Related
When i tried to root my HTC One S, it got bricked. At first, i could enter the bootloader menu. But now its refusing to power on. After holding down the power and volume down for 10 seconds, the screen just flickers. Anyone familiar with the problem?
hansonb23 said:
When i tried to root my HTC One S, it got bricked. At first, i could enter the bootloader menu. But now its refusing to power on. After holding down the power and volume down for 10 seconds, the screen just flickers. Anyone familiar with the problem?
Click to expand...
Click to collapse
try to charge your phone for 2 hours ! then try booting into bootloader again !
how are you rooting ?
did you unlock your bootloader at HTC Dev ?
Hiken_Ace said:
try to charge your phone for 2 hours ! then try booting into bootloader again !
how are you rooting ?
did you unlock your bootloader at HTC Dev ?
Click to expand...
Click to collapse
Yes, i unlocked my bootloader at HTC dev. It was entering the bootloader menu at first. But now, there is no response from the phone. I even tried charging it overnight
hansonb23 said:
Yes, i unlocked my bootloader at HTC dev. It was entering the bootloader menu at first. But now, there is no response from the phone. I even tried charging it overnight
Click to expand...
Click to collapse
i got same problem,,
in my case, if i connect my device to PC (win 8) orange led charger is on, and i check on device manager (other device) :
- QHSUSB_DLOAD
when i hold power button i cant find notification on device manager but "nothing happened"
Than if i release power button i got notif again :
- Qualcomm CDMA Tecnologies MSM
- USB DEVICE
than about 5 second back to :
- QHSUSB_DLOAD
again and again,, i have tired try to enter Fastboot with combine power button and volume (-) but i got nothing
please help before i buy a new device
Patience guys ... Help is coming soon !
Sent from my HTC One S using xda app-developers app
galih_dian said:
i got same problem,,
in my case, if i connect my device to PC (win 8) orange led charger is on, and i check on device manager (other device) :
- QHSUSB_DLOAD
when i hold power button i cant find notification on device manager but "nothing happened"
Than if i release power button i got notif again :
- Qualcomm CDMA Tecnologies MSM
- USB DEVICE
than about 5 second back to :
- QHSUSB_DLOAD
again and again,, i have tired try to enter Fastboot with combine power button and volume (-) but i got nothing
please help before i buy a new device
Click to expand...
Click to collapse
ur phone seems to be bricked contact @Tecardo he will be able to help u fixing it via jtag
galih_dian said:
i got same problem,,
in my case, if i connect my device to PC (win 8) orange led charger is on, and i check on device manager (other device) :
- QHSUSB_DLOAD
when i hold power button i cant find notification on device manager but "nothing happened"
Than if i release power button i got notif again :
- Qualcomm CDMA Tecnologies MSM
- USB DEVICE
than about 5 second back to :
- QHSUSB_DLOAD
again and again,, i have tired try to enter Fastboot with combine power button and volume (-) but i got nothing
please help before i buy a new device
Click to expand...
Click to collapse
If your feeling confident you could try this but it is risky. I would advise you to ask @Tecardo
dd98 said:
If your feeling confident you could try this but it is risky. I would advise you to ask @Tecardo
Click to expand...
Click to collapse
Has anyone had any experience with the authorised HTC service centers? I mean.. do they accept the phone if its not powering on.? and wil they fix it once they know i tried to root it?
hansonb23 said:
Has anyone had any experience with the authorised HTC service centers? I mean.. do they accept the phone if its not powering on.? and wil they fix it once they know i tried to root it?
Click to expand...
Click to collapse
did you unlock your bootloader
bilal_liberty said:
ur phone seems to be bricked contact @Tecardo he will be able to help u fixing it via jtag
Click to expand...
Click to collapse
dd98 said:
If your feeling confident you could try this but it is risky. I would advise you to ask @Tecardo
Click to expand...
Click to collapse
yes,, ithink i need JTAG for help my phone,,
my phone is S3
thanks for answer :good:
galih_dian said:
yes,, ithink i need JTAG for help my phone,,
my phone is S3
thanks for answer :good:
Click to expand...
