Related
Hello,
Just bought a topaz blue unlocked S6. I think it came from an Asian country. The phone arrived perfectly with plastic in box with the same IMEI as phone. However it was rooted with SU. I went into the app and clicked to remove root. It was on 5.0.2. They I tried to flash original firmware with Smart Switch with no success.
I used odin to flash stock 5.1.1 firmware from the UK. The firmware was for 920F. It went all good. I have LTE, SMS and phonecalls. However, sometimes the baseband appears as unknown, but I still can make calls and have LTE. And it still shows the same IMEI as it is on the box and it has always shown it. Is there a way to fix this? Now, I try to flash stock firmware with Smart Switch and it says it can't initialize.
I would REALLY appreciate help. I would love to be able to flash stock firmware from Smart Switch.
I'm in México with Telcel, which uses the same bands as AT&T.
P.S. I really searched and couldn't find anything on my specific situation.
That happened to me when I was still on 5.0.2 and flashed only the 5.1.1 modem. I would suggest downloading the modem.tar file and flash that. Should all be good after that.
I'm currently downloading G920FXXU1AOD4 BTU firmware to flash it with Odin. Might that help me better? My main goal is to be 100% stock without any weirdness. And having Smart Switch recognize my phone!
Well, I'm sad.
calot said:
I'm currently downloading G920FXXU1AOD4 BTU firmware to flash it with Odin. Might that help me better? My main goal is to be 100% stock without any weirdness. And having Smart Switch recognize my phone!
Click to expand...
Click to collapse
You cannot downgrade to 5.0.2 from 5.1.1. Your bootloader will not support. I have the issue with 3G connection. Where to get the Modem.tar?
My goal would be to install Cyanogenmod on my SM-G920R7, but haven't been able to find too much help. Any of the rooting methods that seem to work on rest of the S6 variants, doesn't seem to work on this one. There is no TWRP available that I know of.
I would really appreciate any possible help. Thanks in advance.
i have the same problem
I think that this version of the s6 (the cspire version) isn't widely available enough and no one has bothered to make a root for it - ive been searching for a long time and still haven't found anything
I'd like to at least be able to root this thing.. On 5.1.1 now.
I have a rooted cellphone of this version (I purchased it rooted), is there any workaround to unlock GSM/LTE bands on this device?
----
Edit... Okay, so I went back to fresh stock with SmartSwitch, then flashed twrp-3.0.0-0-zerofltespr and Unikernel-v9b-BOH1-920P-100815 via odin 3.10.7, and rooted again... any method to enable gsm on this device yet?
jfarreola said:
I have a rooted cellphone of this version (I purchased it rooted), is there any workaround to unlock GSM/LTE bands on this device?
----
Edit... Okay, so I went back to fresh stock with SmartSwitch, then flashed twrp-3.0.0-0-zerofltespr and Unikernel-v9b-BOH1-920P-100815 via odin 3.10.7, and rooted again... any method to enable gsm on this device yet?
Click to expand...
Click to collapse
How exactly did you root it again? Was it SM-G920R7?
phreak311 said:
How exactly did you root it again? Was it SM-G920R7?
Click to expand...
Click to collapse
Yes, it was SM-G920R7... first, I flashed twrp-3.0.0-0-zerofltespr , then Unikernel-v9b-BOH1-920P-100815 , both via ODIN (you can google both files), note these files are NOT for r7 version (they're for sprint version *g920p*) but they'll root the phone.
I ended up getting rid of the phone as there's afaik no way to enable gsm on it
jfarreola said:
Yes, it was SM-G920R7... first, I flashed twrp-3.0.0-0-zerofltespr , then Unikernel-v9b-BOH1-920P-100815 , both via ODIN (you can google both files), note these files are NOT for r7 version (they're for sprint version *g920p*) but they'll root the phone.
I ended up getting rid of the phone as there's afaik no way to enable gsm on it
Click to expand...
Click to collapse
That's not true. I finally rooted that model and got TWRP installed, and followed the steps to get the Sprint Galaxy S4 domestic SIM unlocked. I finally got data and texting working last night, but I can't get calls to work for some reason on an AT&T SIM card. It even shows up at AT&T as my provider. AFIK it is now SIM unlocked, the only thing not working is calls like I said. I'm sooooo close to getting this working. I need people with this phone that are doing the same thing i'm doing! I only paid $50 for it! lol
Can u help me get mine unlocked , ive already rooted the phone.
shykidd said:
Can u help me get mine unlocked , ive already rooted the phone.
