brick my Huawei p20 now with frp locked already tried the command "C: \ Users \ ANDRE> fastboot oem frp-unlock Q9QG9UMJ6P1WR5JL"
...
(bootloader) The device will reboot and do factory reset ...
OKAY [4.446s]
finished. total time: 4.452s "
Ps* Q9QG9UMJ6P1WR5JL is code for unlock my frp
The cell phone restarts, it resets the error and when I enter fastboot again the FRP appears again, is there any solution to this?
Hope I can help you. Please try the following steps and let us know if it works for you:
1. In fastboot, use command "fastboot oem relock Q9QG9UMJ6P1WR5JL". It should do a factory reset and bring you back to stock ROM
2. After booting into stock ROM, activate developer options
3. In developer options, activate OEM unlocking option (i.e. enable OEM unlock)
4. Reboot the phone into fastboot mode and use the command "fastboot oem unlock Q9QG9UMJ6P1WR5JL". to unlock the bootloader. The lock statuses should be changed to:
Phone: unlocked
FRP: unlocked
6. Factory reset and reboot and you should be good.
owichiu said:
Hope I can help you. Please try the following steps and let us know if it works for you:
1. In fastboot, use command "fastboot oem relock Q9QG9UMJ6P1WR5JL". It should do a factory reset and bring you back to stock ROM
2. After booting into stock ROM, activate developer options
3. In developer options, activate OEM unlocking option (i.e. enable OEM unlock)
4. Reboot the phone into fastboot mode and use the command "fastboot oem unlock Q9QG9UMJ6P1WR5JL". to unlock the bootloader. The lock statuses should be changed to:
Phone: unlocked
FRP: unlocked
6. Factory reset and reboot and you should be good.
Click to expand...
Click to collapse
Thank you very much for your attention.
Come on: Code Q9QG9UMJ6P1WR5JL is FRP unlocking. To unlock Bootloader the code is T1JR94CJQLNOWMIA
"C:\Users\ANDRE>fastboot oem relock T1JR94CJQLNOWMIA
...
FAILED (remote: stat not match)
finished. total time: 0.007s"
"C:\Users\ANDRE>fastboot oem unlock T1JR94CJQLNOWMIA
...
(bootloader) Necessary to unlock FRP!
(bootloader) Navigate to Developer options, and enable "OEM unlock"!
FAILED (remote: Command not allowed)
finished. total time: 0.022s"
Unfortunately the phone this brick, does not start the system only in fastboot and erecovery (which does not work) so I understood I need to unblock the frp to be able to perform the other task to revive my phone but when I run the "fastboot oem frp-unlock Q9QG9UMJ6P1WR5JL" everything that I have already reported in the first topic
Sorry I can't help you further but seems like your case is similar to this: https://forum.xda-developers.com/mate-10/how-to/help-bootloader-locked-frp-locked-boot-t3748976
how did you got the frp code,i just know the bootloader code。
chm1989627 said:
how did you got the frp code,i just know the bootloader code。
Click to expand...
Click to collapse
Buy on ebay
owichiu said:
Sorry I can't help you further but seems like your case is similar to this: https://forum.xda-developers.com/mate-10/how-to/help-bootloader-locked-frp-locked-boot-t3748976
Click to expand...
Click to collapse
Yes, this case was solved with DC-unlocker, it turns out they still do not support p20 = /
now, i just save my phone ,this is my way,
-1,you need have dc-phoenix account ,
-2,you need to download a full fireware package just like update-sd.zip(not firmware finder)
-3,unzip fw,open dc,in update file select upsate.app and customization file select clt~l29~hw~spcseas(the small package also in the unzip file )
-4,power off you phone,connect your phone to pc and hold vol +and vol - the phone will appear installing update 5% ,
-5 now press dc update in the below sides ,soft will begain flash file,you will waitting foe about 20min's,then your phone will be ok.
