Database Info

[SM-G920R7] S6 Thread

My goal would be to install Cyanogenmod on my SM-G920R7, but haven't been able to find too much help. Any of the rooting methods that seem to work on rest of the S6 variants, doesn't seem to work on this one. There is no TWRP available that I know of.
I would really appreciate any possible help. Thanks in advance.

i have the same problem
I think that this version of the s6 (the cspire version) isn't widely available enough and no one has bothered to make a root for it - ive been searching for a long time and still haven't found anything

I'd like to at least be able to root this thing.. On 5.1.1 now.

I have a rooted cellphone of this version (I purchased it rooted), is there any workaround to unlock GSM/LTE bands on this device?
----
Edit... Okay, so I went back to fresh stock with SmartSwitch, then flashed twrp-3.0.0-0-zerofltespr and Unikernel-v9b-BOH1-920P-100815 via odin 3.10.7, and rooted again... any method to enable gsm on this device yet?

jfarreola said:
I have a rooted cellphone of this version (I purchased it rooted), is there any workaround to unlock GSM/LTE bands on this device?
----
Edit... Okay, so I went back to fresh stock with SmartSwitch, then flashed twrp-3.0.0-0-zerofltespr and Unikernel-v9b-BOH1-920P-100815 via odin 3.10.7, and rooted again... any method to enable gsm on this device yet?
Click to expand...
Click to collapse
How exactly did you root it again? Was it SM-G920R7?

phreak311 said:
How exactly did you root it again? Was it SM-G920R7?
Click to expand...
Click to collapse
Yes, it was SM-G920R7... first, I flashed twrp-3.0.0-0-zerofltespr , then Unikernel-v9b-BOH1-920P-100815 , both via ODIN (you can google both files), note these files are NOT for r7 version (they're for sprint version *g920p*) but they'll root the phone.
I ended up getting rid of the phone as there's afaik no way to enable gsm on it

jfarreola said:
Yes, it was SM-G920R7... first, I flashed twrp-3.0.0-0-zerofltespr , then Unikernel-v9b-BOH1-920P-100815 , both via ODIN (you can google both files), note these files are NOT for r7 version (they're for sprint version *g920p*) but they'll root the phone.
I ended up getting rid of the phone as there's afaik no way to enable gsm on it
Click to expand...
Click to collapse
That's not true. I finally rooted that model and got TWRP installed, and followed the steps to get the Sprint Galaxy S4 domestic SIM unlocked. I finally got data and texting working last night, but I can't get calls to work for some reason on an AT&T SIM card. It even shows up at AT&T as my provider. AFIK it is now SIM unlocked, the only thing not working is calls like I said. I'm sooooo close to getting this working. I need people with this phone that are doing the same thing i'm doing! I only paid $50 for it! lol

Can u help me get mine unlocked , ive already rooted the phone.

shykidd said:
Can u help me get mine unlocked , ive already rooted the phone.
Click to expand...
Click to collapse
How did you root the phone thanks for any help

phreak311 said:
That's not true. I finally rooted that model and got TWRP installed, and followed the steps to get the Sprint Galaxy S4 domestic SIM unlocked. I finally got data and texting working last night, but I can't get calls to work for some reason on an AT&T SIM card. It even shows up at AT&T as my provider. AFIK it is now SIM unlocked, the only thing not working is calls like I said. I'm sooooo close to getting this working. I need people with this phone that are doing the same thing i'm doing! I only paid $50 for it! lol
Click to expand...
Click to collapse
What model did you use and what recovery to root phone

makemesmile said:
What model did you use and what recovery to root phone
Click to expand...
Click to collapse
use root for sprint or us cellular

DEXEIL said:
use root for sprint or us cellular
Click to expand...
Click to collapse
What model will work with my phone I have my backup for if something goes wrong but if I charge the recovery and have some type of issue can I use the stock rom again thanks for your help I had a gs3 rooted and really like it now I got the sm-920r7 what model with sprint or us cellular will work

Root sm-g920r7
lazydude said:
my goal would be to install cyanogenmod on my sm-g920r7, but haven't been able to find too much help. Any of the rooting methods that seem to work on rest of the s6 variants, doesn't seem to work on this one. There is no twrp available that i know of.
I would really appreciate any possible help. Thanks in advance.
Click to expand...
Click to collapse
use the cf auto root download this use google to search first one that comes up use that link go to model sm-g920p cspire and sprint uses
the same network . Use odin to install i have same phone and have mine rooted in this way. So far tried using the sprint version custom rom it will work but you can make phone calls but not the data side for phone internet.
---------- Post added at 04:09 PM ---------- Previous post was at 03:57 PM ----------
makemesmile said:
how did you root the phone thanks for any help
Click to expand...
Click to collapse
use the cf auto root download this use google to search first one that comes up use that link go to model sm-g920p cspire and sprint uses
the same network . Use odin to install i have same phone and have mine rooted in this way. So far tried using the sprint version custom rom it will work but you can make phone calls but not the data side for phone internet. Make sure you go to phone settings under find my phone and turn off reactivation lock