Click to collapse
yeah jtag is your best option as i dont know much about ville c2
hansonb23 said:
Has anyone had any experience with the authorised HTC service centers? I mean.. do they accept the phone if its not powering on.? and wil they fix it once they know i tried to root it?
Click to expand...
Click to collapse
HAHA, FUNNY STORY. I told HTC about whatever you said (i have the same thing that happened) and they told me to change the mainboard which costs more than a second hand One S :thumbup:
CM11 Powered G-Wonder
On my L, accidently flashed xperia U's firmware, then rebooted and died :crying::crying::crying: what can I do? when trying to attach device in fastboot, flashboot mode, nothing happens. Please, please help me guys.
thanks
not solutions ? :crying::crying:
Steve Mc. Gregory said:
not solutions ? :crying::crying:
Click to expand...
Click to collapse
Try flash stock fw back..pull out battery with push power button about 3-5 sec then connect to flash..
If its failed then i guess goodbye to your device..
I'll Try. thanks for support
I too have same problem kindly give me some solution
Your device is dead.
grewal720 said:
I too have same problem kindly give me some solution
Click to expand...
Click to collapse
See possible solution stated above.
aleksander002 said:
Your device is dead.
Click to expand...
Click to collapse
Technically, a non organic thing can't die.
Send from da hood
i have tried but my phone doesn't get into flash mode or fastboot mode.
grewal720 said:
i have tried but my phone doesn't get into flash mode or fastboot mode.
Click to expand...
Click to collapse
Then it's dead, and the only thing you can do about it is send it to a service center.
Isn't there a way for xperia l to recover from hard brick like xperia z1 via test point or something bcz sending for repair will be very expensive and it would be better of buying a new phone.
Is it possible that device becomes totally unrecoverable(hard bricked) when i attempted to change partitions and went wrong.
bassil.alzoubi said:
hi
1-make sure you battery is charged
2-pull out battery for 10 minutes
3-connect your phone in flash mode (hold vol down button then connect usb cable
not work ?
try another usb cable another usb port
i dont think the phone will totally dead by flashing a wrong firmware but i think its a battery issue
Click to expand...
Click to collapse
Thanks for reply. it was port issue. data wasnt working
Guys
I had hard bricked X10. So use JTAG/REFF connection and rebuild your device. It's so hard, but I made it good luck
Hm ..
bassil.alzoubi said:
i told you try another usb port
and dont say thanks ....press it :good:
Click to expand...
Click to collapse
already pressed man thanks for useful reply :good:
Hello Everyone
I posted here some pics of entering flashmode and fastboot mode whithout volume keys on motherboard.
Testpoint must be conected before usb cable!!
I know someone can explore this and help recovering xperia from soft brick or hard brick. sorry for my bad english
Best regards
Has anyone tested this so far???
Only a developer or mobile technician will do this on a phone. Ordinary user won't because they are scared. That's good find and I'm sure someone will make his day better
DavidMKD said:
Only a developer or mobile technician will do this on a phone. Ordinary user won't because they are scared. That's good find and I'm sure someone will make his day better
Click to expand...
Click to collapse
I have tested this on two motherboards and it working:good::good:
what do I do?
Only a developer or mobile technician will do this on a phone. Ordinary user won't because they are scared. That's good find and I'm sure someone will make his day better
Click to expand...
Click to collapse
when I plug the card into the PC's USB and it automatically enters mtp mode there I am prevented from doing the above procedure, some light at the end of the tunnel?
noob hacker said:
Hello Everyone
I posted here some pics of entering flashmode and fastboot mode whithout volume keys on motherboard.
Testpoint must be conected before usb cable!!
I know someone can explore this and help recovering xperia from soft brick or hard brick. sorry for my bad english
Best regards
Click to expand...
