Related
i have a problem with my computer uter:is not read my tablet.
i have winXP, slow computer but theres ways to make some level in kind of another way
i try to root with this guide http://forum.xda-developers.com/showthread.php?t=2026632&highlight=root+in+one+click+jb
i stucked in the half of level 4, in the fastboot- ... the first one, is not read my device so i cant go on
thanks for helpers
need realy soon
aviv903 said:
i have a problem with my computer uter:is not read my tablet.
i have winXP, slow computer but theres ways to make some level in kind of another way
i try to root with this guide http://forum.xda-developers.com/showthread.php?t=2026632&highlight=root+in+one+click+jb
i stucked in the half of level 4, in the fastboot- ... the first one, is not read my device so i cant go on
thanks for helpers
need realy soon
Click to expand...
Click to collapse
Install the drivers from the PDA net program. Worked for me
cmendonc2 said:
Install the drivers from the PDA net program. Worked for me
Click to expand...
Click to collapse
can you give me a ULR
http://junefabrics.com/android/index.php
cmendonc2 said:
http://junefabrics.com/android/index.php
Click to expand...
Click to collapse
its not work:crying:
any others ideas???
aviv903 said:
its not work:crying:
any others ideas???
Click to expand...
Click to collapse
What does your tablet show up as under Devices in Windows? Is is a fastboot device? try changing the USB mode to MTP or PTP (in your device settings)
cmendonc2 said:
What does your tablet show up as under Devices in Windows? Is is a fastboot device? try changing the USB mode to MTP or PTP (in your device settings)
Click to expand...
Click to collapse
my computer not read it at all,
i want to buy a new computer, the computer is old but any good way to do it before
My phone died and requires me to flash boot.img in order to bring it back to Android. To my surprise, I couldn't get it to go, and after some testing it seems my USB port is having an issue where it won't connect data, but will charge. Both of my computers with seperate USB cords are stating that the USB device has malfunctioned. Does anyone know of a good solution? I know there are the pogo pins on the back, but I don't know if there is anything that connects to them or if they transfer data. Is my only option at this point looking for someone to do a USB port repair for me? Any ideas would be very welcomed. Thanks!
Not sure exactly what your problem is? Boot.bin? What exactly is that?
RollTribe said:
Not sure exactly what your problem is? Boot.bin? What exactly is that?
Click to expand...
Click to collapse
Probably boot.img
Sent from my HTC One XL using xda premium
serotoninzero said:
My phone died and requires me to flash boot.img in order to bring it back to Android.
Click to expand...
Click to collapse
Where is it now if not Android? There are only certain instances that the computer will recognize it. Try a different computer as well (fresh install of HTC drivers).
chris948 said:
Where is it now if not Android? There are only certain instances that the computer will recognize it. Try a different computer as well (fresh install of HTC drivers).
Click to expand...
Click to collapse
Sitting at the bootloader as well as TeamWin recovery usb mount. Both times comes up as USB device not recognized.
serotoninzero said:
Sitting at the bootloader as well as TeamWin recovery usb mount. Both times comes up as USB device not recognized.
Click to expand...
Click to collapse
You are trying to go into fastboot, right, and not just regular bootloader.
Hi all, I have installed in i9003 via Odin DDLF2, when downloading Odin reported an error, I guess I made a mistake because I disconnected the phone from the cable and remove the battery. I wanted to give back to download mode and try again, however the phone does not respond when you connect the USB nothing, not charging. I was looking at the XDA forum board and I tried everything. only thing that works is when I start Odin, connect the phone via USB without battery and battery, and Windows will list window, the last connected USB device is not recognized, you know tell me what should I do?
Thank you and sorry for my bad English google translate.
alndy72a said:
Hi all, I have installed in i9003 via Odin DDLF2, when downloading Odin reported an error, I guess I made a mistake because I disconnected the phone from the cable and remove the battery. I wanted to give back to download mode and try again, however the phone does not respond when you connect the USB nothing, not charging. I was looking at the XDA forum board and I tried everything. only thing that works is when I start Odin, connect the phone via USB without battery and battery, and Windows will list window, the last connected USB device is not recognized, you know tell me what should I do?
Thank you and sorry for my bad English google translate.
Click to expand...
Click to collapse
One last chance is to use the USB JIG.
You can make it by yourself or buy it. Here is the infomation.
http://forum.xda-developers.com/showthread.php?t=1869494
hope this help. :fingers-crossed:
kaotomut said:
One last chance is to use the USB JIG.
You can make it by yourself or buy it. Here is the infomation.
http://forum.xda-developers.com/showthread.php?t=1869494
hope this help. :fingers-crossed:
Click to expand...
Click to collapse
I build the instructions and nothing, maybe I did wrong, I ordered one through iShop on Monday it had come to me, so I hope this helps, I'll let you know. only I am afraid that it was not worse.:crying:
alndy72a said:
I build the instructions and nothing, maybe I did wrong, I ordered one through iShop on Monday it had come to me, so I hope this helps, I'll let you know. only I am afraid that it was not worse.:crying:
Click to expand...