Any way to get the G920P roms to work on this variant? I've had luck with them with other c-spire/ntelos/r7 phones in the past. I'd like to flash Renegade to it...

blazie151 said:
Any way to get the G920P roms to work on this variant? I've had luck with them with other c-spire/ntelos/r7 phones in the past. I'd like to flash Renegade to it...
Click to expand...
Click to collapse
It works but the phone data Internet won't work can make phone calls and sprints annoying activation keeps posing up and even tried the pit file for cspire no change on that
Sent from my SM-G920R7 using Tapatalk

Wonder if anyone has got calls working using GSM sim card? I have the cspire G920R7 rooted with LTE data working using AT&T sim.
Won't receive calls (straight to vmail) and when placing calls dialer says CALL ENDED immediatly after dialing.
hmmm.

TEC602 said:
Wonder if anyone has got calls working using GSM sim card? I have the cspire G920R7 rooted with LTE data working using AT&T sim.
Won't receive calls (straight to vmail) and when placing calls dialer says CALL ENDED immediatly after dialing.
hmmm.
Click to expand...
Click to collapse
I'm working on this too. So far I've got the same situation as you, Data works but no calls/text.
in a few weeks the person who wants me to unlock this phone for them is switching carriers and plans on buying a new phone to use until I can unlock the S6, so I'll have more time to mess with it then.
There's a few things I want to try, but I can't post links here (XDA rules).
One involves Rooting and using a service code to unlock the bands (google "TeamUSCellular GSM unlock S6")
The other also requires rooting and involves using "galaxy tools" to unlock the bands (not sure if this app works with marshmallow, though) (google "theandroidsoul how to sim unlock sprint galaxy S6")
My hopes are not high for getting this phone to work fully. I've also been trying to get custom ROMs to work, but I can't get the cell radio to work at all on custom ROMs. Even with the stock SM-G920R7 Kernel straight from the latest update .tar

Sean89us said:
I'm working on this too. So far I've got the same situation as you, Data works but no calls/text.
.......
Click to expand...
Click to collapse
Thanks for the suggestion, yeah I have tried galaxy tools (GT) to change the phone mode to LTE/GSM auto and tried different CSC values, and accessed the hidden menus through there. The sim unlock in GT asks for a code which I dont know, but the phone doesn't seem to be locked anyway since it doesn't care when I try different sim cards. Weird thing is the GT app doesn't work very well (most hidden menus not working) on the current rom i'm using but worked better on the stock cspire rom. Note, I tried using MSL 000000 in ##3282# data menu and it works but most the settings in there don't seem to be applicable to GSM networks.
Currently I'VE been messing with the build.prop file, also tried the CDMA to GSM flashable zip which edits the build.prop but nothing has gotten better. One time after editing the build.prop the phone would only turn on with a blank screen and vibrate every few seconds, that was SCARY. Also was planning on flashing other radio/modem but having trouble finding many of those files and pulling them from roms seems difficult to get the correct file to flash on odin.

TEC602 said:
Thanks for the suggestion, yeah I have tried galaxy tools (GT) to change the phone mode to LTE/GSM auto and tried different CSC values, and accessed the hidden menus through there. The sim unlock in GT asks for a code which I dont know, but the phone doesn't seem to be locked anyway since it doesn't care when I try different sim cards. Weird thing is the GT app doesn't work very well (most hidden menus not working) on the current rom i'm using but worked better on the stock cspire rom. Note, I tried using MSL 000000 in ##3282# data menu and it works but most the settings in there don't seem to be applicable to GSM networks.
Currently I'VE been messing with the build.prop file, also tried the CDMA to GSM flashable zip which edits the build.prop but nothing has gotten better. One time after editing the build.prop the phone would only turn on with a blank screen and vibrate every few seconds, that was SCARY. Also was planning on flashing other radio/modem but having trouble finding many of those files and pulling them from roms seems difficult to get the correct file to flash on odin.
Click to expand...
Click to collapse
I'm not sure you'll even be able to flash other models' modem..? I can't say I've ever tried.
Anyway, getting your hands on the firmware is easy. Just use SamFirm (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647)
To use it, just input the model number (SM-G920R7/R4/P/V/T/A) and the region code, then select "auto".
Region codes and model numbers:
C-Spire: ACG (SM-G920R7)
US-Cellular: USC (SM-G920R4)
Sprint: SPR (SM-G920P)
Verizon: VZW (Locked out from download, app can't download) (SM-G920V)
T-mobile: TMB (SM-G920T)
ATT: ATT (Locked out from download, app can't download) (SM-G920A)
This app downloads firmwares directly from Samsung servers, so the download is really fast and guaranteed to be perfect/stock.
**the SM-G920R7 is closest related to the SM-G920R4 (US Cellular) & SM-G920P (Sprint). The US Cellular one recently supports GSM Bands natively without any rooting/messing with hidden settings, so that's where i'd start. You may not even need the baseband/modem, just flash the rom? I'm not sure. Good luck dude It'd be awesome if you get it working
*** Also, make sure you have a backup of your EFS before messing with the modem. Apparently if you flash an incompatible modem you can erase/corrupt the EFS partition and lose your IMEI. Hell, make a FULL backup with TWRP, and make sure that backup is copied over to your computer before doing any flashing. You can't be too careful with this.

