Database Info

Help unlocking bootloader on nougat version.

I've read on how to do it for MM but how do you unlock bootloader now that I upgraded to nougat? Please help!

Still_living714 said:
I've read on how to do it for MM but how do you unlock bootloader now that I upgraded to nougat? Please help!
Click to expand...
Click to collapse
• Enable Developer Options
• Then enable "USB Debugging"
• Then enable "OEM Unlock" inside Developer Options
• Now download "ADB & Fastboot" shell, get you phone in bootloader mode and type fastboot oem unlock
Remember to make a backup.
THESE STEPS WILL ERASE ALL YOUR DATA

OEM Unlock is greyed out (in the enabled position) in my version. Anyone else have same problem?
I get the error...
FAILED (remote: cannot flash this partition in unlocked state)

Let me know also as I can not get my H830 unlocked and I am on 20a

Kruzkal said:
OEM Unlock is greyed out (in the enabled position) in my version. Anyone else have same problem?
I get the error...
FAILED (remote: cannot flash this partition in unlocked state)
Click to expand...
Click to collapse
I can help you guys out if you want just pm me
SirDigitalKnight said:
Let me know also as I can not get my H830 unlocked and I am on 20a
Click to expand...
Click to collapse

Still_living714 said:
I can help you guys out if you want just pm me
Click to expand...
Click to collapse
I managed to get it to work by relocking then unlocking again. Thank you for the offer!

Kruzkal said:
I managed to get it to work by relocking then unlocking again. Thank you for the offer!
Click to expand...
Click to collapse
Glad you got it to work :good:

Please help
I tried re-locking the boot loader also but this has caused the Nougat verification checks on boot to tell me that my device is now corrupt and 'will not boot'. Im unable to get the device to a state where I can use ADB to unlock again?
All I can do is get it to factory reset mode (on LG G5) which doesn't allow me to wipe it or do anything either.
Any ideas greatly appreciated!
xM

iXam_ said:
Please help
I tried re-locking the boot loader also but this has caused the Nougat verification checks on boot to tell me that my device is now corrupt and 'will not boot'. Im unable to get the device to a state where I can use ADB to unlock again?
All I can do is get it to factory reset mode (on LG G5) which doesn't allow me to wipe it or do anything either.
Any ideas greatly appreciated!
xM
Click to expand...
Click to collapse
You can always go into download mode (hold volume up and plug the phone into a computer's USB 2.0 port) and then use LGUP (with uppercut.exe) to KDZ to stock 20A and then start over. You have to have 20A to use the recowvery method to root anyway. Nothing can be done on 20C anyway. You can get back to 20C if you want to later by flashing it through TWRP.

FRP LOCK in Bootloop there is a solution?

brick my Huawei p20 now with frp locked already tried the command "C: \ Users \ ANDRE> fastboot oem frp-unlock Q9QG9UMJ6P1WR5JL"
...
(bootloader) The device will reboot and do factory reset ...
OKAY [4.446s]
finished. total time: 4.452s "
Ps* Q9QG9UMJ6P1WR5JL is code for unlock my frp
The cell phone restarts, it resets the error and when I enter fastboot again the FRP appears again, is there any solution to this?

Hope I can help you. Please try the following steps and let us know if it works for you:
1. In fastboot, use command "fastboot oem relock Q9QG9UMJ6P1WR5JL". It should do a factory reset and bring you back to stock ROM
2. After booting into stock ROM, activate developer options
3. In developer options, activate OEM unlocking option (i.e. enable OEM unlock)
4. Reboot the phone into fastboot mode and use the command "fastboot oem unlock Q9QG9UMJ6P1WR5JL". to unlock the bootloader. The lock statuses should be changed to:
Phone: unlocked
FRP: unlocked
6. Factory reset and reboot and you should be good.

