Related
HI. Please help me! I wasn't able to modify an article on the WIKI (wiki.xda-developers.com).
All the time I press the "Edit" Button, FireFox give me the option to download the php file :?: :?: :shock: WEIRD
The address I was modifying was:
http://wiki.xda-developers.com/index.php?pagename=List of HimaUpgradeUt.exe Error Code
After trying it several times, I could get inside and edit the page, then I saved it, and now is BLANK!!!!
HEEEEELLPPPP
The contets of the page at the time of my edit were:
--------------------------
ERROR 100: MODEL ID ERROR
Definition: ROM image is not design for the device you are upgrading. It happens when you try to use Himalaya's ROM image into other HTC like MAGICIAN, BlueAngel or Alpine
Solution: Use appropriate ROM Upgrade image for your Device, no two device can share the same ROM
ERROR 101: CONNECTION ERROR
ERROR 102: CE IMAGE FILE CHECKSUM ERROR
ERROR 103: ROM IMAGE FILE NOT FOUND
ERROR 104: CANNOT OPEN ROM IMAGE FILE
ERROR 105: OPEN PORT FAILURE
ERROR 106: EXECUTE REMOTE COMMUNICATION PROGRAM FAILURE
WARNING 111: POWER ADAPTER NOT PLUGGED IN
ERROR 112: CE ROM UPDATE ERROR
ERROR 113: EXTENDED ROM UPDATE ERROR
ERROR 114: RADIO ROM UPDATE ERROR
ERROR 115: INVALID VERSION OF ACTIVESYNC
ERROR:116 GENERAL ERROR
ERROR 117: INVALID MODEL ID
ERROR 120: COUNTRY ID ERROR
ERROR 121: LANGUAGE ID ERROR
ERROR 122: EXTENDED IMAGE FILE CHECKSUM ERROR
ERROR 123: RADIO IMAGE FILE CHECKSUM ERROR
ERROR 130: CREATE CE ROM IMAGE ERROR
ERROR 131: ALLOCATE MEMORY ERROR
ERROR 132: WRITE DATA ERROR
ERROR 133: COMMUNICATION ERROR
ERROR 134: READ CE ROM IMAGE ERROR
ERROR 135: COMMUNICATION ERROR
ERROR 136: COMMUNICATION INTERRUPT
ERROR 137: COMMUNICATION ERROR
ERROR 150: ROM UPGRADE UTILITY ERROR
ERROR 200: WRITE EXTENDED ROM FAIL
Error 201: GET DEVICE DATA ERROR
This error is a bit misleading. The BAUpdate tool is trying to switch the phone into bootloader mode, and the phone for some reason is being uncooperative. This happens to me from time to time. The best, and quickest way around this is to force the phone into Bootloader manually. By pressing the record button, while doing a hard reset (Power + Reset) your phone will enter bootloader mode. You can verify this as the screen will say, Serial, and change to USB when you cradle it.
Once you cradle your phone, Windows will detect it as new hardware, and take a minute or two configure the right driver(Microsoft USB Sync). Once this is complete, you can run the BAUpgrade utility again, and this time you should get past error 201.
Error 202: READ IMAGE ERROR
ERROR 210: CREATE EXTENDED ROM IMAGE ERROR
ERROR 211: ALLOCATE MEMORY ERROR
ERROR 212: WRITE DATA ERROR
ERROR 213: COMMUNICATION ERROR
ERROR 214: READ EXTENDED ROM IMAGE ERROR
ERROR 215 COMMUNICATION ERROR
ERROR 216: COMMUNICATION INTERRUPT
ERROR 310: CREATE RADIO ROM IMAGE ERROR
ERROR 311: ALLOCATE MEMORY ERROR
ERROR 312: WRITE DATA ERROR
ERROR 313: COMMUNICATION ERROR
ERROR 314: READ RADIO ROM IMAGE ERROR
ERROR 315: COMMUNICATION ERROR
ERROR 316: COMMUNICATION INTERRUPT
ERROR 317: COMMUNICATION ERROR
Hi,
I tried it too & have simular probs in changing any wiki page @ the moment. IMHO there's something wrong on the serverside cause the text is still present but compilation into a page fails.
Try again later is my suggestion.
Cheers, M
Yup, I thought it was a temporary problem. Moreover, I'm having the same strange behaviour in some wiki links.
For instance:
http://wiki.xda-developers.com/index.php?pagename=BA_Versions
It is the first link on this page:
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Upgrade_Radio
Thanks for your answer. I'll try later........
oltp said:
Hi,
I tried it too & have simular probs in changing any wiki page @ the moment. IMHO there's something wrong on the serverside cause the text is still present but compilation into a page fails.
Try again later is my suggestion.
Cheers, M
Click to expand...
Click to collapse
If the problem persists you can always pm 'peter poelman' or another moderator, maybe they can fix it.
The way it is now, we'll have a very empty wiki soon. Luckily the preview shows the same errors & peolpe should be warned by that, so as long as people don't save any changes to a page...
Luckily, I think you can allways get an older version of the page.
Cheers
oltp said:
If the problem persists you can always pm 'peter poelman' or another moderator, maybe they can fix it.
The way it is now, we'll have a very empty wiki soon. Luckily the preview shows the same errors & peolpe should be warned by that, so as long as people don't save any changes to a page...
Click to expand...