Click to expand...
Click to collapse
How did you root the phone thanks for any help
phreak311 said:
That's not true. I finally rooted that model and got TWRP installed, and followed the steps to get the Sprint Galaxy S4 domestic SIM unlocked. I finally got data and texting working last night, but I can't get calls to work for some reason on an AT&T SIM card. It even shows up at AT&T as my provider. AFIK it is now SIM unlocked, the only thing not working is calls like I said. I'm sooooo close to getting this working. I need people with this phone that are doing the same thing i'm doing! I only paid $50 for it! lol
Click to expand...
Click to collapse
What model did you use and what recovery to root phone
makemesmile said:
What model did you use and what recovery to root phone
Click to expand...
Click to collapse
use root for sprint or us cellular
DEXEIL said:
use root for sprint or us cellular
Click to expand...
Click to collapse
What model will work with my phone I have my backup for if something goes wrong but if I charge the recovery and have some type of issue can I use the stock rom again thanks for your help I had a gs3 rooted and really like it now I got the sm-920r7 what model with sprint or us cellular will work
Root sm-g920r7
lazydude said:
my goal would be to install cyanogenmod on my sm-g920r7, but haven't been able to find too much help. Any of the rooting methods that seem to work on rest of the s6 variants, doesn't seem to work on this one. There is no twrp available that i know of.
I would really appreciate any possible help. Thanks in advance.
Click to expand...
Click to collapse
use the cf auto root download this use google to search first one that comes up use that link go to model sm-g920p cspire and sprint uses
the same network . Use odin to install i have same phone and have mine rooted in this way. So far tried using the sprint version custom rom it will work but you can make phone calls but not the data side for phone internet.
---------- Post added at 04:09 PM ---------- Previous post was at 03:57 PM ----------
makemesmile said:
how did you root the phone thanks for any help
Click to expand...
Click to collapse
use the cf auto root download this use google to search first one that comes up use that link go to model sm-g920p cspire and sprint uses
the same network . Use odin to install i have same phone and have mine rooted in this way. So far tried using the sprint version custom rom it will work but you can make phone calls but not the data side for phone internet. Make sure you go to phone settings under find my phone and turn off reactivation lock
Any way to get the G920P roms to work on this variant? I've had luck with them with other c-spire/ntelos/r7 phones in the past. I'd like to flash Renegade to it...
blazie151 said:
Any way to get the G920P roms to work on this variant? I've had luck with them with other c-spire/ntelos/r7 phones in the past. I'd like to flash Renegade to it...
Click to expand...
Click to collapse
It works but the phone data Internet won't work can make phone calls and sprints annoying activation keeps posing up and even tried the pit file for cspire no change on that
Sent from my SM-G920R7 using Tapatalk
Wonder if anyone has got calls working using GSM sim card? I have the cspire G920R7 rooted with LTE data working using AT&T sim.
Won't receive calls (straight to vmail) and when placing calls dialer says CALL ENDED immediatly after dialing.
hmmm.
TEC602 said:
Wonder if anyone has got calls working using GSM sim card? I have the cspire G920R7 rooted with LTE data working using AT&T sim.
Won't receive calls (straight to vmail) and when placing calls dialer says CALL ENDED immediatly after dialing.
hmmm.
Click to expand...
Click to collapse
I'm working on this too. So far I've got the same situation as you, Data works but no calls/text.
in a few weeks the person who wants me to unlock this phone for them is switching carriers and plans on buying a new phone to use until I can unlock the S6, so I'll have more time to mess with it then.
There's a few things I want to try, but I can't post links here (XDA rules).
One involves Rooting and using a service code to unlock the bands (google "TeamUSCellular GSM unlock S6")
The other also requires rooting and involves using "galaxy tools" to unlock the bands (not sure if this app works with marshmallow, though) (google "theandroidsoul how to sim unlock sprint galaxy S6")
My hopes are not high for getting this phone to work fully. I've also been trying to get custom ROMs to work, but I can't get the cell radio to work at all on custom ROMs. Even with the stock SM-G920R7 Kernel straight from the latest update .tar
Sean89us said:
I'm working on this too. So far I've got the same situation as you, Data works but no calls/text.
.......
Click to expand...
