here to Start” button.
3. From there, you should notice device information populate in the application.
a. The “Show/Hide Apps” and “Reboot” options will become active.
4. To show/hide apps, click the “Show ALL” button and give it a few moments to populate the list.
a. This will not remove apps, it will only hide them from your app drawer!
b. Once the list loads, you can then select (one app at a time) an app by clicking it.
c. To hide it, click the “HIDE” button.
d. If you need to show the app again later, you may need to click on the “Show Uninstalled” button to see it again. You can then select the app from that list and click the “SHOW” button to see it again.
Depending on your version of Android and the device you have, not all features may work or work as intended. Please keep this in mind. I have tested this application directly with an ATT Samsung Galaxy S5 (rooted) and an ATT Asus MemoPad 7 LTE (not rooted) and has worked for both with no issues. All feedback is welcome!
Download:
1. Download and unzip the package from: https://drive.google.com/open?id=0B0fKccJIuWsnVUJTeVhrMmx5Sms
2. View the Read Me file before using.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, I'm new to xda, it's true that I came before looking for ways to root my mobile, custom roms, etc.
But this is the first time I create a post (If this post does not go in this section please change it)
I'll explain what happened.
My mother-in-law about 1 year ago I give a BGH JOY X5 to my wife, this device has an android 5.1.
Question I wanted to download the google play store app called "DayDream" but it was not compatible with my android version, so I decided to change the android view to 7.0 with "Root Essentials" editing the build.prop, so it was, I edited it and it was successful.
After that, I decided to turn off and turn on the phone, but when I turned it off constantly "x application has stopped" so constantly with everything, I could not open any application, I decided to restore the factory values of the phone to see if that solved it but got worse...
Now turn on the phone, but after selecting a language, it is loading and the poster "x application has stopped" (with "x" I mean any, play services, messages, etc.)
Try entering the recovery mode, keeping the keys "Volume down + power" and I got a menu let's say "Chinese" started playing there and I just found this ...
BB Chip: MT6735
MS BOARD: ZTE_Blade_V580
And other information if I can attach image ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Down that puts ...
Android View: 7.0
SW See: BGH_Joy_X5_ARBGH_1.04
Custom Build Verno: unknown
And another info
Seeing this I decided to download a ZTE Blade v580 rom as it puts me there, but when it comes to connecting the phone does not recognize me and I can not flash it.
Download and install the Mediatek drivers (MTK) and recognize it
Enter the recovery mode and delete the cache and data from there and nothing, remains the same.
Is there any way to return the android to 5.1 that came?
Why the pc does not recognize the mobile?
Thank you so much.
Hi
Does download mode work