(sorry for my poor english)
chm1989627 said:
now, i just save my phone ,this is my way,
-1,you need have dc-phoenix account ,
-2,you need to download a full fireware package just like update-sd.zip(not firmware finder)
-3,unzip fw,open dc,in update file select upsate.app and customization file select clt~l29~hw~spcseas(the small package also in the unzip file )
-4,power off you phone,connect your phone to pc and hold vol +and vol - the phone will appear installing update 5% ,
-5 now press dc update in the below sides ,soft will begain flash file,you will waitting foe about 20min's,then your phone will be ok.
(sorry for my poor english)
Click to expand...
Click to collapse
Thank you very much for your help, but now I have to send my phone to technical assistance because I could not get it, if someone can use this method leave us a feedback
Huawei p20 frp unlock
Huawei p20 frp unlock
Hi if your needing to bypass the frp lock on your huawei because someone factory reset it and forgot the google id do a Google search on huawei p20 frp bypass, scroll down until you come to mobileheadlines website. They had shortcut maker app download and full instructions on how to bypass it, it worked for me no probs, aslo there is a great video by hard reset ablout frp bypassing on the p20 on you tube. Hope this helps u out dave b...
P20 Pro is bricked as well... (Need help)
I was driving in the car using google maps when all of a sudden my phone started to reboot, and got stuck in a boot loop... I haven't rooted or installed any ROMs on this device at all so I have no idea what triggered it to reboot or even get stuck in boot loop. I have it connected to my computer and have the "FASTBOOT&RESCUE MODE" screen pulled up and I can talk to it through ADB, but I have no idea where to go from here, I've been trying to follow many different threads but I cant seem to find a solution that works for me... Anyone please help!
On the "FASTBOOT&RESCUE MODE" screen it's displaying "Phone Locked" and "FRP Lock" I haven't found any tutorials on how to bypass the FRP lock for this device (While being stuck in a bootloop).
So far I've used fastboot commands
---------------------------------------------------------------------------------------------------------------------------------------------------
C:\Users\Arons Acer\Desktop\minimal_adb_fastboot_1.4.3_portable>fastboot devices
WCR7N18709000661 fastboot
C:\Users\Arons Acer\Desktop\minimal_adb_fastboot_1.4.3_portable>
---------------------------------------------------------------------------------------------------------------------------------------------------
C:\Users\Arons Acer\Desktop\minimal_adb_fastboot_1.4.3_portable>fastboot oem lock
...
FAILED (remote: Command not allowed)
finished. total time: 0.012s
---------------------------------------------------------------------------------------------------------------------------------------------------
C:\Users\Arons Acer\Desktop\minimal_adb_fastboot_1.4.3_portable>fastboot oem unlock
...
(bootloader) Necessary to unlock FRP!
(bootloader) Navigate to Developer options, and enable "OEM unlock"!
FAILED (remote: Command not allowed)
finished. total time: 0.020s
Drekko said:
brick my Huawei p20 now with frp locked already tried the command "C: \ Users \ ANDRE> fastboot oem frp-unlock Q9QG9UMJ6P1WR5JL"
...
(bootloader) The device will reboot and do factory reset ...
OKAY [4.446s]
finished. total time: 4.452s "
Ps* Q9QG9UMJ6P1WR5JL is code for unlock my frp
The cell phone restarts, it resets the error and when I enter fastboot again the FRP appears again, is there any solution to this?
Click to expand...
Click to collapse
Where can i get my FRP key???? I don't mind paying but so far nobody has been able to get me one for my Huawei P20 Pro (L29)
Related
Hello,
i wanted to root my Huawei P8max (Android 6.0 Emui 4.0) with a guide from xda (http://forum.xda-developers.com/p8max/general/p8max-root-guide-d-701l-d-703l-t3269213)
I already have my Bootloader Code but in the 6. step typing fastboot oem unlock xxx (xxx=bootloader Code) i get a FAILED (remote: Necessary to unlock FRP).
So i removed the Google account in Settings and did a factory reset. In the beginning configuration of the phone, the phone didn't ask me for the old Google account. I thought that the FRP Lock is gone. But when I go to Fastboot & Rescue Mode there is still Standing "Phone Unlocked / FPR Lock".
I tried the 6.step again and i got still the same message FAILED (remote: Necessary to unlock FRP).