Haven't had any luck flashing stock firmware or modems from other models using Odin, errors with a security message or something, tried G920A and G920R4. Probably for the best I suppose. Flashing custom roms has not been a problem, even if the don't work properly. Wonder if there is a test mode or way to use logcat to see why calls don't proceed like normal. Never worked on going CDMA to GSM before, I always did CDMA to CDMA in the past.

Convert SM-G930T to SM-G930A so I can use AT&T LTE bands.

Hi All, I want to continue using my AT&T prepaid plan but I recently bought a locked T-Mobile Galaxy S7 SM-G930T (I'm going to try to unlock it - if that doesn't work this is all moot). I would like to flash AT&T firmware so I can use the AT&T LTE bands. Can I follow the instructions in the link below once I've unlocked a T-Mobile SM-G930T and turn it into a SM-G930A?
http://www.droidviews.com/nougat-firmware-on-att-galaxy-s7s7-edge-sm-g930a-g935a/
I've read the link below... but it seems to be only if you want to continue using T-Mobile service which I don't.
https://forum.xda-developers.com/tm...w-to-flash-att-nougat-to-t-mobile-s7-t3553610

Changing firmware doesn't have anything to do with what bands the hardware supports. Unlock it and throw the ATT SIM in. Only difference is carrier supported features and software (wifi calling, etc). Flashing ATT modem might improve coverage but all S7 support the same bands.

Thanks buddy for the reply. I'm used to using a custom ROM on my Android phones so this is new. Mostly CyanogenMod.
That's good to know I don't need to flash in order to get the bands but I understand I need to if I want OTA updates from at&t. It seems relatively simple that you just flash the AT&T ROM over the T-Mobile with Odin and then use some update file. It doesn't even effect Samsung pay and Knox which is great.
Stupid question: is the AT&T modem included with the AT&T rom? Also, with regards to the 2nd link in the OP what is the update file that you put on the sdcard to use in recovery - is that an OTA update because your ROM is different from your carrier?

madadhd said:
Thanks buddy for the reply. I'm used to using a custom ROM on my Android phones so this is new. Mostly CyanogenMod.
That's good to know I don't need to flash in order to get the bands but I understand I need to if I want OTA updates from at&t. It seems relatively simple that you just flash the AT&T ROM over the T-Mobile with Odin and then use some update file. It doesn't even effect Samsung pay and Knox which is great.
Stupid question: is the AT&T modem included with the AT&T rom? Also, with regards to the 2nd link in the OP what is the update file that you put on the sdcard to use in recovery - is that an OTA update because your ROM is different from your carrier?
Click to expand...
Click to collapse
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file

muniz_ri said:
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file
Click to expand...
Click to collapse
i have METROPCS Phone SM-G930T1 Nougat, already unlocked since i live in mexico...is there a international rom to flash?? i wanna convert my s7 to a non carrier rom IN ADVANCE THANKS 4 YOUR HELP!

muniz_ri said:
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file
Click to expand...
Click to collapse
I don't get why you would do this other than to have ATT bloat over TMO bloat (IMHO TMO has less bloat than ATT). There's no technical advantage. Am I missing something?

A0425A said:
I don't get why you would do this other than to have ATT bloat over TMO bloat (IMHO TMO has less bloat than ATT). There's no technical advantage. Am I missing something?
Click to expand...
Click to collapse
The amount of bloatware is irrelevant since you can freeze all bloatware on either build. I experienced many issues on the TMo version including issues with Android Auto, Google Assistant, and Tasker. I thought these apps were buggy but all of those issues were resolved on the AT&T version. The AT&T version seems to be a better, bug-free build.

muniz_ri said:
The amount of bloatware is irrelevant since you can freeze all bloatware on either build. I experienced many issues on the TMo version including issues with Android Auto, Google Assistant, and Tasker. I thought these apps were buggy but all of those issues were resolved on the AT&T version. The AT&T version seems to be a better, bug-free build.
Click to expand...
Click to collapse
Read that in a different thread you posted to after I responded. I think it's very YMMV though. But if you saw improvement then ??

Hi, did anyone ever complete this flash from SM-G930T to SM-G930A? I'd like to do this solely to try and get the wifi calling feature since my workplace has poor cell service but great wifi. I bought the T-Mobile phone, unlocked it, put the ATT sim in and everything but wifi calling works fine. I appreciate the reply!