Click to collapse
hi why do you have to do it like this ? u cannot use buttons?
no,because on one motherboard pcb conectors of volume and power button are broken and on the second motherboard no chance to enter flashmode or fastboot mode with volume buttons.I tryed all possible ways and no luck but I found the way described in my first post on photos ☺
noob hacker said:
no,because on one motherboard pcb conectors of volume and power button are broken and on the second motherboard no chance to enter flashmode or fastboot mode with volume buttons.I tryed all possible ways and no luck but I found the way described in my first post on photos ☺
Click to expand...
Click to collapse
yes it is there is little hole next to sim card u need to press it with sim card remover pin .. I just did it and pressed vol. down and connected usb and flashed 5.1.1 all works flawlessly but lollipop SUCKS ! how to revert back to KK ?
Download 4.4.4 kitkat and flash it ,good luck
I will upload more pics for better understandig....
THIS WAY IS ONLY WHO CAN NOT ENTER FLASHMODE WITH VOLUME KEYS
noob hacker said:
I will upload more pics for better understandig....
THIS WAY IS ONLY WHO CAN NOT ENTER FLASHMODE WITH VOLUME KEYS
Click to expand...
Click to collapse
i flashed 4.4.4 ut stucked on animation waves.. reflashed 5.1.1 back and cannot be arsed messing with it again... it isn't mine anyway..
reflash again,wipe all,CLEAN INSTALL IS UNDER MUST!!!!
noob hacker said:
reflash again,wipe all,CLEAN INSTALL IS UNDER MUST!!!!
Click to expand...
Click to collapse
no it isnt..
what for ? phone works ..
If it works ok....working phone is better than dead phone
noob hacker said:
If it works ok....working phone is better than dead phone
Click to expand...
Click to collapse
exactly not gonna mess with it anymore.. soon it will be in customer's hands..
Hello, i have an Alcatel Idol 3 5,5 (6045) and i decided to root it, so installed all that i needed (drivers, adb ..). But the problem is that i need to unlock the OEM thing, so i need to flash my smartphone to its original stock ROM, so i downloaded the Panasonic Eluga Switch one (which is a rebranded idol 3) and launched it, but the problem it seem that my device CAN'T load in download mode, i tried anything :
Uninstalling/Reinstalling all drivers
Executing the software as administrator
Executing the software with Windows XP compatibility mode
The volume + and - and USB method
The ADB method, it worked for anything else (rebooting in fastboot and recovery mode) but it won't work for the download one, it just reboot normally, i don't know why all is exactly correct, i tested with MTP and PTP usb modes, and in two differents windows, and nothing worked at all.
Please, is someone have the solution to boot my stupid idol 3 on download mode i would be grateful to him. Cordially.
Issou said:
Hello, i have an Alcatel Idol 3 5,5 (6045) and i decided to root it, so installed all that i needed (drivers, adb ..). But the problem is that i need to unlock the OEM thing, so i need to flash my smartphone to its original stock ROM, so i downloaded the Panasonic Eluga Switch one (which is a rebranded idol 3) and launched it, but the problem it seem that my device CAN'T load in download mode, i tried anything :
Uninstalling/Reinstalling all drivers
Executing the software as administrator
Executing the software with Windows XP compatibility mode
The volume + and - and USB method
The ADB method, it worked for anything else (rebooting in fastboot and recovery mode) but it won't work for the download one, it just reboot normally, i don't know why all is exactly correct, i tested with MTP and PTP usb modes, and in two differents windows, and nothing worked at all.
Please, is someone have the solution to boot my stupid idol 3 on download mode i would be grateful to him. Cordially.
Click to expand...
Click to collapse
You don't Know how to go to Download Mode...
Just Turn off the device ..Press Volume UP AND DOWN AND POWER BUTTON AND THEN JUST CONNECT with usb and you will get RED SCREEN just press VOLUME UP until You will get Black Screen
Alek Dev said:
You don't Know how to go to Download Mode...
Just Turn off the device ..Press Volume UP AND DOWN AND POWER BUTTON AND THEN JUST CONNECT with usb and you will get RED SCREEN just press VOLUME UP until You will get Black Screen
Click to expand...
