HI. Please help me! I wasn't able to modify an article on the WIKI (wiki.xda-developers.com).
All the time I press the "Edit" Button, FireFox give me the option to download the php file :?: :?: :shock: WEIRD
The address I was modifying was:
http://wiki.xda-developers.com/index.php?pagename=List of HimaUpgradeUt.exe Error Code
After trying it several times, I could get inside and edit the page, then I saved it, and now is BLANK!!!!
HEEEEELLPPPP
The contets of the page at the time of my edit were:
--------------------------
ERROR 100: MODEL ID ERROR
Definition: ROM image is not design for the device you are upgrading. It happens when you try to use Himalaya's ROM image into other HTC like MAGICIAN, BlueAngel or Alpine
Solution: Use appropriate ROM Upgrade image for your Device, no two device can share the same ROM
ERROR 101: CONNECTION ERROR
ERROR 102: CE IMAGE FILE CHECKSUM ERROR
ERROR 103: ROM IMAGE FILE NOT FOUND
ERROR 104: CANNOT OPEN ROM IMAGE FILE
ERROR 105: OPEN PORT FAILURE
ERROR 106: EXECUTE REMOTE COMMUNICATION PROGRAM FAILURE
WARNING 111: POWER ADAPTER NOT PLUGGED IN
ERROR 112: CE ROM UPDATE ERROR
ERROR 113: EXTENDED ROM UPDATE ERROR
ERROR 114: RADIO ROM UPDATE ERROR
ERROR 115: INVALID VERSION OF ACTIVESYNC
ERROR:116 GENERAL ERROR
ERROR 117: INVALID MODEL ID
ERROR 120: COUNTRY ID ERROR
ERROR 121: LANGUAGE ID ERROR
ERROR 122: EXTENDED IMAGE FILE CHECKSUM ERROR
ERROR 123: RADIO IMAGE FILE CHECKSUM ERROR
ERROR 130: CREATE CE ROM IMAGE ERROR
ERROR 131: ALLOCATE MEMORY ERROR
ERROR 132: WRITE DATA ERROR
ERROR 133: COMMUNICATION ERROR
ERROR 134: READ CE ROM IMAGE ERROR
ERROR 135: COMMUNICATION ERROR
ERROR 136: COMMUNICATION INTERRUPT
ERROR 137: COMMUNICATION ERROR
ERROR 150: ROM UPGRADE UTILITY ERROR
ERROR 200: WRITE EXTENDED ROM FAIL
Error 201: GET DEVICE DATA ERROR
This error is a bit misleading. The BAUpdate tool is trying to switch the phone into bootloader mode, and the phone for some reason is being uncooperative. This happens to me from time to time. The best, and quickest way around this is to force the phone into Bootloader manually. By pressing the record button, while doing a hard reset (Power + Reset) your phone will enter bootloader mode. You can verify this as the screen will say, Serial, and change to USB when you cradle it.
Once you cradle your phone, Windows will detect it as new hardware, and take a minute or two configure the right driver(Microsoft USB Sync). Once this is complete, you can run the BAUpgrade utility again, and this time you should get past error 201.
Error 202: READ IMAGE ERROR
ERROR 210: CREATE EXTENDED ROM IMAGE ERROR
ERROR 211: ALLOCATE MEMORY ERROR
ERROR 212: WRITE DATA ERROR
ERROR 213: COMMUNICATION ERROR
ERROR 214: READ EXTENDED ROM IMAGE ERROR
ERROR 215 COMMUNICATION ERROR
ERROR 216: COMMUNICATION INTERRUPT
ERROR 310: CREATE RADIO ROM IMAGE ERROR
ERROR 311: ALLOCATE MEMORY ERROR
ERROR 312: WRITE DATA ERROR
ERROR 313: COMMUNICATION ERROR
ERROR 314: READ RADIO ROM IMAGE ERROR
ERROR 315: COMMUNICATION ERROR
ERROR 316: COMMUNICATION INTERRUPT
ERROR 317: COMMUNICATION ERROR
Hi,
I tried it too & have simular probs in changing any wiki page @ the moment. IMHO there's something wrong on the serverside cause the text is still present but compilation into a page fails.
Try again later is my suggestion.
Cheers, M
Yup, I thought it was a temporary problem. Moreover, I'm having the same strange behaviour in some wiki links.
For instance:
http://wiki.xda-developers.com/index.php?pagename=BA_Versions
It is the first link on this page:
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Upgrade_Radio
Thanks for your answer. I'll try later........
oltp said:
Hi,
I tried it too & have simular probs in changing any wiki page @ the moment. IMHO there's something wrong on the serverside cause the text is still present but compilation into a page fails.
Try again later is my suggestion.
Cheers, M
Click to expand...
Click to collapse
If the problem persists you can always pm 'peter poelman' or another moderator, maybe they can fix it.
The way it is now, we'll have a very empty wiki soon. Luckily the preview shows the same errors & peolpe should be warned by that, so as long as people don't save any changes to a page...
Luckily, I think you can allways get an older version of the page.
Cheers
oltp said:
If the problem persists you can always pm 'peter poelman' or another moderator, maybe they can fix it.