Click to collapse
Yes,a lot of effort required ,to make our own one because of the USB. It's not the same position pin as the guide. Better buy the right one would be. :good:
kaotomut said:
Yes,a lot of effort required ,to make our own one because of the USB. It's not the same position pin as the guide. Better buy the right one would be. :good:
Click to expand...
Click to collapse
I just hope it helps. Thank you.
alndy72a said:
I just hope it helps. Thank you.
Click to expand...
Click to collapse
so I bought a USB Jig, did not help, I took the phone to a service, they told me that there is pocketed board. I guess I will have to say goodbye to my Galaxy SL, thank you for your advice. :crying:
Hey there, guys and gals,
I'm having a bit of an issue here, and it's somewhat serious.
The issue is as follows. I have Android 5.0.1 on my Nexus 5. When I connect my computer to my laptop... nothing.
Nothing at all. It doesn't show up in device manager, not even as unknown. Fastboot doesn't detect it, nor does ADB. I can't do anything, and it's scaring me. I don't know how I could have broken it, but I need to know how to fix it.
I'm happy to do whatever to get it working, so please help...
Update: Tried to factory reset, to see if it would fix the issue. It's stuck "Erasing...", and won't go further. I'm afraid my phone may be hard-bricked... Is it possible to reflash these using JTAG, and if so is there anyone that can assist with that process?
CypherX1389 said:
Hey there, guys and gals,
I'm having a bit of an issue here, and it's somewhat serious.
The issue is as follows. I have Android 5.0.1 on my Nexus 5. When I connect my computer to my laptop... nothing.
Nothing at all. It doesn't show up in device manager, not even as unknown. Fastboot doesn't detect it, nor does ADB. I can't do anything, and it's scaring me. I don't know how I could have broken it, but I need to know how to fix it.
I'm happy to do whatever to get it working, so please help...
Update: Tried to factory reset, to see if it would fix the issue. It's stuck "Erasing...", and won't go further. I'm afraid my phone may be hard-bricked... Is it possible to reflash these using JTAG, and if so is there anyone that can assist with that process?
Click to expand...
Click to collapse
Is it stock or what? are you rooted?
Also , keep in mind that the factory reset can take up to 30 minutes.
IMO it sounds like a busted cable/usb port on either side / incorrect drivers.
Edit : JTAG is not possible on our devices , access is locked from the chipset itself.
Are u on Windows 8.1 if so I had a problem with Windows thinking that my phone was a acer and I had to go the driver settings and manually tell it that it was a ADB USB connection then it would connect fine also could be USB cable I found the nexus 5 to be very picky about cables
Sometimes I get that but it solves by going into dev and checking and unchecking usb debugg, but sounds more like a busted usb plug
Have you considered that you may be using incorrect drivers on your PC? This issue can be caused by having improperly installed drivers.
dkconor said:
Have you considered that you may be using incorrect drivers on your PC? This issue can be caused by having improperly installed drivers.
Click to expand...
Click to collapse
Alxhn said:
Sometimes I get that but it solves by going into dev and checking and unchecking usb debugg, but sounds more like a busted usb plug
Click to expand...
Click to collapse
xstokerx said:
Are u on Windows 8.1 if so I had a problem with Windows thinking that my phone was a acer and I had to go the driver settings and manually tell it that it was a ADB USB connection then it would connect fine also could be USB cable I found the nexus 5 to be very picky about cables
Click to expand...
Click to collapse
Niflheimer said:
Also , keep in mind that the factory reset can take up to 30 minutes.
IMO it sounds like a busted cable/usb port on either side / incorrect drivers.
Edit : JTAG is not possible on our devices , access is locked from the chipset itself.
Click to expand...
Click to collapse
AndreIrawan97 said:
Is it stock or what? are you rooted?
Click to expand...
Click to collapse
Right. I'll address you all at once for ease.
Firstly, the USB connector functions fine. My USB-OTG cable still allows me to access files on a flash drive.
Secondly, drivers can't be an issue in this case. It won't even enumerate the device in device manager. As if the phone simply isn't plugged in.
Thirdly, Win8 isn't the issue, as I"ve had this phone connected to this computer many, /many/ times.
So it must be a problem within Android 5.0.1
But here's the problem. In order to install anything else, I'd have to install a recovery. In order to that, I need root. In order to root, I need USB. I'm lost, guys...
I just had an idea does towel root work on 5.0 if so u could try that?
xstokerx said:
I just had an idea does towel root work on 5.0 if so u could try that?
Click to expand...
Click to collapse
Hmm... That might work. I'll take a look. But if it succeeds, then something gets broken later in the process, this thing is a paperweight, right?
Edit: According to http://forums.androidcentral.com/an...29-rooting-nexus-5-towelroot.html#post4125236 Towelroot will never be possible on Lollipop. I didn't go much further than that though...