Click to collapse
Thanks for the suggestion, yeah I have tried galaxy tools (GT) to change the phone mode to LTE/GSM auto and tried different CSC values, and accessed the hidden menus through there. The sim unlock in GT asks for a code which I dont know, but the phone doesn't seem to be locked anyway since it doesn't care when I try different sim cards. Weird thing is the GT app doesn't work very well (most hidden menus not working) on the current rom i'm using but worked better on the stock cspire rom. Note, I tried using MSL 000000 in ##3282# data menu and it works but most the settings in there don't seem to be applicable to GSM networks.
Currently I'VE been messing with the build.prop file, also tried the CDMA to GSM flashable zip which edits the build.prop but nothing has gotten better. One time after editing the build.prop the phone would only turn on with a blank screen and vibrate every few seconds, that was SCARY. Also was planning on flashing other radio/modem but having trouble finding many of those files and pulling them from roms seems difficult to get the correct file to flash on odin.
TEC602 said:
Thanks for the suggestion, yeah I have tried galaxy tools (GT) to change the phone mode to LTE/GSM auto and tried different CSC values, and accessed the hidden menus through there. The sim unlock in GT asks for a code which I dont know, but the phone doesn't seem to be locked anyway since it doesn't care when I try different sim cards. Weird thing is the GT app doesn't work very well (most hidden menus not working) on the current rom i'm using but worked better on the stock cspire rom. Note, I tried using MSL 000000 in ##3282# data menu and it works but most the settings in there don't seem to be applicable to GSM networks.
Currently I'VE been messing with the build.prop file, also tried the CDMA to GSM flashable zip which edits the build.prop but nothing has gotten better. One time after editing the build.prop the phone would only turn on with a blank screen and vibrate every few seconds, that was SCARY. Also was planning on flashing other radio/modem but having trouble finding many of those files and pulling them from roms seems difficult to get the correct file to flash on odin.
Click to expand...
Click to collapse
I'm not sure you'll even be able to flash other models' modem..? I can't say I've ever tried.
Anyway, getting your hands on the firmware is easy. Just use SamFirm (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647)
To use it, just input the model number (SM-G920R7/R4/P/V/T/A) and the region code, then select "auto".
Region codes and model numbers:
C-Spire: ACG (SM-G920R7)
US-Cellular: USC (SM-G920R4)
Sprint: SPR (SM-G920P)
Verizon: VZW (Locked out from download, app can't download) (SM-G920V)
T-mobile: TMB (SM-G920T)
ATT: ATT (Locked out from download, app can't download) (SM-G920A)
This app downloads firmwares directly from Samsung servers, so the download is really fast and guaranteed to be perfect/stock.
**the SM-G920R7 is closest related to the SM-G920R4 (US Cellular) & SM-G920P (Sprint). The US Cellular one recently supports GSM Bands natively without any rooting/messing with hidden settings, so that's where i'd start. You may not even need the baseband/modem, just flash the rom? I'm not sure. Good luck dude It'd be awesome if you get it working
*** Also, make sure you have a backup of your EFS before messing with the modem. Apparently if you flash an incompatible modem you can erase/corrupt the EFS partition and lose your IMEI. Hell, make a FULL backup with TWRP, and make sure that backup is copied over to your computer before doing any flashing. You can't be too careful with this.
Haven't had any luck flashing stock firmware or modems from other models using Odin, errors with a security message or something, tried G920A and G920R4. Probably for the best I suppose. Flashing custom roms has not been a problem, even if the don't work properly. Wonder if there is a test mode or way to use logcat to see why calls don't proceed like normal. Never worked on going CDMA to GSM before, I always did CDMA to CDMA in the past.
Hi,
I bought a SM-G930VL (tracphone branded, but verizon compatible) galaxy s7 for a pretty good price, however the advanced and wifi calling were not options (even though verizon told me they were before I purchased). I decided I would try to flash the VZW firmware from sammobile through odin, but it did not work. It originally gave me the ext4 error, but then flashing the csc fixed that. I then flashed the AP file, but it finished very quickly (about 3.5 min) and now will only boot into recovery when powered up.
Is there anything I can do to save my phone, or have I permanently screwed it up?
Thanks
holy sh*t got it working. Flashed the BL, AP, CP, and CSC files and it booted to welcome screen!!
Thanks all (and hopefully this helps anyone in the future who runs into this predicament)
It is currently checking wifi connection so hopefully all is well!
Edit: Is there a way to edit the title? That way this could be maybe help the next person rather than getting ignored.
whatnow275 said:
holy sh*t got it working. Flashed the BL, AP, CP, and CSC files and it booted to welcome screen!!
Thanks all (and hopefully this helps anyone in the future who runs into this predicament)
It is currently checking wifi connection so hopefully all is well!
