Database Info

Can't root OG1 - help

My Galaxy S5 (Sprint) updated to G900PVPU3BOG1 "OG1" firmware.
SInce then I can not root the phone with CF-Auto_root as usual. I tried TWRP (my fav), Clockworkmod, & philz touch. All give me a FAIL in ODIN.
I tried ODIN 3.10 and 3.09.
I also tried to flash custom ROMs with ODIN with similar FAIL in ODIN.
Now, I've flashed and rooted my S3 and S5 a number of times of different PCs without issues but nothing seems to work since I got OG1.
Is this a security issue with OG1? Am I missing something? I've exhausted all options I know of.
Joe
Here is what ODIN says when applying TWRP 2.8.7.0
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

[email protected] said:
My Galaxy S5 (Sprint) updated to G900PVPU3BOG1 "OG1" firmware.
SInce then I can not root the phone with CF-Auto_root as usual. I tried TWRP (my fav), Clockworkmod, & philz touch. All give me a FAIL in ODIN.
I tried ODIN 3.10 and 3.09.
I also tried to flash custom ROMs with ODIN with similar FAIL in ODIN.
Now, I've flashed and rooted my S3 and S5 a number of times of different PCs without issues but nothing seems to work since I got OG1.
Is this a security issue with OG1? Am I missing something? I've exhausted all options I know of.
Joe
Here is what ODIN says when applying TWRP 2.8.7.0
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I am also having this same issue when trying to use CF autoroot and if I try to flash any custom recovery.

I have OG1 on my S5 and never had a problem with getting root. I used Odin3_v3.10.7 and used CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5. TWRP works well but I used Philz. Try this order when rooting. Its seems to me its always something small that your missing.
Put your phone in download mode
activate odin and then plug in your phone to the usb.
click on the AP tab load the md file from cf auto root
make sure your comm port shows up and is blue, if all is right
click the start button and in 9 seconds you should be rooted and then follow up with twrp or Philz and you should be all set...

Suntar said:
I have OG1 on my S5 and never had a problem with getting root. I used Odin3_v3.10.7 and used CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5. TWRP works well but I used Philz. Try this order when rooting. Its seems to me its always something small that your missing.
Put your phone in download mode
activate odin and then plug in your phone to the usb.
click on the AP tab load the md file from cf auto root
make sure your comm port shows up and is blue, if all is right
click the start button and in 9 seconds you should be rooted and then follow up with twrp or Philz and you should be all set...
Click to expand...
Click to collapse
OK tried using odin 3.10.7 and it still failed at the same exact point:crying:

Suntar said:
I have OG1 on my S5 and never had a problem with getting root. I used Odin3_v3.10.7 and used CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5. TWRP works well but I used Philz. Try this order when rooting. Its seems to me its always something small that your missing.
Put your phone in download mode
activate odin and then plug in your phone to the usb.
click on the AP tab load the md file from cf auto root
make sure your comm port shows up and is blue, if all is right
click the start button and in 9 seconds you should be rooted and then follow up with twrp or Philz and you should be all set...
Click to expand...
Click to collapse
[email protected] said:
My Galaxy S5 (Sprint) updated to G900PVPU3BOG1 "OG1" firmware.
SInce then I can not root the phone with CF-Auto_root as usual. I tried TWRP (my fav), Clockworkmod, & philz touch. All give me a FAIL in ODIN.
I tried ODIN 3.10 and 3.09.
I also tried to flash custom ROMs with ODIN with similar FAIL in ODIN.
Now, I've flashed and rooted my S3 and S5 a number of times of different PCs without issues but nothing seems to work since I got OG1.
Is this a security issue with OG1? Am I missing something? I've exhausted all options I know of.
Joe
Here is what ODIN says when applying TWRP 2.8.7.0
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
So after many many attepts and failures I saw a post that said that the problem that I was running into was that I had reactivation lock on. I shut off reactivation lock and my phone rooted and allowed me to install a custom recovery without any issue. Hopefully this helps others who are having this same problem

j3ffm1ll said:
So after many many attepts and failures I saw a post that said that the problem that I was running into was that I had reactivation lock on. I shut off reactivation lock and my phone rooted and allowed me to install a custom recovery without any issue. Hopefully this helps others who are having this same problem
Click to expand...
Click to collapse
That was it!! The reactivation lock option was checked.
Back to normal now, rooted, etc. Thanks!
https://youtu.be/1Vo_QFpSLhg