Click to collapse
arieltools said:
Luckily, I think you can allways get an older version of the page.
Click to expand...
Click to collapse
Ok learned something again, I didn't know that.
Hello everyone,
I'm facing a quite strange and annoying issue on a TF700T.
No matter which ROM I'm running with, Google Play tells me updates need to be done, which is normal. When I start the updates, the downloads pause at 4% for most of them, and will never end, even after 4 days of activity.
A tablet on which you cannot download content to, or install apps is not very usefull.
The problem is the same with other download types (if I browse on the navigator, to download a ROM.zip, download starts and stops at 4%)
A friend gave me this tablet with Cromi-X insttaled on it. I first thought it was a ROM issue, so I flashed CM11 stable version, just to see.
Problem is the same.
I tried with different google accounts, I cleared Google Play cache services.
No effect.
I also flashed the ASUS original firmware using the SD card mthod, and problem is still there.
I'm short on ideas now, I've looked in XDA forum, but never found a thread with similar issues.
Tablet is currently running Android 4.1.1 WW10.4.4.25-20121228 A03 and unlocked
Thank you very much for your help or advices,
Nicolas
Hi again,
I have made progress on this strange issue.
I finally managed to get google play and downloads to work, but I have to use a vpn client so it can work.
I tried VPN Hideninja.
And, I have the issue no matter which rom/ android version I use.
So, it's a workaround, but at least it allows the tablet to be "usable".
Does someone has any ideas where the problem could come from? (bad kernel version?...)
Or, maybe someone knows a tool to check Android configuration issue, network configuration (I've searched but didnn't find something yet, but I keep trying )
Thank you for your help
Nicolas
Hi,
I installed cromi-X on the tablet and combi-kk as rom2Sd. Bith rom start, but I still have the issues with the playstore.
Does anyone know a tool to perform a hardware check?
If I want to completely clean the tablet, what would you advise ? Right now I'm trying to figure out if the problem is hardware or software.
Thank you for your help
Nicolas
nvuillem said:
Hi,
I installed cromi-X on the tablet and combi-kk as rom2Sd. Bith rom start, but I still have the issues with the playstore.
Does anyone know a tool to perform a hardware check?
If I want to completely clean the tablet, what would you advise ? Right now I'm trying to figure out if the problem is hardware or software.
Thank you for your help
Nicolas
Click to expand...
Click to collapse
Search how to do a logcat over adb and post the resulting text file. Do it after you attempted to download something.
sbdags said:
Search how to do a logcat over adb and post the resulting text file. Do it after you attempted to download something.
Click to expand...
Click to collapse
Hi Sdbags, first of all thank you for your interest.
I've made 3 logcatfiles:
#1 on the rom2sd crombi-kk before downloading. logcatkkStartUp.txt
#2 after stopping downloading as it was frozen. logcatkkDLFails.txt
#3 same as #2 but running on cromi-X on the internal memory of the pad logcatX.txt
I believe this is not looking good:
W/NetworkManagementSocketTagger( 1280): untagSocket(94) failed with errno -22
I/qtaguid ( 1280): Failed write_ctrl(u 56) res=-1 errno=22
I/qtaguid ( 1280): Untagging socket 56 failed errno=-22
Thanks again for your help,
Thank you
Nicolas
nvuillem said:
Hi Sdbags, first of all thank you for your interest.
I've made 3 logcatfiles:
#1 on the rom2sd crombi-kk before downloading. logcatkkStartUp.txt
#2 after stopping downloading as it was frozen. logcatkkDLFails.txt
#3 same as #2 but running on cromi-X on the internal memory of the pad logcatX.txt
I believe this is not looking good:
W/NetworkManagementSocketTagger( 1280): untagSocket(94) failed with errno -22
I/qtaguid ( 1280): Failed write_ctrl(u 56) res=-1 errno=22
I/qtaguid ( 1280): Untagging socket 56 failed errno=-22
Thanks again for your help,
Thank you
Nicolas
Click to expand...
Click to collapse
Well there are some hints in there. As this happens on every rom I'm going to stick my neck out and say it's nothing to do with the ROM you in stall
The below appears to be trying to update Google Street View.
Code:
I/GoogleHttpClient( 832): Falling back to old http client 0 java.lang.NoSuchMethodException: <init> [class android.content.Context, class java.lang.String, boolean]
D/SurfaceControl( 622): Excessive delay in blankDisplay() while turning screen off: 107ms
W/ActivityThread( 832): ClassLoader.loadClass: The class loader returned by Thread.getContextClassLoader() may fail for processes that host multiple applications. You should explicitly specify a context class loader. For example: Thread.setContextClassLoader(getClass().getClassLoader());
I/auditd ( 9847): Starting up
E/auditd ( 9847): Failed on audit_set_pid with error: Protocol not supported
I/auditd ( 9847): Exiting
I/auditd ( 9850): Starting up
E/auditd ( 9850): Failed on audit_set_pid with error: Protocol not supported
I/auditd ( 9850): Exiting
I/auditd ( 9853): Starting up
E/auditd ( 9853): Failed on audit_set_pid with error: Protocol not supported
I/auditd ( 9853): Exiting
I/auditd ( 9858): Starting up
E/auditd ( 9858): Failed on audit_set_pid with error: Protocol not supported
I/auditd ( 9858): Exiting
I/auditd ( 9863): Starting up
E/auditd ( 9863): Failed on audit_set_pid with error: Protocol not supported
I/auditd ( 9863): Exiting
D/Finsky ( 2075): [1] DownloadQueueImpl.notifyProgress: com.google.android.street: onProgress 185420/264451 Status: 192.