So i googled it and found out that i have to go to Settings and disable "OEM Unlock". But I don't have These Kind of Option in my Settings.
Then i did an upgrade to Android 5.1 Emui 3.1, i thought that i can find the OEM Unlock Option there but didn't find it.
Then i rooted my device with Kingroot which is only possivle with Android 5.1 and wanted to unlock Bootloader in the hope that the bootloader is still unlocked when i upgrade it to Android 6.0 but still in Android 5.1 i am not able to unlock the bootloader neither to install TWRP. I always get the FAILED (remote: Necessary to unlock FRP) message.
Can anyone help me to remove the FRP lock?
Thanks
Yaman
fyaman66 said:
Hello,
i wanted to root my Huawei P8max (Android 6.0 Emui 4.0) with a guide from xda (http://forum.xda-developers.com/p8max/general/p8max-root-guide-d-701l-d-703l-t3269213)
I already have my Bootloader Code but in the 6. step typing fastboot oem unlock xxx (xxx=bootloader Code) i get a FAILED (remote: Necessary to unlock FRP).
So i removed the Google account in Settings and did a factory reset. In the beginning configuration of the phone, the phone didn't ask me for the old Google account. I thought that the FRP Lock is gone. But when I go to Fastboot & Rescue Mode there is still Standing "Phone Unlocked / FPR Lock".
I tried the 6.step again and i got still the same message FAILED (remote: Necessary to unlock FRP).
So i googled it and found out that i have to go to Settings and disable "OEM Unlock". But I don't have These Kind of Option in my Settings.
Then i did an upgrade to Android 5.1 Emui 3.1, i thought that i can find the OEM Unlock Option there but didn't find it.
Then i rooted my device with Kingroot which is only possivle with Android 5.1 and wanted to unlock Bootloader in the hope that the bootloader is still unlocked when i upgrade it to Android 6.0 but still in Android 5.1 i am not able to unlock the bootloader neither to install TWRP. I always get the FAILED (remote: Necessary to unlock FRP) message.
Can anyone help me to remove the FRP lock?
Thanks
Yaman
Click to expand...
Click to collapse
Have you tried looking in developer options? That's where mines is.
Sent from my HUAWEI P8max using XDA-Developers mobile app
kingkea said:
Have you tried looking in developer options? That's where mines is.
Sent from my HUAWEI P8max using XDA-Developers mobile app
Click to expand...
Click to collapse
Hi Kingkea,
yes i looked there but i don't have this Option. Which Firmware do you have installed on your P8max?
you need HCU Client ... (paid tool )
sorry i don't have OEM unlock in developer Setting. which Firmware do you use? im on DAV-701LC209B203 now.
And i found out that my bootloader is already unlocked. So i jumped over to "Android 6 Flash Insecure Boot.img" and tried to do the 6. Type: fastboot flash boot boot.img.
Here i get a similar Problem like FAILED (remote: command not allowed)
any idea?
how to relock the bootloader:
First of all you're gonna need:
- A PC/Android SDK/ADB Toolkit
- An android with an unlocked bootloader
- A usb cable connected to the device
I made this thread because I had the same problem but I found a way to fix it! I was trying to load into a corrupted recovery and it kept being stuck on the "Your device is unlocked and cant be trusted, your device is booting now" thingy, but I found my way out and it's really easy!
Tutorial:
Steps:
- 1: Hold the power button down till your phone shuts down and re-open by also holding down the "volume-down" key, so it loads into fastboot.
- 2: Go onto your pc/mac (cmd/terminal) and type the command "fastboot oem relock <your unlock number>". Then it should be something like this:
fastboot oem relock <your unlock number>
(bootloader) The device will reboot and do factory reset...
OKAY [ 15.785s]
finished. total time: 15.785s
Click to expand...
Click to collapse
To get your "unlock number" take a look at this:
-We get our Unlock Code for Bootloader, write it somewhere !-
^^^ This is on the emui website = emui . com
(XDA doesnt allow me to add a picture of what I mean because I'm a new user )
If you need more help, leave a comment below! :good::laugh:
Why i got this message that say failed?