This is much later in the year (11-8-2021) and ATT has posted the list of phone they say will work and it only shows G930A. It seems their test of working means it must have been sold by ATT. They say My G930T won't work. So Will ATT continue to use customer's unlocked phones it they were not orginally sold by ATT. They have the records. Will ATT refuse to use one of their SIMs even if the phone is Flashed to ATT logo. I do not want to throw away my G930T phone.

muniz_ri said:
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file
Click to expand...
Click to collapse
Hello and thank you. You posted this information and link back in 2017 and so much has changed. Mostly ATT is now working hard to get rid of all 3G towers and firing up 5G. They said my Galaxy S7-GM930T would not work so I think they link you posted will help me convert the phone back to a GM930A or U or U1. My question is,..Has anything in your post changed since 2017 and if so could you please advise me of what I need to do. Thanks very much.

trigger1937 said:
Hello and thank you. You posted this information and link back in 2017 and so much has changed. Mostly ATT is now working hard to get rid of all 3G towers and firing up 5G. They said my Galaxy S7-GM930T would not work so I think they link you posted will help me convert the phone back to a GM930A or U or U1. My question is,..Has anything in your post changed since 2017 and if so could you please advise me of what I need to do. Thanks very much.
Click to expand...
Click to collapse
They sent you a message saying the phone won't work?

[FIRMWARE] G950U1 Unlocked AT&T QK2

As of this writing (11/29/2017) this is the latest firmware for the G950U1 att unlocked S8 . I'm leaving this here for reference so people can return to it if/when they need it.
Download, extract, remove .md5 file name off the end of each file, flash.
G950U1UEU2AQK2 (This WILL update your bootloader so after this, no going to QH3 or before. Not that you'd have a reason to)
https://drive.google.com/open?id=1gvQ0kaZTwbEYe2jvuIa05pCvwkS4ddtg

joe3681 said:
As of this writing (11/29/2017) this is the latest firmware for the G950U1 att unlocked S8 . I'm leaving this here for reference so people can return to it if/when they need it.
Download, extract, remove .md5 file name off the end of each file, flash.
G950U1UEU2AQK2 (This WILL update your bootloader so after this, no going to QH3 or before. Not that you'd have a reason to)
https://drive.google.com/open?id=1gvQ0kaZTwbEYe2jvuIa05pCvwkS4ddtg
Click to expand...
Click to collapse
you donnt need to remove the .md5
you will need modded odin though.

mweinbach said:
you donnt need to remove the .md5
you will need modded odin though.
Click to expand...
Click to collapse
You don't need to no, but it speeds up the process. I'm just posting firmware not making a hand holding tutorial. There's enough of those around

Thanks Joe I was tired of returning all the way back to the beginning and getting all those new updates on my unlocked S8

joe3681 said:
You don't need to no, but it speeds up the process. I'm just posting firmware not making a hand holding tutorial. There's enough of those around
Click to expand...
Click to collapse
Yeah and on a Mac you do need to, or it freezes Odin completely

If I flash unbranded FW on a carrier specific device, loke tmo or att for example, would it sim unlock the phone?
If I flash tmo FW on an att s8 would it in turn allow me to use the att original device on tmo? I ask these questions because I feel like it would work for both my questions since flashing the FW flashes both boot, kernel and baseband/radio. The which is needed for signal. Just some theories but would love to know the answers.
Btw, I have a F model S8+ and was planning on buying some US branded devices so I was curious.

this.guy.lol said:
If I flash unbranded FW on a carrier specific device, loke tmo or att for example, would it sim unlock the phone?
If I flash tmo FW on an att s8 would it in turn allow me to use the att original device on tmo? I ask these questions because I feel like it would work for both my questions since flashing the FW flashes both boot, kernel and baseband/radio. The which is needed for signal. Just some theories but would love to know the answers.
Btw, I have a F model S8+ and was planning on buying some US branded devices so I was curious.
Click to expand...
Click to collapse
No, it will not unlock the phone (Note: Verizon phones are factory unlocked and remain that way after a firmware flash)
Yes, you can flash any carriers FW to a US S8 and use it with a different carrier.

So I understand, your saying if I flash att FW to a T-Mobile s8 I can use it on tmobile? If that is the case, to me that's an unlock of sorts tiny book lol. Just wanna make sure is all

Deleted

this.guy.lol said:
So I understand, your saying if I flash att FW to a T-Mobile s8 I can use it on tmobile? If that is the case, to me that's an unlock of sorts tiny book lol. Just wanna make sure is all
Click to expand...
Click to collapse
You can flash att firmware and use it on TMobile but it will still be locked to TMobile. Just running att firmware.

joe3681 said:
You can flash att firmware and use it on TMobile but it will still be locked to TMobile. Just running att firmware.
Click to expand...
Click to collapse
Just realized the typo.....what I meant was, if I flash ATT on a TMO variant I can use ATT while locked to tmo? I'm very unfimiar with combination fw and always opted for the UK models for alot of reasons. Sorry for the confusion of my op question. I know on the s7 and edge if you flashed the US unlocked firmware it not only removed AOL bloat but it unlocked the device. So that is why I ask.

this.guy.lol said:
Just realized the typo.....what I meant was, if I flash ATT on a TMO variant I can use ATT while locked to tmo? I'm very unfimiar with combination fw and always opted for the UK models for alot of reasons. Sorry for the confusion of my op question. I know on the s7 and edge if you flashed the US unlocked firmware it not only removed AOL bloat but it unlocked the device. So that is why I ask.
Click to expand...
Click to collapse
I had a TMobile S7 edge and flashing unlocked firmware never unlocked the device. That's handled by TMobile servers so...
Flashing unlocked firmware will give you just that. The smoother, bloat free firmware from another device but not the actual sim unlock.