D/MarketUpdateReceiver( 9689): market is downloading (0%): com.google.android.street
I/DownloadManager( 1842): Download 22 starting
D/MarketUpdateReceiver( 9689): market is downloading (0%): com.google.android.street
I/auditd ( 9871): Starting up
E/auditd ( 9871): Failed on audit_set_pid with error: Protocol not supported
I/auditd ( 9871): Exiting
I/auditd ( 9876): Starting up
E/auditd ( 9876): Failed on audit_set_pid with error: Protocol not supported
I/auditd ( 9876): Exiting
I/auditd ( 9879): Starting up
E/auditd ( 9879): Failed on audit_set_pid with error: Protocol not supported
I/auditd ( 9879): Exiting
I/auditd ( 9882): Starting up
E/auditd ( 9882): Failed on audit_set_pid with error: Protocol not supported
I/auditd ( 9882): Exiting
D/MarketUpdateReceiver( 9689): market is downloading (0%): com.google.android.street
W/DownloadManager( 1842): Aborting request for download 22: Failed reading response: java.net.SocketTimeoutException
I/DownloadManager( 1842): Download 22 finished with status WAITING_TO_RETRY
auditd is the Selinux logging facility... Protocol not supported means Linux kernel is missing the SELinux protocol...
So possibly you are on an older bootloader that doesn't support the right kernel ....
What bootloader and version of TWRP are you on exactly?
AH WE HAVE A WINNER
Tablet is currently running Android 4.1.1 WW10.4.4.25-20121228 A03 and unlocked
You need to update your bootloader and TWRP. Flash my update package from the CROM-X first post and then follow the instructions to move to a later TWRP if you want to try a CM11 base
Hi Sdbags,
upon startup, bootloader version shows "WW_epad-10.6.1.14.4-20130329" A03, and TWRP is v2.6.3-that3.
I can atach pictures if you want.
Ciould it be that a part of the tablet has the right bootloader version, and another part d not have that correct version?
Thank you for your help
Nicolas
nvuillem said:
Hi Sdbags,
upon startup, bootloader version shows "WW_epad-10.6.1.14.4-20130329" A03, and TWRP is v2.6.3-that3.
I can atach pictures if you want.
Ciould it be that a part of the tablet has the right bootloader version, and another part d not have that correct version?
Thank you for your help
Nicolas
Click to expand...
Click to collapse
Do me a favour and flash my package and then upgrade to TWRP 2.6.3-that3. There is flashable version of that in my CROMBi-kk thread. Then we know you are on the latest bootloader and recovery.
Also you seem to be using bluetooth at the same time. That doesn't work well on these devices. Turn off bluetooth as well and let's get the wifi working.
51189868998
sbdags said:
Do me a favour and flash my package and then upgrade to TWRP 2.6.3-that3. There is flashable version of that in my CROMBi-kk thread. Then we know you are on the latest bootloader and recovery.
Also you seem to be using bluetooth at the same time. That doesn't work well on these devices. Turn off bluetooth as well and let's get the wifi working.
Click to expand...
Click to collapse
Hi,
So I went to recovery, wiped everything except external SD. transfered using adb :
cm-4.4-20140309-CROMBikk4.4.2-tf700t_Signed.zip
install it, restart to crombikk (normal installation, not in rom2SD)
restarted to Android, and made a logcat.
Rebooted to recovery and flashed twrp-2.6.3-that3_Signed 1.zip
Rebooted to android and made a logcat
Finally, rebooted to recovery, installed crombi_kkgapps_20140312_Signed.zip and reboot to Android system, connected a google account and tried to download an app from Google. Bluetooth is off (I never switched it on in my previous logcats.)
I then started the playstore application, and Android Terminal Emulator installed correctly.
I then wanted to install a Google product, Chrome Browser in the logcat attached. Download starts and freezes at 9% for 2 minutes then increases to 24% and freezes again. The download is still pending.
I'll post the logcat of the tablet when download stops by itself or it completes. (let's hope it does but it is hanging for 10 minutes now)
Try clearing data and cache on the Play Store and Google Play Services and reboot.
nvuillem said:
Hi,
So I went to recovery, wiped everything except external SD. transfered using adb :
cm-4.4-20140309-CROMBikk4.4.2-tf700t_Signed.zip
install it, restart to crombikk (normal installation, not in rom2SD)
restarted to Android, and made a logcat.
Rebooted to recovery and flashed twrp-2.6.3-that3_Signed 1.zip
Rebooted to android and made a logcat
Finally, rebooted to recovery, installed crombi_kkgapps_20140312_Signed.zip and reboot to Android system, connected a google account and tried to download an app from Google. Bluetooth is off (I never switched it on in my previous logcats.)
I then started the playstore application, and Android Terminal Emulator installed correctly.
I then wanted to install a Google product, Chrome Browser in the logcat attached. Download starts and freezes at 9% for 2 minutes then increases to 24% and freezes again. The download is still pending.
I'll post the logcat of the tablet when download stops by itself or it completes. (let's hope it does but it is hanging for 10 minutes now)
Click to expand...
