Related
After upgrading to the latest version of firmware (SmartWatch 2 SW2 v1.4.54) my smartwatch restarts and try to install firmware... during SW2 update process status bar freezed near the end and nothing more happend.
Please help me to fix this problem
ps: I cannot find any Q&A forum for sony smartwatch
Please tell us what have you tried to do up until this point and we'll go from there. I've had this happen to me too, but in the beginning of the update, namely when the firmware was being transferred to the watch.
Similar happened to me, just in my case the update process went to the finish, and then the watch turned off (black screen) and that was over. Can't turn it on, does not show charging screen, nothing, bricked-dead...
Thanks.
I went to google play and upgrade Smartwatch SW2 to it's latest version, which is released yesterday.
I went out of room... when I came back, I saw it freezes in this step... after restarting my SW2, nothing happened.
omidmr said:
Thanks.
I went to google play and upgrade Smartwatch SW2 to it's latest version, which is released yesterday.
I went out of room... when I came back, I saw it freezes in this step... after restarting my SW2, nothing happened.
Click to expand...
Click to collapse
How many apps do you have running for/on the watch? Have you tried uninstalling all of them and doing a clean install?
kamikaze666 said:
How many apps do you have running for/on the watch? Have you tried uninstalling all of them and doing a clean install?
Click to expand...
Click to collapse
It's about updating firmware... currently it cannot turn on completely... it's unpaired, I cannot pair it or see it in other Bluetooth devices.
How can I do a clean install of firmware? before pairing?
omidmr said:
It's about updating firmware... currently it cannot turn on completely... it's unpaired, I cannot pair it or see it in other Bluetooth devices.
How can I do a clean install of firmware? before pairing?
Click to expand...
Click to collapse
I read on one forum that this issue with the firmware may appear because of the apps that are installed for the watch. Namely, after/at the same time it is updating, the watch also tries to pull all info from the phone, including apps and all. I don't know if this will work, but you can try, it won't hurt.
Uninstall all SW2 apps, restart the watch and try again.
kamikaze666 said:
I read on one forum that this issue with the firmware may appear because of the apps that are installed for the watch. Namely, after/at the same time it is updating, the watch also tries to pull all info from the phone, including apps and all. I don't know if this will work, but you can try, it won't hurt.
Uninstall all SW2 apps, restart the watch and try again.
Click to expand...
Click to collapse
nope, nothing happened...
As I told you, my smartwatch does not connect to my cellphone now!
omidmr said:
nope, nothing happened...
As I told you, my smartwatch does not connect to my cellphone now!
Click to expand...
Click to collapse
It was worth a shot... This was what I managed to find when it happened to me...
Anybody else have an idea on what can be done?
kamikaze666 said:
It was worth a shot... This was what I managed to find when it happened to me...
Anybody else have an idea on what can be done?
Click to expand...
Click to collapse
I know I can use dfu-utils to flash from CLI, but I cannot find any DFU file for smartwatch 2.
If it is possible for you, make a backup from yours and give it to me thanks.
At this point you used to be able to "repair" the firmware on the watch using the Sony Update Service. Using your pc you used to be able to load a basic firmware onto the watch and start again...but I think Sony have removed the SW2 from this service.
I think someone on here said they used the SW1 repair option and it worked for them but i'm not sure I would be brave enough to try that unless the watch was totally stuck.....
omidmr said:
I know I can use dfu-utils to flash from CLI, but I cannot find any DFU file for smartwatch 2.
If it is possible for you, make a backup from yours and give it to me thanks.
Click to expand...
Click to collapse
I managed to find this, however, I am not exactly sure for which version it is... https://github.com/underverk/SmartWatch/wiki/Restoring-original-Firmware. I am not able to get to my personal PC for some time, so I won't be able to provide you with a system dump from my watch.
ruggs1234 said:
At this point you used to be able to "repair" the firmware on the watch using the Sony Update Service. Using your pc you used to be able to load a basic firmware onto the watch and start again...but I think Sony have removed the SW2 from this service.
I think someone on here said they used the SW1 repair option and it worked for them but i'm not sure I would be brave enough to try that unless the watch was totally stuck.....
Click to expand...
Click to collapse
Yes, they removed SW2 and SW1 option is not working for SW2!
hennoit lime
kamikaze666 said:
I managed to find this, however, I am not exactly sure for which version it is... https://github.com/underverk/SmartWatch/wiki/Restoring-original-Firmware. I am not able to get to my personal PC for some time, so I won't be able to provide you with a system dump from my watch.