owichiu said:
Hope I can help you. Please try the following steps and let us know if it works for you:
1. In fastboot, use command "fastboot oem relock Q9QG9UMJ6P1WR5JL". It should do a factory reset and bring you back to stock ROM
2. After booting into stock ROM, activate developer options
3. In developer options, activate OEM unlocking option (i.e. enable OEM unlock)
4. Reboot the phone into fastboot mode and use the command "fastboot oem unlock Q9QG9UMJ6P1WR5JL". to unlock the bootloader. The lock statuses should be changed to:
Phone: unlocked
FRP: unlocked
6. Factory reset and reboot and you should be good.
Click to expand...
Click to collapse
Thank you very much for your attention.
Come on: Code Q9QG9UMJ6P1WR5JL is FRP unlocking. To unlock Bootloader the code is T1JR94CJQLNOWMIA
"C:\Users\ANDRE>fastboot oem relock T1JR94CJQLNOWMIA
...
FAILED (remote: stat not match)
finished. total time: 0.007s"
"C:\Users\ANDRE>fastboot oem unlock T1JR94CJQLNOWMIA
...
(bootloader) Necessary to unlock FRP!
(bootloader) Navigate to Developer options, and enable "OEM unlock"!
FAILED (remote: Command not allowed)
finished. total time: 0.022s"
Unfortunately the phone this brick, does not start the system only in fastboot and erecovery (which does not work) so I understood I need to unblock the frp to be able to perform the other task to revive my phone but when I run the "fastboot oem frp-unlock Q9QG9UMJ6P1WR5JL" everything that I have already reported in the first topic

Sorry I can't help you further but seems like your case is similar to this: https://forum.xda-developers.com/mate-10/how-to/help-bootloader-locked-frp-locked-boot-t3748976

how did you got the frp code，i just know the bootloader code。

chm1989627 said:
how did you got the frp code，i just know the bootloader code。
Click to expand...
Click to collapse
Buy on ebay

owichiu said:
Sorry I can't help you further but seems like your case is similar to this: https://forum.xda-developers.com/mate-10/how-to/help-bootloader-locked-frp-locked-boot-t3748976
Click to expand...
Click to collapse
Yes, this case was solved with DC-unlocker, it turns out they still do not support p20 = /

now, i just save my phone ,this is my way,
-1，you need have dc-phoenix account ,
-2,you need to download a full fireware package just like update-sd.zip(not firmware finder)
-3,unzip fw,open dc,in update file select upsate.app and customization file select clt~l29~hw~spcseas(the small package also in the unzip file )
-4,power off you phone,connect your phone to pc and hold vol +and vol - the phone will appear installing update 5% ,
-5 now press dc update in the below sides ,soft will begain flash file,you will waitting foe about 20min's，then your phone will be ok.
(sorry for my poor english)

chm1989627 said:
now, i just save my phone ,this is my way,
-1，you need have dc-phoenix account ,
-2,you need to download a full fireware package just like update-sd.zip(not firmware finder)
-3,unzip fw,open dc,in update file select upsate.app and customization file select clt~l29~hw~spcseas(the small package also in the unzip file )
-4,power off you phone,connect your phone to pc and hold vol +and vol - the phone will appear installing update 5% ,
-5 now press dc update in the below sides ,soft will begain flash file,you will waitting foe about 20min's，then your phone will be ok.
(sorry for my poor english)
Click to expand...
Click to collapse
Thank you very much for your help, but now I have to send my phone to technical assistance because I could not get it, if someone can use this method leave us a feedback

Huawei p20 frp unlock
Huawei p20 frp unlock
Hi if your needing to bypass the frp lock on your huawei because someone factory reset it and forgot the google id do a Google search on huawei p20 frp bypass, scroll down until you come to mobileheadlines website. They had shortcut maker app download and full instructions on how to bypass it, it worked for me no probs, aslo there is a great video by hard reset ablout frp bypassing on the p20 on you tube. Hope this helps u out dave b...