Click to collapse
Are you sure it's not your router?
sbdags said:
Are you sure it's not your router?
Click to expand...
Click to collapse
Hi,
I tried to download from 3 different locations, with 3 different ISP and modems, and the problem is the same.
I also tried to Clear cache and data of Google services and PlayStore. I still have the problem.
Yesterday, when I flashed everything to reinstall the Rom and the recovery on proper basis, I noticed that some directories are not wiped.
Maybe some files are missing?
Is there any way to restore those directory? (maybe doing a wipe data from the bootloader, but I read at many places that it is not advised...
I also tried to find an application or a thread to test the hardware of the tablet without any success
Thank you for your help
Nicolas
nvuillem said:
Hi,
I tried to download from 3 different locations, with 3 different ISP and modems, and the problem is the same.
I also tried to Clear cache and data of Google services and PlayStore. I still have the problem.
Yesterday, when I flashed everything to reinstall the Rom and the recovery on proper basis, I noticed that some directories are not wiped.
Maybe some files are missing?
Is there any way to restore those directory? (maybe doing a wipe data from the bootloader, but I read at many places that it is not advised...
I also tried to find an application or a thread to test the hardware of the tablet without any success
Thank you for your help
Nicolas
Click to expand...
Click to collapse
You could try a full internal sd card format from inside twrp - warning it can take up to 2 hours to complete. Make sure you have everything you want to keep and rom.zips on external sd as well.
sbdags said:
You could try a full internal sd card format from inside twrp - warning it can take up to 2 hours to complete. Make sure you have everything you want to keep and rom.zips on external sd as well.
Click to expand...
Click to collapse
Hi,
I did the full wipe from the factory (took 90 minutes )
I reinstalled the rom, and I stil have the problem (erro 495 most of the time)
I then downloaded and installed a VPN client and it works. ( I attached the logcat.txt)
There is still something I can't figure out, as it works using a VPN, the issue is probably not related to hardware, but software, and it is not related to the Rom or recovery.
Do you know if Google checks something like device ID when apps are dowloaded from the store?
Thanks
Nicolas
nvuillem said:
Hi,
I did the full wipe from the factory (took 90 minutes )
I reinstalled the rom, and I stil have the problem (erro 495 most of the time)
I then downloaded and installed a VPN client and it works. ( I attached the logcat.txt)
There is still something I can't figure out, as it works using a VPN, the issue is probably not related to hardware, but software, and it is not related to the Rom or recovery.
Do you know if Google checks something like device ID when apps are dowloaded from the store?
Thanks
Nicolas
Click to expand...
Click to collapse
If it works on a VPN then it is more likely related to your country and / or ISP and Google servers.
It is dual boot Windows 10 Genuine plus Android 5.1
It Definitely made a mistake by buying this tablet and i will detail my problems in detail
When i first bought this tablet, it went OK and two many Chinese apps were installed and uninstalled.
My problem started after almost 1 week of usage when my tablet started showing error for my memory card SAFE TO REMOVE android. i tried inserting multiple memory cards but no use. Windows partition never detected memory card till date.
As i bought from gearbest i raised dispute, after that they offered me two options.
First was that i have to send this tablet to China and bear shipping cost of around 25-30 USD (approx rate from India) also after receiving item they will give me full refund, i declined to bear shipping as God knows they will ever say that they have received tablet back or not.
Second they offered me partial refund, initially which started from 30 USD, finally i agreed for 50 USD dollar refund for purchase of 91 USD. guess windows partition was working flawlessly expect for memory card issue.
(NOW THE TECHNICAL PART FOR WHICH I NEEDED URGENT HELP)
After receiving refund i started going through various sites to check how to fix this issue(worse Mistake i believe)
i rooted my tabled( android) with tool .by spzjulien. tablet got rooted but now it is almost not working, touching is not responding, screen is also upside down, almost unable to do anything on android part.
After that i downloaded intel phone flash tool 5.3.4 as it was said for teclast website also i downloaded new android stock rom file Android 5.1 v1.06 for my tablet serial number H5C5. strickly followed procedure but i am facing error as sharing log file below and image of tablet and screenshot of intel phone flash tool i will send you in messages as i am unable to post here.
First i installed iSocUSB-Driver-Setup-1.2.0.exe, then IntelAndroidDrvSetup1.5.0.exe and in last PhoneFlashTool_5.3.2.0_win32.exe.
Then i opened "Phone Flash Tool" , clicked “Browser”button, in pop-up window and loaded the android burning file, then changed “Configuration” content as “update”, enabled development mode and usb debugging, then i connected tablet, it gets detected and then i clicked Start to Flash, tablet gets restart and almost after 4%, it gives me error as log code shared. fastboot error. i dont know how to fix fastboot error.
Kindly please help
Already Posted this Link so many days ago.
http://forum.xda-developers.com/x98...oot-device-t3378613/post66840332#post66840332
No replies please provide any type of assistance as soon as possible.