Click to collapse
Hi, i forgot it but its not actually my smartphone, but my friend one. And i use teamviewer to help with stuff, we did the USB method many time and he told me that it didn't work, no matter what he does
Issou said:
Hi, i forgot it but its not actually my smartphone, but my friend one. And i use teamviewer to help with stuff, we did the USB method many time and he told me that it didn't work, no matter what he does
Click to expand...
Click to collapse
First he need to go to download mode to work Panasonic Firmware...
Sent from my Idol 3 using Tapatalk
Alek Dev said:
First he need to go to download mode to work Panasonic Firmware...
Sent from my Idol 3 using Tapatalk
Click to expand...
Click to collapse
Yes i know, but we need first to get in the download mode, ur indications helping us but the problem is that i'm not sure about one step :
Does he need to maintain VOLUME UP, DOWN and POWER at the same time while plugging the USB cable ? Or just maintain them, wait for the idol 3 to start and after plugging the USB cable before it load the system ? Thanks in advance. (excuse me for my poor english)
Issou said:
Yes i know, but we need first to get in the download mode, ur indications helping us but the problem is that i'm not sure about one step :
Does he need to maintain VOLUME UP, DOWN and POWER at the same time while plugging the USB cable ? Or just maintain them, wait for the idol 3 to start and after plugging the USB cable before it load the system ? Thanks in advance. (excuse me for my poor english)
Click to expand...
Click to collapse
He need to maintain VOLUME UP, DOWN and POWER at the same time then plug USB cable
Sent from my Idol 3 using Tapatalk
Alek Dev said:
He need to maintain VOLUME UP, DOWN and POWER at the same time then plug USB cable
Sent from my Idol 3 using Tapatalk
Click to expand...
Click to collapse
He told me that it was toooooooooooooooooo hard for him, don't you have any tips ? (he is some kind of a weak guy)
Issou said:
He told me that it was toooooooooooooooooo hard for him, don't you have any tips ? (he is some kind of a weak guy)
Click to expand...
Click to collapse
It's Very Easy
Oh, it worked. Thanks.
my eluga switch show black screen after pressing power+vol up+vol down keys then pressing vol up but do,nt show download mode or not download firmware
N malik said:
my eluga switch show black screen after pressing power+vol up+vol down keys then pressing vol up but do,nt show download mode or not download firmware
Click to expand...
Click to collapse
The screen remains black in download mode, aftsr you get the red screen(volume up/down and power) then volume up screen will go black and remain black, that is normal behavior...
fix this issue by me thank you
---------- Post added at 03:37 PM ---------- Previous post was at 03:30 PM ----------
or thanks kal 250. thanks to reply
Hi
Can anybody assist me with Jtagging my rog 5?
I had issues flashing software after a soft brick, now EDL doesn't even show, it's completely hard bricked. I see the software connector present where is it wasn't present in my previous Rog phone 2. However I can't find any resources online to assist me, hence I'm reaching out here. What I'm looking for is a connector, that I can connect on to the software port and do a factory software push
Any help would be greatly appreciated.
Any help on this matter, please?
Aussieboi9 said:
Any help on this matter, please?
Click to expand...
Click to collapse
Buddy i really want to help you with this are you able deassemble the device
Also try to follow these steps hold volume up connect usb and see if edl comes in the computer if not then hold volume down and try if it still didn't work try both up and down volume and connect usb cable
rais.asif786 said:
Buddy i really want to help you with this are you able deassemble the device
Also try to follow these steps hold volume up connect usb and see if edl comes in the computer if not then hold volume down and try if it still didn't work try both up and down volume and connect usb cable
Click to expand...
Click to collapse
I'm glad someone wants to help
Unfortunately I've tried everything physical, I have opened it up and I have found the software point on the main board of the internal. My only problem is, I can't find the right connector/cable so I can run a jtag and Flash the stock firmware directly to the software Point.
if suppose you don't see the edl port in manage, do make cap edl 9008, and use them for 25 seconds, you will see the device connected manually edl.