The way it is now, we'll have a very empty wiki soon. Luckily the preview shows the same errors & peolpe should be warned by that, so as long as people don't save any changes to a page...
Click to expand...
Click to collapse
arieltools said:
Luckily, I think you can allways get an older version of the page.
Click to expand...
Click to collapse
Ok learned something again, I didn't know that.
Good afternoon. I've installed two different programs and after installation, trying to run them i get error messages, as follow :
1) Program EventCountdownV2.2.exe. After installation (either in device, or
storage card), when i run the program i get this error message :
There is an unexpected error in application EventCountdownV2.2.exe. Choose "End" and then run this program again or choose "Details" for more details.
Details :
EventCountdownV2.2.exe
InvalidCastException
in Microsoft.VisualBasic.CompilerServices.Conversions.ToDate()
in RFTEventCountdown.form1.ListBox1_SelectedIndexChanged()
in System.Windows.Forms.ListBox.OnSelectedIndexChanged()
in System.Windows.Forms.Control._InternalWnProc()
in Microsoft.AGL.Forms.CTL.ListBox.set_SelectedIndex()
in RFTEventCountdown.form1.form1_Load()
in System.Windows.Forms.Form.OnLoad()
in System.Windows.Forms.Form_SetVisibleNotify()
in System.Windows.Forms.Control.set_Visible()
in System.Windows.Forms.Application.Run()
in RFTEventCountdown.form1.Main()
2) Program iFonz-0.9.4.exe. After installation (either in device, or
storage card), when i run the program i get this error message :
There is an unexpected error in application iFonz.exe. Choose "End" and then run this program again or choose "Details" for more details.
The query string is incorrectly formatted.
It is not possible to show error message because it is not possible to find optional sources retention.
Details :
iFonz.exe
ArgumentException
The query string is incorrectly formatted.
It is not possible to show error message because it is not possible to find optional sources retention.
in Microsoft.WindowsMobile.PocketOutlook.AppointmentCollection.Restrict()
in iFonz.iFonz.SetTopAndBallons()
in iFonz.iFonz.iFonz_Load()
in System.Windows.Forms.Form.OnLoad()
in System.Windows.Forms.Form_SetVisibleNotify()
in System.Windows.Forms.Control.set_Visible()
in System.Windows.Forms.Application.Run()
in iFonz.iFonz.Main()
Can somebody help me ? Is there any idea why this hapen? Any solution ? I tried to update .NET Compact Framework 3.5 Redistributable (installation sucsseful), but no results. Still get errors.
Regards
Kostas
Today I installed Flinney's CM10.1 build 8 onto my Desire S after wiping it clean first.
I also experienced the framework reboot just now.
As I can't post in the development forums...
Please find attached my logfiles (kmesg and logcat) just after the framework reboot.
View attachment 1617416
Had another Framework reboot around 21:55... (had one yesterday and this morning, but not the possibility to grab logfiles)
Pulled a 'logcat' and 'logcat -v long' (see attached).
Found a fatal at 21:56:27... hope this helps to debug the issue more.
View attachment 2013-01-07.zip
Requirements:
*Catlog/Logcat app
How to read errors:
*Force close first the app you want to logcat
*Open Catlog and set the log level to error
Find/Search the AndroidRuntime then the app will show this:
E - FATAL EXCEPTION: main
E - Process: com blah blah <- The app that has error
E - java.lang.RuntimeException: NoSuchFieldError blah blah <- The error of the app
E - at blah blah(java:###) <- the smali or xml where the error occurs
(java:###) <- the .line in the smali where the error is placed
Errors I encounted as of when I started theming::cyclops::cyclops:
NoSuchMethodError - means there is a missing .method in the smali
NoSuchFieldError - means there is a missing .field in the smali
AbstractMethodError - means there is a missing Abstract method in the smali
Content.res - means wrong ID(0x7xxxxxxxx)
Unable to start activity - means the smali address it wrong or the code you declare is wrong
Note:
Not yet finished, Still thinking of the errors I encountered :v
Comment below the errors you encountered that is not stated in the guide
I will include logcat reading in porting system apps
#WeAreTeamPussy
credits :
Material Modding Team
XDA
Underground
MAAaD
MAAaDR
Maximum Team
Android Matrix Team
I bought this used device like a month ago and for some days my phone has been randomly rebooting in every 15-30 minutes of usage.
I've tried following things:
1.Other ROMs( Lineage, Xiaomi.eu etc.)
2.Fastboot clean flash and lock.
These haven't solved my problem.
So I tried to save a log just before reboot.
The log contains a reoccurring error which says:
06-19 01:00:30.240 E/subsystem_ramdump(15079): Directory /sdcard/ramdump does not exist
06-19 01:00:30.240 E/subsystem_ramdump(15079): Unable to create /sdcard/ramdump
06-19 01:00:30.240 E/subsystem_ramdump(15079): Failed to initialize ramdump
and some other error is which is less consistent :
06-19 01:00:28.225 E/GpuMonitor(15060): fital error, can not mkdir:/sdcard/MIUI/debug_log/common, errno:13
and :
06-19 01:00:25.573 E/AudioFlinger(788): open /proc/1583/cmdline error
Is it a non fixable Hardware problem or are there any work around for this?
Did u try to flash custom kernel like BG345?