P20 Pro is bricked as well... (Need help)
I was driving in the car using google maps when all of a sudden my phone started to reboot, and got stuck in a boot loop... I haven't rooted or installed any ROMs on this device at all so I have no idea what triggered it to reboot or even get stuck in boot loop. I have it connected to my computer and have the "FASTBOOT&RESCUE MODE" screen pulled up and I can talk to it through ADB, but I have no idea where to go from here, I've been trying to follow many different threads but I cant seem to find a solution that works for me... Anyone please help!
On the "FASTBOOT&RESCUE MODE" screen it's displaying "Phone Locked" and "FRP Lock" I haven't found any tutorials on how to bypass the FRP lock for this device (While being stuck in a bootloop).
So far I've used fastboot commands
---------------------------------------------------------------------------------------------------------------------------------------------------
C:\Users\Arons Acer\Desktop\minimal_adb_fastboot_1.4.3_portable>fastboot devices
WCR7N18709000661 fastboot
C:\Users\Arons Acer\Desktop\minimal_adb_fastboot_1.4.3_portable>
---------------------------------------------------------------------------------------------------------------------------------------------------
C:\Users\Arons Acer\Desktop\minimal_adb_fastboot_1.4.3_portable>fastboot oem lock
...
FAILED (remote: Command not allowed)
finished. total time: 0.012s
---------------------------------------------------------------------------------------------------------------------------------------------------
C:\Users\Arons Acer\Desktop\minimal_adb_fastboot_1.4.3_portable>fastboot oem unlock
...
(bootloader) Necessary to unlock FRP!
(bootloader) Navigate to Developer options, and enable "OEM unlock"!
FAILED (remote: Command not allowed)
finished. total time: 0.020s

Drekko said:
brick my Huawei p20 now with frp locked already tried the command "C: \ Users \ ANDRE> fastboot oem frp-unlock Q9QG9UMJ6P1WR5JL"
...
(bootloader) The device will reboot and do factory reset ...
OKAY [4.446s]
finished. total time: 4.452s "
Ps* Q9QG9UMJ6P1WR5JL is code for unlock my frp
The cell phone restarts, it resets the error and when I enter fastboot again the FRP appears again, is there any solution to this?
Click to expand...
Click to collapse
Where can i get my FRP key???? I don't mind paying but so far nobody has been able to get me one for my Huawei P20 Pro (L29)

Bring it back to life! Unbrick the brick

Hey there, first of all I just signed up at this forum but know and love it for a long time, so please bare with me if I make some formal mistakes.
But to the Problem.
I think I played a little bit too much with my old Honor 8 FRD L09 and wiped a little bit too much but basically now it's stuck in boot (where the blue Honor logo is) and doesn't boot further.
Can go into fastboot ( Phone Unlocked, FRP Lock)
Can't go into Twrp or maybe I just don't know how (I could go into TWRP yesterday but then I did something and now I can't)
Can go into Huawei eRecovery but everytime I try to recover I get the errorcode "getting package info failed"
I don't know what version of Android is on there but I didn't do systemupdate for a long time so I think it can be as low as Android 5.X.X if thats possible ^^
When I connect with ADB devices the list of devices is empty
When I do fastboot flash recovery it give me:
C:\Users\user\Downloads\platform-tools>fastboot flash recovery_ramdisk RECOVERY-V2.img
Sending 'recovery_ramdisk' (9100 KB) OKAY [ 0.223s]
Writing 'recovery_ramdisk' FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
So yeah, I honestly don't know further and all the other Threads here to recover my phone didn't work (most of them say go into fastboot but the I always get the same error on every recovery image I try)
So is there a greater fate to my tried and true Honor 8 than beeing remembered as a bottleopener?

Pls fast help, thx guys

You have relocked your bootloader, because of that you can't install flash recovery. Now you should unlock bootloader in fastboot with this command: fastboot oem unlock <unlockcode>. Unlock code is the code which you use for unlocking the bootloader.