As HMD releases the source code of nokia 5.1 plus/x5, now the community can work on the development of nokia mobile.
https://www.nokia.com/phones/en_int/opensource/
We still have the waiting game to see if they will let us unlock the bootloader. I don't see why they would release that if they have no plans to allow unlocked bootloaders. If anyone knows of any way we can help to get it done quicker, it would be good to know. Like a petition to unlock bootloader.
rustdroid said:
We still have the waiting game to see if they will let us unlock the bootloader. I don't see why they would release that if they have no plans to allow unlocked bootloaders. If anyone knows of any way we can help to get it done quicker, it would be good to know. Like a petition to unlock bootloader.
Click to expand...
Click to collapse
In my country ,china, a person who name is HCT_Mascot_洛克人EFI in weibo say he has already unlocked the bootloader and in the taobao which same as ebay you can unlock it by 30rmb. I don't know how they make it why they don't release it.
Yes I heard you can pay $5 to get bootloader unlocked but I haven't seen anyone with the bootloader unlocked yet so don't know if it's true. I don't think we should have to pay anything. They should share how they are doing it so we can all do it for free.
https://www.nokia.com/phones/en_int/bootloader/
You can unlock the bootloader using this site officialy by nokia....not tested but it's official nokia website
thevasugoel said:
https://www.nokia.com/phones/en_int/bootloader/
You can unlock the bootloader using this site officialy by nokia....not tested but it's official nokia website
Click to expand...
Click to collapse
That is only for Nokia 8. I tried when I first got the phone app just crashes.
you can unlock x5 (5.1 plus) bootloader by putting your phone in fastboot/bootloader mode and typing "fastboot flashing unlock" in cmd (you need to connect your phone to a pc with adb and adb drivers)
CapKenway said:
you can unlock x5 (5.1 plus) bootloader by putting your phone in fastboot/bootloader mode and typing "fastboot flashing unlock" in cmd (you need to connect your phone to a pc with adb and adb drivers)
Click to expand...
Click to collapse
Doesn't work for me. Tried it when i first got the phone.
rustdroid said:
Doesn't work for me. Tried it when i first got the phone.
Click to expand...
Click to collapse
Are you on pie? To my experience, i didnt work on oreo.
CapKenway said:
Are you on pie? To my experience, i didnt work on oreo.
Click to expand...
Click to collapse
Yes i'm on Pie, I read that it can't be done on Pie. i'm just going to wait until Nokia allows it, If they do.
rustdroid said:
Yes i'm on Pie, I read that it can't be done on Pie. i'm just going to wait until Nokia allows it, If they do.
Click to expand...
Click to collapse
I was able to do it and i am on pie.
CapKenway said:
I was able to do it and i am on pie.
Click to expand...
Click to collapse
Show some proof that you have unlocked bootloader ?
Well, I sold my X5 and now I am using a Oneplus 3t
If you are on pie, first enable the developer options, then access the developer options menu, switch the developer options off, then back on, you can slide the OEM unlocking switch to on and confirm it with password/figure. After that switch the ADB on, connect the phone to computer via usb and "sudo adb reboot bootloader" ...
sudo fastboot flashing get_unlock_ability
...
(bootloader) unlock_ability = 16777216
OKAY [ 0.008s]
finished. total time: 0.008s
So it's now in somekind of state it can be unlocked...
However: sudo fastboot flashing unlock_critical
...
(bootloader) Start unlock flow
FAILED (remote:
Unlock operation is not allowed
)
homopetteri said:
If you are on pie, first enable the developer options, then access the developer options menu, switch the developer options off, then back on, you can slide the OEM unlocking switch to on and confirm it with password/figure. After that switch the ADB on, connect the phone to computer via usb and "sudo adb reboot bootloader" ...
sudo fastboot flashing get_unlock_ability
...
(bootloader) unlock_ability = 16777216
OKAY [ 0.008s]
finished. total time: 0.008s
So it's now in somekind of state it can be unlocked...
However: sudo fastboot flashing unlock_critical
...