Ya I just read that to bummer
Edit: as of now there is no way to root without pc sounds like u may have some sort of hardware failure I'm guessing only way to fix is to send it in and that's 150 bucks min
xstokerx said:
Ya I just read that to bummer
Edit: as of now there is no way to root without pc sounds like u may have some sort of hardware failure I'm guessing only way to fix is to send it in and that's 150 bucks min
Click to expand...
Click to collapse
Well... This happened when I updated via OTA (after reinstalling the stock recovery) to 5.0.1 after 5.0. I did this all over USB. Immediately thereafter, it quit. I got it to boot, btw. The erasing problem fixed itself, and it's now running, but the USB is still stuffed. This is sounding more like software than hardware. Almost as if whatever chip talks via USB lost it's own firmware somehow.
Cable or driver 95% sure. Did you try connecting it to a windows 7 /linux pc ? And ... u can never be sure but try connecting to a usb2.0 port. I had those issues when I accidentally plugged my cable in my frontal panel ( usb3.0)
A few months ago I had the same problem, my phone got not recognized by adb or fastboot. I played around a whole day with drivers and stuff like that. At the end I found a post on the internet describing that not all USB cables are able to do adb connections and I should try the original USB cable that came with my Nexus 5. So I looked for that particular cable and hey presto it worked right away.
And 2$ usb cables do break over time. They might still charge , but one cold solder joint and no connection
CypherX1389 said:
Secondly, drivers can't be an issue in this case. It won't even enumerate the device in device manager. As if the phone simply isn't plugged in.
Click to expand...
Click to collapse
So you are correct. I didn't see that in your post, my bad.
Have you tried with another cable maybe?
Make sure you have either MTP or PTP checked in Settings/Storage/USB computer connection.
Niflheimer said:
Cable or driver 95% sure. Did you try connecting it to a windows 7 /linux pc ? And ... u can never be sure but try connecting to a usb2.0 port. I had those issues when I accidentally plugged my cable in my frontal panel ( usb3.0)
Click to expand...
Click to collapse
Georg2808 said:
A few months ago I had the same problem, my phone got not recognized by adb or fastboot. I played around a whole day with drivers and stuff like that. At the end I found a post on the internet describing that not all USB cables are able to do adb connections and I should try the original USB cable that came with my Nexus 5. So I looked for that particular cable and hey presto it worked right away.
Click to expand...
Click to collapse
Telyx said:
Make sure you have either MTP or PTP checked in Settings/Storage/USB computer connection.
Click to expand...
Click to collapse
Alxhn said:
Have you tried with another cable maybe?
Click to expand...
Click to collapse
Niflheimer said:
And 2$ usb cables do break over time. They might still charge , but one cold solder joint and no connection
Click to expand...
Click to collapse
I've tried multiple cables. I KNOW that this cable is fine for ADB, because it works fine for my other devices. All of them. I may be marked a newbie on the forums, but I'm really not one. When I first signed up for this account I was, but that was in what... '07?
I've tried:
Drivers (Obviously won't work.)
Cables
Rebooting
Factory Reset
Different Computers
Linux
Windows
Switching USB connection modes
Toggling Dev Mode/Debugging on/off
Nothing works. It HAS to be a software issue on the phone. I don't think anyone read it, but it's almost as if the IC that handles USB connections has lost it's firmware. I don't think that can happen, honestly, so it must be whatever's in the ROM that TALKS to that IC that's causing the issue. Problem is, I don't know how to fix the ROM without USB connection and Fastboot.
CypherX1389 said:
Nothing works. It HAS to be a software issue on the phone. I don't think anyone read it, but it's almost as if the IC that handles USB connections has lost it's firmware. I don't think that can happen, honestly, so it must be whatever's in the ROM that TALKS to that IC that's causing the issue. Problem is, I don't know how to fix the ROM without USB connection and Fastboot.
Click to expand...
Click to collapse
Its unlikely that the ROM will be the cause if the USB port suddenly stops working.
Do you have a custom recovery?
If not, then not much you can do except send it in for repair/replacement.
Hi, i have an huawei and i cant connect my phone to my computer via usb the phone charges but no connectivity i changed the cables the computer and nothing i went to settings and selected usb connection but nothing.
Please help me i really need
omidmehr69 said:
Hi, i have an huawei and i cant connect my phone to my computer via usb the phone charges but no connectivity i changed the cables the computer and nothing i went to settings and selected usb connection but nothing.
Please help me i really need
Click to expand...
Click to collapse
You'll need to install huawei drivers for your pc. I can help you find one tomorrow when I'll be by a pc.
So I'm waiting
omidmehr69 said:
So I'm waiting
Click to expand...
Click to collapse
What's your Device model?
Newyork! said:
What's your Device model?
Click to expand...
Click to collapse
huawei p7
omidmehr69 said:
huawei p7
Click to expand...
Click to collapse
This should help you.
PS: you gotta thank God that Iran didn't block XDA :laugh: lol