Database Info

[Q] Help Me

I try to upgrade to Jelly Bean Mini Project and successfully but after reboot only logo CM10 display continuously and can no longer be in recovery with CWM or update / Repair via PC Companion, I try to flash again but always fails because USB Debugging Off, "how to enable USB Debugging..?" ... Previous HH I already unlock the bootloader.Tks b4.(Sony Xperia Tipo Dual)

Hello,
Could you provide us with a little bit more information? Because I don't fully understand your question... So you are in a bootloop, and you can't recover with CWM?
And you say you can't flash because off USB debugging off? That isn't correct. Androxyde's flashtool works even for devices without USB debugging on!
And you can always try Sony Update Service. Perhaps that'll work.
Please give a little bit more information, so we can help you out! What have you tried? What is the problem with Flashtool? et cetera, et cetera...
Cheers, and good luck!

I suggest next time You use TWRP instead of CWM

Are you flashing with androxyde flashtool?
Sent from My XPERIA

To MatsPunt
I only use googletranlate .. Coz I'm Not Can English..
Sorry Senior new opportunity to reply ... Yes I'm in bootloop, and can not go in CWM because when I upgraded to JBMP (Jelly Bean Mini Project) via CWM I use format system.
I try again with flashtool v0.9.11.0 flah but never finish only and appear "- Device connected with USB debugging off
- For 2011 devices line, be sure you are not in MTP mode "
and I use "SUS" but did not success and the message "The phone contains modified software that can not be updated"
Thanks Senior b'4.
Please help me...
To tejasjani55
I use Xperia Flashing tool by Bin4ry Androxyde v0.9.11.0

Open flashtool
-Click flash
-select your ftf
-Wait for popup
-HOLD volume down and insert cable,still keep holding until process the process start
Sent from My tipo

I have tried
tejasjani55 said:
Open flashtool
-Click flash
-select your ftf
-Wait for popup
-HOLD volume down and insert cable,still keep holding until process the process start
Sent from My tipo
Click to expand...
Click to collapse
===================================================================
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Flashed?
hit thanks if I helped you

EASIEST WAY TO ROOT NOAIR A2_CLASSIC (Qmobile).

EASIEST WAY TO ROOT NOAIR A2_CLASSIC (Qmobile).
DISCLIMER:
If you somehow manage to damage your phone all responsibility is on you not me. Here I want to declare that I did not developed these tools I just combined them and made a working tutorial.​
BACKGROUND:
Few days back I purchased a Noair A2_Classic and found that it is one of the devices that are very difficult to root and for this you have to unlock its bootloader and install CWM first then you can root them. So I decided to find some safe and easy way and after a great effort found a method which I am going to share with you.
So let’s begin.
REQUIREMENTS:
 A computer with windows operating system.
 Q Noair A2_Classic (Qmobile).
 USB drivers.
 USB data cable.
 Download Root Package from Here
NOTE:
For this process USB debugging must enabled on you phone go to system setting\applications\development
PROCESS:
1. Download and extract Q Noair A2_Classic Root Package at your desktop or any other comfortable place.
2. Run installDriver .exe. this will install drivers for your device.
3. Run Root Genius V1.9.6 .exe. and connect you cell to PC via USB data cable and click Next.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Now this screen will appear.
5. After successful connection tool will recognize your phone as shown in pic now click on Quick Root button.
6. After that root process will begin as shown in pics and during it your phone will be restarted.
7. After successful completion of root process this screen will appear.
8. Now install Busy Box and Root Checker apps and check root & busy box access via Root Checker.
Congratulations!!!!!!!!!! you have done it
NOTE:
As you have successfully rooted your phone and now if you want to install CWM on it then fallow my this tutorial.

[ROOT] Karbonn Titanium S200 HD Rooting

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a tested & safer rooting guide to root your Karbonn Titanium S200 HD :cyclops:
You can root your phone without any PC. If fails, Try rooting on Windows.
YOU ARE RESPONSIBLE FOR YOUR PHONE, ROOTING VOIDS WARRANTY! :good:
Rooting Procedure:
1. Download latest Kingroot apk from http://www.kingroot.net and install on your phone.
2. Do not run unnecessary apps on your phone, connect your phone to internet and open Kingroot app.
3. Kingroot will automatically check your device and gonna show you rooting strategy, try root strategy & wait until it reaches 100% have patience. Do not minimize Kingroot or do not let your screen turned off.
4. Your phone may restart before reaching 100% rooting :cyclops: do not panic, try again! rooting will be resumed.
5. If rooting fails, then restart your phone and try again rooting with Kingroot. Sometimes first attempt fails.
6. I was able to root my S200 HD on second attempt. If you are facing problems while rooting with Kingroot app then download Kingroot for Windows & install on your PC.
7. Turn on USB debugging on your S200 HD. You can enable this option in "developer options". Your phone must be switched on. And then connect to your PC via USB cable.
8. Your PC should be connected to internet. Now, open Kingroot on your Windows on click on root.
It will take few minutes, your phone may restart many times while rooting, no need to worry about it. Wait until you see rooting successful!​
Thor™ : Tнё Боd оf Tнциdёґ​

Do you have any recovery for this???