(bootloader) Start unlock flow
FAILED (remote:
Unlock operation is not allowed
)
Click to expand...
Click to collapse
Yeah same thing for me, but
Code:
(bootloader) unlock_ability = 16777216
clearly said that the bootloader is unlockable
in Google devices a
Code:
fastboot flashing unlock_critical
should come with:
Code:
(bootloader) Start unlock flow
OKAY [ 38.004s]
finished. total time: 38.004s
$ fastboot reboot
Deleted
Hey there, first of all I just signed up at this forum but know and love it for a long time, so please bare with me if I make some formal mistakes.
But to the Problem.
I think I played a little bit too much with my old Honor 8 FRD L09 and wiped a little bit too much but basically now it's stuck in boot (where the blue Honor logo is) and doesn't boot further.
Can go into fastboot ( Phone Unlocked, FRP Lock)
Can't go into Twrp or maybe I just don't know how (I could go into TWRP yesterday but then I did something and now I can't)
Can go into Huawei eRecovery but everytime I try to recover I get the errorcode "getting package info failed"
I don't know what version of Android is on there but I didn't do systemupdate for a long time so I think it can be as low as Android 5.X.X if thats possible ^^
When I connect with ADB devices the list of devices is empty
When I do fastboot flash recovery it give me:
C:\Users\user\Downloads\platform-tools>fastboot flash recovery_ramdisk RECOVERY-V2.img
Sending 'recovery_ramdisk' (9100 KB) OKAY [ 0.223s]
Writing 'recovery_ramdisk' FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
So yeah, I honestly don't know further and all the other Threads here to recover my phone didn't work (most of them say go into fastboot but the I always get the same error on every recovery image I try)
So is there a greater fate to my tried and true Honor 8 than beeing remembered as a bottleopener?
Pls fast help, thx guys
You have relocked your bootloader, because of that you can't install flash recovery. Now you should unlock bootloader in fastboot with this command: fastboot oem unlock <unlockcode>. Unlock code is the code which you use for unlocking the bootloader.
Sujanth said:
You have relocked your bootloader, because of that you can't install flash recovery. Now you should unlock bootloader in fastboot with this command: fastboot oem unlock <unlockcode>. Unlock code is the code which you use for unlocking the bootloader.
Click to expand...
Click to collapse
Bootloader should be unlocked cus every time I go into fastboot mode on my phone it says bootloader unlocked, but I'll devinitaly give it a try later when I am at my computer
When I tipe the code in I get this:
C:\Users\sarah\Downloads\platform-tools>adb devices
* daemon not running; starting now at tcp:5037
* daemon started successfully
List of devices attached
C:\Users\sarah\Downloads\platform-tools>fastboot oem unlock
< waiting for any device >
FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
I don't have the Unlock Code anymore. I tried to get it from the Huawai homepage but there I can register with my Huawai ID but I can't find the unlock code and I also don't know if it's even saved in my account on the homepage.
I also tried third party apps to unlock the bootloader, but with all the apps I used the phone has to be turned on and that is not possible
Check out my post for a fix
https://forum.xda-developers.com/ho...tion-guide-t3788129/post76469677#post76469677
if it helped you please hit thanks:good::good:
I was trying to downgrade to android 6 (FRD09), phone stucked at bootloop. Cant do anything. i just waited to let the battery died, and now i cant charge the phone. When i plug it to charger the screen is blinking with thunder image, so doesnt charge. When ı connect it to pc just on fastboot mode connecting. How can i restore this phone?
The problem occurs when trying to unlock the bootloader of the cell phone, this error appears on the console:
"
...
FAILED (remote: unknown command)
finished. total time: 0.021s"
If anyone can help me, I would appreciate it very much, I am something new in this whole topic.
You need to turn on OEM unlock. You can do this using developer option.
Start mobile in fastboot mode.
Mobilelearner said:
You need to turn on OEM unlock. You can do this using developer option.
Start mobile in fastboot mode.
Click to expand...
Click to collapse
The OEM unlock is "On", and the error keeps coming up. And the mobile is also in fastboot mode.