Glad you got rooted..

would this be the fix if i'm on OG1 update?

lifesgood88 said:
would this be the fix if i'm on OG1 update?
Click to expand...
Click to collapse
Just make sure that it is unchecked. Then you can flash a recovery with ODIN and then supersu if you want rooted stock.

can i change a recovery.img into a md5 file so i can flash it?

lifesgood88 said:
can i change a recovery.img into a md5 file so i can flash it?
Click to expand...
Click to collapse
Go here, https://www.androidfilehost.com/?w=files&flid=15340
Download either the first one on the page the KTsoonez TWRP or philz_touch_6.57.8-klte.tar. Turn off phone and reboot to download mode (power + home + vol down) . Open ODIN on the computer when the phone is in download mode. Connect phone to computer. ODIN should recognize it. Put recovery in PA slot and check auto reboot. Hit start and the recovery should flash in a few seconds. After it is finished, unplug phone and pull battery. turn on phone normally and let it boot. Download this file https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip and copy to phone SD. Turn off phone. Turn on phone to recovery power+vol up+home and Install Zip and select this file you just downloaded. Reboot. You are rooted.

So I'm trying to root my roommates S5 G900P/OG1 with Odin 3.10.7 and I cant disable the reactivation lock on it. It will let me put in his password then it goes back to the security page with the lock still on. Ive tried the factory reset workaround to no avail. Ive searched and searched. Does anyone have any ideas?

Help!! Sw rev check fail device 3 binary 2

I accidentally used 5.0.2 root on my 5.1.1 t-mobile s6 and it got the "RECOVERY IS NOT SEANDROID ENFORCING"
So I tried to re-root by using the 5.1.1 version and it still got the same error. Stupid, I know
I did some google search and I found out that I need to flash to stock firmware, so I tried.
And it have new problem: SW REV CHECK FAIL DEVICE 3 BINARY 2
Please help. I just got this phone for a month.
This is the log of ODIN (3.10)
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>

You should flash twrp recovery in order to get out of the bootloop. Google "Download TWRP for zeroflte", click on the first result, then download with the extension .tar so you can flash it in odin. Once downloaded, put your phone into download mode, connect it on computer, run odin and put the downloaded twrp recovery on AP. Flash it and the phone should finish booting up

CloseCoder said:
You should flash twrp recovery in order to get out of the bootloop. Google "Download TWRP for zeroflte", click on the first result, then download with the extension .tar so you can flash it in odin. Once downloaded, put your phone into download mode, connect it on computer, run odin and put the downloaded twrp recovery on AP. Flash it and the phone should finish booting up
Click to expand...
Click to collapse
It does not show the "RECOVERY IS NOT SEANDROID ENFORCING" anymore but it still stuck at the samsung logo
I tried to flash it back to stock android but still get the "Sw rev check fail device 3 binary 2"

sboot fail mean BOOTLOADER FAIL ....download latest firmware build for you device from sammobile and flash ...

PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T

CloseCoder said:
You should flash twrp recovery in order to get out of the bootloop. Google "Download TWRP for zeroflte", click on the first result, then download with the extension .tar so you can flash it in odin. Once downloaded, put your phone into download mode, connect it on computer, run odin and put the downloaded twrp recovery on AP. Flash it and the phone should finish booting up
Click to expand...
Click to collapse
CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
lummujaj said:
sboot fail mean BOOTLOADER FAIL ....download latest firmware build for you device from sammobile and flash ...
Click to expand...
Click to collapse
Thanks very much, I fix my phone by flashing TWRP and used ADB to transfer a custom rom over from my pc to the 6. I flashed the rom and it is working fine now.

