hi 2 all
ASUS TF300TG stick in asus logo after rooting and not detect USB Cable for data by computer and just charge is ok.
no fastboot no recovery...no Power+VolDown...plz help to solve this
pc_helper said:
hi 2 all
ASUS TF300TG stick in asus logo after rooting and not detect USB Cable for data by computer and just charge is ok.
no fastboot no recovery...no Power+VolDown...plz help to solve this
Click to expand...
Click to collapse
It will be good to tell more about your root.
How do you root ?
Which guide have you use ?
Which version of your TG ? before the root?
etc, more infos will be good for a good help
ASUS tf300t fix root permissions error
this was the best place i could think to post this.
I can see that you are somewhat versed with my series of tablet so im hoping maybe you can help me.
I previously had rooted my device and did so pretty easily (fastboot flash CWM-Touch, root-signed.zip) yadda yadda.
Then I deciced i wanted to install CM 9.1(stable)[or so it said]
Downloaded the build onto sd card, wiped my caches and data and all that...CWM install .zip,(good), reboot, stuck at inital cold-boot screen with ASUS and TEGRA powered by NVIDIA logos.
Found a solution to that problem @ transformerforums.com- did a fastboot: flash system blob w/original JB OTA build (took forever, i even thought it froze my computer) i had to download from the asus support site and got the tablet up and running again....BUT, and this is the kicker, no root. I tried using CWM-touch to reinstall root-signed.zip, successful. Hit reboot and CWM popped up with your user su binary may be damaged. Repair? yes. Reboots fine, but then i tried to access a program that needed root, ERROR! IS DEVICE ROOTED? pops up... I checked my /system/xbin/su. still there but couldnt do anything with it...
ANY SUGGESTIONS TO HELP WOULD BE AWESOME. This isn't the first device ive cracked so im not exactly new but dont know enough about this to try fix anymore than what ive done and ive searched the forums over for the past four days and cant find anyone or anything that is similar to whatim experiencing...
please help.
Sincerely, SIK
P.S.-DONT USE CWM-TOUCH V6.0.3 ON THIS TABLET. YOU CANT MAKE RECOVERIES!!! IT SAYS IT DOES BUT DOESNT BUILD ANYTHING!
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
TF300TG
philos64 said:
It will be good to tell more about your root.
How do you root ?
Which guide have you use ?
Which version of your TG ? before the root?
etc, more infos will be good for a good help
Click to expand...
Click to collapse
i dont know about root version,just i know that user attempt to root this device but not success,i am good about installing Official rom or custom rom on asus tf300tg but just problem is USB for data mode not define by cumputer & not working for fastboot & just work for charging,plz help
Dear transformers,
My Transformer TF300T is a brick !!
I've got TF300T, with stock JB 4.1.1.
I'm not sure if it permanent, please help !!
I've unlocked my device via the official Asus unlock device tool.
It went well.
After few days, I've downloaded few programs from the "Google Play".
One of the programs, allowed to automatically enter recovery after reboot.
I opened the program (of course I don't remember it name), click on "enter recovery after reboot", and then the problem started !
Please see attached screenshot.
The device is stuck on the Asus logo, without any progress.
When I'm trying to enter the recovery menu, with "Power + Volume Down", the device turning of for 3 seconds, and getting back to the exact same position.
I cannot choose "RCK", no Android, no USB option, nothing !!
What you see in the screenshot, is the permanent condition...
When the Transformer worked, my computer recognize it, but now when it stuck on the Asus logo, it seems that the computer even doesn't see the device !! (although the driver is installed...)
How bad is it ??
It is a hard brick ??
Can I do anything without RMA it to Asus ??
I'm pretty sure that Asus won't support the device, because I've unlocked it
Please help !!
If XDA couldn't help me, I'm really lost... :/
Thanks a lot !
Transformist.
Are u sure to use the right tips to enter< rck>< fastboot>
Vol down and power
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Absolutely, more than that, it worked in the past...
I can only get the APX mode...
What should I do from there ??
How can I recover the brick from APX ?