LOG FILES of intel phone flash FOR ERROR ONLY
05/14/16 01:26:08.975 ERROR : [Auto Update] No update download available
05/14/16 01:27:48.619 ERROR : [Port 1/1/2] Command `"C:\Program Files (x86)\Intel\Phone Flash Tool\fastboot.exe" "-s" " " "flash" "osloader" "C:\teclast x80 H5C5\X80 Plus DualOS(H5C5)-Android5.1-V1.06\Android 固件\loader.efi"` failed
05/14/16 01:27:48.619 ERROR : [Port 1/1/2] Flash failed (Command type: Fastboot)
05/14/16 01:28:07.144 ERROR : [Port 1/1/2] Failed to reboot the device
05/14/16 02:06:12.623 ERROR : [Port 1/1/2] Command `"C:\Program Files (x86)\Intel\Phone Flash Tool\fastboot.exe" "-s" "Default0string" "flash" "bootloader" "C:\teclast x80 H5C5\X80 Plus DualOS(H5C5)-Android5.1-V1.06\Android 固件\bootloader"` failed
05/14/16 02:06:12.623 ERROR : [Port 1/1/2] Flash failed (Command type: Fastboot)
Hello and thank you for using XDA Assist,
you asked the same question in the correct section:
Need help for my teclast x80 plus dual boot device
Thread closed, since XDA Assist is only for pointing members to the correct section and not to give support with the problems.
You're free to bump your other thread.
Kind regards
Trafalgar Square
XDA Assist
As the title suggests - everytime i try to connect my SG6 int to my linux pc i keep getting a .lib error - this has sporadically occured, never had it before - i can sometimes open the phone on the pc - but trying to ...copy,paste, or even delete items from phone results in this error - help needed....thanks upfront
In Android ROMs' developments, I always start with AOSP. It is the root and if I want to do it right, I have to make it work for AOSP first. Putting the AOSP tests in my kernel thread is getting messy. As I would continue my work here for a while. Starting a thread for AOSP seems reasonable.
Here is for sharing of experiences and discussions.
There would be no nightly, weekly or monthy. I would follow the releases of AOSP and keep it as genuine as possible. If you are looking for a feature, there are many nice ROMs out there.
Known Issues:
1. AOSP Camera App The AOSP Camera2 app is not working with the Nexus 7 (2012) which is the only (I think) Nexus device with a Front Camera but not the Back Camera. The new Camera2 app set the back camera as default. I can make the preview shown by a simple overlay configs. But, make it really work would be quite a work. In the app market(s), there are many camera apps already taking care of that and would work flawlessly. I see no reason to waste time on that. 2. "E:unknown command [log]" If you got this message when flashing, don't panic. It's the new "block_image_update()" in recovery cause that. It would do no harm and it would be gone in the next TWRP. 3 Please report.
Tips:
1. DT2W At deep sleep, the idled CPU takes time to resume. If the taps are too close, it might not be recognized. Delay the duration between taps would give you better results. 2. Built-in File Explorer There is an built-in file explorer in AOSP. We can explore the files as well as installing apks.
Its in: Settings > Storage > Explore (under the storage you want. In case of Nexus 7, only the internal and OTG exist.)Change log:
Code:
[COLOR="Blue"]2017/5/3[/COLOR]
- Android-7.1.2_r11 (NHG47L)
[COLOR="Blue"]2017/4/9[/COLOR]
- Android-7.1.2_r5 (N2G47J)
- PerformanceControl: boot up settings fixed
- Fix Wifi hotspot
- Performance patches
[COLOR="Blue"]2017/3/8[/COLOR]
- Android-7.1.1_r28 (N6F26U)
[COLOR="Blue"]2017/2/8[/COLOR]
- Android-7.1.1_r21 (NOF26W)
[COLOR="Blue"]2017/1/6[/COLOR]
- Android-7.1.1_r13 (N6F26Q)
- Camera: Fix video recording
[COLOR="Blue"]2016/12/16[/COLOR]
- Android-7.1.1_r6 (NMF26Q)
- SEPolicy update
[COLOR="Blue"]2016/12/7[/COLOR]
- Android-7.1.1_r4 (NMF26O)
- Fix the Camera
[COLOR="Blue"]2016/11/11[/COLOR]
- Android-7.1.0_r7 (NDE63X)
[COLOR="Blue"]2016/10/24[/COLOR]
- Android-7.1.0_r4 (NDE36P)
- Remove every recovery related resources
[COLOR="Blue"]2016/10/14[/COLOR]
- Android-7.0.0_r14 (NBD90Z)
- Shield the occasional crash in MTP Document provider
- USB and Bluetooth Tethering support enabled
[COLOR="Blue"]2016/9/23[/COLOR]
- Android-7.0.0_r6 (NRD90U)
- latest DC kernel (Android-7.0 branch)
- PerformanceControl: version 2.1.6
- Find a way to fix the hwcomposer for video/audio playback, need to review later
- A few sepolicy patches for Gapps and Mediaserver
- SELinux: Enforcing
Downloads: :highfive:
Hosts: Android File Host MEGA mirror: 百度网盘
Note: I only tested it in TWRP 3.0.2.
PerformanceControl app requires ROOT access.
Root access can be obtained by the systemless SuperSU from @Chainfire.
Gapps: opengapps (pico) and BaNKs Gapps for 7.0 are tested
Sources:
Sources in github
Credits: :good:
** Definitely the AOSP
** The AndroidFielHost provide a FREE host with no limits and expiration.
** All the developers who help the Nexus 7 (2012) development
** All those who donate and/or help the developers. Giving us the resources and reason to carry on.
Donations: :angel:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Discussions
Anyone has any idea are welcome to post here
DT2W
Sometimes it won't wakeup after a long DEEP_SLEEP
When volume buttons are also enabled for wakeup. It won't work too. Seems there are situations "soft pwr button press" won't work.