Click to expand...
Click to collapse
Thanks a lot...
I saw that link, that's for SW1.
But I've found latest SW2 firmware from their package in google play
Now my problem is that I cannot restore those images, because there are some differences between those packages and what dfu-utils uses!
I've faced "Error: Only DfuSe file version 1.1a is supported" error, there are a paragraph in http://dfu-util.gnumonks.org/dfuse.html site about this problem, under ".dfu files" heading.
Hi guys
I have a serious problem with my Galaxy Note 10.1 (GT-8010)
After installing wrong stock 4.4. update (for GT-8000) and rooted the device my touchscreen stopped working.
I was able to install the stock firmware (4.1.2. for GT-8010) but still no response from touchscreen. S-pen works though.
Is the anything I can do besides sending the tablet to Samsung?
And how can I know if it is in fact rooted?
Sorry for my inexperience...
Regards
Bernardo
bernasduro said:
Hi guys
I have a serious problem with my Galaxy Note 10.1 (GT-8010)
After installing wrong stock 4.4. update (for GT-8000) and rooted the device my touchscreen stopped working.
I was able to install the stock firmware (4.1.2. for GT-8010) but still no response from touchscreen. S-pen works though.
Is the anything I can do besides sending the tablet to Samsung?
And how can I know if it is in fact rooted?
Sorry for my inexperience...
Regards
Bernardo
Click to expand...
Click to collapse
Have you tried installing stock firmware 4.4.2 for your Device?
RE
filchi756 said:
Have you tried installing stock firmware 4.4.2 for your Device?
Click to expand...
Click to collapse
Hi Filchi
I did but only the GT-8000 one... And had the same problem... I cant know wich zone I should use. Im in Portugal, but I bought it in Redcoon (came from Spain)
The last time I used Heimdall, because Odin not always works...
Am I using the correct ROM? is my tablet really rooted? (When I try an OTA update it says I cant do it because the tablet has been modified...) Maybe if I unrrot it...but dont know how...
KR
Bernardo
bernasduro said:
Hi Filchi
I did but only the GT-8000 one... And had the same problem... I cant know wich zone I should use. Im in Portugal, but I bought it in Redcoon (came from Spain)
The last time I used Heimdall, because Odin not always works...
Am I using the correct ROM? is my tablet really rooted? (When I try an OTA update it says I cant do it because the tablet has been modified...) Maybe if I unrrot it...but dont know how...
KR
Bernardo
Click to expand...
Click to collapse
Try to install any european firmware maybe, there is a spain version for your tablet its N8010XXUDNG1 you can try that. By the way you said you successfully went back to 4.1.2, what is written in download mode is it N8010 or N8000 at the moment? Try pc odin ver.1.85 or 3.07. If you want to know if your tablet is rooted , have install a custom recovery? And also check if you have superuser.apk or su.apk in app drawer if you have then your rooted.
filchi756 said:
Try to install any european firmware maybe. By the way you said you successfully went back to 4.1.2, what is written in download mode is it N8010 or N8000 at the moment? Try pc odin ver.1.85 or 3.07. If you want to know if your tablet is rooted , have install a custom recovery? And also check if you have superuser.apk or su.apk in app drawer if you have then your rooted.
Click to expand...
Click to collapse
Thanks
In download mode I have N-8000 (??)
Do u think this is a hardware problem? Or firmware?
Thank you!
bernasduro said:
Thanks
In download mode I have N-8000 (??)
Do u think this is a hardware problem? Or firmware?
Thank you!
Click to expand...
Click to collapse
Wow this is tricky.An N8010 tablet recognized as N8000. Look in the general section there are threads there with the same problem as yours if I'm not mistaken.If you have guts try installing a 4.4.2 spain for N8010. Or can try a 4.4.2 custom rom to try if that is a hardware or software problem. You have a 4.4.2 bootloader with a 4.1.2 firmware installed now maybe its not compatible?
P.s. try to read here" http://forum.xda-developers.com/galaxy-note-10-1/help/recovering-n8010-leaked-locked-n8000-t2802516 " and here " http://forum.xda-developers.com/showthread.php?t=2780779 "
Two days ago my N8000's touch screen stopped working. It could not detect touches at all. Booting into TWRP recovery which is touch - based gave me the same results. The display still worked perfectly but would not detect touches.