Thanks,
Transformist.
okrasitna said:
Are u sure to use the right tips to enter< rck>< fastboot>
Vol down and power
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
so you have NVFlash that you can enter APX Mode?
then you could just restore a backup like here - but I'm really confused an APP should have broken your rck/fastboot menu
-angel* said:
so you have NVFlash that you can enter APX Mode?
then you could just restore a backup like here - but I'm really confused an APP should have broken your rck/fastboot menu
Click to expand...
Click to collapse
Thanks for your answer !!
It seems like the only thing that respond, is NVFlash...
But I still don't know what exactly to do with it...
The link you've sent me is for TF700...
This is the output of it (screenshot attached).
I absolutely agree with you that apps from the Goggle Play shouldn't prevent me to enter RCK / fastboot, but the RCK / fastboot worked until I've installed and used it... that all I know about why it's happened.
Is there a step-by-step solution for how to work with NVFlash (or wheelie) with TF300T ??
Thanks again !!
Transformist1.
transformist1 said:
Thanks for your answer !!
It seems like the only thing that respond, is NVFlash...
But I still don't know what exactly to do with it...
The link you've sent me is for TF700...
This is the output of it (screenshot attached).
I absolutely agree with you that apps from the Goggle Play shouldn't prevent me to enter RCK / fastboot, but the RCK / fastboot worked until I've installed and used it... that all I know about why it's happened.
Is there a step-by-step solution for how to work with NVFlash (or wheelie) with TF300T ??
Thanks again !!
Transformist1.
Click to expand...
Click to collapse
I've made a small progess (??)
I got an error message from our friend "wheelie"
(Of course from APX mode...)
Does somebody knows what it should means ??
Thanks,
Transformist.
Unless you already generated your device-specific NVFlash files while still on ICS, you will not be able to use NVFlash/Wheelie at this point. Wheelie needs those files to run and they will only work on the device they were generated on. The NVFlash files cannot be generated after upgrading to JB as of now.
Does your computer recognize it as an ADB device?
jimpmc said:
Unless you already generated your device-specific NVFlash files while still on ICS, you will not be able to use NVFlash/Wheelie at this point. Wheelie needs those files to run and they will only work on the device they were generated on. The NVFlash files cannot be generated after upgrading to JB as of now.
Does your computer recognize it as an ADB device?
Click to expand...
Click to collapse
Thanks for your answer !!
Unfortunately I cannot get to a situation that my device is recognize as ADB in my computer (that is because I cannot get into RCK / fastboot mode)...
As far as I succeeded, I can only get to APX...
BTW, I've tryied to use a lot of times with the "hard reset" button, with no success...
So... if I cannot use NVFlash/Wheelie, and I don't have any backup for my device, what can I do now ??
You want to tell me that I can throw my device, if I don't have a backup and only can get to APX ??
Thanks again,
Transformist1.
transformist1 said:
Thanks for your answer !!
Unfortunately I cannot get to a situation that my device is recognize as ADB in my computer (that is because I cannot get into RCK / fastboot mode)...
As far as I succeeded, I can only get to APX...
BTW, I've tryied to use a lot of times with the "hard reset" button, with no success...
So... if I cannot use NVFlash/Wheelie, and I don't have any backup for my device, what can I do now ??
You want to tell me that I can throw my device, if I don't have a backup and only can get to APX ??
Thanks again,
Transformist1.
Click to expand...
Click to collapse
Dear Transformers,
I hope it's allowed to share external links (and if not - I'm really sorry...):
I saw a guide to work with a program called "easyflasher", to unbrick if you have only APX mode...
http://new-ones.blogspot.co.il/2012/11/asus-transformer-tf101-only-in-apx-mode.html
Does anyone knows if there is a similar solution to TF300T ??
Thanks,
Transformist1.
transformist1 said:
Thanks for your answer !!
Unfortunately I cannot get to a situation that my device is recognize as ADB in my computer (that is because I cannot get into RCK / fastboot mode)...
As far as I succeeded, I can only get to APX...
BTW, I've tryied to use a lot of times with the "hard reset" button, with no success...
So... if I cannot use NVFlash/Wheelie, and I don't have any backup for my device, what can I do now ??
You want to tell me that I can throw my device, if I don't have a backup and only can get to APX ??
Thanks again,
Transformist1.
Click to expand...