Fail after reboot
Code:
Supported API: 3
E: unknown fs_type "f2fs" for /cache
E: Can't mount /cache/recovery/last_locale
Some of you might encounter the above message after reboot. I never encountered before but there is definitely something wrong.
@millosr found that it was the recovery being replaced. I think that make sense and I want to study why.
I looked into the source. In the original AOSP, an OTA might come with a recovery patch. Stated in the build/core/Makefile "boot.img + recovery-from-boot.p + recovery-resource.dat = recovery.img"
It would generate the "recovery.img by the above formula itself. Custom ROMs usually won't carry a recovery and this part was usual ignored.
There is a warning in TWRP before reboot. Some of you might not read clearly and slide to continue immediately. In that case, the above mentioned recovery.img will be generated and flashed to the /recovery partition. Everything seems normal but after reboot.
When the script kick in, it would execute the "new" recovery. As a normal recovery, it would load the fstab and try to mount the partitions. The current fstab version is API 3. Almost all ROMs (no matter how close to AOSP) would have F2FS support. When we open a typical fstab:
Code:
/dev/block/platform/sdhci-tegra.3/by-name/APP /system ext4 ro wait
/dev/block/platform/sdhci-tegra.3/by-name/CAC /cache f2fs noatime,nosuid,nodev,nodiratime,discard,inline_xattr,inline_data,inline_dentry wait,check
/dev/block/platform/sdhci-tegra.3/by-name/CAC /cache ext4 noatime,nosuid,nodev,nomblk_io_submit,journal_async_commit,errors=panic wait,check
Note that the second line is the declaration for the /cache in f2fs. Stock AOSP recovery doesn't support f2fs. That's why the above error shown. Since it fail to mount /cache, the last_locale is not loaded and recovery would hang.
How to recover?
Naturally, you have to flash TWRP again.
First of all, you need to boot into bootloader (fastboot mode)
Some init.xxx.rc might start adbd earlier and in this case "adb reboot bootloader" would do the job.
If adbd was not started before the hang, the command won't work. In this case you can only use the pwr+vol. down combination.
If it is still hanging, the buttons might not work. Press the power button continuously might lead to repeatedly reboot. It is better to make sure the device is OFF first.
1. Connect to a charger.
2. Press the power button until you see the charging image
3. Release the power button immediately.
4. After that, press the volume down button first, and then the power button.
It would go to the bootloader.
Note: /system is not really formatted during flashing. To make sure no residue left in /system, it is better to wipe the /system before flashing.
For ROM builders, there is a flag BOARD_USES_FULL_RECOVERY_IMAGE. Set it to true will stop the generation of recovery-resource.dat (in /system/etc) and break the above formula.
Does D2TW require the digitizer to remain permanently on? Trying to guage the impact of such a feature before I turn it on.
Nintonito said:
Does D2TW require the digitizer to remain permanently on? Trying to guage the impact of such a feature before I turn it on.
Click to expand...
Click to collapse
obviously.
---------- Post added at 09:52 AM ---------- Previous post was at 09:46 AM ----------
@daniel_hk good to see a separate thread. Will test this build this weekend as i am already on grouper.
：手指划线：
Thanks for bringing nougat to our beloved Nexus 7!!!
I just flashed but no matter which gapps I use, I can't make playstore and google play services installed.
Any hints?
Thanks.
ho0o0o11111 said:
Thanks for bringing nougat to our beloved Nexus 7!!!
I just flashed but no matter which gapps I use, I can't make playstore and google play services installed.
Any hints?
Thanks.
Click to expand...
Click to collapse
If you want anyone to help, you have to provide details.
The tested Gapps' are listed in OP. "No matter which gapps" ?
Can you tell us which one and version you actually tried?
What's your flashing procedures? etc.
daniel_hk said:
If you want anyone to help, you have to provide details.
The tested Gapps' are listed in OP. "No matter which gapps" ?
Can you tell us which one and version you actually tried?
What's your flashing procedures? etc.
Click to expand...
Click to collapse
Procedures (clean flash)
- rom
- gapps
- supersu
- reboot
- no playstore/play services have been installed after reboot
I used explorer to check and found that those gapps are installed (e.g. Vending.apk) but their sizes are all in 0kb.
the gapps I used were opengapps PICO and Banks. (I tried both. All after clean flash)
Finally I got playstore installed as follows
- flash rom/gapps/supersu
- reboot
- uninstall some system apps I don't need
- flash gapps again
then the playstore appears in app drawer. (And it works)
However, I have another big problem after reboot.
My device is now stuck in bootloop after splashscreen.
It just shows message as follows and I can't enter recovery/bootloader.
Supported API: 3
E: unknown fs_type "f2fs" for /cache
E: Can't mount /cache/recovery/last_locale
In the following page I found a solution "adb reboot bootloader" but I can't even enter bootloader/fastboot mode.
http://forum.xda-developers.com/nex...ip-linux-tegra-nv-3-4-bringup-t3128195/page46
still trying...
Any helps would be appreciated.