Is this the same problem you're experiencing? If yes then I can share with you what I did to get it to work again.
benjieg said:
Two days ago my N8000's touch screen stopped working. It could not detect touches at all. Booting into TWRP recovery which is touch - based gave me the same results. The display still worked perfectly but would not detect touches.
Is this the same problem you're experiencing? If yes then I can share with you what I did to get it to work again.
Click to expand...
Click to collapse
Kabayan? Mine if you can share your solutions here so others having this problem can fix theirs?
benjieg said:
Two days ago my N8000's touch screen stopped working. It could not detect touches at all. Booting into TWRP recovery which is touch - based gave me the same results. The display still worked perfectly but would not detect touches.
Is this the same problem you're experiencing? If yes then I can share with you what I did to get it to work again.
Click to expand...
Click to collapse
Yes Benjieg
I think it is. But my s-pen still works.
Now I have my N8010 working with stock portuguese 4.1.2., only s-pen, and in download mode it says N8000..... maybe because some months ago I installed N8000 4.4 (early release) by mistake, thinking it was for 8010. But it worked fine...
thanks!
Not sure we have the same case, but in mine, I had to resort to opening up my Note and unplugging the battery for a few seconds, then plugging it back in. Was so relieved the touch screen started responding as normal. Found a video in YouTube on how to open it. Seems like the equivalent of turning it OFF the back ON. But in my case I couldn't turn it off anymore because the touch screen wouldn't respond.
Hope this helps Kabayan.
benjieg said:
Not sure we have the same case, but in mine, I had to resort to opening up my Note and unplugging the battery for a few seconds, then plugging it back in. Was so relieved the touch screen started responding as normal. Found a video in YouTube on how to open it. Seems like the equivalent of turning it OFF the back ON. But in my case I couldn't turn it off anymore because the touch screen wouldn't respond.
Hope this helps Kabayan.
Click to expand...
Click to collapse
Kabayan, thanks for replying.I thought it's software base solution.Anyway maybe you can try pressing the power button for 5 to 7 seconds to restart your device next time.
Thanks for the advice but already tried it and didn't work.
benjieg said:
Thanks for the advice but already tried it and didn't work.
Click to expand...
Click to collapse
thanks
ON and OFF is no solution for me...
maybe is a software problem (if not broken...)
Im going to try an european 4.4.2. install for N-8010 and keep u posted
tks all
confused and need help
i have a n8000 , base band version N8000XXCLL1, my touch screen stoped responding while playing a game , only Spen works , tried resetting , but no help, I'm a no-voice when it comes to programing and need a step by step guide >>>> many thanks in advance for all your help
samsung gt-n8000 s-pen not working while i update my tab in wifi
Hi everybody,
I'm in trouble since this morning.
A month ago, I rooted my S7 with ODIN following the tutorials. Everything works fine.
Yesterday, I had some crashes of the MAPS application.
This morning, I decided to restart my phone to check this trouble. Bad news.
My phone refuse to start with the message "Custom Binary blocked by FAP".
I can access to the download mode and yes, it's set on FAP block : ON !
I don't know how it's happened. The question now is : what can I do ?
Do you thing I should flash with the official ROM again or do I reset to factory directly ?
Thank's for your help.
Best regards.
Pouille
does this help? https://www.youtube.com/watch?v=i4KTg9Hn_nI
If the video above me can't solve your problem, maybe this can help you.
Thank you guys,
I'll check this tonight because I can't download froom this PC.
I'll tell you if it works.
See you.
Pouille99 said:
Hi everybody,
I'm in trouble since this morning.
A month ago, I rooted my S7 with ODIN following the tutorials. Everything works fine.
Yesterday, I had some crashes of the MAPS application.
This morning, I decided to restart my phone to check this trouble. Bad news.
My phone refuse to start with the message "Custom Binary blocked by FAP".
I can access to the download mode and yes, it's set on FAP block : ON !
I don't know how it's happened. The question now is : what can I do ?
Do you thing I should flash with the official ROM again or do I reset to factory directly ?
Thank's for your help.
Best regards.
Pouille
Click to expand...
Click to collapse
I have exactly the same issue !!!
I'm rooted since a while and on the same ROM (superman V1.6) since a while aswell I restarted my phone and then FRP block !