I bought an unlocked device and wanted wifi calling so I flashed the g950usqs1aqf7 att firmware with Odin and it worked to enable wifi calling but I'm unable to get any ota updates and I hate the bloat. Is it possible to get WiFi calling with an unlocked firmware like this one? Also what is the difference between the U and U1 firmware variants?

maquino1985 said:
I bought an unlocked device and wanted wifi calling so I flashed the g950usqs1aqf7 att firmware with Odin and it worked to enable wifi calling but I'm unable to get any ota updates and I hate the bloat. Is it possible to get WiFi calling with an unlocked firmware like this one? Also what is the difference between the U and U1 firmware variants?
Click to expand...
Click to collapse
There are plenty of threads on this, but I don't think anyone was ever successful. I flashed att Oreo to my u1 and got the options, but can't get my company to change my imei back.... My personal phone sim works fine. Quit at that point since it's an Ims registration error. You can try merging the wifi calling apks, but I'm pretty sure it's baked pretty deep in the os. The Verizon guys got some of it working. You can try their threads and see if any of it applies to us.

twizt3d said:
There are plenty of threads on this, but I don't think anyone was ever successful. I flashed att Oreo to my u1 and got the options, but can't get my company to change my imei back.... My personal phone sim works fine. Quit at that point since it's an Ims registration error. You can try merging the wifi calling apks, but I'm pretty sure it's baked pretty deep in the os. The Verizon guys got some of it working. You can try their threads and see if any of it applies to us.
Click to expand...
Click to collapse
Thanks. Some threads made it sound possible but inconclusive. I'll just assume it doesn't work.
BTW, can you link to the att oreo fw? And what do u flash that with Odin or comsey?

The thread right below this one entitled Oreo ota has all the details and it needs to be side loaded through adb. Not Odin. But you will need to Odin the 950u base to get off u1

twizt3d said:
The thread right below this one entitled Oreo ota has all the details and it needs to be side loaded through adb. Not Odin. But you will need to Odin the 950u base to get off u1
Click to expand...
Click to collapse
Ok thanks. I need to flash anyways because I'm having terrible battery issues and just debating whether to go to a newer version of 950u or back to U1 and losing WiFi calling. In your opinion is oreo beta worth it

So just to confirm, I have read everything, but I am just a bit confused. If I flashed the unlocked firmware via modified odin on a locked AT&T S8 it will remove a lot of the carrier bloat and give my my wifi hotspot back, but remove wifi calling. Similar to when I flashed the T-Mobile firmware on my AT&T S7 and got rid of a ton of the AT&T bloatware but was able to activate my wifi hotspot but lost wifi calling. I stay locked to AT&T which is fine that is not my purpose for flashing
---------- Post added at 07:03 AM ---------- Previous post was at 07:01 AM ----------
and can you re-upload the link is dead now

The links don't work. Any chance you've still got the firmware? I've been overseas since october. I have an unlocked AT&T phone that I intend to keep using when I get back, so I want to keep it AT&T FW.

Hi.
I have a G955U Galaxy S8+ AT&T Factory Unlocked on Android 7.0
Baseband Version: G955USQU1AQD9
Android Security Patch Level - April 1, 2017
I no longer live in the US, and currently in the Philippines. Phone works great and the signal is too and all, but I cannot get OTA updates.
Can I just download the firmware file in this thread and flash straight through ODIN, or do I need to follow another guide?

Sprint S8 Active flash to T-Mobile?

So i've read that the sprint version of the S8 Active is on bootloader v5 and the T-Mobile version is bootloader v1. Is it then possible to flash the T-Mobile firmware onto the Sprint Variant ?. The device is already unlocked but i would like Wifi-calling to work for T-Mobile.
Edit 1: Found this and successfully fully flashed from Sprint to T-Mobile(everything works including Wifi Calling). Only works if you are on bootloader version 1.
https://www.youtube.com/watch?v=DEDDTcR1SiQ
I AM NOT THE CREATOR NOR DO I TAKE CREDIT FOR THIS

No apparently the bootloader version must match or be lower so in this case sprint is higher so you can't flash. I've tried and downloaded the tmobile oreo firmware; you'll just get a fail in odin

zed011 said:
No apparently the bootloader version must match or be lower so in this case sprint is higher so you can't flash. I've tried and downloaded the tmobile oreo firmware; you'll just get a fail in odin
Click to expand...
Click to collapse
That is the part i am maybe not understanding. My Sprint S8 active says it is Software version G892USQS1ARC1. Doesn't that mean it is bootloader version 1?