Edit: Is there a way to edit the title? That way this could be maybe help the next person rather than getting ignored.
Click to expand...
Click to collapse
Hi, want to ask a few questions. were you able to fully flash the Verizon firmware to this model with no issues? The phone is also supposed to be factory unlocked per my connections with reps.
Did the phone fully change to a SM-G930V, showing in settings and in Odin mode?
Yes I was able to fully flash Verizon and I have working wifi calling and advanced calling. In settings it shows up as V not VL as well. As far as I understand it is the exact same hardware just different software running on it
Sent from my iPhone using Tapatalk
whatnow275 said:
Yes I was able to fully flash Verizon and I have working wifi calling and advanced calling. In settings it shows up as V not VL as well. As far as I understand it is the exact same hardware just different software running on it
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Great, i flashed one yesterday for a friend via teamviewer and even changed the model as SM-G930V in odin mode. So I guess due to this the phone has now a locked bootloader and ended up being converted to a full Verizon galaxy S7. Only thing it did not take his Metro PCS sim card. Unsure it would take any other carrier sim cards.
aromerblz said:
Great, i flashed one yesterday for a friend via teamviewer and even changed the model as SM-G930V in odin mode. So I guess due to this the phone has now a locked bootloader and ended up being converted to a full Verizon galaxy S7. Only thing it did not take his Metro PCS sim card. Unsure it would take any other carrier sim cards.
Click to expand...
Click to collapse
Was the boot loader originally unlockable? I was under the impression that all SD versions were locked down right. That's great that you got it to work also!
Sent from my iPhone using Tapatalk
whatnow275 said:
Was the boot loader originally unlockable? I was under the impression that all SD versions were locked down right. That's great that you got it to work also!
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
It seems it was as it allowed me to flash the verizon bootloader and full firmware. Normally tracfones only allow to flash part of a firmware and rejects all bootloader partitions.
Is bootloader locked after flash g930v firmware. Or can I flash back to straight talk?
Cherb1990 said:
Is bootloader locked after flash g930v firmware. Or can I flash back to straight talk?
Click to expand...
Click to collapse
haven't tried flashing back as have no reason for that. To top it off the firmware has not been released yet.
aromerblz said:
haven't tried flashing back as have no reason for that. To top it off the firmware has not been released yet.
Click to expand...
Click to collapse
I'm currently on Verizon switching to T-Mobile this week. Is it possible to flash to G930T? I flashed g930VL to G930V. But wasnt sure if I could. If of the phone would be compatible with T-Mobile
Cherb1990 said:
I'm currently on Verizon switching to T-Mobile this week. Is it possible to flash to G930T? I flashed g930VL to G930V. But wasnt sure if I could. If of the phone would be compatible with T-Mobile
Click to expand...
Click to collapse
There were reports of someone flashing the phone to an SM-G930U (Unlocked US S7). So apparently they are interflashable. I however have not gone to that extent as am yet to get my one to thinker with. I flashed previously to a SM-G930V via teamviewer for a friend. You can search the threads and verify.
Read here:
http://forum.xda-developers.com/tmo...0t1-metro-pcs-flashed-g930t-firmware-t3358941
aromerblz said:
Great, i flashed one yesterday for a friend via teamviewer and even changed the model as SM-G930V in odin mode. So I guess due to this the phone has now a locked bootloader and ended up being converted to a full Verizon galaxy S7. Only thing it did not take his Metro PCS sim card. Unsure it would take any other carrier sim cards.
Click to expand...
Click to collapse
You probably figured it by now, but MetroPCS is the only retarded carrier that locks SIM to IMEI. So if you want to use MetroPCS on any other phone than the one you currently have it on, you need to call customer service and give them your new phone's IMEI. Then your new phone will start working. If you want to switch back to your old MetroPCS phone you need to call them again and give them that IMEI, which is retarded. I don't know why they do that but it's really annoying if you frequently switch phones.
I have a 935V (S7 Edge Verizon) and now have 935U ROM on it using Tracfone. Initially I have Tracfone's Verizon service but I wanted the freedom to easily move from one phone to another so I converted it to a Tracfone-GSM(ATT) and been using it in my Verizon S7 Edge (with 935U ROM) and iPhone SE without any problem.
whatnow275 said:
Hi,
I bought a SM-G930VL (tracphone branded, but verizon compatible) galaxy s7 for a pretty good price, however the advanced and wifi calling were not options (even though verizon told me they were before I purchased). I decided I would try to flash the VZW firmware from sammobile through odin, but it did not work. It originally gave me the ext4 error, but then flashing the csc fixed that. I then flashed the AP file, but it finished very quickly (about 3.5 min) and now will only boot into recovery when powered up.