help pls got the same problem
nguye205 said:
Thanks very much, I fix my phone by flashing TWRP and used ADB to transfer a custom rom over from my pc to the 6. I flashed the rom and it is working fine now.
Click to expand...
Click to collapse
I don't know how to to transfer a custom rom over from my pc using ADB.
I can go only into download mode and not recovery.
I tried flashing with odin TWRP and wasn't able to remove "RECOVERY IS NOT SEANDROID ENFORCING"" but after using a recovery "frecovery.tar.md5" it got removed , and now stuck at the loop can't turn it on and it will not go into recovery mode . PLSS help

BL
CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
Could you plz email me the BL file? [email protected] . And im not sure if its firmware specific, can i flash the oi1 BL on oi6? and just to make sure are we talking the G920T model?

NotTheDroidsUrLooking4 said:
Could you plz email me the BL file? [email protected] . And im not sure if its firmware specific, can i flash the oi1 BL on oi6? and just to make sure are we talking the G920T model?
Click to expand...
Click to collapse
hi i have a s6 sm-g925i and not flash always same error sw rev check fail device 3 binary 2

sunnyce said:
I don't know how to to transfer a custom rom over from my pc using ADB.
I can go only into download mode and not recovery.
I tried flashing with odin TWRP and wasn't able to remove "RECOVERY IS NOT SEANDROID ENFORCING"" but after using a recovery "frecovery.tar.md5" it got removed , and now stuck at the loop can't turn it on and it will not go into recovery mode . PLSS help
Click to expand...
Click to collapse
Did you find a solution?! I have the exact same problem

nguye205 said:
And it have new problem: SW REV CHECK FAIL DEVICE 3 BINARY 2
Please help. I just got this phone for a month.
Click to expand...
Click to collapse
Did you fix it?
I guess I'm fixing it now. I tried to flash 4-file firmware separately.
First: I downloaded and installed this TWRP zeroflte
BUT you can begin with -
Second: I flashed ONLY BOOTLOADER of this 4-file service firmware I9500XXUFNB3 (Unfortunatelly I cannot write down outside links of this file, because of I'm new user and system didn't allow me, but you can Google it and download from 4pda).
Third: I flashed ONLY AP
Fourth: I flashed CP (Modem)
Fifth: Last one CSC
FIRST START!...

CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
hope you can help but i have verixon s6 and its stuck also on bootloop w that binary device message ive wiped cache factory reset and everything ive tried flash stock firmware thur odin everything i try Failed odin mode on top of download mode and not sure what i can do to get it to boot up. i dont care about wiping it all since its new anyway.
any help greatly appreciated/

ToY9CiTo said:
hope you can help but i have verixon s6 and its stuck also on bootloop w that binary device message ive wiped cache factory reset and everything ive tried flash stock firmware thur odin everything i try Failed odin mode on top of download mode and not sure what i can do to get it to boot up. i dont care about wiping it all since its new anyway.
any help greatly appreciated/
Click to expand...
Click to collapse
Hello did u get this fixed ?
i am facing the same issue
i d really appreciate if u update ur solution here
thanks

After installing twrp my phone is not showing IMEI and baseband. So sim card also not working. Using custom rom but still the same.

faurionutz said:
Flash back stock rom, if still no imei or baseband you must repair imei and baseband, contact me if you need this
Click to expand...
Click to collapse
Now stock rom also not working. I have tried to install many roms which used to work fine before installing twrp now they are giving error. I managed to install just 1 rom but Network and baseband is empty. I have no clue.