Thanks.
ho0o0o11111 said:
Procedures (clean flash)
- rom
- gapps
- supersu
- reboot
- no playstore/play services have been installed after reboot
I used explorer to check and found that those gapps are installed (e.g. Vending.apk) but their sizes are all in 0kb.
the gapps I used were opengapps PICO and Banks. (I tried both. All after clean flash)
Finally I got playstore installed as follows
- flash rom/gapps/supersu
- reboot
- uninstall some system apps I don't need
- flash gapps again
then the playstore appears in app drawer. (And it works)
However, I have another big problem after reboot.
My device is now stuck in bootloop after splashscreen.
It just shows message as follows and I can't enter recovery/bootloader.
Supported API: 3
E: unknown fs_type "f2fs" for /cache
E: Can't mount /cache/recovery/last_locale
In the following page I found a solution "adb reboot bootloader" but I can't even enter bootloader/fastboot mode.
http://forum.xda-developers.com/nex...ip-linux-tegra-nv-3-4-bringup-t3128195/page46
still trying...
Any helps would be appreciated.
Thanks.
Click to expand...
Click to collapse
I think you are not using the Official TWRP. There are similar reports having the same problem for other MM ROMs too.
You may try the Official TWRP 3.0.2 here (follow the link if you have a Tilapia) and flash everything again.
You might have corrupted your /cache and /data. It is better format them (to ext4 or f2fs) in the Official TWRP again.
Good luck!
daniel_hk said:
I think you are not using the Official TWRP. There are similar reports having the same problem for other MM ROMs too.
You may try the Official TWRP 3.0.2 here (follow the link if you have a Tilapia) and flash everything again.
You might have corrupted your /cache and /data. It is better format them (to ext4 or f2fs) in the Official TWRP again.
Good luck!
Click to expand...
Click to collapse
Thanks for your suggestion but the TWRP I used were downloaded from TWRP's official website, so I supposed it is official version.
I can't flash TWRP again as I am still struggling to enter bootloader mode.
ho0o0o11111 said:
Thanks for your suggestion but the TWRP I used were downloaded from TWRP's official website, so I supposed it is official version.
I can't flash TWRP again as I am still struggling to enter bootloader mode.
Click to expand...
Click to collapse
Which version? eariler version might have a wrong fstab which have issue on f2fs.
Make sure you got the latest version 3.0.2
You can't go to boot loader?
That means you press pwr+vol down and it won't reboot to bootloader?
That's strange.
"adb reboot bootloader" only work if the adbd is up. That means you can use "adb devices" to check the existance of your device.
You may try this:
1. connect to the charger
2. pressing the pwr button for > 8 seconds.
See if the tablet reboot. If yes, it would boot into charging mode. Pwr+vol down again would work.
If it doesn't reboot after you pressed say 20 seconds, you need to remove the battery.
Good luck!
@daniel_hk
Thanks for the new AOSP build Daniel. Nice work fixing the hardware decoder, my Netflix is now working and I was able to play one of my MP4 movies with BS Player in HW mode. I've been changing back and forth between your first AOSP 7 build and your DU 7 build with dirty flashes. With this build I decided to clean flash and at first things were very sluggish but settled down after a reboot and probably after Google finished whatever it does in the background. LOL Aside from a few occasional random force closes, it's running pretty well.
A couple of observations:
As mentioned, I did a clean install with this build. I'm using official TWRP 3.02 and installed the rom and 7.0 Open Gapps nano 20160915 at the same time and when it booted up for the first time, there were no gapps installed. I powered down and then went back into TWRP and reflashed the gapps, this time they were there upon reboot. Surprisingly, I didn't have to set permissions for Google Play or Play Store, as they were already correctly set??? I did run into a snag when trying to download apps from PS, clearing the data for the download manager app solved that problem for me.
I installed a camera app (HD Camera) from Play Store and it works but when I use my phone's camera, it reminds me how crappy the N7 camera is. LOL
After setting things up, I wanted to try phhsuperuser (no Magisk) to root and it went fine. All of my apps that require root worked...except Titanium Backup. I tried uninstalling/reinstalling both phhsuperuser and Titanium but couldn't get it to work. I rely on Titanium quite a bit, so I flashed Supersu 2.78 and all's well.
Thanks again.
Mike T
Do games work on this rom?
Hi,
This is the best 7.0 ROM so far !!!
Smooth, video HW decoding is working, games work perfect.
As webdroidmt said I also had to reflash GAPPS to have GAPPS installed and i had to give proper permissions on Google Play service to stop seeing the "google play service stop" message.
All Apps/games that i installed are working properly.
Thanks Daniel_hk for your work
Many thanks Works like a charm !
Is SEpolicy restrictive in your build? (I cannot see it from Settings -> about tablet)
.
Can you post your manifest on Your Github for easier building ?
Hi, currently testing your ROM, looks awesome!
When Browsing the web with Chrome, loads and loads of SELinux denials, mostly when the page loads:
Code:
09-26 13:34:20.990 4424 4424 W Thread-4: type=1400 audit(0.0:174): avc: denied { ioctl } for path="socket:[45348]" dev="sockfs" ino=45348 ioctlcmd=8b1b scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:r:untrusted_app:s0:c512,c768 tclass=udp_socket permissive=0
This message times * 100 for every page load.
paasoares said:
Hi,
This is the best 7.0 ROM so far !!!
Smooth, video HW decoding is working, games work perfect.