Sujanth said:
You have relocked your bootloader, because of that you can't install flash recovery. Now you should unlock bootloader in fastboot with this command: fastboot oem unlock <unlockcode>. Unlock code is the code which you use for unlocking the bootloader.
Click to expand...
Click to collapse
Bootloader should be unlocked cus every time I go into fastboot mode on my phone it says bootloader unlocked, but I'll devinitaly give it a try later when I am at my computer

When I tipe the code in I get this:
C:\Users\sarah\Downloads\platform-tools>adb devices
* daemon not running; starting now at tcp:5037
* daemon started successfully
List of devices attached
C:\Users\sarah\Downloads\platform-tools>fastboot oem unlock
< waiting for any device >
FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
I don't have the Unlock Code anymore. I tried to get it from the Huawai homepage but there I can register with my Huawai ID but I can't find the unlock code and I also don't know if it's even saved in my account on the homepage.
I also tried third party apps to unlock the bootloader, but with all the apps I used the phone has to be turned on and that is not possible

Check out my post for a fix
https://forum.xda-developers.com/ho...tion-guide-t3788129/post76469677#post76469677
if it helped you please hit thanks:good::good:

I was trying to downgrade to android 6 (FRD09), phone stucked at bootloop. Cant do anything. i just waited to let the battery died, and now i cant charge the phone. When i plug it to charger the screen is blinking with thunder image, so doesnt charge. When ı connect it to pc just on fastboot mode connecting. How can i restore this phone?

Doogee X95 smartphone

Hi,
I have a new X95 with Android 10 go edition. aperently I get an error message when I use some apps.
do not disturb access this feature is not available on this device
Is there anything I can do, to solve this problem?

I would like to flash another img file to the device but got all the time <wating for device> any solution for that?

Constantly get 'unauthorised', oem boot set to unlocked, usb debugging enabled, tried revoking and re-enabled no change....help

tennoguchi said:
Constantly get 'unauthorised', oem boot set to unlocked, usb debugging enabled, tried revoking and re-enabled no change....help
Click to expand...
Click to collapse
Use only this command:
Fastboot flashing unlock

I too want to unlock, root and customize the X95... And failed at the very first steps.
I hope some of the forum gurus watches this phone/thread
Here's the steps I took and the errors I got, any help would be appreciated!
1. enable "OEM unlocking" in development options
2. adb reboot fastboot
3. a) fastboot flashing unlock FAILED (remote: 'Unrecognized command flashing unlock')
3. b) fastboot oem unlock FAILED (remote: 'Command not supported in default implementation')
Also, this phone seems not to be recognized in bootloader mode (displays only "=> fastboot", but fastboot doesn't recognize any device).
When booting to recovery, entering fastboot from there (same as after "adb reboot fastboot"), I can get to the point of failure above.
I'm really uncomfortable with the current setup, any help would be appreciated!

Someone got root
Someone got root.
Thank you.

gatolocox said:
Someone got root.
Thank you.
Click to expand...
Click to collapse
This answer/question (?) is not really helpful, can you please elaborate?

Any news on how to root the x95?

Olize said:
Any news on how to root the x95?
Click to expand...
Click to collapse
I haven't tried since the failure reported above, meanwhile I got a redmi note 9s for 119€, so I'm using this one on a custom setup now.
Still using the x95 as an AP, I'm interested on any progress made on the topic..

Huawei phone:locked bootloader

I'm trying to flash a custom Android ROM on my Huawei Y6 2018 but when i'm in fastboot mode it says:
Phone: locked
FRP: unlock
I want to know how to unlock phone because when i try to install the ROM using
fastboot flash system "system_img_name".img
it says
FAILED (remote: Command not allowed)

AFAIK Huawei decided in 2018 to generally deny unlocking their devices' bootloader. Recently, they also have stopped providing bootloader unlock code to any Huawei device.

Whyte_Real said:
I'm trying to flash a custom Android ROM on my Huawei Y6 2018 but when i'm in fastboot mode it says:
....
FAILED (remote: Command not allowed)
Click to expand...
Click to collapse
In addition of the upper response, I wanted to add that some websites pretend to be able to root/unlock your Huawei device for money. They're mostly scams so please do not go there (for your sake)
And actually there are ways (very specific tho, and patched) to brute force the bootloader unlock, but the chances that it works are slim to none. (In fact I precise that because I'm sure some will come and say "No Ur. Wrong I saw that dude do it")
Have a nice day

Nevermind I just gave up trying, I unlocked everything, even bootloader and frp, but when I go installing the .img with TWRP it does not reboot after install succeed. I gave up, thanks anyway