G-ThGraf said:
I have exactly the same issue !!!
I'm rooted since a while and on the same ROM (superman V1.6) since a while aswell I restarted my phone and then FRP block !
Click to expand...
Click to collapse
I'm almost sure that the OEM check has been reactivated by the Security Policy ...
The issue i'm not able to restore the phone....
What's wrong is happening !?
Pouille99 said:
I'm almost sure that the OEM check has been reactivated by the Security Policy ...
Click to expand...
Click to collapse
is there a way to prevent this? currently i have froze the security policy update using titanium backup, is there anything i can do?
mangoapple said:
is there a way to prevent this? currently i have froze the security policy update using titanium backup, is there anything i can do?
Click to expand...
Click to collapse
I don't know. Maybe it was a good idea. For me it's too late.
I will try the different things tonight but I'm not confident.
I reseted the phone with KIES.
Conclusion, I lost all my datas. . . . . . !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Now only one way flash official firmware of your device because I also face this problem after rooted and disabled oem unlock
narenrata24 said:
Now only one way flash official firmware of your device because I also face this problem after rooted and disabled oem unlock
Click to expand...
Click to collapse
Thank's.
That was the way.
I flashed only the AP file and get back the sart up with all my files. Of course, it was locked with the fingerprint but I still have my thumb !
For know, I still have some other troubles : disconnexion of bluetooth, SMS unavailable ...
I will have to flash again but I have the control so it's not too bad.
You can find any and latest firmwares for your Huwaei phone by using the tool Firmware finder http://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
The developer asked to share it.
It has pc version and phone application from playstore.
With this application you can update your phone and it's working 100%
Finally.
So you have try this and it works?
If yes you do it with Android app from playstore or from pc?
It will be great solution for everyone who has problems with OTA updates if this working great!
tsiglas said:
So you have try this and it works?
If yes you do it with Android app from playstore or from pc?
It will be great solution for everyone who has problems with OTA updates if this working great!
Click to expand...
Click to collapse
Yes i tried it ,with the application and it work.
You need the app from first page in his thread, it's a test version not the one in playstore.
Only work with signed firmwares.
gm007 said:
Yes i tried it ,with the application and it work.
You need the app from first page in his thread, it's a test version not the one in playstore.
Only work with signed firmwares.
Click to expand...
Click to collapse
do you perhaps know how the pc app works ? i found the firmware and downloaded it but i don't know how to go about installing it ( my phoen is in a brick state , it boots normally but then i get a black screen with only the soft keys displayed)
touns_j said:
do you perhaps know how the pc app works ? i found the firmware and downloaded it but i don't know how to go about installing it ( my phoen is in a brick state , it boots normally but then i get a black screen with only the soft keys displayed)
Click to expand...
Click to collapse
the instuctions inside pc app http://hwmt.ru/hwmtsite/faq/
gm007 said:
the instuctions inside pc app http://hwmt.ru/hwmtsite/faq/
Click to expand...
Click to collapse
i read that and nowhere it explains how to install the firmware via the PC app ( especially considering my predicament ) but thanks
touns_j said:
i read that and nowhere it explains how to install the firmware via the PC app ( especially considering my predicament ) but thanks
Click to expand...
Click to collapse
It's in test version,but if you want maybe try:
Open firmware finder on pc ,start firmware update and copy the link for the firmware you want to flash,the link should be like http:..../..../f1/
And click start the server.
On your phone connect to the same wifi as ur pc,go to wifi settings, click and hold on the connected network,you will see advance settings,fill ip same as the ip of ur pc and port same as the one in firmware finder.
Once done go to update in phone settings and check for updates,you should see a new firmware update.
Hope you will understand.
gm007 said:
It's in test version,but if you want maybe try:
Open firmware finder on pc ,start firmware update and copy the link for the firmware you want to flash,the link should be like http:..../..../f1/
And click start the server.
On your phone connect to the same wifi as ur pc,go to wifi settings, click and hold on the connected network,you will see advance settings,fill ip same as the ip of ur pc and port same as the one in firmware finder.
Once done go to update in phone settings and check for updates,you should see a new firmware update.
Hope you will understand.
Click to expand...
Click to collapse
i don't mean to sound rude but seems that you didn't read what i said my phone is in a brick state , it boots normally but then i get a black screen with only the soft keys displayed , so i can't install anything since the whole screen is just black
touns_j said:
i dom't mean to sound rude but seems that you didn't read what i said my phone is in a brick state , it boots normally but then i get a black screen with only the soft keys displayed , so i can't install anything since the whole screen is just black
Click to expand...