Can u sant me the bootloader pls? [email protected]

Help
CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
Can u plz send me the bootloader [email protected]

im getting the same problem i try to use twrp and flash and i get:
<ID:0/013> Odin engine v(ID:3.1101)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> recovery.img
<ID:0/013> NAND Write Start!!
<ID:0/013> RQT_CLOSE !!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help phone is still very new

stonytony666 said:
im getting the same problem i try to use twrp and flash and i get:
<ID:0/013> Odin engine v(ID:3.1101)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> recovery.img
<ID:0/013> NAND Write Start!!
<ID:0/013> RQT_CLOSE !!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help phone is still very new
Click to expand...
Click to collapse
Try this recovery mate

xfury94 said:
Try this recovery mate
Click to expand...
Click to collapse
this is what i get after trying your recovery:
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin engine v(ID:3.1101)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> recovery.img
<ID:0/013> NAND Write Start!!
<ID:0/013> RQT_CLOSE !!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

bricked galaxy s6 G920F, no recovery, no os. just download mode

Hello guys
i really need help to unbrick this phone, ive tried to root the phone and its bricked now !
not working at all
boot looping
cant enter recovery
i tried to flash twrp recovery using odin
but couldnt enter it to
tried to flash a whole rom using odin and i get an error
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1005)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the download mode i get
KNOX WARRANTY VOID:1 (0X0301)
AP SERV: B:3 K:2 S:2
please help me guys to make it boot
i cant do anything but see this blue screen

any help ?

Im getting out of my mind
Is it even fixable ??
Please please help me guys

Its fixable, but you'll need to trip your Knox , I was in ur shoes and here's how I got it fixed
Flash Philz recovery from Odin on download mode, then boot into recovery (home+power+volume up) then reset everything I mean everything except recovery, then go back into download mode and flash stock firmware Knox will be tripped cuz of Philz
Hope it works out
Edit: just realized your Knox was already tripped lol
---------- Post added at 04:59 AM ---------- Previous post was at 04:50 AM ----------
If your wondering where to download philz, go to Arter97s website http://arter97.com/browse/exynos7420/recovery/11.0/
Find model number (G920I for me) then download the recovery

SwaggerDaddy said:
Its fixable, but you'll need to trip your Knox , I was in ur shoes and here's how I got it fixed
Flash Philz recovery from Odin on download mode, then boot into recovery (home+power+volume up) then reset everything I mean everything except recovery, then go back into download mode and flash stock firmware Knox will be tripped cuz of Philz
Hope it works out
Edit: just realized your Knox was already tripped lol
---------- Post added at 04:59 AM ---------- Previous post was at 04:50 AM ----------
If your wondering where to download philz, go to Arter97s website http://arter97.com/browse/exynos7420/recovery/11.0/
Find model number (G920I for me) then download the recovery
Click to expand...
Click to collapse
i flashed it but i cant boot to recovery
it says recovery is not seandroid
ughhh it seems so hard to fix

Are you sure that you tried to get in recovery. For me it seems that your error comes on boot up
http://www.droidviews.com/fix-recovery-is-not-seandroid-enforcing-error-on-samsung-galaxy-devices/
http://www.galaxys6edgeupdate.com/r...nforcing-galaxy-s6-t-mobile-g920t-how-to-fix/

alawii_shark said:
i flashed it but i cant boot to recovery
it says recovery is not seandroid
ughhh it seems so hard to fix
Click to expand...
Click to collapse
this can be fixed, go to sammobile find the firmware according to your phone model, flash it using ODIN, that's it.

Hi @alawii_shark
Can you share if you are on 5.0.2 or 5.1.1 firmware, bootloader & modem?
- Renolz

alawii_shark said:
i flashed it but i cant boot to recovery
it says recovery is not seandroid
ughhh it seems so hard to fix
Click to expand...
Click to collapse
LOL are you sure you let the phone go to recoverymode ?
Hold volume up + home + power for 6 sec you will het inside recovery

Have you entered into recovery mode ?

alawii_shark said:
Hello guys
i really need help to unbrick this phone, ive tried to root the phone and its bricked now !
not working at all
boot looping
cant enter recovery
i tried to flash twrp recovery using odin
but couldnt enter it to
tried to flash a whole rom using odin and i get an error
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1005)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the download mode i get
KNOX WARRANTY VOID:1 (0X0301)
AP SERV: B:3 K:2 S:2
please help me guys to make it boot
i cant do anything but see this blue screen
Click to expand...
Click to collapse
How many times has been said .... Sboot fail is when you try to flash an older firmware than you currently have.... Flash OI9 BTU and you are OK

lummujaj said:
How many times has been said .... Sboot fail is when you try to flash an older firmware than you currently have.... Flash OI9 BTU and you are OK
Click to expand...
Click to collapse
Okay i will try to flash OI9 BTU
Even though i tried to flash the latest xsg ( my phone is xsg) it failed at the last
Maybe i need flash the pit file too ?