Sorry I was wrong! I actually flashed it! Very happy right now. I was being stupid and using an older version of odin before. Now I successfully flashed sprint to t-mobile oreo with no problems! Use Odin 3.13.1; not prince comsy mod or anything else. So it was bootloader 1 after all; there were some misleading posts without proof. I will trust the software number from now on

zed011 said:
Sorry I was wrong! I actually flashed it! Very happy right now. I was being stupid and using an older version of odin before. Now I successfully flashed sprint to t-mobile oreo with no problems! Use Odin 3.13.1; not prince comsy mod or anything else. So it was bootloader 1 after all; there were some misleading posts without proof. I will trust the software number from now on
Click to expand...
Click to collapse
ARE YOU SERIOUS?!?! Does wifi calling work for you now?

I'm not sure. How can I check? I'm on Fido which is Canadian carrier without WiFi calling. I'm guessing I'm supposed to be looking for a tmobile WiFi calling app. See attachment screenshot for proof. Still recognizes my phone is from sprint

Yeah i just finished flashing it and i get the same as you. Phone still recognized as Sprint and no WiFi calling. Darn. Android 8.0 Oreo is a huge plus however.

zed011 said:
Sorry I was wrong! I actually flashed it! Very happy right now. I was being stupid and using an older version of odin before. Now I successfully flashed sprint to t-mobile oreo with no problems! Use Odin 3.13.1; not prince comsy mod or anything else. So it was bootloader 1 after all; there were some misleading posts without proof. I will trust the software number from now on
Click to expand...
Click to collapse
I think we need to follow this guide to change carrier but the thing is there is no factory binary for the s8 active so this guide won't work until there is one...
https://forum.xda-developers.com/galaxy-s8/how-to/switch-to-carrier-firmware-100-t3609487

Actually I have found and flashed a factory binary trying to change it to T-Mobile. The problem I ran into is they want you to download the firmware with "w" after the model number. That is what I think let's you change the option after typing in the code. That firmware is only for s8 I think(not active as it has the s8 model #). Without flashing that, after I typed in the code the only option I had to choose from was sprint. No "xac" or whatever it was.
If I am not mistaken. The model with the "w" is the Canadian version of the s8. The s8 active is US only I think.

So Im getting ready to pick up a Sprint version to use on Att or Tmobile (good deal). Are you guys seeing any issues after flashing? Thanks

jmill75 said:
So Im getting ready to pick up a Sprint version to use on Att or Tmobile (good deal). Are you guys seeing any issues after flashing? Thanks
Click to expand...
Click to collapse
The only thing I've notice is there is no option for mobile hotspot( i don't think it was there to begin with, i could be wrong however). Other than that it works perfectly. Great battery life and everything. Flash the userdata to get rid of the Sprint Boot animation if you'd like. I did it and now there is just the "Samsung s8 Active" logo, then lock screen. Goodluck.

Mohamed1993 said:
The only thing I've notice is there is no option for mobile hotspot( i don't think it was there to begin with, i could be wrong however). Other than that it works perfectly. Great battery life and everything. Flash the userdata to get rid of the Sprint Boot animation if you'd like. I did it and now there is just the "Samsung s8 Active" logo, then lock screen. Goodluck.
Click to expand...
Click to collapse
Do you have a link by chance to the files? Thanks

After flashing Sprint variant of the device to T-Mobile firmware, do all features work: WiFi Calling, Band 12, VoLTE and Band 71?

Charkatak said:
After flashing Sprint variant of the device to T-Mobile firmware, do all features work: WiFi Calling, Band 12, VoLTE and Band 71?
Click to expand...
Click to collapse
No wifi calling, no VoLTE. Not sure about the bands

Charkatak said:
After flashing Sprint variant of the device to T-Mobile firmware, do all features work: WiFi Calling, Band 12, VoLTE and Band 71?
Click to expand...
Click to collapse
WiFi calling works fine on T-Mobile without flashing to T-Mobile firmware. Only issue is that sometimes it gets stuck enabling WiFi calling requiring a reboot. Band 12 also works, its in the Sprint specifications. The big question I wonder about is if band 71 can be enabled.

flash not working?
i flashed the tmobile firmware and after its all dont i boots up does an update and then boots with all the sprint stuff still

snowfirebeast said:
i flashed the tmobile firmware and after its all dont i boots up does an update and then boots with all the sprint stuff still
Click to expand...
Click to collapse
Did you follow the video I posted?. Ignore all the other comments about things not working. When i updated the OP with the link, it fully flashed the sprint device to T-Mobile. The only thing you have to watch out for, is if your Sprint software is running a new bootloader. You can tell by looking at the baseband version number. This will only work if you are on bootloader 1. My baseband is currently "G892USQS1BRD5". The bootloader version is the 5th character starting from the right. The number 1 before "BRD5".