Is there anything I can do to save my phone, or have I permanently screwed it up?
Thanks
Click to expand...
Click to collapse
Could you add links to everything you used? I have the same model using straight talk and I want to be able to have a backup firmware to flash in case I ever mess up my phone (which seems to be a trend). And have you had any issues at all? Like, does everything work okay?
whatnow275 said:
Hi,
I bought a SM-G930VL (tracphone branded, but verizon compatible) galaxy s7 for a pretty good price, however the advanced and wifi calling were not options (even though verizon told me they were before I purchased). I decided I would try to flash the VZW firmware from sammobile through odin, but it did not work. It originally gave me the ext4 error, but then flashing the csc fixed that. I then flashed the AP file, but it finished very quickly (about 3.5 min) and now will only boot into recovery when powered up.
Is there anything I can do to save my phone, or have I permanently screwed it up?
Thanks
Click to expand...
Click to collapse
I too would like to know if you could please provide links. Im rather new to this, the only other phone ive ever flashed rooted and put custom rom on was a Evo. But alls im looking to do is get my s7 rooted and it would be nice to have it flashed to Verizon first seeing as there root guide is for verison phone and firmware.
Dano5674 said:
I too would like to know if you could please provide links. Im rather new to this, the only other phone ive ever flashed rooted and put custom rom on was a Evo. But alls im looking to do is get my s7 rooted and it would be nice to have it flashed to Verizon first seeing as there root guide is for verison phone and firmware.
Click to expand...
Click to collapse
It's been a very long time but I'll try to remember lol. Been in iPhone land for about a year (now I'm back with the good guys tho )
Help lol
whatnow275 said:
It's been a very long time but I'll try to remember lol. Been in iPhone land for about a year (now I'm back with the good guys tho )
Click to expand...
Click to collapse
I bricked my SM-930VL too and it's not letting me flash anything back to stock. No clue what to do
I recently received a T-Mobile Galaxy S6, and it was rooted and had a custom kernel, which was a complete mess (the person who owned the phone previously clearly did not know what they were doing) so I just wanted to restore it back to full stock.
I am decently experienced with ODIN, rooting, custom firmware etc, but I have just done one of the biggest rookie mistakes I have ever done. I had accidentally downloaded the most recent firmware for my G920T, not realizing that the file was not for T-Mobile. It was the (XAR) carrier (I believe that is C-Spire but i could be wrong) and the latest was PK1.
It flashed perfectly and all seemed fine until I decided to unlock the device. The T-Mobile S6 requires the use of the "Device Unlock" app and since I had flashed the wrong ROM, the phone thinks the Device Unlock app is not compatible. When I put a different GSM SIM card in the phone, it prompts me to use the Device Unlock app.
I do not have a previous NANDROID backup from the original T-Mobile ROM, and now that I am on the lastest Bootloader for XAR, it will not let me downgrade. I have tried flashing pretty much every MM bootloader and TWRP for both T-Mobile and XAR and none will work (except for what is currently on the device of course) I always get the error "Device: 5 Binary: 4" (sometimes the binary is 3, depending on which version of MM rom or BL I try)
To sum it all up, I am on PK1 (latest for XAR) and I need a way to get back to the official T-Mobile ROM (latest is PD1). Is there a magic method to get this figured out or am I pretty much stuck with what I got until T-Mobile releases an update that is PK1 or higher?
Thank you in advance to all of you that take your time to help (and I am sincerely sorry if I am posting in the wrong section)
EDIT:
I was able to fix it! I had to install a custom ROM to obtain root and delete my EFS partition.
So, here is a bit of a story I will try to keep short.
I went to Vietnam and bought a S8+ from there.
It was a US S8+ from Sprint.
I used it fine there but when I came back to states I tried to put my Verizon sim in and it doesn't work.
I don't get any signal. But I am able to see Baseband and IMEI.
So, I tried to use Odin and flash one of the SM-G955U1 Firmware.
Now, my phone is weird and out with no Baseband or IMEI.
So I try to flash back to firmware it was on.
Same thing.
Any ideas why my S8+ is like this?
MLIGN said:
So, here is a bit of a story I will try to keep short.
I went to Vietnam and bought a S8+ from there.
It was a US S8+ from Sprint.