Depending on your model twrp might not work, 3.0.0 and 2.8.7.2 didn't work, I had to use 2.8.7.1, anyways flash that version and UNCHECK AUTO REBOOT ON ODIN and now it should work

Is there anyway i can know which one should i flash
I had 5.1.1 xsg
And my phone is SM-G920F
i took my phone to a phone shop and they can fix it
Even though i dont believe they will be able too
I just wish it works

when i try to flash the latest frimware with odin i get
<ID:0/009> Odin engine v(ID:3.1005)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> cm.bin
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> system.img
<ID:0/009> modem.bin
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
Click to expand...
Click to collapse
anyone knows what the problem ?

alawii_shark said:
when i try to flash the latest frimware with odin i get
anyone knows what the problem ?
Click to expand...
Click to collapse
Flash only pit file... Do a factory reset (home+volume up+ power) and your ok

Please help cannot flash Stock

So I messed up my s7 by flashing a wrong version of xposed and now I can't go back to stock.
Trying to flash it through Odin but I get a "sw rev check fail" message
Please help :'(

marcotics said:
So I messed up my s7 by flashing a wrong version of xposed and now I can't go back to stock.
Trying to flash it through Odin but I get a "sw rev check fail" message
Please help :'(
Click to expand...
Click to collapse
Are you sure you are flashing correct firmware and the latest version?

Yes, I'm trying to flash G930TUVS2APB8
Should I only do "AP"? Or try all four files?
What do I do in the CSC field? Load the CSC or HOME_CSC file?
Should I try the special Odin by PrinceComsy or 3.11?

This is what I get on Odin
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> persist.img.ext4
<ID:0/006> Home Binary Download
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> emmc_appsboot.mbn
<ID:0/006> lksecapp.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
This is what shows up on Odin

Fixed the problem!!! thanks

What was the solution? I'm having this issue as well

Try going into recovery and factory reset(wipe data)

It got fixed by using my pc rather than my laptop (had same drivers installed so no idea)
Also downloaded the absolute latest firmware from sammobile and latest Odin
Hope you can fix your problem man.
Note: if it doesnt let you flash stock I read that it may be because you're trying to flash something older, by default you cannot downgrade on s7

please, please help me. Bootloader is broken. My GT-N8010 continiously starting

I had the plan to give my GT-N8010 a new rom, I had an old stock Samsung ROM. So I succeeded to root my device bij flashing CF-Auto-Root by using Odin. Next I downloaded Twrp in the Googles Playstore and tried to install the right Twrp. And then......it gave a mistake. Since that time I can't start my device. I succeeded in coming in download mode and flashed Twrp. But the the device is now continiously starting en starting. The only thing I can do is coming in Downloadmode. Flashed Twrp with Odin. It indicates "passed" and no failure, but after that the device is continiously starting only with the startviews from samsung.
Please please, who can help me

tryer2 said:
I had the plan to give my GT-N8010 a new rom, I had an old stock Samsung ROM. So I succeeded to root my device bij flashing CF-Auto-Root by using Odin. Next I downloaded Twrp in the Googles Playstore and tried to install the right Twrp. And then......it gave a mistake. Since that time I can't start my device. I succeeded in coming in download mode and flashed Twrp. But the the device is now continiously starting en starting. The only thing I can do is coming in Downloadmode. Flashed Twrp with Odin. It indicates "passed" and no failure, but after that the device is continiously starting only with the startviews from samsung.
Please please, who can help me
Click to expand...
Click to collapse
after installing Twrp I get next message:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

Flash stock rom via Odin .

I succeeded inrecovering my device bin flashing stock rom by Odin. Thank you JJEgan