Running RETUS on a MetroPCS Ocean device

Last night as part of rooting, I was getting issues with the MetroPCS Ocean firmware with the update failing message. I took a look at the RETUS firmwares and saw the latest so I took a chance and was able to flash the Retail version with no problems, booted up and 'worked out of the box' so to speak. It is also lighter on the features since it doesn't include the MetroPCS apps. I am not going to try rooting with this one, but it seems to be quite stable and an a little faster if that makes any sense.
Your mileage may vary!
You assume any risk by attempting the same thing on your device, but I figured it would be something someone would be interested in knowing.

I'm running MetroPCS software on a Amazon device

I'm running Cricket software on a MetroPCS device &
I'm running Amazon software on a MetroPCS device
Cons on both I've come across so far.
Cricket software on a MetroPCS device I get Boot screen says Bad key in top left corner before loading the device.
Amazon software on a MetroPCS device I get a Boot screen says untrusted device before loading the device.
Pros is they both work great.

Medfordite said:
Last night as part of rooting, I was getting issues with the MetroPCS Ocean firmware with the update failing message. I took a look at the RETUS firmwares and saw the latest so I took a chance and was able to flash the Retail version with no problems, booted up and 'worked out of the box' so to speak. It is also lighter on the features since it doesn't include the MetroPCS apps. I am not going to try rooting with this one, but it seems to be quite stable and an a little faster if that makes any sense.
Your mileage may vary!
You assume any risk by attempting the same thing on your device, but I figured it would be something someone would be interested in knowing.
Click to expand...
Click to collapse
Since you did that when you have the time, try to go back a lower build or your OG Build and check if you still have data and sim accses. I ask because (I have a RETUS) and since I flashed the latest one available "PPO29.114-108 May 1 Security Update" can't go back to OG Build it came with without losing data and sim detection. Something was updated in that build that even if you flash back it broke that. I even flashed the modem to check but no still no data or SIM detected at all. Only all fine in the most recent build.

Medfordite said:
Last night as part of rooting, I was getting issues with the MetroPCS Ocean firmware with the update failing message. I took a look at the RETUS firmwares and saw the latest so I took a chance and was able to flash the Retail version with no problems, booted up and 'worked out of the box' so to speak. It is also lighter on the features since it doesn't include the MetroPCS apps. I am not going to try rooting with this one, but it seems to be quite stable and an a little faster if that makes any sense.
Your mileage may vary!
You assume any risk by attempting the same thing on your device, but I figured it would be something someone would be interested in knowing.
Click to expand...
Click to collapse
I am guessing that it is still sim locked to metropcs after flashing this?

twfs said:
I am guessing that it is still sim locked to metropcs after flashing this?
Click to expand...
Click to collapse
Flashing a Carrier or Retail ROM won't ever unlock a Carrier Lock device. If it were that simple don't you think we will ever have this issue. Hell the term network lock won't even exist in a perfect world.
---------- Post added at 03:24 AM ---------- Previous post was at 03:22 AM ----------
twfs said:
I am guessing that it is still sim locked to metropcs after flashing this?
Click to expand...
Click to collapse
And yes there are several Motorola Devices that are firmware interchangeable. Been doing it since the first Moto X times. Only benefit from this procedure no bloatware and faster updates that's it. Oh and better performance since it doesn't include crappware

Medfordite said:
Last night as part of rooting, I was getting issues with the MetroPCS Ocean firmware with the update failing message. I took a look at the RETUS firmwares and saw the latest so I took a chance and was able to flash the Retail version with no problems, booted up and 'worked out of the box' so to speak. It is also lighter on the features since it doesn't include the MetroPCS apps. I am not going to try rooting with this one, but it seems to be quite stable and an a little faster if that makes any sense.
Your mileage may vary!
You assume any risk by attempting the same thing on your device, but I figured it would be something someone would be interested in knowing.
Click to expand...
Click to collapse
PartyDroid said:
I'm running Cricket software on a MetroPCS device &
I'm running Amazon software on a MetroPCS device
Cons on both I've come across so far.
Cricket software on a MetroPCS device I get Boot screen says Bad key in top left corner before loading the device.
Amazon software on a MetroPCS device I get a Boot screen says untrusted device before loading the device.
Pros is they both work great.
Click to expand...
Click to collapse
I'm interested in flashing my MetroPCS g7 stock unrooted to the Amazon rom if you care to point me in the right direction please.

disobey said:
I'm interested in flashing my MetroPCS g7 stock unrooted to the Amazon rom if you care to point me in the right direction please.
Click to expand...
Click to collapse
PSA. If you flsh Cricket, Metro etc Roth the RETUS Latest firmware you won't be able to go back to you LG firmware. That firmware updates the Bootloader and that preventa going back to a lower workifn version. You can doing what I posted earlier by while flashing back to OG Firmware skip flashing modem and fsg bins and don't execute the modem erase commands.