Click to collapse
Yeah sorry 1 am here lol
Did you tried a factory reset from recovery?
gm007 said:
Yeah sorry 1 am here lol
Did you tried a factory reset from recovery?
Click to expand...
Click to collapse
yeah did that several times , the latest huawei device i had was the mate 7 , i didn't know they locked the update process via the dload method, i wouldn't allowed my gf to buy this phone if i knew , i thought i would be able to fix it quickly but oh well she'll just have to return it, one more reason to make me happy that i opted for the pixel xl instead of the mate 9
I have the LON-L29C636B124 firmware, the app from play store found the B139 for this device/donwloaded/md5 checked/unpacked and moved to the Dload folder bjt when i go the recovery it says there is nothing on that folder.
Lodix said:
I have the LON-L29C636B124 firmware, the app from play store found the B139 for this device/donwloaded/md5 checked/unpacked and moved to the Dload folder bjt when i go the recovery it says there is nothing on that folder.
Click to expand...
Click to collapse
Update the application and in it''s settings enable server installation.
gm007 said:
Update the application and in it''s settings enable server installation.
Click to expand...
Click to collapse
Do you mean "installation via system update", I enabled that and it installed and ad-on that forced the phone to detect the update... it updated but in the phone info it still has the same number but the security patch is now from December instead of November haha
Lodix said:
Do you mean "installation via system update", I enabled that and it installed and ad-on that forced the phone to detect the update... it updated but in the phone info it still has the same number but the security patch is now from December instead of November haha
Click to expand...
Click to collapse
Yes that's how it work right now.
gm007 said:
Yes that's how it work right now.
Click to expand...
Click to collapse
Ok thanks
woow ill try this now
Doesn't work, downloaded the update, moved to reload folder, starts update and fails verification.
Ok, selected the ota not full B138 it updated, the security patch is december, ank kernel info date also december, but why it shows 126 instead of 138?
Maybe it just updated minor things not the full system?
And after update i do not notice anything.
recklesslife85 said:
Doesn't work, downloaded the update, moved to reload folder, starts update and fails verification.
Click to expand...
Click to collapse
You don't have to download the update in firmware finder,you only need to activate the server update in firmware finder and change the proxy, after that you go to system update and check for updates.
Hello,
I have two j7 2016 fn. One is mine one for repair. I recognized that there is a bootlogo difference. The onw which works has a thin powered by android line while the one with touch problems has a bold android. So I guess there I have an outdated bootloader on that phone. How can I update?
spirit_of_the_ocean said:
Hello,
I have two j7 2016 fn. One is mine one for repair. I recognized that there is a bootlogo difference. The onw which works has a thin powered by android line while the one with touch problems has a bold android. So I guess there I have an outdated bootloader on that phone. How can I update?
Click to expand...
Click to collapse
Use samsung smart switch
sandeepkumar0153 said:
Use samsung smart switch
Click to expand...
Click to collapse
Yes I already tried
But smartswitch said that the phone does not allow data transfer via usb.
I can't use touch. Every rom I flashed does not make the touchscreen work.
I saw on youtube that some said to get back to marshmallow. But I heard that could lead to loosing the imei.
What should I do?
spirit_of_the_ocean said:
Yes I already tried
But smartswitch said that the phone does not allow data transfer via usb.
I can't use touch. Every rom I flashed does not make the touchscreen work.
I saw on youtube that some said to get back to marshmallow. But I heard that could lead to loosing the imei.
What should I do?
Click to expand...
Click to collapse
Does the touch work in twrp ?? There is a twrp flashable stock rom in here, maybe it helps
sandeepkumar0153 said:
Does the touch work in twrp ?? There is a twrp flashable stock rom in here, maybe it helps
Click to expand...
Click to collapse
Thanks for your help. Since in download mode frp lock shows as on I did not tried to install twrp. I don't know what will happen because my friend gave it with a Factory reset to me.
spirit_of_the_ocean said:
Thanks for your help. Since in download mode frp lock shows as on I did not tried to install twrp. I don't know what will happen because my friend gave it with a Factory reset to me.
Click to expand...
Click to collapse
Out of ideas now, good luck and i hope you get it solved