Click to collapse
hm so if you don't have the ICS backup'ed device-specific files NVFlash can't help you - only thing I found was this with unblob'd system updates - what would make sense would be if you could do the same with unblob'd TF300 blob's - other thing which I would recommend to try first is THIS as it sounds like the same problem and ppl seem to agree (although OP didn't answer anymore) - hope I can help you a bit although I'm not familiar with NVFlash
-angel* said:
hm so if you don't have the ICS backup'ed device-specific files NVFlash can't help you - only thing I found was this with unblob'd system updates - what would make sense would be if you could do the same with unblob'd TF300 blob's - other thing which I would recommend to try first is THIS as it sounds like the same problem and ppl seem to agree (although OP didn't answer anymore) - hope I can help you a bit although I'm not familiar with NVFlash
Click to expand...
Click to collapse
Hi everyone,
After 4 long weeks I officially announcing my TF300T is dead...
After hundreds of posts, I understand that with only APX mode (no RCK, no fastboot0), there is nothing that can be done.
Thanks for all of you for your support, I'll now contact ASUS for RMA.
Thanks again,
Transformist1.
transformist1 said:
Hi everyone,
After 4 long weeks I officially announcing my TF300T is dead...
After hundreds of posts, I understand that with only APX mode (no RCK, no fastboot0), there is nothing that can be done.
Thanks for all of you for your support, I'll now contact ASUS for RMA.
Thanks again,
Transformist1.
Click to expand...
Click to collapse
hello, what said asus and how much cost asus Reinstalling
RMA
Repair of bricked ASUS TF300T in Czech Republic - 500,- KC ... cca 20 Euro ... :laugh:
Hi..
A phone shop bricked my phone. Now it is not powered on if the battery inside. It also not power on without battery, but atleast when i connect it to USB http://telewizor.eu/displaylink.html , the red light at the phone (near camera) turn on. The pc also not detecting the phone.
Is there any way to fix it or flash it since it is not detected?
TQ
Will someone help?
kuszmania9999 said:
Will someone help?
Click to expand...
Click to collapse
maybe you have flashed wrong ROM. be careful not to confuse with ROW or CN rom. try press VOLUME UP + VOLUME DOWN and connect usb cable to your PC. works with mine.
sahniana said:
maybe you have flashed wrong ROM. be careful not to confuse with ROW or CN rom. try press VOLUME UP + VOLUME DOWN and connect usb cable to your PC. works with mine.
Click to expand...
Click to collapse
Wow....finally a reply, nevermind, i already managed to solved it by myself.
Hello,
I also having this issue and just fixed it.
See thread here :
http://forum.xda-developers.com/lenovo-a850/help/lenovo-a850-wont-power-flashing-rom-t3322646
Good Luck!
Hi.
The one way of course is direct connect between device and notebook with usb cable.
Is there a point to try without battery?
Some keys from the device as final hope ?
In this case it`s about Jy-s3
Thanks in advance
diretouch said:
Hi.
The one way of course is direct connect between device and notebook with usb cable.
Is there a point to try without battery?
Some keys from the device as final hope ?
In this case it`s about Jy-s3
Thanks in advance
Click to expand...
Click to collapse
What do you mean by non working device? And no, it won't recognise the device without battery.
Hi...
I have problem with these tablet. I suddenly wrong installing blob from TWRP devices last night. After i twrp reboot, BOOM.. My tablet bricked, i pressing VOL- and power button to get into fastboot, but my tablet not responding. I browse on net, my tablet has not have fastboot, and bootloader anymore. I try pressing VOL+ power button, APX driver install automatically after i connected to pc. I search many webs include xda, some users had that problem. So, i can't found the best tutorial to fix.
I use windows 7 for my pc. Is there any tools or tutorial to solve my problem. Cause, many data's in my tablet that im not backup yet..
Thank you..
help
help
hmm.. no one can't help me to solve this...
Hello roomraditz, right now this issue doesn't have any easy solution if you are entering on the APX mode means that the firmware has been corrupted anyhow and in order to install anything in this mode you would need to recover some keys that are not available at this moment.
I have been working on find these keys but I didn't have any result yet.
https://forum.xda-developers.com/sh...porting-tegra-x1-exploit-to-tegra-k1-t3960111