disobey said:
I'm interested in flashing my MetroPCS g7 stock unrooted to the Amazon rom if you care to point me in the right direction please.
Click to expand...
Click to collapse
https://mirrors.lolinet.com/firmware/moto/ocean/official/AMZ/

Ok I bricked my phone via magisk update, I was on MetroPCS variant of Ocean firmware. Now I manually flashed RETUS PPO 29.114-108; It seems to be running fine other than saying my device is not certified....is there a custom recovery that will work for Ocean RETUS using twrp? Should I try to re root using magisk systemless-ly copying boot.img? Thanks for info and any input would be greatly appreciated! Thanks

PartyDroid said:
https://mirrors.lolinet.com/firmware/moto/ocean/official/AMZ/
Click to expand...
Click to collapse
Can we get directions on how you guys are doing this please. I've tried using the back to stock directions but extracting a different firmware but it's not working. I have Metropcs.....I extracted Tmobile firmware and use the back to stock commands...but when rebooting its' still Metropcs....please help with some directions.

nashi20002003 said:
Can we get directions on how you guys are doing this please. I've tried using the back to stock directions but extracting a different firmware but it's not working. I have Metropcs.....I extracted Tmobile firmware and use the back to stock commands...but when rebooting its' still Metropcs....please help with some directions.
Click to expand...
Click to collapse
I'd like to know as well, I got 2 of these Moto G Power 7's from Metro PCS and would love a stock ROM without all the metro bloat. Not sure on Metro's unlocking policy if they will unlock it and what bands this all has if it has CDMA or is it GSM only?

chennault05 said:
Ok I bricked my phone via magisk update, I was on MetroPCS variant of Ocean firmware. Now I manually flashed RETUS PPO 29.114-108; It seems to be running fine other than saying my device is not certified....is there a custom recovery that will work for Ocean RETUS using twrp? Should I try to re root using magisk systemless-ly copying boot.img? Thanks for info and any input would be greatly appreciated! Thanks
Click to expand...
Click to collapse
If I were you I will stay away from Magisk until they update the app, still damaging the boot.img files..

Omar04 said:
Flashing a Carrier or Retail ROM won't ever unlock a Carrier Lock device. If it were that simple don't you think we will ever have this issue. Hell the term network lock won't even exist in a perfect world.
---------- Post added at 03:24 AM ---------- Previous post was at 03:22 AM ----------
And yes there are several Motorola Devices that are firmware interchangeable. Been doing it since the first Moto X times. Only benefit from this procedure no bloatware and faster updates that's it. Oh and better performance since it doesn't include crappware
Click to expand...
Click to collapse
Do you know if there is a way to sim-unlock a Metro device? Searched on eBay, no luck... thanks.

edwardxi said:
Do you know if there is a way to sim-unlock a Metro device? Searched on eBay, no luck... thanks.
Click to expand...
Click to collapse
Note to Admin: I am not sure if this link is allowed if not please remove this message..
https://www.ebay.com/itm/264407271128?ViewItem=&item=264407271128

PartyDroid said:
Note to Admin: I am not sure if this link is allowed if not please remove this message..
https://www.ebay.com/itm/264407271128?ViewItem=&item=264407271128
Click to expand...
Click to collapse
thanks, I found one on eBay for $38... too expensive, used to around $10

nashi20002003 said:
Can we get directions on how you guys are doing this please. I've tried using the back to stock directions but extracting a different firmware but it's not working. I have Metropcs.....I extracted Tmobile firmware and use the back to stock commands...but when rebooting its' still Metropcs....please help with some directions.
Click to expand...
Click to collapse
Instructions are in the thread back to stock.
Secondly, I'm on MetroPCS and flashed the retus2 firmware (BestBuy versions) no MetroPCS bloatware. Flash the retus2 and you'll be fine.

edwardxi said:
thanks, I found one on eBay for $38... too expensive, used to around $10
Click to expand...
Click to collapse
You probably won't find one cheaper. $10 ones are ones that give you a code to unlock. Unlocking a MetroPCS/TMO G7Power with the Server unlock app requires a person to remotely connect to your phone and edit your NV files. Currently they are changing the imei to a different model phone that they can generate the unlock codes for. Since they are using a different model phone imei, activating on Sprint Network could be an issue since Sprint is picky as to what phones they put on their network.

If I flash "retail" firmware on a TMO Sim locked Moto G7 power will it ask me for an unlock code that I don't have? Bought it on eBay and TMO says its eligible to unlock but refuses because I'm not the original owner. Bootloader is unlocked.

EDIT: Figured out my issue. Was my fault. Flashed the RETAILUS firmware on my MetroPCS model.
Thanks OP!
Also to add to this, the Metro model is NOT supposed to be compitable with Verizon due to lack of CDMA.... Well Magically the phone now supports CDMA so it has a CDMA radio in it!