Hari08 said:
Do you have any recovery for this???
Click to expand...
Click to collapse
It's kingroot, it doesn't require custom recovery. i dont have custom recovery for your device, if you have any, share links on this thread , thanks

[Solved] Help on downgrading to backup TA at E6633

Hello! I'm a little bit new here.
I'm trying to backup my TA before I unlock the bootloader and root my phone. I'm following this guide and I'm currently stuck on the downgrading part as I couldn't find a FTF file for my Z5 Dual (E6633). I did search around and found this but when I opened up Flashtool and looked at the firmwares, it was listed as E6653. I don't want to risk bricking my phone, so I'm posting this to ask for help and clarity. Should I downgrade just to backup my TA files? Do you guys have a legit FTF file of 32.0.A.6.152 for E6633? Thanks.
Image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT:
After searching around and confirming that the Universal TA Backup v2 works on 6.0.1 (Marshmellow) which the E6633 has a version for, I started to downgrade from there. Long story short, I succeeded in backing up my TA!
Here's a how-to step-by-step of what I did if ever you have the same device as me. Sony Xperia Z5 Dual (E6633)
Requirements:
- Flashtool
- Z5 Drivers
- Any E6633 firmware up to 6.0.1 (I used this)
- Universal (Dirtycow-based) TA Backup v2
1. Place the firmware you downloaded at ..\.flashTool\firmwares. This is usually located at %userprofile%.
2. Open Flashtool. Let it do its thing if you ran it the first time.
3. Plug in your device. Flashtool should detect your device.
4. Click the lightning () icon. Leave it at flashmode, and press OK.
5. Select the firmware you've downloaded. If you downloaded what I used, select Central Europe 1 Generic > 32.1.A.1.185_R6C.
6. Tick all the options in Wipe Sin. Do not tick any other boxes in Wipe Misc TA, Exclude Sin & Misc TA.
7. Flash. Follow the instructions of what Flashtool tells you to do.
8. Setup your device.
9. Enable developer settings.
10. Turn on USB Debugging.
11. (Extract backupTA_v2.zip if you haven't before) Run backupTA.cmd.
12. If prompted by the device, allow USB debugging.
13. backupTA_v2 will tell you it's successful. To double-check, your TA.img should be approximately 2MB or 2,048KB.

Unlock tool

Hi, i am trying to put a ROM on my Mi Note 10.
To do this I need to have TWRP.
To do this I have to unlock.
Meanwhile, it's frustrating because I can't find an "how to guide from the beginning" that is exhaustive and has no errors (the last thing I read "download the zip, unzip it and double click on the exe", the exe is not there it's in the zip !) .
So.. Now I do the following points:
1. Mi Account on my phone
1. Enable Developer Settings
1a. Enable USB Debugging
1b. Enable OEM Unlock
1c. Add device in Mi Unlock status in Developer Settings.
2. Unpack MIUI Unlock ( I think correct versione) and log into it
3. Shut down my phone
4. Reboot to Fastboot mode
5. Connect my phone to my PC
6. Launch MIUI UnLock and appear empty grid and... the unlock tool does not work!
I have no error, no message... if I click on REFRESH, or UNLOCK... nothing, really nothing!
Have you got any idea?
Thanks!
PS: sorry for my bad english

Have you install the right driver?

joke19 said:
Have you install the right driver?
Click to expand...
Click to collapse
Really I don't know... Have you got a link so I could verify? Thx

U can install the driver over mi flash tool and then look in the device manager that windows use the right driver. When the name not match, install the right over manual install.

joke19 said:
U can install the driver over mi flash tool and then look in the device manager that windows use the right driver. When the name not match, install the right over manual install.
Click to expand...
Click to collapse
Ok I think now it's ok
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But it's the same... no work Unlock Tool

Ok I found the issue.
In "MiFlash Unlock" version 5.5.224.24 (from XIAOMI site!) there isn't MiUsbDriver.exe!