I used it fine there but when I came back to states I tried to put my Verizon sim in and it doesn't work.
I don't get any signal. But I am able to see Baseband and IMEI.
So, I tried to use Odin and flash one of the SM-G955U1 Firmware.
Now, my phone is weird and out with no Baseband or IMEI.
So I try to flash back to firmware it was on.
Same thing.
Any ideas why my S8+ is like this?
Click to expand...
Click to collapse
Can you get into recovery/download mode now? What was the last known version of software you know that was on your phone?
If you can get into recovery, what info are in those details?
JeffDC said:
Can you get into recovery/download mode now? What was the last known version of software you know that was on your phone?
If you can get into recovery, what info are in those details?
Click to expand...
Click to collapse
Sorry for the long wait. If you are still interested.
CARRIER: SPR
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: OFF
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
RP SWREV : B3(1,1,1,1,1) K2 S3
SECURE DOWNLOAD: ENABLE
DID: 205EDC8B7351
- duplicate
MLIGN said:
- duplicate
Click to expand...
Click to collapse
What happens if you restore from the OEM function?
Try downloading custom recovery and flashing a custom rom. You will lose samsung pay but you might have a working phone it's a chance I would take if it was me. Your baseband is messed up try just flashing your carrier baseband . These are just ideas good luck
Sent from my [device_name] using XDA-Developers Legacy app
If flashing a custom ROM will fix your phone then so will downloading latest official Samsung ROM and flashing via latest Odin .
The second option above would be the best to try unless you're happy to have a custom rom and lose Samsung pay and anything that relies on Knox being functional
paul_59 said:
If flashing a custom ROM will fix your phone then so will downloading latest official Samsung ROM and flashing via latest Odin .
The second option above would be the best to try unless you're happy to have a custom rom and lose Samsung pay and anything that relies on Knox being functional
Click to expand...
Click to collapse
Update on the post, I sent it into Samsung. I should hear word soon if they can fix it and how much if anything.
Jtag dead phone to life and rewrite IMEI
First of all my phone is the s8+ G955fd, but I am sure that the people that helped me can help most Samsung owners with bricked phones.
My phone ended up being stuck on the first boot screen, I couldn't get into recovery or download mode. I installed TWRP and after that I lost my IMEI numbers( dual sim), so I tried to reflash stock and thats when i became bricked. I searched someone to help and found reference to the Fonefunshop in England. I sent it there and they said that the eMMC chip was bad. I searched for someone who could write to it or put a new one on the motherboard . I found A2Z cellular in Ottawa Canada. They used jtag to restore it to stock and they told me that the Fonefunshop had not opened the phone which is necessary to use jtag as they claimed, so avoid them.
The phone was now back doing everything it should except the IMEI's were null like before. I gave them the original IMEI's and the phone is working like new.
If your Samsung is bricked these guys can probably fix it and it won't cost much to find out.
the SM-G955U has a locked bootloader, so people should not be telling you to flash a custom recovery or custom ROMs. there is only one way to get root on this phone, through the samfail exploit, and safestrap is the only working recovery. I don't believe it supports CDMA networks but I'm not 100% sure on that. I have this device and I'm only aware of GSM carriers using it.
Just an update on this issue. I still don't have a working Baseband or IMEI. Any clues?
I was able to fix it! I had to install a custom ROM to obtain root and delete my EFS partition via ADB.
MLIGN said:
I was able to fix it! I had to install a custom ROM to obtain root and delete my EFS partition via ADB.
Click to expand...
Click to collapse
Hi. Can you detail how you fixed you phone please? What custom rom did you use and the steps you used please? I have the same phone with the same problem.
Thanks
MLIGN said:
I was able to fix it! I had to install a custom ROM to obtain root and delete my EFS partition via ADB.
Click to expand...
Click to collapse
Be very careful with doing that. It can cause the EFS (the partition that controls IMEI, Mac and a few other things) to be completely corrupted. Which will cause the device to be useless without fixing it.
Now a little heads up. As messing with the IMEI is illegal in many countries (the US being one of them) There are only 2 ways to fix an IMEI issue allowed on XDA.
1. Restore the backed up EFS partition
2. Return it to the OEM to be repaired.
What did you do after you deleted EFS? I can delete in Combination but I dont get the IMEI number back.
Please I need all XDA members assist ,because of I mistake delete EFS with combination file on my G955U VZW , I have null imei number, then I repair it by flash qcn with z3x Samsung tool , but still I have IMEI number but emergency call only is still display without service ,