As webdroidmt said I also had to reflash GAPPS to have GAPPS installed and i had to give proper permissions on Google Play service to stop seeing the "google play service stop" message.
All Apps/games that i installed are working properly.
Thanks Daniel_hk for your work
Click to expand...
Click to collapse
In any case, it's a good practice to read the console after flash anything. There might already be essential messages which not necessarily in red.
I also experience SuperSU need to flash again. I just found out something that might help. Seems SuperSU would use the cache to start a checking process in the next boot. I don't know if it would help gapps too.
1. Try factory reset before flashing.
2. Flash ROM+Gapps+SuperSU
3. After that don't do wipe cache/d-cahce again. (factory reset already include this action)
Good luck!
3yan said:
Many thanks Works like a charm !
Is SEpolicy restrictive in your build? (I cannot see it from Settings -> about tablet)
.
Can you post your manifest on Your Github for easier building ?
Click to expand...
Click to collapse
I think you meant "Enforcing". Yes, it is enforcing. Only some Custom ROM would show this in About but not AOSP.
There is a shell command "getenforce" which you can check the SEPolicy status.
If you read the OP, you would know its an AOSP without any mod/tweak, just porting. You can get the manifest and all the helps in https://source.android.com.
Good luck!
fat-lobyte said:
Hi, currently testing your ROM, looks awesome!
When Browsing the web with Chrome, loads and loads of SELinux denials, mostly when the page loads:
Code:
09-26 13:34:20.990 4424 4424 W Thread-4: type=1400 audit(0.0:174): avc: denied { ioctl } for path="socket:[45348]" dev="sockfs" ino=45348 ioctlcmd=8b1b scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:r:untrusted_app:s0:c512,c768 tclass=udp_socket permissive=0
This message times * 100 for every page load.
Click to expand...
Click to collapse
Chrome has many versions and it should not be an untrusted app. I'm testing the CarbonROM which has a bloated Chrome and being treated as isolated app. It might take time for those UID's being properly handled.
I already included some extra permissions which would be include in my later builds.
Anyway, we would encounter denials more often in apps. That's what newer Android intent to do.
Code:
09-26 19:14:02.119 189 344 D hwcomposer: hotplug_thread: processing control fd
09-26 19:14:02.119 189 344 I hwcomposer: hotplug: connected = 0
09-26 19:14:03.469 503 579 W AlarmManager: Unrecognized alarm listener [email protected]
09-26 19:14:03.469 503 579 E WifiScanner: listener cannot be found
09-26 19:14:03.478 677 677 E wpa_supplicant: wlan0: Failed to schedule PNO
09-26 19:14:03.481 503 581 E SupplicantWifiScannerImpl: PNO state change to true failed
09-26 19:14:03.481 503 581 E SupplicantWifiScannerImpl: Failed to start PNO scan
09-26 19:14:03.484 503 581 W SupplicantWifiScannerImpl: No PNO scan running
09-26 19:14:03.486 503 579 E WifiConnectivityManager: PnoScanListener onFailure: reason: -1 description: pno scan failed
This is repeated every 5 minutes during deep sleep. I'm not an expert, but this probably doesn't help with battery drain
I'm also having some touch sensitivity issues when coming out of deep sleep or off the charger. I have to do some more testing, then I will have more details.
I wanted to try this 'Sept 23' ROM as it should play video OK: in the end I got it to work, and I can now indeed play video in some video based apps that did not work before. I used the older DU ROM and also the nAOSP ROM of millosr. There video does not work yet.
But with this Sept23 ROM I had a fight with Gapps to get it to work... First the Gapps I normally use failed to install in TWRP. At least, that is what I think I saw: the progress bar suddenly jumps ahead as if the install process was broken off somehow. So I again clean wiped all and now used opengaps-pico. That installed fine, but on first boot, no gapps. So I again installed opengapps and now finally I had working playstore. Strange, I never ran into something like this before (I am mostly active on Xperia S with nAOSP).
But the story ends well, as my video now works: great job !
fat-lobyte said:
Code:
09-26 19:14:02.119 189 344 D hwcomposer: hotplug_thread: processing control fd
09-26 19:14:02.119 189 344 I hwcomposer: hotplug: connected = 0
09-26 19:14:03.469 503 579 W AlarmManager: Unrecognized alarm listener [email protected]
09-26 19:14:03.469 503 579 E WifiScanner: listener cannot be found
09-26 19:14:03.478 677 677 E wpa_supplicant: wlan0: Failed to schedule PNO
09-26 19:14:03.481 503 581 E SupplicantWifiScannerImpl: PNO state change to true failed
09-26 19:14:03.481 503 581 E SupplicantWifiScannerImpl: Failed to start PNO scan
09-26 19:14:03.484 503 581 W SupplicantWifiScannerImpl: No PNO scan running
09-26 19:14:03.486 503 579 E WifiConnectivityManager: PnoScanListener onFailure: reason: -1 description: pno scan failed
This is repeated every 5 minutes during deep sleep. I'm not an expert, but this probably doesn't help with battery drain
I'm also having some touch sensitivity issues when coming out of deep sleep or off the charger. I have to do some more testing, then I will have more details.
Click to expand...
Click to collapse
Did you set "keep wi-fi on during deep sleep" to NEVER?
My tablet drain 5% during this night (about 8 hours), so i guess this is normal/acceptable